Create a new job (in shared HR), Errors: 'ID&ID for the flexfield segment &SEGMENT does not exist in

最新推荐文章于 2021-03-09 17:51:49 发布
最新推荐文章于 2021-03-09 17:51:49 发布
阅读量494 收藏
点赞数
分类专栏： EBS运维 PO 文章标签： PO EBS运维
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/kikiwhq/article/details/78686443
版权
EBS运维 同时被 2 个专栏收录
64 篇文章 5 订阅
订阅专栏
PO
21 篇文章 0 订阅
订阅专栏


转到底部转到底部

In this Document

Symptoms
 Cause
 Solution

APPLIES TO:

Oracle Human Resources - Version 11.5.10.2 and later
Information in this document applies to any platform.

SYMPTOMS


When attempting to create a new job (in shared HR),  the following error occurs:

ID&ID for the flexfield segment &SEGMENT does not exist in value set &VALUESET


Additional information - when the new value has a name without '.' it's ok but when in the name I put '.' it's in error. For exemple for "Asis Compras Grles" is ok but for "Asis.Compras.Grles" is not ok.

Steps To Reproduce:
The issue can be reproduced at will with the following steps:

1. <responsibility unknown>
2. Setup->Personnel->Jobs
3. Try and create a new job

CAUSE

Issue caused by character '.' in the job name.

 

SOLUTION

Change key flexfield seperator to a character different from a period (.)

1. System Administrator : Application > Flexfield > Key > Segments
2. Query the job flexfield
3. Unfreeze
4. Change seperator to pipe (|) , recompile the flexfield and retest




转到底部转到底部

In this Document

Symptoms
 Cause
 Solution

APPLIES TO:

Oracle Human Resources - Version 11.5.10.2 and later
Information in this document applies to any platform.

SYMPTOMS


When attempting to create a new job (in shared HR),  the following error occurs:

ID&ID for the flexfield segment &SEGMENT does not exist in value set &VALUESET


Additional information - when the new value has a name without '.' it's ok but when in the name I put '.' it's in error. For exemple for "Asis Compras Grles" is ok but for "Asis.Compras.Grles" is not ok.

Steps To Reproduce:
The issue can be reproduced at will with the following steps:

1. <responsibility unknown>
2. Setup->Personnel->Jobs
3. Try and create a new job

CAUSE

Issue caused by character '.' in the job name.

 

SOLUTION

Change key flexfield seperator to a character different from a period (.)

1. System Administrator : Application > Flexfield > Key > Segments
2. Query the job flexfield
3. Unfreeze
4. Change seperator to pipe (|) , recompile the flexfield and retest


转到底部转到底部

In this Document

Symptoms
 Cause
 Solution

APPLIES TO:

Oracle Human Resources - Version 11.5.10.2 and later
Information in this document applies to any platform.

SYMPTOMS


When attempting to create a new job (in shared HR),  the following error occurs:

ID&ID for the flexfield segment &SEGMENT does not exist in value set &VALUESET


Additional information - when the new value has a name without '.' it's ok but when in the name I put '.' it's in error. For exemple for "Asis Compras Grles" is ok but for "Asis.Compras.Grles" is not ok.

Steps To Reproduce:
The issue can be reproduced at will with the following steps:

1. <responsibility unknown>
2. Setup->Personnel->Jobs
3. Try and create a new job

CAUSE

Issue caused by character '.' in the job name.

 

SOLUTION

Change key flexfield seperator to a character different from a period (.)

1. System Administrator : Application > Flexfield > Key > Segments
2. Query the job flexfield
3. Unfreeze
4. Change seperator to pipe (|) , recompile the flexfield and retest

转到底部转到底部

In this Document

Symptoms
 Cause
 Solution

APPLIES TO:

Oracle Human Resources - Version 11.5.10.2 and later
Information in this document applies to any platform.

SYMPTOMS


When attempting to create a new job (in shared HR),  the following error occurs:

ID&ID for the flexfield segment &SEGMENT does not exist in value set &VALUESET


Additional information - when the new value has a name without '.' it's ok but when in the name I put '.' it's in error. For exemple for "Asis Compras Grles" is ok but for "Asis.Compras.Grles" is not ok.

Steps To Reproduce:
The issue can be reproduced at will with the following steps:

1. <responsibility unknown>
2. Setup->Personnel->Jobs
3. Try and create a new job

CAUSE

Issue caused by character '.' in the job name.

 

SOLUTION

Change key flexfield seperator to a character different from a period (.)

1. System Administrator : Application > Flexfield > Key > Segments
2. Query the job flexfield
3. Unfreeze
4. Change seperator to pipe (|) , recompile the flexfield and retest

kikiwhq
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
value xxx for the flexfield segment customer:does not exist in the value set xxxx
cuisong5044的博客
05-28 1518
value xxx(customer_name) for the flexfield segment customer:does not exist in the value set xxxx(OM_CUST_NAME)一開始懷...
【error】see previous definition of原因及解决办法
08-08 1万+
报错：error: previous definition of 原因如下： 现在有A.h B.h C.h 三个头文件 其中 B.h中 #include<A.h> C.h中 #include<B.h>且#include<A.h> 这样对于C.h来说，C已经include了B.h，而B.h又已经include了A.h 所以C.h include<A.h&gt...
弹性域报表实例(四）
congjiyin7250的博客
07-18 130
报表 5：多结构的主 - 明细报表[@more@]This example illustrates how to build a master/detail report onmultiple flexfield structu...
Oracle Online Patching报错"This is not a RAC setup. OPatch cannot determine the local node name"
PiscesCanon的博客
05-10 10
Oracle Online Patching报错"This is not a RAC setup. OPatch cannot determine the local node name" 问题描述 Oracle 11.2.0.4.0有一个BUG为 Bug 18034737 - Tracefiles from wxxx space management slave processes a...
Oracle 错误总结及问题解决 ORA
热门推荐
基于Oracle11G
07-08 18万+
ORA 错误大全
Key was created with errors: Warning: JKS 密钥库使用专用格式。android Studio打包报错
01-03
Key was created with errors: Warning: JKS 密钥库使用专用格式。建议使用 “keytool -importkeystore -srckeystore E:\lvchuang\lvchuang.jks -destkeystore E:\lvchuang\lvchuang.jks -deststoretype pkcs12” ...
A Segment-Wise Method for Pseudo Periodic Time Series Prediction
02-08
In many applications, the data in time series appears highly periodic, but never exactly repeats itself. Such series are called pseudo periodic time series. The prediction of pseudo periodic time ...
DOA estimation based on fourth-order cumulants in the presence of sensor gain-phase errors
02-21
A method based on fourth-order cumulants (FOC) for direction-of-arrival (DOA) estimation in the presence of sensor gain-phase errors is presented. This method can be applied in the scenario that the ...
MATLAB.zip_In the Frame_doppler mimo_mimo_zero forcing rate_zero
09-21
A 2by3 MIMO model using Simulink. The decoder uses zero forcing algorithm. Set in the workspace the modulation ... Included in the file a BER session with multiple runs and a figure for several runs.
Decoupling of the position and angular errors in laser pointing with a neural network method
02-21
In laser-pointing-related applications, when only the centroid of a laser spot is considered, then the position and angular errors of the laser beam are often coupled together. In this study, the ...
12C ORA-错误汇总14 ORA-29250 to ORA-32799
badman250的专栏
03-02 3万+
ORA-29250: Invalid index specifed in call to dbms_sql.bind_array Cause: An invalid index was specified in a call to bind_array of dbms_sql. The index may have been null or of an improper value. Act
php从内存中获取源码_php 内存共享shmop源码阅读
weixin_36074841的博客
03-09 160
多进程通信的时候，会涉及到共享内存。shmop_open()创建或打开一个内存块PHP_FUNCTION(shmop_open){long key, mode, size;struct php_shmop *shmop;struct shmid_ds shm;int rsid;char *flags;int flags_len;//解析传PHP进来的参数if (zend_parse_paramet...
oracle11g R2 出现新增的表在导出的时候报EXP-00011: xx does not exist
欧辰的专栏
04-25 3950
先来看一下例子。我们创建一张表T2。  Sql代码   SQL> create table t2 (n number);     Table created.     SQL> desc t2      Name                                      Null?    Type      -------------------
linux table of contents
juliaputao的专栏
02-05 5072
linux Table of Contents 1 linux 1.1 proc filesystem 1.1.1 /proc 1.1.1.1 /proc/meminfo1.1.1.2 /proc/stat1.1.1.3 /proc/swaps1.1.1.4 /proc/cmdline1.1.1.5 /proc/uptime1.1.1.6 /proc/versio
Oracle11gR2deferredsegmentcreation与expimp说明
rede
03-27 379
原 Oracle 11gR2 deferred segment creation 与 exp/imp 说明https://blog.csdn.net/tianlesoftware/article/details/6603608版权声明： https://blog.csdn.net/tianlesoftware/article/details/6603608 一. deferred segmen...
Xcode打包上传时报错 ： ERROR ITMS-90087、 ERROR ITMS-90209、 ERROR ITMS-90125
SHUYUANZHAORUI的博客
08-08 1320
新项目打包上传时遇到 问题： ERROR ITMS-90087: "Unsupported Architectures. The executable for iOSOCR.app/Frameworks/AipBase.framework contains unsupported architectures '[x86_64, i386]'." ERROR ITMS-90209: "Inv
package org.assertj.core.util does not exist和2种解决办法
放眼长期，稳中求进；知行合一，日拱一卒
09-06 7307
习惯性用 Guava中的Lists工具，构造 list，省去泛型的烦恼。 List<ContractAttachment> archiveContractAttachmentList = Lists.newArrayList(); 但是，打包的时候，经常提示： package org.assertj.core.util does not exist 那是因为，引入的...
Oracle数据库常见错误操作及解决方案
阿达7是爬虫
05-29 1084
ORA-01650:unable to extend rollback segment NAME by NUM intablespace NAME 产生原因： 上述ORACLE错误为回滚段表空间不足引起的，这也是ORACLE数据管理员最常见的ORACLE错误信息。当用户在做一个非常庞大的数据操作导致现有回滚段的不足，使可分配用的回滚段表空间已满，无法再进行分配，就会出现上述的错误。 解决方式
AIR 15.0 提交 APPSTORE 错误 ERROR ITMS-9000: INVALID SEGMENT ALIGNMENT
wushungui的专栏
10-31 1111
http://zengrong.net/post/2165.htm/comment-page-1点击打开链接
execute raise ProgrammingError( mysql.connector.errors.ProgrammingError: Not all parameters were used in the SQL statement
最新发布
06-07
这个错误通常发生在使用参数化 SQL 语句时，语句中的参数和提供的参数数量不匹配。这可能是因为你在 SQL 语句中使用了更多的参数，或者是因为你没有正确地传递参数。为了解决这个问题，你可以检查 SQL 语句和提供的...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值