DP视频调试方法（持续更新）

1. A Sink device may toggle the HPD signal to interrupt the Source device which would prompt an AUX CH request transaction.
2. AUX CH provides a data rate of 1Mbps over the supported cable lengths of up to 15m and longer. Each transaction takes no more than 500us with a maximum burst data size of 16 bytes.
3. Upon Hot Plug detection, the Source device configures the link through link training. The correct number oflanes is enabled at the correct link rate with the correct drive current and equalization level through the handshake between DisplayPort transmitter and receiver via AUX CH.
4. Manchester-II coding is used as the channel coding for the AUX CH.差分曼彻斯特编码也是一种双相码，和曼彻斯特码不同的是，这种编码的码元中间的电平转换边只作为定时信号，而不表示数据。数据的表示在与每一位开始处是否有电平转换，有电平转换表示0，无电平转换表示1。差分曼彻斯特码用在令牌环网中 。这两种双相码的每一个码元都要调制为两个不同的电平，因而调制速率是码元速率的2倍。这无疑对信道的带宽提出了更高的要求，所以实现起来更困难也更昂贵。但由于其良好的抗噪声特性和自定时能力因此在局域网中仍被广泛应用 。
5. The correct number of lanes is enabled at the correct link rate with the correct drive current and equalization level through the handshake between DisplayPort transmitter and receiver via AUX CH.

6. https://zhuanlan.zhihu.com/p/150644951