1. 在浏览器中输入 http://<LSP ip addr>
2.登陆LSP配置页面,选择configure server, 选择 Configure individual services
3.选择configure LSP选项,选择This is a local survivable processor(LSP)
Registration address at the main server (CLAN or PE Address) | ||
File Synchronization address at the main cluster ( PE Address) | ||
* only if servers are duplicated |
图中Registration address是话机注册的CM的IP地址(CLAN),File synchronization address是可以用SAT或telnet登陆的同一CM的IP地址(PE)
4.使用SAT或telnet连接CM 192.168.10.101,输入命令change node-names ip,在列表中加入LSP的名称(可在LSP网页上设置)及ip地址
5.输入命令add survivable-processor <xx> command, where <xx> is a node name of an LSP added in Step 4.
6. Change the gateway automatic recovery rule. Issue the change system-parameters mg-recovery-rule <xx> command, where <xx> is the number of the recovery rule: Migrate H.248 MG to primary: 0-active-calls
7. Add a recovery rule on the G700 Media Gateway. Issue the change media-gateway <xx> command, where <xx> is the number of the G700 Media Gateway. Enter the following value: Recovery Rule: 1
8. Telnet CM连接的Media Gateway,将LSP IP address 加入 MGC list, 输入命令 set mgc list <LSP IP Address>,如果成功会显示Done!。 输入命令show mgc list, 可以看到list中出现了LSP的ip地址
9. 设置搜索primary controller的时间,在media gateway中输入命令 set reset-times primary-search 5, 然后输入命令show recovery,可以看到Primary Search : 5
10. 在media gateway中输入命令set survivable-call-engine,启用survivable call engine
配置完毕,当CM down掉之后,话机会自动到LSP上注册。 LSP和CM之间会自动同步station的信息