linux下串口编程代码

1. [代码][C/C++]代码     跳至 [1] [全屏预览]

?

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104

#include <time.h> #include <fcntl.h> #include <stdio.h> #include <ctype.h> #include <errno.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <signal.h> #include <termio.h> #include <syslog.h> #include <pthread.h> #include <sys/ipc.h> #include <sys/msg.h> #include <sys/wait.h> #include <sys/stat.h> #include <sys/time.h> #include <semaphore.h> #include <arpa/inet.h> #include <sys/types.h> #include <sys/socket.h> #include <bits/signum.h> #include <sys/resource.h>   int uart_init( int arg, int baud) {      int fd;      char port[20];      struct termios Opt;      int uartbiit[50]= {B115200,B9600,B19200,B4800,B2400,B1200};        sprintf (port, "/dev/s3c2410_serial%d" ,arg);        printf ( "Use port: %s \n" , port);      fd = open(port, O_RDWR);     //打开串口      if (fd<0)      {          return -1;                 //没有打开返回      }        tcgetattr(fd,&Opt);      //初始化      tcflush(fd,TCIFLUSH);      cfsetispeed(&Opt,uartbiit[baud]);    //设置波特率      cfsetospeed(&Opt,uartbiit[baud]);        Opt.c_cflag |= CS8;                          //设置数据位      Opt.c_cflag &= ~PARENB;      Opt.c_oflag &= ~(OPOST);      Opt.c_cflag &= ~CSTOPB;      Opt.c_lflag &= ~(ICANON|ISIG|ECHO|IEXTEN);      Opt.c_iflag &= ~(INPCK|BRKINT|ICRNL|ISTRIP|IXON);        Opt.c_cc[VMIN] = 64;            //最大长度      Opt.c_cc[VTIME] = 1;            //超时时间        if (tcsetattr(fd,TCSANOW,&Opt) != 0)       //装载初始化参数      {          perror ( "SetupSerial!\n" );          close(fd);          return -1;      }      return (fd);   }   int main() {      int fd, len = 0, i=0;      char buf[300];        if ((fd = uart_init(1, 0)) <0)   //打开串口，波特率为115200；      {          printf ( "Open uart err \n" );          return -1;      }      sprintf (buf, "Hello world !\n" );   //输出内容       while (1)            {      memset (buf, 0 , sizeof (buf));       #if 0                     while ((len = read(fd,buf,64))>0)                     {                          printf ( "%s\n" ,buf);                      } #endif     #if 1      int nread;      while ((nread = read(fd, buf, 300))>0)      { //      printf("read len %d\t",nread); //      buf[nread] = '\0';          printf ( "%s\n" ,buf);          write(fd,buf, sizeof (buf));            } #endif            }            return 0; }