主要AVOptions
公有AVOptions
-preset
主要用来调节编码速度和质量的平衡，虽然libx264和h264_nvenc都有此参数，但是该参数的可选项却不完全相同：
preset是通过设置一系列编码参数来实现调节编码速度和质量的效果的，
e.g. -preset faster 是做了如下设置 --no-mixed-refs --rc-lookahead 20 --ref 2 --subme 4 --weightp 1
详细信息见文章最后一章的x264 encoding options。
libx264 有10个选项
速度由快到慢，速度越慢，质量越好，压缩比越大；默认是medium。
- ultrafast
- superfast
- veryfast
- faster
- fast
- medium
- slow
- slower
- veryslow
- placebo
h264_nvenc 有11个选项
默认是medium。
- slow
- medium
- fast
- hp
- hq
- bd
- ll
- llhq
- llhp
- lossless
- losslesshp
针对 libx264做过简单的各选项对比测试，结果如下图
-profile
用来设置画质级别， 默认级别为 high：
- Baseline Profile：基本画质。支持I/P 帧，只支持无交错（Progressive）和CAVLC；
- Main profile：主流画质。提供I/P/B 帧，支持无交错（Progressive）和交错（Interlaced）， 也支持CAVLC 和CABAC 的支持；
- High profile：高级画质。在main Profile 的基础上增加了8x8内部预测、自定义量化、 无损视频编码和更多的YUV 格式；
H.264 Baseline profile和Main profile都是针对8位样本数据、4:2:0格式(YUV)的视频序列。在相同配置情况下，High profile（HP）可以比Main profile（MP）降低10%的码率。 根据应用领域的不同，Baseline profile多应用于实时通信领域，Main profile多应用于流媒体领域，High profile则多应用于广电和存储领域。
除了这三项之外，high还衍生出了 high10、 high422、 high444、high444p 等参数。。。。。
该参数覆盖的用户设置项见文章最后一章的x264 encoding options。
-level
-crf -cq
crf可以根据视频的运动和静止动态的进行压缩。
与crf、cq、qp、vbr、cbr相关的解析可以参考：Understanding Rate Control Modes (x264, x265, vpx) 和 CRF Guide (Constant Rate Factor in x264 and x265)
libx264
-crf d Select the quality for constant quality mode (from -1 to FLT_MAX) (default -1)
h264_nvenc
-cq Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0)
-qp
类似于
crf,但相同比特率下质量更差，建议使用crf
libx264
Constant quantization parameter rate control method (from -1 to INT_MAX) (default -1)
h264_nvenc
Constant quantization parameter rate control method (from -1 to 51) (default -1)
libx264 专有参数
-tune
为特定类型的源或情况调整设置
主要参数有
- film （ 电影、真人类型）
- animation （动画）
- grain （需要保留大量的grain时用，高比特率编码）
- stillimage （静态图像编码时使用）
- psnr （为提高psnr做了优化的参数）
- ssim （为提高ssim做了优化的参数）
- fastdecode （可以快速解码的参数）
- zerolatency （零延迟，用在需要非常低的延迟的情况下，比如电视电话会议的编码）
详细 help 信息
libx264 AVOptions
查看指令
ffmpeg -h encoder=libx264
ffmpeg version 4.1 Copyright (c) 2000-2018 the FFmpeg developers
built with Apple LLVM version 10.0.0 (clang-1000.11.45.5)
configuration: --prefix=/usr/local/Cellar/ffmpeg/4.1_1 --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gpl --enable-libmp3lame --enable-libopus --enable-libsnappy --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-opencl --enable-videotoolbox
libavutil 56. 22.100 / 56. 22.100
libavcodec 58. 35.100 / 58. 35.100
libavformat 58. 20.100 / 58. 20.100
libavdevice 58. 5.100 / 58. 5.100
libavfilter 7. 40.101 / 7. 40.101
libavresample 4. 0. 0 / 4. 0. 0
libswscale 5. 3.100 / 5. 3.100
libswresample 3. 3.100 / 3. 3.100
libpostproc 55. 3.100 / 55. 3.100
Encoder libx264 [libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
General capabilities: delay threads
Threading capabilities: auto
Supported pixel formats: yuv420p yuvj420p yuv422p yuvj422p yuv444p yuvj444p nv12 nv16 nv21 yuv420p10le yuv422p10le yuv444p10le nv20le
libx264 AVOptions:
-preset <string> E..V..... Set the encoding preset (cf. x264 --fullhelp) (default "medium")
-tune <string> E..V..... Tune the encoding params (cf. x264 --fullhelp)
-profile <string> E..V..... Set profile restrictions (cf. x264 --fullhelp)
-fastfirstpass <boolean> E..V..... Use fast settings when encoding first pass (default true)
-level <string> E..V..... Specify level (as defined by Annex A)
-passlogfile <string> E..V..... Filename for 2 pass stats
-wpredp <string> E..V..... Weighted prediction for P-frames
-a53cc <boolean> E..V..... Use A53 Closed Captions (if available) (default true)
-x264opts <string> E..V..... x264 options
-crf <float> E..V..... Select the quality for constant quality mode (from -1 to FLT_MAX) (default -1)
-crf_max <float> E..V..... In CRF mode, prevents VBV from lowering quality beyond this point. (from -1 to FLT_MAX) (default -1)
-qp <int> E..V..... Constant quantization parameter rate control method (from -1 to INT_MAX) (default -1)
-aq-mode <int> E..V..... AQ method (from -1 to INT_MAX) (default -1)
none E..V.....
variance E..V..... Variance AQ (complexity mask)
autovariance E..V..... Auto-variance AQ
autovariance-biased E..V..... Auto-variance AQ with bias to dark scenes
-aq-strength <float> E..V..... AQ strength. Reduces blocking and blurring in flat and textured areas. (from -1 to FLT_MAX) (default -1)
-psy <boolean> E..V..... Use psychovisual optimizations. (default auto)
-psy-rd <string> E..V..... Strength of psychovisual optimization, in <psy-rd>:<psy-trellis> format.
-rc-lookahead <int> E..V..... Number of frames to look ahead for frametype and ratecontrol (from -1 to INT_MAX) (default -1)
-weightb <boolean> E..V..... Weighted prediction for B-frames. (default auto)
-weightp <int> E..V..... Weighted prediction analysis method. (from -1 to INT_MAX) (default -1)
none E..V.....
simple E..V.....
smart E..V.....
-ssim <boolean> E..V..... Calculate and print SSIM stats. (default auto)
-intra-refresh <boolean> E..V..... Use Periodic Intra Refresh instead of IDR frames. (default auto)
-bluray-compat <boolean> E..V..... Bluray compatibility workarounds. (default auto)
-b-bias <int> E..V..... Influences how often B-frames are used (from INT_MIN to INT_MAX) (default INT_MIN)
-b-pyramid <int> E..V..... Keep some B-frames as references. (from -1 to INT_MAX) (default -1)
none E..V.....
strict E..V..... Strictly hierarchical pyramid
normal E..V..... Non-strict (not Blu-ray compatible)
-mixed-refs <boolean> E..V..... One reference per partition, as opposed to one reference per macroblock (default auto)
-8x8dct <boolean> E..V..... High profile 8x8 transform. (default auto)
-fast-pskip <boolean> E..V..... (default auto)
-aud <boolean> E..V..... Use access unit delimiters. (default auto)
-mbtree <boolean> E..V..... Use macroblock tree ratecontrol. (default auto)
-deblock <string> E..V..... Loop filter parameters, in <alpha:beta> form.
-cplxblur <float> E..V..... Reduce fluctuations in QP (before curve compression) (from -1 to FLT_MAX) (default -1)
-partitions <string> E..V..... A comma-separated list of partitions to consider. Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all
-direct-pred <int> E..V..... Direct MV prediction mode (from -1 to INT_MAX) (default -1)
none E..V.....
spatial E..V.....
temporal E..V.....
auto E..V.....
-slice-max-size <int> E..V..... Limit the size of each slice in bytes (from -1 to INT_MAX) (default -1)
-stats <string> E..V..... Filename for 2 pass stats
-nal-hrd <int> E..V..... Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4) (from -1 to INT_MAX) (default -1)
none E..V.....
vbr E..V.....
cbr E..V.....
-avcintra-class <int> E..V..... AVC-Intra class 50/100/200 (from -1 to 200) (default -1)
-me_method <int> E..V..... Set motion estimation method (from -1 to 4) (default -1)
dia E..V.....
hex E..V.....
umh E..V.....
esa E..V.....
tesa E..V.....
-motion-est <int> E..V..... Set motion estimation method (from -1 to 4) (default -1)
dia E..V.....
hex E..V.....
umh E..V.....
esa E..V.....
tesa E..V.....
-forced-idr <boolean> E..V..... If forcing keyframes, force them as IDR frames. (default false)
-coder <int> E..V..... Coder type (from -1 to 1) (default default)
default E..V.....
cavlc E..V.....
cabac E..V.....
vlc E..V.....
ac E..V.....
-b_strategy <int> E..V..... Strategy to choose between I/P/B-frames (from -1 to 2) (default -1)
-chromaoffset <int> E..V..... QP difference between chroma and luma (from INT_MIN to INT_MAX) (default -1)
-sc_threshold <int> E..V..... Scene change threshold (from INT_MIN to INT_MAX) (default -1)
-noise_reduction <int> E..V..... Noise reduction (from INT_MIN to INT_MAX) (default -1)
-x264-params <string> E..V..... Override the x264 configuration using a :-separated list of key=value parameters
h264_nvenc AVOptions
查看指令
ffmpeg -h encoder=h264_nvenc
ffmpeg version 3.3.8 Copyright (c) 2000-2018 the FFmpeg developers
built with gcc 4.8.5 (GCC) 20150623 (Red Hat 4.8.5-36)
configuration: --prefix=/root/ffmpeg_build --pkg-config-flags=--static --extra-cflags='-I/root/ffmpeg_build/include -I/usr/local/cuda/include' --extra-ldflags='-L/root/ffmpeg_build/lib -L/usr/local/cuda/lib64' --extra-libs=-lpthread --extra-libs=-lm --bindir=/root/bin --enable-gpl --enable-libfdk_aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-nonfree --enable-cuda --enable-cuvid --enable-nvenc --enable-libnpp
libavutil 55. 58.100 / 55. 58.100
libavcodec 57. 89.100 / 57. 89.100
libavformat 57. 71.100 / 57. 71.100
libavdevice 57. 6.100 / 57. 6.100
libavfilter 6. 82.100 / 6. 82.100
libswscale 4. 6.100 / 4. 6.100
libswresample 2. 7.100 / 2. 7.100
libpostproc 54. 5.100 / 54. 5.100
Encoder h264_nvenc [NVIDIA NVENC H.264 encoder]:
General capabilities: delay
Threading capabilities: none
Supported pixel formats: yuv420p nv12 p010le yuv444p yuv444p16le bgr0 rgb0 cuda
h264_nvenc AVOptions:
-preset <int> E..V.... Set the encoding preset (from 0 to 11) (default medium)
default E..V....
slow E..V.... hq 2 passes
medium E..V.... hq 1 pass
fast E..V.... hp 1 pass
hp E..V....
hq E..V....
bd E..V....
ll E..V.... low latency
llhq E..V.... low latency hq
llhp E..V.... low latency hp
lossless E..V....
losslesshp E..V....
-profile <int> E..V.... Set the encoding profile (from 0 to 3) (default main)
baseline E..V....
main E..V....
high E..V....
high444p E..V....
-level <int> E..V.... Set the encoding level restriction (from 0 to 51) (default auto)
auto E..V....
1 E..V....
1.0 E..V....
1b E..V....
1.0b E..V....
1.1 E..V....
1.2 E..V....
1.3 E..V....
2 E..V....
2.0 E..V....
2.1 E..V....
2.2 E..V....
3 E..V....
3.0 E..V....
3.1 E..V....
3.2 E..V....
4 E..V....
4.0 E..V....
4.1 E..V....
4.2 E..V....
5 E..V....
5.0 E..V....
5.1 E..V....
-rc <int> E..V.... Override the preset rate-control (from -1 to INT_MAX) (default -1)
constqp E..V.... Constant QP mode
vbr E..V.... Variable bitrate mode
cbr E..V.... Constant bitrate mode
vbr_minqp E..V.... Variable bitrate mode with MinQP
ll_2pass_quality E..V.... Multi-pass optimized for image quality (only for low-latency presets)
ll_2pass_size E..V.... Multi-pass optimized for constant frame size (only for low-latency presets)
vbr_2pass E..V.... Multi-pass variable bitrate mode
-rc-lookahead <int> E..V.... Number of frames to look ahead for rate-control (from -1 to INT_MAX) (default -1)
-surfaces <int> E..V.... Number of concurrent surfaces (from 0 to 64) (default 32)
-cbr <boolean> E..V.... Use cbr encoding mode (default false)
-2pass <boolean> E..V.... Use 2pass encoding mode (default auto)
-gpu <int> E..V.... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any)
any E..V.... Pick the first device available
list E..V.... List the available devices
-delay <int> E..V.... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX)
-no-scenecut <boolean> E..V.... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false)
-forced-idr <boolean> E..V.... If forcing keyframes, force them as IDR frames. (default false)
-b_adapt <boolean> E..V.... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true)
-spatial-aq <boolean> E..V.... set to 1 to enable Spatial AQ (default false)
-temporal-aq <boolean> E..V.... set to 1 to enable Temporal AQ (default false)
-zerolatency <boolean> E..V.... Set 1 to indicate zero latency operation (no reordering delay) (default false)
-nonref_p <boolean> E..V.... Set this to 1 to enable automatic insertion of non-reference P-frames (default false)
-strict_gop <boolean> E..V.... Set 1 to minimize GOP-to-GOP rate fluctuations (default false)
-aq-strength <int> E..V.... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8)
-cq <int> E..V.... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0)
-aud <boolean> E..V.... Use access unit delimiters (default false)
-bluray-compat <boolean> E..V.... Bluray compatibility workarounds (default false)
-init_qpP <int> E..V.... Initial QP value for P frame (from -1 to 51) (default -1)
-init_qpB <int> E..V.... Initial QP value for B frame (from -1 to 51) (default -1)
-init_qpI <int> E..V.... Initial QP value for I frame (from -1 to 51) (default -1)
-qp <int> E..V.... Constant quantization parameter rate control method (from -1 to 51) (default -1)
x264 encoding options
查看指令
x264 --fullhelp
x264 core:155 r2917 0a84d98
Syntax: x264 [options] -o outfile infile
Infile can be raw (in which case resolution is required),
or YUV4MPEG (*.y4m),
or Avisynth if compiled with support (yes).
or libav* formats if compiled with lavf support (no) or ffms support (no).
Outfile type is selected by filename:
.264 -> Raw bytestream
.mkv -> Matroska
.flv -> Flash Video
.mp4 -> MP4 if compiled with GPAC or L-SMASH support (no)
Output bit depth: 8/10
.
Options:
-h, --help List basic options
--longhelp List more options
--fullhelp List all options
Example usage:
Constant quality mode:
x264 --crf 24 -o <output> <input>
Two-pass with a bitrate of 1000kbps:
x264 --pass 1 --bitrate 1000 -o <output> <input>
x264 --pass 2 --bitrate 1000 -o <output> <input>
Lossless:
x264 --qp 0 -o <output> <input>
Maximum PSNR at the cost of speed and visual quality:
x264 --preset placebo --tune psnr -o <output> <input>
Constant bitrate at 1000kbps with a 2 second-buffer:
x264 --vbv-bufsize 2000 --bitrate 1000 -o <output> <input>
Presets:
--profile <string> Force the limits of an H.264 profile
Overrides all settings.
- baseline:
--no-8x8dct --bframes 0 --no-cabac
--cqm flat --weightp 0
No interlaced.
No lossless.
- main:
--no-8x8dct --cqm flat
No lossless.
- high:
No lossless.
- high10:
No lossless.
Support for bit depth 8-10.
- high422:
No lossless.
Support for bit depth 8-10.
Support for 4:2:0/4:2:2 chroma subsampling.
- high444:
Support for bit depth 8-10.
Support for 4:2:0/4:2:2/4:4:4 chroma subsampling.
--preset <string> Use a preset to select encoding settings [medium]
Overridden by user settings.
- ultrafast:
--no-8x8dct --aq-mode 0 --b-adapt 0
--bframes 0 --no-cabac --no-deblock
--no-mbtree --me dia --no-mixed-refs
--partitions none --rc-lookahead 0 --ref 1
--scenecut 0 --subme 0 --trellis 0
--no-weightb --weightp 0
- superfast:
--no-mbtree --me dia --no-mixed-refs
--partitions i8x8,i4x4 --rc-lookahead 0
--ref 1 --subme 1 --trellis 0 --weightp 1
- veryfast:
--no-mixed-refs --rc-lookahead 10
--ref 1 --subme 2 --trellis 0 --weightp 1
- faster:
--no-mixed-refs --rc-lookahead 20
--ref 2 --subme 4 --weightp 1
- fast:
--rc-lookahead 30 --ref 2 --subme 6
--weightp 1
- medium:
Default settings apply.
- slow:
--direct auto --rc-lookahead 50 --ref 5
--subme 8 --trellis 2
- slower:
--b-adapt 2 --direct auto --me umh
--partitions all --rc-lookahead 60
--ref 8 --subme 9 --trellis 2
- veryslow:
--b-adapt 2 --bframes 8 --direct auto
--me umh --merange 24 --partitions all
--ref 16 --subme 10 --trellis 2
--rc-lookahead 60
- placebo:
--bframes 16 --b-adapt 2 --direct auto
--slow-firstpass --no-fast-pskip
--me tesa --merange 24 --partitions all
--rc-lookahead 60 --ref 16 --subme 11
--trellis 2
--tune <string> Tune the settings for a particular type of source
or situation
Overridden by user settings.
Multiple tunings are separated by commas.
Only one psy tuning can be used at a time.
- film (psy tuning):
--deblock -1:-1 --psy-rd <unset>:0.15
- animation (psy tuning):
--bframes {+2} --deblock 1:1
--psy-rd 0.4:<unset> --aq-strength 0.6
--ref {Double if >1 else 1}
- grain (psy tuning):
--aq-strength 0.5 --no-dct-decimate
--deadzone-inter 6 --deadzone-intra 6
--deblock -2:-2 --ipratio 1.1
--pbratio 1.1 --psy-rd <unset>:0.25
--qcomp 0.8
- stillimage (psy tuning):
--aq-strength 1.2 --deblock -3:-3
--psy-rd 2.0:0.7
- psnr (psy tuning):
--aq-mode 0 --no-psy
- ssim (psy tuning):
--aq-mode 2 --no-psy
- fastdecode:
--no-cabac --no-deblock --no-weightb
--weightp 0
- zerolatency:
--bframes 0 --force-cfr --no-mbtree
--sync-lookahead 0 --sliced-threads
--rc-lookahead 0
--slow-firstpass Don't force these faster settings with --pass 1:
--no-8x8dct --me dia --partitions none
--ref 1 --subme {2 if >2 else unchanged}
--trellis 0 --fast-pskip
Frame-type options:
-I, --keyint <integer or "infinite"> Maximum GOP size [250]
-i, --min-keyint <integer> Minimum GOP size [auto]
--no-scenecut Disable adaptive I-frame decision
--scenecut <integer> How aggressively to insert extra I-frames [40]
--intra-refresh Use Periodic Intra Refresh instead of IDR frames
-b, --bframes <integer> Number of B-frames between I and P [3]
--b-adapt <integer> Adaptive B-frame decision method [1]
Higher values may lower threading efficiency.
- 0: Disabled
- 1: Fast
- 2: Optimal (slow with high --bframes)
--b-bias <integer> Influences how often B-frames are used [0]
--b-pyramid <string> Keep some B-frames as references [normal]
- none: Disabled
- strict: Strictly hierarchical pyramid
- normal: Non-strict (not Blu-ray compatible)
--open-gop Use recovery points to close GOPs
Only available with b-frames
--no-cabac Disable CABAC
-r, --ref <integer> Number of reference frames [3]
--no-deblock Disable loop filter
-f, --deblock <alpha:beta> Loop filter parameters [0:0]
--slices <integer> Number of slices per frame; forces rectangular
slices and is overridden by other slicing options
--slices-max <integer> Absolute maximum slices per frame; overrides
slice-max-size/slice-max-mbs when necessary
--slice-max-size <integer> Limit the size of each slice in bytes
--slice-max-mbs <integer> Limit the size of each slice in macroblocks (max)
--slice-min-mbs <integer> Limit the size of each slice in macroblocks (min)
--tff Enable interlaced mode (top field first)
--bff Enable interlaced mode (bottom field first)
--constrained-intra Enable constrained intra prediction.
--pulldown <string> Use soft pulldown to change frame rate
- none, 22, 32, 64, double, triple, euro (requires cfr input)
--fake-interlaced Flag stream as interlaced but encode progressive.
Makes it possible to encode 25p and 30p Blu-Ray
streams. Ignored in interlaced mode.
--frame-packing <integer> For stereoscopic videos define frame arrangement
- 0: checkerboard - pixels are alternatively from L and R
- 1: column alternation - L and R are interlaced by column
- 2: row alternation - L and R are interlaced by row
- 3: side by side - L is on the left, R on the right
- 4: top bottom - L is on top, R on bottom
- 5: frame alternation - one view per frame
- 6: mono - 2D frame without any frame packing
- 7: tile format - L is on top-left, R split across
Ratecontrol:
-q, --qp <integer> Force constant QP (0-81, 0=lossless)
-B, --bitrate <integer> Set bitrate (kbit/s)
--crf <float> Quality-based VBR (-12-51) [23.0]
--rc-lookahead <integer> Number of frames for frametype lookahead [40]
--vbv-maxrate <integer> Max local bitrate (kbit/s) [0]
--vbv-bufsize <integer> Set size of the VBV buffer (kbit) [0]
--vbv-init <float> Initial VBV buffer occupancy [0.9]
--crf-max <float> With CRF+VBV, limit RF to this value
May cause VBV underflows!
--qpmin <integer> Set min QP [0]
--qpmax <integer> Set max QP [81]
--qpstep <integer> Set max QP step [4]
--ratetol <float> Tolerance of ABR ratecontrol and VBV [1.0]
--ipratio <float> QP factor between I and P [1.40]
--pbratio <float> QP factor between P and B [1.30]
--chroma-qp-offset <integer> QP difference between chroma and luma [0]
--aq-mode <integer> AQ method [1]
- 0: Disabled
- 1: Variance AQ (complexity mask)
- 2: Auto-variance AQ
- 3: Auto-variance AQ with bias to dark scenes
--aq-strength <float> Reduces blocking and blurring in flat and
textured areas. [1.0]
-p, --pass <integer> Enable multipass ratecontrol
- 1: First pass, creates stats file
- 2: Last pass, does not overwrite stats file
- 3: Nth pass, overwrites stats file
--stats <string> Filename for 2 pass stats ["x264_2pass.log"]
--no-mbtree Disable mb-tree ratecontrol.
--qcomp <float> QP curve compression [0.60]
--cplxblur <float> Reduce fluctuations in QP (before curve compression) [20.0]
--qblur <float> Reduce fluctuations in QP (after curve compression) [0.5]
--zones <zone0>/<zone1>/... Tweak the bitrate of regions of the video
Each zone is of the form
<start frame>,<end frame>,<option>
where <option> is either
q=<integer> (force QP)
or b=<float> (bitrate multiplier)
--qpfile <string> Force frametypes and QPs for some or all frames
Format of each line: framenumber frametype QP
QP is optional (none lets x264 choose). Frametypes: I,i,K,P,B,b.
K=<I or i> depending on open-gop setting
QPs are restricted by qpmin/qpmax.
Analysis:
-A, --partitions <string> Partitions to consider ["p8x8,b8x8,i8x8,i4x4"]
- p8x8, p4x4, b8x8, i8x8, i4x4
- none, all
(p4x4 requires p8x8. i8x8 requires --8x8dct.)
--direct <string> Direct MV prediction mode ["spatial"]
- none, spatial, temporal, auto
--no-weightb Disable weighted prediction for B-frames
--weightp <integer> Weighted prediction for P-frames [2]
- 0: Disabled
- 1: Weighted refs
- 2: Weighted refs + Duplicates
--me <string> Integer pixel motion estimation method ["hex"]
- dia: diamond search, radius 1 (fast)
- hex: hexagonal search, radius 2
- umh: uneven multi-hexagon search
- esa: exhaustive search
- tesa: hadamard exhaustive search (slow)
--merange <integer> Maximum motion vector search range [16]
--mvrange <integer> Maximum motion vector length [-1 (auto)]
--mvrange-thread <int> Minimum buffer between threads [-1 (auto)]
-m, --subme <integer> Subpixel motion estimation and mode decision [7]
- 0: fullpel only (not recommended)
- 1: SAD mode decision, one qpel iteration
- 2: SATD mode decision
- 3-5: Progressively more qpel
- 6: RD mode decision for I/P-frames
- 7: RD mode decision for all frames
- 8: RD refinement for I/P-frames
- 9: RD refinement for all frames
- 10: QP-RD - requires trellis=2, aq-mode>0
- 11: Full RD: disable all early terminations
--psy-rd <float:float> Strength of psychovisual optimization ["1.0:0.0"]
#1: RD (requires subme>=6)
#2: Trellis (requires trellis, experimental)
--no-psy Disable all visual optimizations that worsen
both PSNR and SSIM.
--no-mixed-refs Don't decide references on a per partition basis
--no-chroma-me Ignore chroma in motion estimation
--no-8x8dct Disable adaptive spatial transform size
-t, --trellis <integer> Trellis RD quantization. [1]
- 0: disabled
- 1: enabled only on the final encode of a MB
- 2: enabled on all mode decisions
--no-fast-pskip Disables early SKIP detection on P-frames
--no-dct-decimate Disables coefficient thresholding on P-frames
--nr <integer> Noise reduction [0]
--deadzone-inter <int> Set the size of the inter luma quantization deadzone [21]
--deadzone-intra <int> Set the size of the intra luma quantization deadzone [11]
Deadzones should be in the range 0 - 32.
--cqm <string> Preset quant matrices ["flat"]
- jvt, flat
--cqmfile <string> Read custom quant matrices from a JM-compatible file
Overrides any other --cqm* options.
--cqm4 <list> Set all 4x4 quant matrices
Takes a comma-separated list of 16 integers.
--cqm8 <list> Set all 8x8 quant matrices
Takes a comma-separated list of 64 integers.
--cqm4i, --cqm4p, --cqm8i, --cqm8p <list>
Set both luma and chroma quant matrices
--cqm4iy, --cqm4ic, --cqm4py, --cqm4pc <list>
Set individual quant matrices
Video Usability Info (Annex E):
The VUI settings are not used by the encoder but are merely suggestions to
the playback equipment. See doc/vui.txt for details. Use at your own risk.
--overscan <string> Specify crop overscan setting ["undef"]
- undef, show, crop
--videoformat <string> Specify video format ["undef"]
- component, pal, ntsc, secam, mac, undef
--range <string> Specify color range ["auto"]
- auto, tv, pc
--colorprim <string> Specify color primaries ["undef"]
- undef, bt709, bt470m, bt470bg, smpte170m,
smpte240m, film, bt2020, smpte428,
smpte431, smpte432
--transfer <string> Specify transfer characteristics ["undef"]
- undef, bt709, bt470m, bt470bg, smpte170m,
smpte240m, linear, log100, log316,
iec61966-2-4, bt1361e, iec61966-2-1,
bt2020-10, bt2020-12, smpte2084, smpte428,
arib-std-b67
--colormatrix <string> Specify color matrix setting ["???"]
- undef, bt709, fcc, bt470bg, smpte170m,
smpte240m, GBR, YCgCo, bt2020nc, bt2020c,
smpte2085, chroma-derived-nc,
chroma-derived-c, ICtCp
--chromaloc <integer> Specify chroma sample location (0 to 5) [0]
--alternative-transfer <string> Specify an alternative transfer
characteristics ["undef"]
- same values as --transfer
--nal-hrd <string> Signal HRD information (requires vbv-bufsize)
- none, vbr, cbr (cbr not allowed in .mp4)
--filler Force hard-CBR and generate filler (implied by
--nal-hrd cbr)
--pic-struct Force pic_struct in Picture Timing SEI
--crop-rect <string> Add 'left,top,right,bottom' to the bitstream-level
cropping rectangle
Input/Output:
-o, --output <string> Specify output file
--muxer <string> Specify output container format ["auto"]
- auto, raw, mkv, flv
--demuxer <string> Specify input container format ["auto"]
- auto, raw, y4m, avs
--input-fmt <string> Specify input file format (requires lavf support)
--input-csp <string> Specify input colorspace format for raw input
- valid csps for `raw' demuxer:
i420, yv12, nv12, nv21, i422, yv16, nv16, yuyv,
uyvy, i444, yv24, bgr, bgra, rgb
--output-csp <string> Specify output colorspace ["i420"]
- i420, i422, i444, rgb
--input-depth <integer> Specify input bit depth for raw input
--output-depth <integer> Specify output bit depth
--input-range <string> Specify input color range ["auto"]
- auto, tv, pc
--input-res <intxint> Specify input resolution (width x height)
--index <string> Filename for input index file
--sar width:height Specify Sample Aspect Ratio
--fps <float|rational> Specify framerate
--seek <integer> First frame to encode
--frames <integer> Maximum number of frames to encode
--level <string> Specify level (as defined by Annex A)
--bluray-compat Enable compatibility hacks for Blu-ray support
--avcintra-class <integer> Use compatibility hacks for AVC-Intra class
- 50, 100, 200
--stitchable Don't optimize headers based on video content
Ensures ability to recombine a segmented encode
-v, --verbose Print stats for each frame
--no-progress Don't show the progress indicator while encoding
--quiet Quiet Mode
--log-level <string> Specify the maximum level of logging ["info"]
- none, error, warning, info, debug
--psnr Enable PSNR computation
--ssim Enable SSIM computation
--threads <integer> Force a specific number of threads
--lookahead-threads <integer> Force a specific number of lookahead threads
--sliced-threads Low-latency but lower-efficiency threading
--thread-input Run Avisynth in its own thread
--sync-lookahead <integer> Number of buffer frames for threaded lookahead
--non-deterministic Slightly improve quality of SMP, at the cost of repeatability
--cpu-independent Ensure exact reproducibility across different cpus,
as opposed to letting them select different algorithms
--asm <integer> Override CPU detection
--no-asm Disable all CPU optimizations
--opencl Enable use of OpenCL
--opencl-clbin <string> Specify path of compiled OpenCL kernel cache
--opencl-device <integer> Specify OpenCL device ordinal
--dump-yuv <string> Save reconstructed frames
--sps-id <integer> Set SPS and PPS id numbers [0]
--aud Use access unit delimiters
--force-cfr Force constant framerate timestamp generation
--tcfile-in <string> Force timestamp generation with timecode file
--tcfile-out <string> Output timecode v2 file from input timestamps
--timebase <int/int> Specify timebase numerator and denominator
<integer> Specify timebase numerator for input timecode file
or specify timebase denominator for other input
--dts-compress Eliminate initial delay with container DTS hack
Filtering:
--vf, --video-filter <filter0>/<filter1>/... Apply video filtering to the input file
Filter options may be specified in <filter>:<option>=<value> format.
Available filters:
crop:left,top,right,bottom
removes pixels from the edges of the frame
select_every:step,offset1[,...]
apply a selection pattern to input frames
step: the number of frames in the pattern
offsets: the offset into the step to select a frame
see: http://avisynth.nl/index.php/Select#SelectEvery
1496
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
