ThreadX打印软件定时器信息方法

0 工具准备

ThreadX V6.2.0

1 ThreadX打印软件定时器信息方法

示例代码：

int ostimer(void)
{
    ULONG i;
    TX_TIMER *timer;

    if (_tx_timer_created_count == 0)
    {
        printf("don't have any timer!\r\n");
        return 0;
    }

    printf("+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\r\n");
    printf("Timer thread name       : %s\r\n", _tx_timer_thread.tx_thread_name);
    printf("Timer thread pri        : %u\r\n", _tx_timer_thread.tx_thread_priority);
    printf("Timer thread stack size : %lu Byte\r\n", _tx_timer_thread.tx_thread_stack_size);
    printf("Timer thread stack current used : %lu Byte\r\n", (u32)_tx_timer_thread.tx_thread_stack_end - (u32)_tx_timer_thread.tx_thread_stack_ptr);
    printf("Timer thread stack max used     : %lu Byte\r\n", (u32)_tx_timer_thread.tx_thread_stack_end - (u32)_tx_timer_thread.tx_thread_stack_highest_ptr);
    printf("+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\r\n");
    printf("No.  Repeat tick  Remain tick  Run count  Adjust count  Name\r\n");
    timer = _tx_timer_created_ptr;
    for (i = 0; i < _tx_timer_created_count; i++)
    {

        printf("%-3u  %-10u   %-10u   %-10u %-10u    %s\r\n",
                   i + 1,
                   timer->tx_timer_internal.tx_timer_internal_re_initialize_ticks,
                   timer->tx_timer_internal.tx_timer_internal_remaining_ticks,
                   timer->tx_timer_performance_expiration_count,
                   timer->tx_timer_performance__expiration_adjust_count,
                   timer->tx_timer_name);
        timer = timer->tx_timer_created_previous;
    }

    return 0;
}

说明：
以上代码首先打印软件定时器线程信息，包括线程名称、线程优先级、线程栈大小、线程栈最大使用量、线程栈当前使用量。
然后遍历定时器链表，打印定时器信息，依次是序号、重复tick（周期）、剩余tick、运行次数、调整次数、软件定时器名称。
原理介绍：
（1）ThreadX软件定时器数据结构采用双向链表，链表头指针为_tx_timer_created_ptr，每新增一个软件定时器都在表头前一个位置插入。知道了软件定时器的连接结构，我们就可以遍历所有的软件定时器。
（2）_tx_timer_created_count表示软件定时器的数量。
注：
要知道运行次数、调整次数需要在tx_user.h加入以下定义

#define TX_TIMER_ENABLE_PERFORMANCE_INFO

打印效果展示：