file_operations结构体介绍

内核中file_operations源码 linux-2.6.22.6

/include/linux/fs.h 具体内容在最后

//code from : linux2.6.22.6
/*
 * NOTE:
 * read, write, poll, fsync, readv, writev, unlocked_ioctl and compat_ioctl
 * can be called without the big kernel lock held in all filesystems.
 */
struct file_operations {
	struct module *owner;
	loff_t (*llseek) (struct file *, loff_t, int);
	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
	ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
	ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
	int (*readdir) (struct file *, void *, filldir_t);
	unsigned int (*poll) (struct file *, struct poll_table_struct *);
	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
	int (*mmap) (struct file *, struct vm_area_struct *);
	int (*open) (struct inode *, struct file *);
	int (*flush) (struct file *, fl_owner_t id);
	int (*release) (struct inode *, struct file *);
	int (*fsync) (struct file *, struct dentry *, int datasync);
	int (*aio_fsync) (struct kiocb *, int datasync);
	int (*fasync) (int, struct file *, int);
	int (*lock) (struct file *, int, struct file_lock *);
	ssize_t (*sendfile) (struct file *, loff_t *, size_t, read_actor_t, void *);
	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
	unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
	int (*check_flags)(int);
	int (*dir_notify)(struct file *filp, unsigned long arg);
	int (*flock) (struct file *, int, struct file_lock *);
	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
	ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
};

1.struct module *owner

第一个file_operations 成员根本不是一个操作;它是一个指向拥有这个结构的模块的指针.这

个成员用来在它的操作还在被使用时阻止模块被卸载.几乎所有时间中,它被简单初始化为

THIS_MODULE, 一个在<linux/module.h> 中定义的宏.

struct module {
	struct module *next;
	const char *name;
	int gpl_compatible;
	struct symbol *unres;
	int seen;
	int skip;
	int has_init;
	int has_cleanup;
	struct buffer dev_table_buf;
	char	     srcversion[25];
};

struct module *owner

                                 struct symbol

struct symbol {
	struct symbol *hash_next;
	const char *name;
	enum symbol_type type;
	struct string_list *defn;
	struct symbol *expansion_trail;
	struct symbol *visited;
	int is_extern;
};

instance analysis1:

#include <linux/module.h>
 
MODULE_LICENSE("Dual BSD/GPL");
 
static int hello_init(void)
{
    unsigned int cpu = get_cpu();
    struct module *mod;
 
    printk(KERN_ALERT "this module: %p==%p/n", &__this_module, THIS_MODULE );
    printk(KERN_ALERT "module state: %d/n", THIS_MODULE->state );
    printk(KERN_ALERT "module name: %s/n", THIS_MODULE->name );
    list_for_each_entry(mod, *(&THIS_MODULE->list.prev), list )
    printk(KERN_ALERT "module name: %s/n", mod->name );
    return 0;
}
 
static void hello_exit(void)
{
    printk(KERN_ALERT "module state: %d/n", THIS_MODULE->state );
}
 
module_init(hello_init);
module_exit(hello_exit);

 有兴趣的同学可以练练手看看

2.loff_t (*llseek) (struct file *, loff_t, int);

llseek 方法用作改变文件中的当前读/写位置,并且新位置作为(正的)返回值.loff_t 参数是一

个"longoffset", 并且就算在32位平台上也至少64 位宽.错误由一个负返回值指示.如果这个

函数指针是NULL, seek 调用会以潜在地无法预知的方式修改file 结构中的位置计数器.

3.ssize_t (*read) (struct file *, char __user *, size_t, loff_t*);

用来从设备中获取数据.在这个位置的一个空指针导致read 系统调用以-EINVAL("Invalid

argument") 失败.一个非负返回值代表了成功读取的字节数(返回值是一个"signed size" 类型,

常常是目标平台本地的整数类型).

4.ssize_t (*aio_read)(struct kiocb *, char __user *, size_t,loff_t);

初始化一个异步读-- 可能在函数返回前不结束的读操作.如果这个方法是NULL, 所有的操

作会由read 代替进行(同步地).

5.ssize_t (*write) (struct file *, const char __user *, size_t,loff_t *);

发送数据给设备.如果NULL, -EINVAL 返回给调用write 系统调用的程序.如果非负,返回值

代表成功写的字节数.

6.ssize_t (*aio_write)(struct kiocb *, const char __user *,size_t, loff_t *);

初始化设备上的一个异步写.

7.int (*readdir) (struct file *, void *, filldir_t);

对于设备文件这个成员应当为NULL; 它用来读取目录,并且仅对文件系统有用.

8.unsigned int (*poll) (struct file *, struct poll_table_struct*);

poll 方法是3 个系统调用的后端:poll, epoll, 和select, 都用作查询对一个或多个文件描述符的

读或写是否会阻塞.poll 方法应当返回一个位掩码指示是否非阻塞的读或写是可能的,并且,

可能地,提供给内核信息用来使调用进程睡眠直到I/O 变为可能.如果一个驱动的poll 方法

为NULL, 设备假定为不阻塞地可读可写.

9.int (*ioctl) (struct inode *, struct file *, unsigned int,unsigned long);

ioctl 系统调用提供了发出设备特定命令的方法(例如格式化软盘的一个磁道,这不是读也不

是写).另外,几个ioctl 命令被内核识别而不必引用fops 表.如果设备不提供ioctl 方法,对于

任何未事先定义的请求(-ENOTTY,"设备无这样的ioctl"), 系统调用返回一个错误.

10.int (*mmap) (struct file *, struct vm_area_struct *);

mmap 用来请求将设备内存映射到进程的地址空间.如果这个方法是NULL, mmap 系统调用

返回-ENODEV.

11.int (*open) (struct inode *, struct file *);

尽管这常常是对设备文件进行的第一个操作,不要求驱动声明一个对应的方法.如果这个项

是NULL, 设备打开一直成功,但是你的驱动不会得到通知.

12.int (*flush) (struct file *);

flush 操作在进程关闭它的设备文件描述符的拷贝时调用;它应当执行(并且等待)设备的任何

未完成的操作.这个必须不要和用户查询请求的fsync 操作混淆了.当前,flush 在很少驱动中

使用;SCSI 磁带驱动使用它,例如,为确保所有写的数据在设备关闭前写到磁带上.如果flush

为NULL, 内核简单地忽略用户应用程序的请求.

13.int (*release) (struct inode *, struct file *);

在文件结构被释放时引用这个操作.如同open, release 可以为NULL.

14.int (*fsync) (struct file *, struct dentry *, int);

这个方法是fsync 系统调用的后端,用户调用来刷新任何挂着的数据.如果这个指针是

NULL, 系统调用返回-EINVAL.

15.int (*aio_fsync)(struct kiocb *, int);

这是fsync 方法的异步版本.

16.int (*fasync) (int, struct file *, int);

这个操作用来通知设备它的FASYNC 标志的改变.异步通知是一个高级的主题,在第6 章中

描述.这个成员可以是NULL如果驱动不支持异步通知.

17.int (*lock) (struct file *, int, struct file_lock *);

lock 方法用来实现文件加锁;加锁对常规文件是必不可少的特性,但是设备驱动几乎从不实

现它.

18.ssize_t (*readv) (struct file *, const struct iovec *, unsignedlong, loff_t *);

19.ssize_t (*writev) (struct file *, const struct iovec *,unsigned long, loff_t *);

这些方法实现发散/汇聚读和写操作.应用程序偶尔需要做一个包含多个内存区的单个读或

写操作;这些系统调用允许它们这样做而不必对数据进行额外拷贝.如果这些函数指针为

NULL, read 和write 方法被调用(可能多于一次).

20.ssize_t (*sendfile)(struct file *, loff_t *, size_t,read_actor_t, void *);

这个方法实现sendfile 系统调用的读,使用最少的拷贝从一个文件描述符搬移数据到另一个.

例如,它被一个需要发送文件内容到一个网络连接的web 服务器使用.设备驱动常常使

sendfile 为NULL.

21.ssize_t (*sendpage) (struct file *, struct page *, int, size_t,loff_t *, int);

sendpage 是sendfile 的另一半;它由内核调用来发送数据,一次一页,到对应的文件.设备驱动

实际上不实现sendpage.

22.unsigned long (*get_unmapped_area)(struct file *, unsignedlong, unsigned long, unsigned long, unsigned long);

这个方法的目的是在进程的地址空间找一个合适的位置来映射在底层设备上的内存段中.

这个任务通常由内存管理代码进行;这个方法存在为了使驱动能强制特殊设备可能有的任

何的对齐请求.大部分驱动可以置这个方法为NULL.

23.int (*check_flags)(int)

这个方法允许模块检查传递给fnctl(F_SETFL...) 调用的标志.

24.int (*dir_notify)(struct file *, unsigned long);

这个方法在应用程序使用fcntl 来请求目录改变通知时调用.只对文件系统有用;驱动不需要

/include/linux/fs.h +1791 file_operation 头文件内容

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_FS_H
#define _LINUX_FS_H

#include <linux/linkage.h>
#include <linux/wait_bit.h>
#include <linux/kdev_t.h>
#include <linux/dcache.h>
#include <linux/path.h>
#include <linux/stat.h>
#include <linux/cache.h>
#include <linux/list.h>
#include <linux/list_lru.h>
#include <linux/llist.h>
#include <linux/radix-tree.h>
#include <linux/xarray.h>
#include <linux/rbtree.h>
#include <linux/init.h>
#include <linux/pid.h>
#include <linux/bug.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
#include <linux/mm_types.h>
#include <linux/capability.h>
#include <linux/semaphore.h>
#include <linux/fcntl.h>
#include <linux/fiemap.h>
#include <linux/rculist_bl.h>
#include <linux/atomic.h>
#include <linux/shrinker.h>
#include <linux/migrate_mode.h>
#include <linux/uidgid.h>
#include <linux/lockdep.h>
#include <linux/percpu-rwsem.h>
#include <linux/workqueue.h>
#include <linux/delayed_call.h>
#include <linux/uuid.h>
#include <linux/errseq.h>
#include <linux/ioprio.h>
#include <linux/fs_types.h>
#include <linux/build_bug.h>
#include <linux/stddef.h>

#include <asm/byteorder.h>
#include <uapi/linux/fs.h>

struct backing_dev_info;
struct bdi_writeback;
struct bio;
struct export_operations;
struct hd_geometry;
struct iovec;
struct kiocb;
struct kobject;
struct pipe_inode_info;
struct poll_table_struct;
struct kstatfs;
struct vm_area_struct;
struct vfsmount;
struct cred;
struct swap_info_struct;
struct seq_file;
struct workqueue_struct;
struct iov_iter;
struct fscrypt_info;
struct fscrypt_operations;
struct fs_context;
struct fs_parameter_description;

extern void __init inode_init(void);
extern void __init inode_init_early(void);
extern void __init files_init(void);
extern void __init files_maxfiles_init(void);

extern struct files_stat_struct files_stat;
extern unsigned long get_max_files(void);
extern unsigned int sysctl_nr_open;
extern struct inodes_stat_t inodes_stat;
extern int leases_enable, lease_break_time;
extern int sysctl_protected_symlinks;
extern int sysctl_protected_hardlinks;
extern int sysctl_protected_fifos;
extern int sysctl_protected_regular;

typedef __kernel_rwf_t rwf_t;

struct buffer_head;
typedef int (get_block_t)(struct inode *inode, sector_t iblock,
			struct buffer_head *bh_result, int create);
typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
			ssize_t bytes, void *private);

#define MAY_EXEC		0x00000001
#define MAY_WRITE		0x00000002
#define MAY_READ		0x00000004
#define MAY_APPEND		0x00000008
#define MAY_ACCESS		0x00000010
#define MAY_OPEN		0x00000020
#define MAY_CHDIR		0x00000040
/* called from RCU mode, don't block */
#define MAY_NOT_BLOCK		0x00000080

/*
 * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
 * to O_WRONLY and O_RDWR via the strange trick in do_dentry_open()
 */

/* file is open for reading */
#define FMODE_READ		((__force fmode_t)0x1)
/* file is open for writing */
#define FMODE_WRITE		((__force fmode_t)0x2)
/* file is seekable */
#define FMODE_LSEEK		((__force fmode_t)0x4)
/* file can be accessed using pread */
#define FMODE_PREAD		((__force fmode_t)0x8)
/* file can be accessed using pwrite */
#define FMODE_PWRITE		((__force fmode_t)0x10)
/* File is opened for execution with sys_execve / sys_uselib */
#define FMODE_EXEC		((__force fmode_t)0x20)
/* File is opened with O_NDELAY (only set for block devices) */
#define FMODE_NDELAY		((__force fmode_t)0x40)
/* File is opened with O_EXCL (only set for block devices) */
#define FMODE_EXCL		((__force fmode_t)0x80)
/* File is opened using open(.., 3, ..) and is writeable only for ioctls
   (specialy hack for floppy.c) */
#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
/* 32bit hashes as llseek() offset (for directories) */
#define FMODE_32BITHASH         ((__force fmode_t)0x200)
/* 64bit hashes as llseek() offset (for directories) */
#define FMODE_64BITHASH         ((__force fmode_t)0x400)

/*
 * Don't update ctime and mtime.
 *
 * Currently a special hack for the XFS open_by_handle ioctl, but we'll
 * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
 */
#define FMODE_NOCMTIME		((__force fmode_t)0x800)

/* Expect random access pattern */
#define FMODE_RANDOM		((__force fmode_t)0x1000)

/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)

/* File is opened with O_PATH; almost nothing can be done with it */
#define FMODE_PATH		((__force fmode_t)0x4000)

/* File needs atomic accesses to f_pos */
#define FMODE_ATOMIC_POS	((__force fmode_t)0x8000)
/* Write access to underlying fs */
#define FMODE_WRITER		((__force fmode_t)0x10000)
/* Has read method(s) */
#define FMODE_CAN_READ          ((__force fmode_t)0x20000)
/* Has write method(s) */
#define FMODE_CAN_WRITE         ((__force fmode_t)0x40000)

#define FMODE_OPENED		((__force fmode_t)0x80000)
#define FMODE_CREATED		((__force fmode_t)0x100000)

/* File is stream-like */
#define FMODE_STREAM		((__force fmode_t)0x200000)

/* File was opened by fanotify and shouldn't generate fanotify events */
#define FMODE_NONOTIFY		((__force fmode_t)0x4000000)

/* File is capable of returning -EAGAIN if I/O will block */
#define FMODE_NOWAIT		((__force fmode_t)0x8000000)

/* File represents mount that needs unmounting */
#define FMODE_NEED_UNMOUNT	((__force fmode_t)0x10000000)

/* File does not contribute to nr_files count */
#define FMODE_NOACCOUNT		((__force fmode_t)0x20000000)

/*
 * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
 * that indicates that they should check the contents of the iovec are
 * valid, but not check the memory that the iovec elements
 * points too.
 */
#define CHECK_IOVEC_ONLY -1

/*
 * Attribute flags.  These should be or-ed together to figure out what
 * has been changed!
 */
#define ATTR_MODE	(1 << 0)
#define ATTR_UID	(1 << 1)
#define ATTR_GID	(1 << 2)
#define ATTR_SIZE	(1 << 3)
#define ATTR_ATIME	(1 << 4)
#define ATTR_MTIME	(1 << 5)
#define ATTR_CTIME	(1 << 6)
#define ATTR_ATIME_SET	(1 << 7)
#define ATTR_MTIME_SET	(1 << 8)
#define ATTR_FORCE	(1 << 9) /* Not a change, but a change it */
#define ATTR_KILL_SUID	(1 << 11)
#define ATTR_KILL_SGID	(1 << 12)
#define ATTR_FILE	(1 << 13)
#define ATTR_KILL_PRIV	(1 << 14)
#define ATTR_OPEN	(1 << 15) /* Truncating from open(O_TRUNC) */
#define ATTR_TIMES_SET	(1 << 16)
#define ATTR_TOUCH	(1 << 17)

/*
 * Whiteout is represented by a char device.  The following constants define the
 * mode and device number to use.
 */
#define WHITEOUT_MODE 0
#define WHITEOUT_DEV 0

/*
 * This is the Inode Attributes structure, used for notify_change().  It
 * uses the above definitions as flags, to know which values have changed.
 * Also, in this manner, a Filesystem can look at only the values it cares
 * about.  Basically, these are the attributes that the VFS layer can
 * request to change from the FS layer.
 *
 * Derek Atkins <warlord@MIT.EDU> 94-10-20
 */
struct iattr {
	unsigned int	ia_valid;
	umode_t		ia_mode;
	kuid_t		ia_uid;
	kgid_t		ia_gid;
	loff_t		ia_size;
	struct timespec64 ia_atime;
	struct timespec64 ia_mtime;
	struct timespec64 ia_ctime;

	/*
	 * Not an attribute, but an auxiliary info for filesystems wanting to
	 * implement an ftruncate() like method.  NOTE: filesystem should
	 * check for (ia_valid & ATTR_FILE), and not for (ia_file != NULL).
	 */
	struct file	*ia_file;
};

/*
 * Includes for diskquotas.
 */
#include <linux/quota.h>

/*
 * Maximum number of layers of fs stack.  Needs to be limited to
 * prevent kernel stack overflow
 */
#define FILESYSTEM_MAX_STACK_DEPTH 2

/** 
 * enum positive_aop_returns - aop return codes with specific semantics
 *
 * @AOP_WRITEPAGE_ACTIVATE: Informs the caller that page writeback has
 * 			    completed, that the page is still locked, and
 * 			    should be considered active.  The VM uses this hint
 * 			    to return the page to the active list -- it won't
 * 			    be a candidate for writeback again in the near
 * 			    future.  Other callers must be careful to unlock
 * 			    the page if they get this return.  Returned by
 * 			    writepage(); 
 *
 * @AOP_TRUNCATED_PAGE: The AOP method that was handed a locked page has
 *  			unlocked it and the page might have been truncated.
 *  			The caller should back up to acquiring a new page and
 *  			trying again.  The aop will be taking reasonable
 *  			precautions not to livelock.  If the caller held a page
 *  			reference, it should drop it before retrying.  Returned
 *  			by readpage().
 *
 * address_space_operation functions return these large constants to indicate
 * special semantics to the caller.  These are much larger than the bytes in a
 * page to allow for functions that return the number of bytes operated on in a
 * given page.
 */

enum positive_aop_returns {
	AOP_WRITEPAGE_ACTIVATE	= 0x80000,
	AOP_TRUNCATED_PAGE	= 0x80001,
};

#define AOP_FLAG_CONT_EXPAND		0x0001 /* called from cont_expand */
#define AOP_FLAG_NOFS			0x0002 /* used by filesystem to direct
						* helper code (eg buffer layer)
						* to clear GFP_FS from alloc */

/*
 * oh the beauties of C type declarations.
 */
struct page;
struct address_space;
struct writeback_control;

/*
 * Write life time hint values.
 * Stored in struct inode as u8.
 */
enum rw_hint {
	WRITE_LIFE_NOT_SET	= 0,
	WRITE_LIFE_NONE		= RWH_WRITE_LIFE_NONE,
	WRITE_LIFE_SHORT	= RWH_WRITE_LIFE_SHORT,
	WRITE_LIFE_MEDIUM	= RWH_WRITE_LIFE_MEDIUM,
	WRITE_LIFE_LONG		= RWH_WRITE_LIFE_LONG,
	WRITE_LIFE_EXTREME	= RWH_WRITE_LIFE_EXTREME,
};

#define IOCB_EVENTFD		(1 << 0)
#define IOCB_APPEND		(1 << 1)
#define IOCB_DIRECT		(1 << 2)
#define IOCB_HIPRI		(1 << 3)
#define IOCB_DSYNC		(1 << 4)
#define IOCB_SYNC		(1 << 5)
#define IOCB_WRITE		(1 << 6)
#define IOCB_NOWAIT		(1 << 7)

struct kiocb {
	struct file		*ki_filp;

	/* The 'ki_filp' pointer is shared in a union for aio */
	randomized_struct_fields_start

	loff_t			ki_pos;
	void (*ki_complete)(struct kiocb *iocb, long ret, long ret2);
	void			*private;
	int			ki_flags;
	u16			ki_hint;
	u16			ki_ioprio; /* See linux/ioprio.h */
	unsigned int		ki_cookie; /* for ->iopoll */

	randomized_struct_fields_end
};

static inline bool is_sync_kiocb(struct kiocb *kiocb)
{
	return kiocb->ki_complete == NULL;
}

/*
 * "descriptor" for what we're up to with a read.
 * This allows us to use the same read code yet
 * have multiple different users of the data that
 * we read from a file.
 *
 * The simplest case just copies the data to user
 * mode.
 */
typedef struct {
	size_t written;
	size_t count;
	union {
		char __user *buf;
		void *data;
	} arg;
	int error;
} read_descriptor_t;

typedef int (*read_actor_t)(read_descriptor_t *, struct page *,
		unsigned long, unsigned long);

struct address_space_operations {
	int (*writepage)(struct page *page, struct writeback_control *wbc);
	int (*readpage)(struct file *, struct page *);

	/* Write back some dirty pages from this mapping. */
	int (*writepages)(struct address_space *, struct writeback_control *);

	/* Set a page dirty.  Return true if this dirtied it */
	int (*set_page_dirty)(struct page *page);

	/*
	 * Reads in the requested pages. Unlike ->readpage(), this is
	 * PURELY used for read-ahead!.
	 */
	int (*readpages)(struct file *filp, struct address_space *mapping,
			struct list_head *pages, unsigned nr_pages);

	int (*write_begin)(struct file *, struct address_space *mapping,
				loff_t pos, unsigned len, unsigned flags,
				struct page **pagep, void **fsdata);
	int (*write_end)(struct file *, struct address_space *mapping,
				loff_t pos, unsigned len, unsigned copied,
				struct page *page, void *fsdata);

	/* Unfortunately this kludge is needed for FIBMAP. Don't use it */
	sector_t (*bmap)(struct address_space *, sector_t);
	void (*invalidatepage) (struct page *, unsigned int, unsigned int);
	int (*releasepage) (struct page *, gfp_t);
	void (*freepage)(struct page *);
	ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter);
	/*
	 * migrate the contents of a page to the specified target. If
	 * migrate_mode is MIGRATE_ASYNC, it must not block.
	 */
	int (*migratepage) (struct address_space *,
			struct page *, struct page *, enum migrate_mode);
	bool (*isolate_page)(struct page *, isolate_mode_t);
	void (*putback_page)(struct page *);
	int (*launder_page) (struct page *);
	int (*is_partially_uptodate) (struct page *, unsigned long,
					unsigned long);
	void (*is_dirty_writeback) (struct page *, bool *, bool *);
	int (*error_remove_page)(struct address_space *, struct page *);

	/* swapfile support */
	int (*swap_activate)(struct swap_info_struct *sis, struct file *file,
				sector_t *span);
	void (*swap_deactivate)(struct file *file);
};

extern const struct address_space_operations empty_aops;

/*
 * pagecache_write_begin/pagecache_write_end must be used by general code
 * to write into the pagecache.
 */
int pagecache_write_begin(struct file *, struct address_space *mapping,
				loff_t pos, unsigned len, unsigned flags,
				struct page **pagep, void **fsdata);

int pagecache_write_end(struct file *, struct address_space *mapping,
				loff_t pos, unsigned len, unsigned copied,
				struct page *page, void *fsdata);

/**
 * struct address_space - Contents of a cacheable, mappable object.
 * @host: Owner, either the inode or the block_device.
 * @i_pages: Cached pages.
 * @gfp_mask: Memory allocation flags to use for allocating pages.
 * @i_mmap_writable: Number of VM_SHARED mappings.
 * @i_mmap: Tree of private and shared mappings.
 * @i_mmap_rwsem: Protects @i_mmap and @i_mmap_writable.
 * @nrpages: Number of page entries, protected by the i_pages lock.
 * @nrexceptional: Shadow or DAX entries, protected by the i_pages lock.
 * @writeback_index: Writeback starts here.
 * @a_ops: Methods.
 * @flags: Error bits and flags (AS_*).
 * @wb_err: The most recent error which has occurred.
 * @private_lock: For use by the owner of the address_space.
 * @private_list: For use by the owner of the address_space.
 * @private_data: For use by the owner of the address_space.
 */
struct address_space {
	struct inode		*host;
	struct xarray		i_pages;
	gfp_t			gfp_mask;
	atomic_t		i_mmap_writable;
	struct rb_root_cached	i_mmap;
	struct rw_semaphore	i_mmap_rwsem;
	unsigned long		nrpages;
	unsigned long		nrexceptional;
	pgoff_t			writeback_index;
	const struct address_space_operations *a_ops;
	unsigned long		flags;
	errseq_t		wb_err;
	spinlock_t		private_lock;
	struct list_head	private_list;
	void			*private_data;
} __attribute__((aligned(sizeof(long)))) __randomize_layout;
	/*
	 * On most architectures that alignment is already the case; but
	 * must be enforced here for CRIS, to let the least significant bit
	 * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON.
	 */
struct request_queue;

struct block_device {
	dev_t			bd_dev;  /* not a kdev_t - it's a search key */
	int			bd_openers;
	struct inode *		bd_inode;	/* will die */
	struct super_block *	bd_super;
	struct mutex		bd_mutex;	/* open/close mutex */
	void *			bd_claiming;
	void *			bd_holder;
	int			bd_holders;
	bool			bd_write_holder;
#ifdef CONFIG_SYSFS
	struct list_head	bd_holder_disks;
#endif
	struct block_device *	bd_contains;
	unsigned		bd_block_size;
	u8			bd_partno;
	struct hd_struct *	bd_part;
	/* number of times partitions within this device have been opened. */
	unsigned		bd_part_count;
	int			bd_invalidated;
	struct gendisk *	bd_disk;
	struct request_queue *  bd_queue;
	struct backing_dev_info *bd_bdi;
	struct list_head	bd_list;
	/*
	 * Private data.  You must have bd_claim'ed the block_device
	 * to use this.  NOTE:  bd_claim allows an owner to claim
	 * the same device multiple times, the owner must take special
	 * care to not mess up bd_private for that case.
	 */
	unsigned long		bd_private;

	/* The counter of freeze processes */
	int			bd_fsfreeze_count;
	/* Mutex for freeze */
	struct mutex		bd_fsfreeze_mutex;
} __randomize_layout;

/* XArray tags, for tagging dirty and writeback pages in the pagecache. */
#define PAGECACHE_TAG_DIRTY	XA_MARK_0
#define PAGECACHE_TAG_WRITEBACK	XA_MARK_1
#define PAGECACHE_TAG_TOWRITE	XA_MARK_2

/*
 * Returns true if any of the pages in the mapping are marked with the tag.
 */
static inline bool mapping_tagged(struct address_space *mapping, xa_mark_t tag)
{
	return xa_marked(&mapping->i_pages, tag);
}

static inline void i_mmap_lock_write(struct address_space *mapping)
{
	down_write(&mapping->i_mmap_rwsem);
}

static inline void i_mmap_unlock_write(struct address_space *mapping)
{
	up_write(&mapping->i_mmap_rwsem);
}

static inline void i_mmap_lock_read(struct address_space *mapping)
{
	down_read(&mapping->i_mmap_rwsem);
}

static inline void i_mmap_unlock_read(struct address_space *mapping)
{
	up_read(&mapping->i_mmap_rwsem);
}

/*
 * Might pages of this file be mapped into userspace?
 */
static inline int mapping_mapped(struct address_space *mapping)
{
	return	!RB_EMPTY_ROOT(&mapping->i_mmap.rb_root);
}

/*
 * Might pages of this file have been modified in userspace?
 * Note that i_mmap_writable counts all VM_SHARED vmas: do_mmap_pgoff
 * marks vma as VM_SHARED if it is shared, and the file was opened for
 * writing i.e. vma may be mprotected writable even if now readonly.
 *
 * If i_mmap_writable is negative, no new writable mappings are allowed. You
 * can only deny writable mappings, if none exists right now.
 */
static inline int mapping_writably_mapped(struct address_space *mapping)
{
	return atomic_read(&mapping->i_mmap_writable) > 0;
}

static inline int mapping_map_writable(struct address_space *mapping)
{
	return atomic_inc_unless_negative(&mapping->i_mmap_writable) ?
		0 : -EPERM;
}

static inline void mapping_unmap_writable(struct address_space *mapping)
{
	atomic_dec(&mapping->i_mmap_writable);
}

static inline int mapping_deny_writable(struct address_space *mapping)
{
	return atomic_dec_unless_positive(&mapping->i_mmap_writable) ?
		0 : -EBUSY;
}

static inline void mapping_allow_writable(struct address_space *mapping)
{
	atomic_inc(&mapping->i_mmap_writable);
}

/*
 * Use sequence counter to get consistent i_size on 32-bit processors.
 */
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
#include <linux/seqlock.h>
#define __NEED_I_SIZE_ORDERED
#define i_size_ordered_init(inode) seqcount_init(&inode->i_size_seqcount)
#else
#define i_size_ordered_init(inode) do { } while (0)
#endif

struct posix_acl;
#define ACL_NOT_CACHED ((void *)(-1))
#define ACL_DONT_CACHE ((void *)(-3))

static inline struct posix_acl *
uncached_acl_sentinel(struct task_struct *task)
{
	return (void *)task + 1;
}

static inline bool
is_uncached_acl(struct posix_acl *acl)
{
	return (long)acl & 1;
}

#define IOP_FASTPERM	0x0001
#define IOP_LOOKUP	0x0002
#define IOP_NOFOLLOW	0x0004
#define IOP_XATTR	0x0008
#define IOP_DEFAULT_READLINK	0x0010

struct fsnotify_mark_connector;

/*
 * Keep mostly read-only and often accessed (especially for
 * the RCU path lookup and 'stat' data) fields at the beginning
 * of the 'struct inode'
 */
struct inode {
	umode_t			i_mode;
	unsigned short		i_opflags;
	kuid_t			i_uid;
	kgid_t			i_gid;
	unsigned int		i_flags;

#ifdef CONFIG_FS_POSIX_ACL
	struct posix_acl	*i_acl;
	struct posix_acl	*i_default_acl;
#endif

	const struct inode_operations	*i_op;
	struct super_block	*i_sb;
	struct address_space	*i_mapping;

#ifdef CONFIG_SECURITY
	void			*i_security;
#endif

	/* Stat data, not accessed from path walking */
	unsigned long		i_ino;
	/*
	 * Filesystems may only read i_nlink directly.  They shall use the
	 * following functions for modification:
	 *
	 *    (set|clear|inc|drop)_nlink
	 *    inode_(inc|dec)_link_count
	 */
	union {
		const unsigned int i_nlink;
		unsigned int __i_nlink;
	};
	dev_t			i_rdev;
	loff_t			i_size;
	struct timespec64	i_atime;
	struct timespec64	i_mtime;
	struct timespec64	i_ctime;
	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
	unsigned short          i_bytes;
	u8			i_blkbits;
	u8			i_write_hint;
	blkcnt_t		i_blocks;

#ifdef __NEED_I_SIZE_ORDERED
	seqcount_t		i_size_seqcount;
#endif

	/* Misc */
	unsigned long		i_state;
	struct rw_semaphore	i_rwsem;

	unsigned long		dirtied_when;	/* jiffies of first dirtying */
	unsigned long		dirtied_time_when;

	struct hlist_node	i_hash;
	struct list_head	i_io_list;	/* backing dev IO list */
#ifdef CONFIG_CGROUP_WRITEBACK
	struct bdi_writeback	*i_wb;		/* the associated cgroup wb */

	/* foreign inode detection, see wbc_detach_inode() */
	int			i_wb_frn_winner;
	u16			i_wb_frn_avg_time;
	u16			i_wb_frn_history;
#endif
	struct list_head	i_lru;		/* inode LRU list */
	struct list_head	i_sb_list;
	struct list_head	i_wb_list;	/* backing dev writeback list */
	union {
		struct hlist_head	i_dentry;
		struct rcu_head		i_rcu;
	};
	atomic64_t		i_version;
	atomic_t		i_count;
	atomic_t		i_dio_count;
	atomic_t		i_writecount;
#ifdef CONFIG_IMA
	atomic_t		i_readcount; /* struct files open RO */
#endif
	union {
		const struct file_operations	*i_fop;	/* former ->i_op->default_file_ops */
		void (*free_inode)(struct inode *);
	};
	struct file_lock_context	*i_flctx;
	struct address_space	i_data;
	struct list_head	i_devices;
	union {
		struct pipe_inode_info	*i_pipe;
		struct block_device	*i_bdev;
		struct cdev		*i_cdev;
		char			*i_link;
		unsigned		i_dir_seq;
	};

	__u32			i_generation;

#ifdef CONFIG_FSNOTIFY
	__u32			i_fsnotify_mask; /* all events this inode cares about */
	struct fsnotify_mark_connector __rcu	*i_fsnotify_marks;
#endif

#ifdef CONFIG_FS_ENCRYPTION
	struct fscrypt_info	*i_crypt_info;
#endif

	void			*i_private; /* fs or device private pointer */
} __randomize_layout;

static inline unsigned int i_blocksize(const struct inode *node)
{
	return (1 << node->i_blkbits);
}

static inline int inode_unhashed(struct inode *inode)
{
	return hlist_unhashed(&inode->i_hash);
}

/*
 * __mark_inode_dirty expects inodes to be hashed.  Since we don't
 * want special inodes in the fileset inode space, we make them
 * appear hashed, but do not put on any lists.  hlist_del()
 * will work fine and require no locking.
 */
static inline void inode_fake_hash(struct inode *inode)
{
	hlist_add_fake(&inode->i_hash);
}

/*
 * inode->i_mutex nesting subclasses for the lock validator:
 *
 * 0: the object of the current VFS operation
 * 1: parent
 * 2: child/target
 * 3: xattr
 * 4: second non-directory
 * 5: second parent (when locking independent directories in rename)
 *
 * I_MUTEX_NONDIR2 is for certain operations (such as rename) which lock two
 * non-directories at once.
 *
 * The locking order between these classes is
 * parent[2] -> child -> grandchild -> normal -> xattr -> second non-directory
 */
enum inode_i_mutex_lock_class
{
	I_MUTEX_NORMAL,
	I_MUTEX_PARENT,
	I_MUTEX_CHILD,
	I_MUTEX_XATTR,
	I_MUTEX_NONDIR2,
	I_MUTEX_PARENT2,
};

static inline void inode_lock(struct inode *inode)
{
	down_write(&inode->i_rwsem);
}

static inline void inode_unlock(struct inode *inode)
{
	up_write(&inode->i_rwsem);
}

static inline void inode_lock_shared(struct inode *inode)
{
	down_read(&inode->i_rwsem);
}

static inline void inode_unlock_shared(struct inode *inode)
{
	up_read(&inode->i_rwsem);
}

static inline int inode_trylock(struct inode *inode)
{
	return down_write_trylock(&inode->i_rwsem);
}

static inline int inode_trylock_shared(struct inode *inode)
{
	return down_read_trylock(&inode->i_rwsem);
}

static inline int inode_is_locked(struct inode *inode)
{
	return rwsem_is_locked(&inode->i_rwsem);
}

static inline void inode_lock_nested(struct inode *inode, unsigned subclass)
{
	down_write_nested(&inode->i_rwsem, subclass);
}

static inline void inode_lock_shared_nested(struct inode *inode, unsigned subclass)
{
	down_read_nested(&inode->i_rwsem, subclass);
}

void lock_two_nondirectories(struct inode *, struct inode*);
void unlock_two_nondirectories(struct inode *, struct inode*);

/*
 * NOTE: in a 32bit arch with a preemptable kernel and
 * an UP compile the i_size_read/write must be atomic
 * with respect to the local cpu (unlike with preempt disabled),
 * but they don't need to be atomic with respect to other cpus like in
 * true SMP (so they need either to either locally disable irq around
 * the read or for example on x86 they can be still implemented as a
 * cmpxchg8b without the need of the lock prefix). For SMP compiles
 * and 64bit archs it makes no difference if preempt is enabled or not.
 */
static inline loff_t i_size_read(const struct inode *inode)
{
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
	loff_t i_size;
	unsigned int seq;

	do {
		seq = read_seqcount_begin(&inode->i_size_seqcount);
		i_size = inode->i_size;
	} while (read_seqcount_retry(&inode->i_size_seqcount, seq));
	return i_size;
#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
	loff_t i_size;

	preempt_disable();
	i_size = inode->i_size;
	preempt_enable();
	return i_size;
#else
	return inode->i_size;
#endif
}

/*
 * NOTE: unlike i_size_read(), i_size_write() does need locking around it
 * (normally i_mutex), otherwise on 32bit/SMP an update of i_size_seqcount
 * can be lost, resulting in subsequent i_size_read() calls spinning forever.
 */
static inline void i_size_write(struct inode *inode, loff_t i_size)
{
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
	preempt_disable();
	write_seqcount_begin(&inode->i_size_seqcount);
	inode->i_size = i_size;
	write_seqcount_end(&inode->i_size_seqcount);
	preempt_enable();
#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
	preempt_disable();
	inode->i_size = i_size;
	preempt_enable();
#else
	inode->i_size = i_size;
#endif
}

static inline unsigned iminor(const struct inode *inode)
{
	return MINOR(inode->i_rdev);
}

static inline unsigned imajor(const struct inode *inode)
{
	return MAJOR(inode->i_rdev);
}

extern struct block_device *I_BDEV(struct inode *inode);

struct fown_struct {
	rwlock_t lock;          /* protects pid, uid, euid fields */
	struct pid *pid;	/* pid or -pgrp where SIGIO should be sent */
	enum pid_type pid_type;	/* Kind of process group SIGIO should be sent to */
	kuid_t uid, euid;	/* uid/euid of process setting the owner */
	int signum;		/* posix.1b rt signal to be delivered on IO */
};

/*
 * Track a single file's readahead state
 */
struct file_ra_state {
	pgoff_t start;			/* where readahead started */
	unsigned int size;		/* # of readahead pages */
	unsigned int async_size;	/* do asynchronous readahead when
					   there are only # of pages ahead */

	unsigned int ra_pages;		/* Maximum readahead window */
	unsigned int mmap_miss;		/* Cache miss stat for mmap accesses */
	loff_t prev_pos;		/* Cache last read() position */
};

/*
 * Check if @index falls in the readahead windows.
 */
static inline int ra_has_index(struct file_ra_state *ra, pgoff_t index)
{
	return (index >= ra->start &&
		index <  ra->start + ra->size);
}

struct file {
	union {
		struct llist_node	fu_llist;
		struct rcu_head 	fu_rcuhead;
	} f_u;
	struct path		f_path;
	struct inode		*f_inode;	/* cached value */
	const struct file_operations	*f_op;

	/*
	 * Protects f_ep_links, f_flags.
	 * Must not be taken from IRQ context.
	 */
	spinlock_t		f_lock;
	enum rw_hint		f_write_hint;
	atomic_long_t		f_count;
	unsigned int 		f_flags;
	fmode_t			f_mode;
	struct mutex		f_pos_lock;
	loff_t			f_pos;
	struct fown_struct	f_owner;
	const struct cred	*f_cred;
	struct file_ra_state	f_ra;

	u64			f_version;
#ifdef CONFIG_SECURITY
	void			*f_security;
#endif
	/* needed for tty driver, and maybe others */
	void			*private_data;

#ifdef CONFIG_EPOLL
	/* Used by fs/eventpoll.c to link all the hooks to this file */
	struct list_head	f_ep_links;
	struct list_head	f_tfile_llink;
#endif /* #ifdef CONFIG_EPOLL */
	struct address_space	*f_mapping;
	errseq_t		f_wb_err;
} __randomize_layout
  __attribute__((aligned(4)));	/* lest something weird decides that 2 is OK */

struct file_handle {
	__u32 handle_bytes;
	int handle_type;
	/* file identifier */
	unsigned char f_handle[0];
};

static inline struct file *get_file(struct file *f)
{
	atomic_long_inc(&f->f_count);
	return f;
}
#define get_file_rcu_many(x, cnt)	\
	atomic_long_add_unless(&(x)->f_count, (cnt), 0)
#define get_file_rcu(x) get_file_rcu_many((x), 1)
#define file_count(x)	atomic_long_read(&(x)->f_count)

#define	MAX_NON_LFS	((1UL<<31) - 1)

/* Page cache limit. The filesystems should put that into their s_maxbytes 
   limits, otherwise bad things can happen in VM. */ 
#if BITS_PER_LONG==32
#define MAX_LFS_FILESIZE	((loff_t)ULONG_MAX << PAGE_SHIFT)
#elif BITS_PER_LONG==64
#define MAX_LFS_FILESIZE 	((loff_t)LLONG_MAX)
#endif

#define FL_POSIX	1
#define FL_FLOCK	2
#define FL_DELEG	4	/* NFSv4 delegation */
#define FL_ACCESS	8	/* not trying to lock, just looking */
#define FL_EXISTS	16	/* when unlocking, test for existence */
#define FL_LEASE	32	/* lease held on this file */
#define FL_CLOSE	64	/* unlock on close */
#define FL_SLEEP	128	/* A blocking lock */
#define FL_DOWNGRADE_PENDING	256 /* Lease is being downgraded */
#define FL_UNLOCK_PENDING	512 /* Lease is being broken */
#define FL_OFDLCK	1024	/* lock is "owned" by struct file */
#define FL_LAYOUT	2048	/* outstanding pNFS layout */

#define FL_CLOSE_POSIX (FL_POSIX | FL_CLOSE)

/*
 * Special return value from posix_lock_file() and vfs_lock_file() for
 * asynchronous locking.
 */
#define FILE_LOCK_DEFERRED 1

/* legacy typedef, should eventually be removed */
typedef void *fl_owner_t;

struct file_lock;

struct file_lock_operations {
	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
	void (*fl_release_private)(struct file_lock *);
};

struct lock_manager_operations {
	int (*lm_compare_owner)(struct file_lock *, struct file_lock *);
	unsigned long (*lm_owner_key)(struct file_lock *);
	fl_owner_t (*lm_get_owner)(fl_owner_t);
	void (*lm_put_owner)(fl_owner_t);
	void (*lm_notify)(struct file_lock *);	/* unblock callback */
	int (*lm_grant)(struct file_lock *, int);
	bool (*lm_break)(struct file_lock *);
	int (*lm_change)(struct file_lock *, int, struct list_head *);
	void (*lm_setup)(struct file_lock *, void **);
};

struct lock_manager {
	struct list_head list;
	/*
	 * NFSv4 and up also want opens blocked during the grace period;
	 * NLM doesn't care:
	 */
	bool block_opens;
};

struct net;
void locks_start_grace(struct net *, struct lock_manager *);
void locks_end_grace(struct lock_manager *);
bool locks_in_grace(struct net *);
bool opens_in_grace(struct net *);

/* that will die - we need it for nfs_lock_info */
#include <linux/nfs_fs_i.h>

/*
 * struct file_lock represents a generic "file lock". It's used to represent
 * POSIX byte range locks, BSD (flock) locks, and leases. It's important to
 * note that the same struct is used to represent both a request for a lock and
 * the lock itself, but the same object is never used for both.
 *
 * FIXME: should we create a separate "struct lock_request" to help distinguish
 * these two uses?
 *
 * The varous i_flctx lists are ordered by:
 *
 * 1) lock owner
 * 2) lock range start
 * 3) lock range end
 *
 * Obviously, the last two criteria only matter for POSIX locks.
 */
struct file_lock {
	struct file_lock *fl_blocker;	/* The lock, that is blocking us */
	struct list_head fl_list;	/* link into file_lock_context */
	struct hlist_node fl_link;	/* node in global lists */
	struct list_head fl_blocked_requests;	/* list of requests with
						 * ->fl_blocker pointing here
						 */
	struct list_head fl_blocked_member;	/* node in
						 * ->fl_blocker->fl_blocked_requests
						 */
	fl_owner_t fl_owner;
	unsigned int fl_flags;
	unsigned char fl_type;
	unsigned int fl_pid;
	int fl_link_cpu;		/* what cpu's list is this on? */
	wait_queue_head_t fl_wait;
	struct file *fl_file;
	loff_t fl_start;
	loff_t fl_end;

	struct fasync_struct *	fl_fasync; /* for lease break notifications */
	/* for lease breaks: */
	unsigned long fl_break_time;
	unsigned long fl_downgrade_time;

	const struct file_lock_operations *fl_ops;	/* Callbacks for filesystems */
	const struct lock_manager_operations *fl_lmops;	/* Callbacks for lockmanagers */
	union {
		struct nfs_lock_info	nfs_fl;
		struct nfs4_lock_info	nfs4_fl;
		struct {
			struct list_head link;	/* link in AFS vnode's pending_locks list */
			int state;		/* state of grant or error if -ve */
			unsigned int	debug_id;
		} afs;
	} fl_u;
} __randomize_layout;

struct file_lock_context {
	spinlock_t		flc_lock;
	struct list_head	flc_flock;
	struct list_head	flc_posix;
	struct list_head	flc_lease;
};

/* The following constant reflects the upper bound of the file/locking space */
#ifndef OFFSET_MAX
#define INT_LIMIT(x)	(~((x)1 << (sizeof(x)*8 - 1)))
#define OFFSET_MAX	INT_LIMIT(loff_t)
#define OFFT_OFFSET_MAX	INT_LIMIT(off_t)
#endif

extern void send_sigio(struct fown_struct *fown, int fd, int band);

#define locks_inode(f) file_inode(f)

#ifdef CONFIG_FILE_LOCKING
extern int fcntl_getlk(struct file *, unsigned int, struct flock *);
extern int fcntl_setlk(unsigned int, struct file *, unsigned int,
			struct flock *);

#if BITS_PER_LONG == 32
extern int fcntl_getlk64(struct file *, unsigned int, struct flock64 *);
extern int fcntl_setlk64(unsigned int, struct file *, unsigned int,
			struct flock64 *);
#endif

extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
extern int fcntl_getlease(struct file *filp);

/* fs/locks.c */
void locks_free_lock_context(struct inode *inode);
void locks_free_lock(struct file_lock *fl);
extern void locks_init_lock(struct file_lock *);
extern struct file_lock * locks_alloc_lock(void);
extern void locks_copy_lock(struct file_lock *, struct file_lock *);
extern void locks_copy_conflock(struct file_lock *, struct file_lock *);
extern void locks_remove_posix(struct file *, fl_owner_t);
extern void locks_remove_file(struct file *);
extern void locks_release_private(struct file_lock *);
extern void posix_test_lock(struct file *, struct file_lock *);
extern int posix_lock_file(struct file *, struct file_lock *, struct file_lock *);
extern int locks_delete_block(struct file_lock *);
extern int vfs_test_lock(struct file *, struct file_lock *);
extern int vfs_lock_file(struct file *, unsigned int, struct file_lock *, struct file_lock *);
extern int vfs_cancel_lock(struct file *filp, struct file_lock *fl);
extern int locks_lock_inode_wait(struct inode *inode, struct file_lock *fl);
extern int __break_lease(struct inode *inode, unsigned int flags, unsigned int type);
extern void lease_get_mtime(struct inode *, struct timespec64 *time);
extern int generic_setlease(struct file *, long, struct file_lock **, void **priv);
extern int vfs_setlease(struct file *, long, struct file_lock **, void **);
extern int lease_modify(struct file_lock *, int, struct list_head *);
struct files_struct;
extern void show_fd_locks(struct seq_file *f,
			 struct file *filp, struct files_struct *files);
#else /* !CONFIG_FILE_LOCKING */
static inline int fcntl_getlk(struct file *file, unsigned int cmd,
			      struct flock __user *user)
{
	return -EINVAL;
}

static inline int fcntl_setlk(unsigned int fd, struct file *file,
			      unsigned int cmd, struct flock __user *user)
{
	return -EACCES;
}

#if BITS_PER_LONG == 32
static inline int fcntl_getlk64(struct file *file, unsigned int cmd,
				struct flock64 __user *user)
{
	return -EINVAL;
}

static inline int fcntl_setlk64(unsigned int fd, struct file *file,
				unsigned int cmd, struct flock64 __user *user)
{
	return -EACCES;
}
#endif
static inline int fcntl_setlease(unsigned int fd, struct file *filp, long arg)
{
	return -EINVAL;
}

static inline int fcntl_getlease(struct file *filp)
{
	return F_UNLCK;
}

static inline void
locks_free_lock_context(struct inode *inode)
{
}

static inline void locks_init_lock(struct file_lock *fl)
{
	return;
}

static inline void locks_copy_conflock(struct file_lock *new, struct file_lock *fl)
{
	return;
}

static inline void locks_copy_lock(struct file_lock *new, struct file_lock *fl)
{
	return;
}

static inline void locks_remove_posix(struct file *filp, fl_owner_t owner)
{
	return;
}

static inline void locks_remove_file(struct file *filp)
{
	return;
}

static inline void posix_test_lock(struct file *filp, struct file_lock *fl)
{
	return;
}

static inline int posix_lock_file(struct file *filp, struct file_lock *fl,
				  struct file_lock *conflock)
{
	return -ENOLCK;
}

static inline int locks_delete_block(struct file_lock *waiter)
{
	return -ENOENT;
}

static inline int vfs_test_lock(struct file *filp, struct file_lock *fl)
{
	return 0;
}

static inline int vfs_lock_file(struct file *filp, unsigned int cmd,
				struct file_lock *fl, struct file_lock *conf)
{
	return -ENOLCK;
}

static inline int vfs_cancel_lock(struct file *filp, struct file_lock *fl)
{
	return 0;
}

static inline int locks_lock_inode_wait(struct inode *inode, struct file_lock *fl)
{
	return -ENOLCK;
}

static inline int __break_lease(struct inode *inode, unsigned int mode, unsigned int type)
{
	return 0;
}

static inline void lease_get_mtime(struct inode *inode,
				   struct timespec64 *time)
{
	return;
}

static inline int generic_setlease(struct file *filp, long arg,
				    struct file_lock **flp, void **priv)
{
	return -EINVAL;
}

static inline int vfs_setlease(struct file *filp, long arg,
			       struct file_lock **lease, void **priv)
{
	return -EINVAL;
}

static inline int lease_modify(struct file_lock *fl, int arg,
			       struct list_head *dispose)
{
	return -EINVAL;
}

struct files_struct;
static inline void show_fd_locks(struct seq_file *f,
			struct file *filp, struct files_struct *files) {}
#endif /* !CONFIG_FILE_LOCKING */

static inline struct inode *file_inode(const struct file *f)
{
	return f->f_inode;
}

static inline struct dentry *file_dentry(const struct file *file)
{
	return d_real(file->f_path.dentry, file_inode(file));
}

static inline int locks_lock_file_wait(struct file *filp, struct file_lock *fl)
{
	return locks_lock_inode_wait(locks_inode(filp), fl);
}

struct fasync_struct {
	rwlock_t		fa_lock;
	int			magic;
	int			fa_fd;
	struct fasync_struct	*fa_next; /* singly linked list */
	struct file		*fa_file;
	struct rcu_head		fa_rcu;
};

#define FASYNC_MAGIC 0x4601

/* SMP safe fasync helpers: */
extern int fasync_helper(int, struct file *, int, struct fasync_struct **);
extern struct fasync_struct *fasync_insert_entry(int, struct file *, struct fasync_struct **, struct fasync_struct *);
extern int fasync_remove_entry(struct file *, struct fasync_struct **);
extern struct fasync_struct *fasync_alloc(void);
extern void fasync_free(struct fasync_struct *);

/* can be called from interrupts */
extern void kill_fasync(struct fasync_struct **, int, int);

extern void __f_setown(struct file *filp, struct pid *, enum pid_type, int force);
extern int f_setown(struct file *filp, unsigned long arg, int force);
extern void f_delown(struct file *filp);
extern pid_t f_getown(struct file *filp);
extern int send_sigurg(struct fown_struct *fown);

/*
 * sb->s_flags.  Note that these mirror the equivalent MS_* flags where
 * represented in both.
 */
#define SB_RDONLY	 1	/* Mount read-only */
#define SB_NOSUID	 2	/* Ignore suid and sgid bits */
#define SB_NODEV	 4	/* Disallow access to device special files */
#define SB_NOEXEC	 8	/* Disallow program execution */
#define SB_SYNCHRONOUS	16	/* Writes are synced at once */
#define SB_MANDLOCK	64	/* Allow mandatory locks on an FS */
#define SB_DIRSYNC	128	/* Directory modifications are synchronous */
#define SB_NOATIME	1024	/* Do not update access times. */
#define SB_NODIRATIME	2048	/* Do not update directory access times */
#define SB_SILENT	32768
#define SB_POSIXACL	(1<<16)	/* VFS does not apply the umask */
#define SB_KERNMOUNT	(1<<22) /* this is a kern_mount call */
#define SB_I_VERSION	(1<<23) /* Update inode I_version field */
#define SB_LAZYTIME	(1<<25) /* Update the on-disk [acm]times lazily */

/* These sb flags are internal to the kernel */
#define SB_SUBMOUNT     (1<<26)
#define SB_FORCE    	(1<<27)
#define SB_NOSEC	(1<<28)
#define SB_BORN		(1<<29)
#define SB_ACTIVE	(1<<30)
#define SB_NOUSER	(1<<31)

/*
 *	Umount options
 */

#define MNT_FORCE	0x00000001	/* Attempt to forcibily umount */
#define MNT_DETACH	0x00000002	/* Just detach from the tree */
#define MNT_EXPIRE	0x00000004	/* Mark for expiry */
#define UMOUNT_NOFOLLOW	0x00000008	/* Don't follow symlink on umount */
#define UMOUNT_UNUSED	0x80000000	/* Flag guaranteed to be unused */

/* sb->s_iflags */
#define SB_I_CGROUPWB	0x00000001	/* cgroup-aware writeback enabled */
#define SB_I_NOEXEC	0x00000002	/* Ignore executables on this fs */
#define SB_I_NODEV	0x00000004	/* Ignore devices on this fs */
#define SB_I_MULTIROOT	0x00000008	/* Multiple roots to the dentry tree */

/* sb->s_iflags to limit user namespace mounts */
#define SB_I_USERNS_VISIBLE		0x00000010 /* fstype already mounted */
#define SB_I_IMA_UNVERIFIABLE_SIGNATURE	0x00000020
#define SB_I_UNTRUSTED_MOUNTER		0x00000040

/* Possible states of 'frozen' field */
enum {
	SB_UNFROZEN = 0,		/* FS is unfrozen */
	SB_FREEZE_WRITE	= 1,		/* Writes, dir ops, ioctls frozen */
	SB_FREEZE_PAGEFAULT = 2,	/* Page faults stopped as well */
	SB_FREEZE_FS = 3,		/* For internal FS use (e.g. to stop
					 * internal threads if needed) */
	SB_FREEZE_COMPLETE = 4,		/* ->freeze_fs finished successfully */
};

#define SB_FREEZE_LEVELS (SB_FREEZE_COMPLETE - 1)

struct sb_writers {
	int				frozen;		/* Is sb frozen? */
	wait_queue_head_t		wait_unfrozen;	/* for get_super_thawed() */
	struct percpu_rw_semaphore	rw_sem[SB_FREEZE_LEVELS];
};

struct super_block {
	struct list_head	s_list;		/* Keep this first */
	dev_t			s_dev;		/* search index; _not_ kdev_t */
	unsigned char		s_blocksize_bits;
	unsigned long		s_blocksize;
	loff_t			s_maxbytes;	/* Max file size */
	struct file_system_type	*s_type;
	const struct super_operations	*s_op;
	const struct dquot_operations	*dq_op;
	const struct quotactl_ops	*s_qcop;
	const struct export_operations *s_export_op;
	unsigned long		s_flags;
	unsigned long		s_iflags;	/* internal SB_I_* flags */
	unsigned long		s_magic;
	struct dentry		*s_root;
	struct rw_semaphore	s_umount;
	int			s_count;
	atomic_t		s_active;
#ifdef CONFIG_SECURITY
	void                    *s_security;
#endif
	const struct xattr_handler **s_xattr;
#ifdef CONFIG_FS_ENCRYPTION
	const struct fscrypt_operations	*s_cop;
#endif
	struct hlist_bl_head	s_roots;	/* alternate root dentries for NFS */
	struct list_head	s_mounts;	/* list of mounts; _not_ for fs use */
	struct block_device	*s_bdev;
	struct backing_dev_info *s_bdi;
	struct mtd_info		*s_mtd;
	struct hlist_node	s_instances;
	unsigned int		s_quota_types;	/* Bitmask of supported quota types */
	struct quota_info	s_dquot;	/* Diskquota specific options */

	struct sb_writers	s_writers;

	/*
	 * Keep s_fs_info, s_time_gran, s_fsnotify_mask, and
	 * s_fsnotify_marks together for cache efficiency. They are frequently
	 * accessed and rarely modified.
	 */
	void			*s_fs_info;	/* Filesystem private info */

	/* Granularity of c/m/atime in ns (cannot be worse than a second) */
	u32			s_time_gran;
#ifdef CONFIG_FSNOTIFY
	__u32			s_fsnotify_mask;
	struct fsnotify_mark_connector __rcu	*s_fsnotify_marks;
#endif

	char			s_id[32];	/* Informational name */
	uuid_t			s_uuid;		/* UUID */

	unsigned int		s_max_links;
	fmode_t			s_mode;

	/*
	 * The next field is for VFS *only*. No filesystems have any business
	 * even looking at it. You had been warned.
	 */
	struct mutex s_vfs_rename_mutex;	/* Kludge */

	/*
	 * Filesystem subtype.  If non-empty the filesystem type field
	 * in /proc/mounts will be "type.subtype"
	 */
	const char *s_subtype;

	const struct dentry_operations *s_d_op; /* default d_op for dentries */

	/*
	 * Saved pool identifier for cleancache (-1 means none)
	 */
	int cleancache_poolid;

	struct shrinker s_shrink;	/* per-sb shrinker handle */

	/* Number of inodes with nlink == 0 but still referenced */
	atomic_long_t s_remove_count;

	/* Pending fsnotify inode refs */
	atomic_long_t s_fsnotify_inode_refs;

	/* Being remounted read-only */
	int s_readonly_remount;

	/* AIO completions deferred from interrupt context */
	struct workqueue_struct *s_dio_done_wq;
	struct hlist_head s_pins;

	/*
	 * Owning user namespace and default context in which to
	 * interpret filesystem uids, gids, quotas, device nodes,
	 * xattrs and security labels.
	 */
	struct user_namespace *s_user_ns;

	/*
	 * The list_lru structure is essentially just a pointer to a table
	 * of per-node lru lists, each of which has its own spinlock.
	 * There is no need to put them into separate cachelines.
	 */
	struct list_lru		s_dentry_lru;
	struct list_lru		s_inode_lru;
	struct rcu_head		rcu;
	struct work_struct	destroy_work;

	struct mutex		s_sync_lock;	/* sync serialisation lock */

	/*
	 * Indicates how deep in a filesystem stack this SB is
	 */
	int s_stack_depth;

	/* s_inode_list_lock protects s_inodes */
	spinlock_t		s_inode_list_lock ____cacheline_aligned_in_smp;
	struct list_head	s_inodes;	/* all inodes */

	spinlock_t		s_inode_wblist_lock;
	struct list_head	s_inodes_wb;	/* writeback inodes */
} __randomize_layout;

/* Helper functions so that in most cases filesystems will
 * not need to deal directly with kuid_t and kgid_t and can
 * instead deal with the raw numeric values that are stored
 * in the filesystem.
 */
static inline uid_t i_uid_read(const struct inode *inode)
{
	return from_kuid(inode->i_sb->s_user_ns, inode->i_uid);
}

static inline gid_t i_gid_read(const struct inode *inode)
{
	return from_kgid(inode->i_sb->s_user_ns, inode->i_gid);
}

static inline void i_uid_write(struct inode *inode, uid_t uid)
{
	inode->i_uid = make_kuid(inode->i_sb->s_user_ns, uid);
}

static inline void i_gid_write(struct inode *inode, gid_t gid)
{
	inode->i_gid = make_kgid(inode->i_sb->s_user_ns, gid);
}

extern struct timespec64 timespec64_trunc(struct timespec64 t, unsigned gran);
extern struct timespec64 current_time(struct inode *inode);

/*
 * Snapshotting support.
 */

void __sb_end_write(struct super_block *sb, int level);
int __sb_start_write(struct super_block *sb, int level, bool wait);

#define __sb_writers_acquired(sb, lev)	\
	percpu_rwsem_acquire(&(sb)->s_writers.rw_sem[(lev)-1], 1, _THIS_IP_)
#define __sb_writers_release(sb, lev)	\
	percpu_rwsem_release(&(sb)->s_writers.rw_sem[(lev)-1], 1, _THIS_IP_)

/**
 * sb_end_write - drop write access to a superblock
 * @sb: the super we wrote to
 *
 * Decrement number of writers to the filesystem. Wake up possible waiters
 * wanting to freeze the filesystem.
 */
static inline void sb_end_write(struct super_block *sb)
{
	__sb_end_write(sb, SB_FREEZE_WRITE);
}

/**
 * sb_end_pagefault - drop write access to a superblock from a page fault
 * @sb: the super we wrote to
 *
 * Decrement number of processes handling write page fault to the filesystem.
 * Wake up possible waiters wanting to freeze the filesystem.
 */
static inline void sb_end_pagefault(struct super_block *sb)
{
	__sb_end_write(sb, SB_FREEZE_PAGEFAULT);
}

/**
 * sb_end_intwrite - drop write access to a superblock for internal fs purposes
 * @sb: the super we wrote to
 *
 * Decrement fs-internal number of writers to the filesystem.  Wake up possible
 * waiters wanting to freeze the filesystem.
 */
static inline void sb_end_intwrite(struct super_block *sb)
{
	__sb_end_write(sb, SB_FREEZE_FS);
}

/**
 * sb_start_write - get write access to a superblock
 * @sb: the super we write to
 *
 * When a process wants to write data or metadata to a file system (i.e. dirty
 * a page or an inode), it should embed the operation in a sb_start_write() -
 * sb_end_write() pair to get exclusion against file system freezing. This
 * function increments number of writers preventing freezing. If the file
 * system is already frozen, the function waits until the file system is
 * thawed.
 *
 * Since freeze protection behaves as a lock, users have to preserve
 * ordering of freeze protection and other filesystem locks. Generally,
 * freeze protection should be the outermost lock. In particular, we have:
 *
 * sb_start_write
 *   -> i_mutex			(write path, truncate, directory ops, ...)
 *   -> s_umount		(freeze_super, thaw_super)
 */
static inline void sb_start_write(struct super_block *sb)
{
	__sb_start_write(sb, SB_FREEZE_WRITE, true);
}

static inline int sb_start_write_trylock(struct super_block *sb)
{
	return __sb_start_write(sb, SB_FREEZE_WRITE, false);
}

/**
 * sb_start_pagefault - get write access to a superblock from a page fault
 * @sb: the super we write to
 *
 * When a process starts handling write page fault, it should embed the
 * operation into sb_start_pagefault() - sb_end_pagefault() pair to get
 * exclusion against file system freezing. This is needed since the page fault
 * is going to dirty a page. This function increments number of running page
 * faults preventing freezing. If the file system is already frozen, the
 * function waits until the file system is thawed.
 *
 * Since page fault freeze protection behaves as a lock, users have to preserve
 * ordering of freeze protection and other filesystem locks. It is advised to
 * put sb_start_pagefault() close to mmap_sem in lock ordering. Page fault
 * handling code implies lock dependency:
 *
 * mmap_sem
 *   -> sb_start_pagefault
 */
static inline void sb_start_pagefault(struct super_block *sb)
{
	__sb_start_write(sb, SB_FREEZE_PAGEFAULT, true);
}

/*
 * sb_start_intwrite - get write access to a superblock for internal fs purposes
 * @sb: the super we write to
 *
 * This is the third level of protection against filesystem freezing. It is
 * free for use by a filesystem. The only requirement is that it must rank
 * below sb_start_pagefault.
 *
 * For example filesystem can call sb_start_intwrite() when starting a
 * transaction which somewhat eases handling of freezing for internal sources
 * of filesystem changes (internal fs threads, discarding preallocation on file
 * close, etc.).
 */
static inline void sb_start_intwrite(struct super_block *sb)
{
	__sb_start_write(sb, SB_FREEZE_FS, true);
}

static inline int sb_start_intwrite_trylock(struct super_block *sb)
{
	return __sb_start_write(sb, SB_FREEZE_FS, false);
}


extern bool inode_owner_or_capable(const struct inode *inode);

/*
 * VFS helper functions..
 */
extern int vfs_create(struct inode *, struct dentry *, umode_t, bool);
extern int vfs_mkdir(struct inode *, struct dentry *, umode_t);
extern int vfs_mknod(struct inode *, struct dentry *, umode_t, dev_t);
extern int vfs_symlink(struct inode *, struct dentry *, const char *);
extern int vfs_link(struct dentry *, struct inode *, struct dentry *, struct inode **);
extern int vfs_rmdir(struct inode *, struct dentry *);
extern int vfs_unlink(struct inode *, struct dentry *, struct inode **);
extern int vfs_rename(struct inode *, struct dentry *, struct inode *, struct dentry *, struct inode **, unsigned int);
extern int vfs_whiteout(struct inode *, struct dentry *);

extern struct dentry *vfs_tmpfile(struct dentry *dentry, umode_t mode,
				  int open_flag);

int vfs_mkobj(struct dentry *, umode_t,
		int (*f)(struct dentry *, umode_t, void *),
		void *);

extern long vfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);

/*
 * VFS file helper functions.
 */
extern void inode_init_owner(struct inode *inode, const struct inode *dir,
			umode_t mode);
extern bool may_open_dev(const struct path *path);
/*
 * VFS FS_IOC_FIEMAP helper definitions.
 */
struct fiemap_extent_info {
	unsigned int fi_flags;		/* Flags as passed from user */
	unsigned int fi_extents_mapped;	/* Number of mapped extents */
	unsigned int fi_extents_max;	/* Size of fiemap_extent array */
	struct fiemap_extent __user *fi_extents_start; /* Start of
							fiemap_extent array */
};
int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical,
			    u64 phys, u64 len, u32 flags);
int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);

/*
 * This is the "filldir" function type, used by readdir() to let
 * the kernel specify what kind of dirent layout it wants to have.
 * This allows the kernel to read directories into kernel space or
 * to have different dirent layouts depending on the binary type.
 */
struct dir_context;
typedef int (*filldir_t)(struct dir_context *, const char *, int, loff_t, u64,
			 unsigned);

struct dir_context {
	filldir_t actor;
	loff_t pos;
};

struct block_device_operations;

/* These macros are for out of kernel modules to test that
 * the kernel supports the unlocked_ioctl and compat_ioctl
 * fields in struct file_operations. */
#define HAVE_COMPAT_IOCTL 1
#define HAVE_UNLOCKED_IOCTL 1

/*
 * These flags let !MMU mmap() govern direct device mapping vs immediate
 * copying more easily for MAP_PRIVATE, especially for ROM filesystems.
 *
 * NOMMU_MAP_COPY:	Copy can be mapped (MAP_PRIVATE)
 * NOMMU_MAP_DIRECT:	Can be mapped directly (MAP_SHARED)
 * NOMMU_MAP_READ:	Can be mapped for reading
 * NOMMU_MAP_WRITE:	Can be mapped for writing
 * NOMMU_MAP_EXEC:	Can be mapped for execution
 */
#define NOMMU_MAP_COPY		0x00000001
#define NOMMU_MAP_DIRECT	0x00000008
#define NOMMU_MAP_READ		VM_MAYREAD
#define NOMMU_MAP_WRITE		VM_MAYWRITE
#define NOMMU_MAP_EXEC		VM_MAYEXEC

#define NOMMU_VMFLAGS \
	(NOMMU_MAP_READ | NOMMU_MAP_WRITE | NOMMU_MAP_EXEC)

/*
 * These flags control the behavior of the remap_file_range function pointer.
 * If it is called with len == 0 that means "remap to end of source file".
 * See Documentation/filesystems/vfs.txt for more details about this call.
 *
 * REMAP_FILE_DEDUP: only remap if contents identical (i.e. deduplicate)
 * REMAP_FILE_CAN_SHORTEN: caller can handle a shortened request
 */
#define REMAP_FILE_DEDUP		(1 << 0)
#define REMAP_FILE_CAN_SHORTEN		(1 << 1)

/*
 * These flags signal that the caller is ok with altering various aspects of
 * the behavior of the remap operation.  The changes must be made by the
 * implementation; the vfs remap helper functions can take advantage of them.
 * Flags in this category exist to preserve the quirky behavior of the hoisted
 * btrfs clone/dedupe ioctls.
 */
#define REMAP_FILE_ADVISORY		(REMAP_FILE_CAN_SHORTEN)

struct iov_iter;

struct file_operations {
	struct module *owner;
	loff_t (*llseek) (struct file *, loff_t, int);
	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
	ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
	ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
	int (*iopoll)(struct kiocb *kiocb, bool spin);
	int (*iterate) (struct file *, struct dir_context *);
	int (*iterate_shared) (struct file *, struct dir_context *);
	__poll_t (*poll) (struct file *, struct poll_table_struct *);
	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
	int (*mmap) (struct file *, struct vm_area_struct *);
	unsigned long mmap_supported_flags;
	int (*open) (struct inode *, struct file *);
	int (*flush) (struct file *, fl_owner_t id);
	int (*release) (struct inode *, struct file *);
	int (*fsync) (struct file *, loff_t, loff_t, int datasync);
	int (*fasync) (int, struct file *, int);
	int (*lock) (struct file *, int, struct file_lock *);
	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
	unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
	int (*check_flags)(int);
	int (*flock) (struct file *, int, struct file_lock *);
	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
	ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
	int (*setlease)(struct file *, long, struct file_lock **, void **);
	long (*fallocate)(struct file *file, int mode, loff_t offset,
			  loff_t len);
	void (*show_fdinfo)(struct seq_file *m, struct file *f);
#ifndef CONFIG_MMU
	unsigned (*mmap_capabilities)(struct file *);
#endif
	ssize_t (*copy_file_range)(struct file *, loff_t, struct file *,
			loff_t, size_t, unsigned int);
	loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in,
				   struct file *file_out, loff_t pos_out,
				   loff_t len, unsigned int remap_flags);
	int (*fadvise)(struct file *, loff_t, loff_t, int);
} __randomize_layout;

struct inode_operations {
	struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
	const char * (*get_link) (struct dentry *, struct inode *, struct delayed_call *);
	int (*permission) (struct inode *, int);
	struct posix_acl * (*get_acl)(struct inode *, int);

	int (*readlink) (struct dentry *, char __user *,int);

	int (*create) (struct inode *,struct dentry *, umode_t, bool);
	int (*link) (struct dentry *,struct inode *,struct dentry *);
	int (*unlink) (struct inode *,struct dentry *);
	int (*symlink) (struct inode *,struct dentry *,const char *);
	int (*mkdir) (struct inode *,struct dentry *,umode_t);
	int (*rmdir) (struct inode *,struct dentry *);
	int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
	int (*rename) (struct inode *, struct dentry *,
			struct inode *, struct dentry *, unsigned int);
	int (*setattr) (struct dentry *, struct iattr *);
	int (*getattr) (const struct path *, struct kstat *, u32, unsigned int);
	ssize_t (*listxattr) (struct dentry *, char *, size_t);
	int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start,
		      u64 len);
	int (*update_time)(struct inode *, struct timespec64 *, int);
	int (*atomic_open)(struct inode *, struct dentry *,
			   struct file *, unsigned open_flag,
			   umode_t create_mode);
	int (*tmpfile) (struct inode *, struct dentry *, umode_t);
	int (*set_acl)(struct inode *, struct posix_acl *, int);
} ____cacheline_aligned;

static inline ssize_t call_read_iter(struct file *file, struct kiocb *kio,
				     struct iov_iter *iter)
{
	return file->f_op->read_iter(kio, iter);
}

static inline ssize_t call_write_iter(struct file *file, struct kiocb *kio,
				      struct iov_iter *iter)
{
	return file->f_op->write_iter(kio, iter);
}

static inline int call_mmap(struct file *file, struct vm_area_struct *vma)
{
	return file->f_op->mmap(file, vma);
}

ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
			      unsigned long nr_segs, unsigned long fast_segs,
			      struct iovec *fast_pointer,
			      struct iovec **ret_pointer);

extern ssize_t __vfs_read(struct file *, char __user *, size_t, loff_t *);
extern ssize_t vfs_read(struct file *, char __user *, size_t, loff_t *);
extern ssize_t vfs_write(struct file *, const char __user *, size_t, loff_t *);
extern ssize_t vfs_readv(struct file *, const struct iovec __user *,
		unsigned long, loff_t *, rwf_t);
extern ssize_t vfs_copy_file_range(struct file *, loff_t , struct file *,
				   loff_t, size_t, unsigned int);
extern int generic_remap_file_range_prep(struct file *file_in, loff_t pos_in,
					 struct file *file_out, loff_t pos_out,
					 loff_t *count,
					 unsigned int remap_flags);
extern loff_t do_clone_file_range(struct file *file_in, loff_t pos_in,
				  struct file *file_out, loff_t pos_out,
				  loff_t len, unsigned int remap_flags);
extern loff_t vfs_clone_file_range(struct file *file_in, loff_t pos_in,
				   struct file *file_out, loff_t pos_out,
				   loff_t len, unsigned int remap_flags);
extern int vfs_dedupe_file_range(struct file *file,
				 struct file_dedupe_range *same);
extern loff_t vfs_dedupe_file_range_one(struct file *src_file, loff_t src_pos,
					struct file *dst_file, loff_t dst_pos,
					loff_t len, unsigned int remap_flags);


struct super_operations {
   	struct inode *(*alloc_inode)(struct super_block *sb);
	void (*destroy_inode)(struct inode *);
	void (*free_inode)(struct inode *);

   	void (*dirty_inode) (struct inode *, int flags);
	int (*write_inode) (struct inode *, struct writeback_control *wbc);
	int (*drop_inode) (struct inode *);
	void (*evict_inode) (struct inode *);
	void (*put_super) (struct super_block *);
	int (*sync_fs)(struct super_block *sb, int wait);
	int (*freeze_super) (struct super_block *);
	int (*freeze_fs) (struct super_block *);
	int (*thaw_super) (struct super_block *);
	int (*unfreeze_fs) (struct super_block *);
	int (*statfs) (struct dentry *, struct kstatfs *);
	int (*remount_fs) (struct super_block *, int *, char *);
	void (*umount_begin) (struct super_block *);

	int (*show_options)(struct seq_file *, struct dentry *);
	int (*show_devname)(struct seq_file *, struct dentry *);
	int (*show_path)(struct seq_file *, struct dentry *);
	int (*show_stats)(struct seq_file *, struct dentry *);
#ifdef CONFIG_QUOTA
	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
	struct dquot **(*get_dquots)(struct inode *);
#endif
	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
	long (*nr_cached_objects)(struct super_block *,
				  struct shrink_control *);
	long (*free_cached_objects)(struct super_block *,
				    struct shrink_control *);
};

/*
 * Inode flags - they have no relation to superblock flags now
 */
#define S_SYNC		1	/* Writes are synced at once */
#define S_NOATIME	2	/* Do not update access times */
#define S_APPEND	4	/* Append-only file */
#define S_IMMUTABLE	8	/* Immutable file */
#define S_DEAD		16	/* removed, but still open directory */
#define S_NOQUOTA	32	/* Inode is not counted to quota */
#define S_DIRSYNC	64	/* Directory modifications are synchronous */
#define S_NOCMTIME	128	/* Do not update file c/mtime */
#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
#define S_PRIVATE	512	/* Inode is fs-internal */
#define S_IMA		1024	/* Inode has an associated IMA struct */
#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
#define S_NOSEC		4096	/* no suid or xattr security attributes */
#ifdef CONFIG_FS_DAX
#define S_DAX		8192	/* Direct Access, avoiding the page cache */
#else
#define S_DAX		0	/* Make all the DAX code disappear */
#endif
#define S_ENCRYPTED	16384	/* Encrypted file (using fs/crypto/) */
#define S_CASEFOLD	32768	/* Casefolded file */

/*
 * Note that nosuid etc flags are inode-specific: setting some file-system
 * flags just means all the inodes inherit those flags by default. It might be
 * possible to override it selectively if you really wanted to with some
 * ioctl() that is not currently implemented.
 *
 * Exception: SB_RDONLY is always applied to the entire file system.
 *
 * Unfortunately, it is possible to change a filesystems flags with it mounted
 * with files in use.  This means that all of the inodes will not have their
 * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
 * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
 */
#define __IS_FLG(inode, flg)	((inode)->i_sb->s_flags & (flg))

static inline bool sb_rdonly(const struct super_block *sb) { return sb->s_flags & SB_RDONLY; }
#define IS_RDONLY(inode)	sb_rdonly((inode)->i_sb)
#define IS_SYNC(inode)		(__IS_FLG(inode, SB_SYNCHRONOUS) || \
					((inode)->i_flags & S_SYNC))
#define IS_DIRSYNC(inode)	(__IS_FLG(inode, SB_SYNCHRONOUS|SB_DIRSYNC) || \
					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
#define IS_MANDLOCK(inode)	__IS_FLG(inode, SB_MANDLOCK)
#define IS_NOATIME(inode)	__IS_FLG(inode, SB_RDONLY|SB_NOATIME)
#define IS_I_VERSION(inode)	__IS_FLG(inode, SB_I_VERSION)

#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
#define IS_POSIXACL(inode)	__IS_FLG(inode, SB_POSIXACL)

#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
#define IS_DAX(inode)		((inode)->i_flags & S_DAX)
#define IS_ENCRYPTED(inode)	((inode)->i_flags & S_ENCRYPTED)
#define IS_CASEFOLDED(inode)	((inode)->i_flags & S_CASEFOLD)

#define IS_WHITEOUT(inode)	(S_ISCHR(inode->i_mode) && \
				 (inode)->i_rdev == WHITEOUT_DEV)

static inline bool HAS_UNMAPPED_ID(struct inode *inode)
{
	return !uid_valid(inode->i_uid) || !gid_valid(inode->i_gid);
}

static inline enum rw_hint file_write_hint(struct file *file)
{
	if (file->f_write_hint != WRITE_LIFE_NOT_SET)
		return file->f_write_hint;

	return file_inode(file)->i_write_hint;
}

static inline int iocb_flags(struct file *file);

static inline u16 ki_hint_validate(enum rw_hint hint)
{
	typeof(((struct kiocb *)0)->ki_hint) max_hint = -1;

	if (hint <= max_hint)
		return hint;
	return 0;
}

static inline void init_sync_kiocb(struct kiocb *kiocb, struct file *filp)
{
	*kiocb = (struct kiocb) {
		.ki_filp = filp,
		.ki_flags = iocb_flags(filp),
		.ki_hint = ki_hint_validate(file_write_hint(filp)),
		.ki_ioprio = get_current_ioprio(),
	};
}

/*
 * Inode state bits.  Protected by inode->i_lock
 *
 * Three bits determine the dirty state of the inode, I_DIRTY_SYNC,
 * I_DIRTY_DATASYNC and I_DIRTY_PAGES.
 *
 * Four bits define the lifetime of an inode.  Initially, inodes are I_NEW,
 * until that flag is cleared.  I_WILL_FREE, I_FREEING and I_CLEAR are set at
 * various stages of removing an inode.
 *
 * Two bits are used for locking and completion notification, I_NEW and I_SYNC.
 *
 * I_DIRTY_SYNC		Inode is dirty, but doesn't have to be written on
 *			fdatasync().  i_atime is the usual cause.
 * I_DIRTY_DATASYNC	Data-related inode changes pending. We keep track of
 *			these changes separately from I_DIRTY_SYNC so that we
 *			don't have to write inode on fdatasync() when only
 *			mtime has changed in it.
 * I_DIRTY_PAGES	Inode has dirty pages.  Inode itself may be clean.
 * I_NEW		Serves as both a mutex and completion notification.
 *			New inodes set I_NEW.  If two processes both create
 *			the same inode, one of them will release its inode and
 *			wait for I_NEW to be released before returning.
 *			Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can
 *			also cause waiting on I_NEW, without I_NEW actually
 *			being set.  find_inode() uses this to prevent returning
 *			nearly-dead inodes.
 * I_WILL_FREE		Must be set when calling write_inode_now() if i_count
 *			is zero.  I_FREEING must be set when I_WILL_FREE is
 *			cleared.
 * I_FREEING		Set when inode is about to be freed but still has dirty
 *			pages or buffers attached or the inode itself is still
 *			dirty.
 * I_CLEAR		Added by clear_inode().  In this state the inode is
 *			clean and can be destroyed.  Inode keeps I_FREEING.
 *
 *			Inodes that are I_WILL_FREE, I_FREEING or I_CLEAR are
 *			prohibited for many purposes.  iget() must wait for
 *			the inode to be completely released, then create it
 *			anew.  Other functions will just ignore such inodes,
 *			if appropriate.  I_NEW is used for waiting.
 *
 * I_SYNC		Writeback of inode is running. The bit is set during
 *			data writeback, and cleared with a wakeup on the bit
 *			address once it is done. The bit is also used to pin
 *			the inode in memory for flusher thread.
 *
 * I_REFERENCED		Marks the inode as recently references on the LRU list.
 *
 * I_DIO_WAKEUP		Never set.  Only used as a key for wait_on_bit().
 *
 * I_WB_SWITCH		Cgroup bdi_writeback switching in progress.  Used to
 *			synchronize competing switching instances and to tell
 *			wb stat updates to grab the i_pages lock.  See
 *			inode_switch_wbs_work_fn() for details.
 *
 * I_OVL_INUSE		Used by overlayfs to get exclusive ownership on upper
 *			and work dirs among overlayfs mounts.
 *
 * I_CREATING		New object's inode in the middle of setting up.
 *
 * Q: What is the difference between I_WILL_FREE and I_FREEING?
 */
#define I_DIRTY_SYNC		(1 << 0)
#define I_DIRTY_DATASYNC	(1 << 1)
#define I_DIRTY_PAGES		(1 << 2)
#define __I_NEW			3
#define I_NEW			(1 << __I_NEW)
#define I_WILL_FREE		(1 << 4)
#define I_FREEING		(1 << 5)
#define I_CLEAR			(1 << 6)
#define __I_SYNC		7
#define I_SYNC			(1 << __I_SYNC)
#define I_REFERENCED		(1 << 8)
#define __I_DIO_WAKEUP		9
#define I_DIO_WAKEUP		(1 << __I_DIO_WAKEUP)
#define I_LINKABLE		(1 << 10)
#define I_DIRTY_TIME		(1 << 11)
#define __I_DIRTY_TIME_EXPIRED	12
#define I_DIRTY_TIME_EXPIRED	(1 << __I_DIRTY_TIME_EXPIRED)
#define I_WB_SWITCH		(1 << 13)
#define I_OVL_INUSE		(1 << 14)
#define I_CREATING		(1 << 15)

#define I_DIRTY_INODE (I_DIRTY_SYNC | I_DIRTY_DATASYNC)
#define I_DIRTY (I_DIRTY_INODE | I_DIRTY_PAGES)
#define I_DIRTY_ALL (I_DIRTY | I_DIRTY_TIME)

extern void __mark_inode_dirty(struct inode *, int);
static inline void mark_inode_dirty(struct inode *inode)
{
	__mark_inode_dirty(inode, I_DIRTY);
}

static inline void mark_inode_dirty_sync(struct inode *inode)
{
	__mark_inode_dirty(inode, I_DIRTY_SYNC);
}

extern void inc_nlink(struct inode *inode);
extern void drop_nlink(struct inode *inode);
extern void clear_nlink(struct inode *inode);
extern void set_nlink(struct inode *inode, unsigned int nlink);

static inline void inode_inc_link_count(struct inode *inode)
{
	inc_nlink(inode);
	mark_inode_dirty(inode);
}

static inline void inode_dec_link_count(struct inode *inode)
{
	drop_nlink(inode);
	mark_inode_dirty(inode);
}

enum file_time_flags {
	S_ATIME = 1,
	S_MTIME = 2,
	S_CTIME = 4,
	S_VERSION = 8,
};

extern bool atime_needs_update(const struct path *, struct inode *);
extern void touch_atime(const struct path *);
static inline void file_accessed(struct file *file)
{
	if (!(file->f_flags & O_NOATIME))
		touch_atime(&file->f_path);
}

int sync_inode(struct inode *inode, struct writeback_control *wbc);
int sync_inode_metadata(struct inode *inode, int wait);

struct file_system_type {
	const char *name;
	int fs_flags;
#define FS_REQUIRES_DEV		1 
#define FS_BINARY_MOUNTDATA	2
#define FS_HAS_SUBTYPE		4
#define FS_USERNS_MOUNT		8	/* Can be mounted by userns root */
#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move() during rename() internally. */
	int (*init_fs_context)(struct fs_context *);
	const struct fs_parameter_description *parameters;
	struct dentry *(*mount) (struct file_system_type *, int,
		       const char *, void *);
	void (*kill_sb) (struct super_block *);
	struct module *owner;
	struct file_system_type * next;
	struct hlist_head fs_supers;

	struct lock_class_key s_lock_key;
	struct lock_class_key s_umount_key;
	struct lock_class_key s_vfs_rename_key;
	struct lock_class_key s_writers_key[SB_FREEZE_LEVELS];

	struct lock_class_key i_lock_key;
	struct lock_class_key i_mutex_key;
	struct lock_class_key i_mutex_dir_key;
};

#define MODULE_ALIAS_FS(NAME) MODULE_ALIAS("fs-" NAME)

extern struct dentry *mount_ns(struct file_system_type *fs_type,
	int flags, void *data, void *ns, struct user_namespace *user_ns,
	int (*fill_super)(struct super_block *, void *, int));
#ifdef CONFIG_BLOCK
extern struct dentry *mount_bdev(struct file_system_type *fs_type,
	int flags, const char *dev_name, void *data,
	int (*fill_super)(struct super_block *, void *, int));
#else
static inline struct dentry *mount_bdev(struct file_system_type *fs_type,
	int flags, const char *dev_name, void *data,
	int (*fill_super)(struct super_block *, void *, int))
{
	return ERR_PTR(-ENODEV);
}
#endif
extern struct dentry *mount_single(struct file_system_type *fs_type,
	int flags, void *data,
	int (*fill_super)(struct super_block *, void *, int));
extern struct dentry *mount_nodev(struct file_system_type *fs_type,
	int flags, void *data,
	int (*fill_super)(struct super_block *, void *, int));
extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
void generic_shutdown_super(struct super_block *sb);
#ifdef CONFIG_BLOCK
void kill_block_super(struct super_block *sb);
#else
static inline void kill_block_super(struct super_block *sb)
{
	BUG();
}
#endif
void kill_anon_super(struct super_block *sb);
void kill_litter_super(struct super_block *sb);
void deactivate_super(struct super_block *sb);
void deactivate_locked_super(struct super_block *sb);
int set_anon_super(struct super_block *s, void *data);
int set_anon_super_fc(struct super_block *s, struct fs_context *fc);
int get_anon_bdev(dev_t *);
void free_anon_bdev(dev_t);
struct super_block *sget_fc(struct fs_context *fc,
			    int (*test)(struct super_block *, struct fs_context *),
			    int (*set)(struct super_block *, struct fs_context *));
struct super_block *sget_userns(struct file_system_type *type,
			int (*test)(struct super_block *,void *),
			int (*set)(struct super_block *,void *),
			int flags, struct user_namespace *user_ns,
			void *data);
struct super_block *sget(struct file_system_type *type,
			int (*test)(struct super_block *,void *),
			int (*set)(struct super_block *,void *),
			int flags, void *data);
extern struct dentry *mount_pseudo_xattr(struct file_system_type *, char *,
					 const struct super_operations *ops,
					 const struct xattr_handler **xattr,
					 const struct dentry_operations *dops,
					 unsigned long);

static inline struct dentry *
mount_pseudo(struct file_system_type *fs_type, char *name,
	     const struct super_operations *ops,
	     const struct dentry_operations *dops, unsigned long magic)
{
	return mount_pseudo_xattr(fs_type, name, ops, NULL, dops, magic);
}

/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
#define fops_get(fops) \
	(((fops) && try_module_get((fops)->owner) ? (fops) : NULL))
#define fops_put(fops) \
	do { if (fops) module_put((fops)->owner); } while(0)
/*
 * This one is to be used *ONLY* from ->open() instances.
 * fops must be non-NULL, pinned down *and* module dependencies
 * should be sufficient to pin the caller down as well.
 */
#define replace_fops(f, fops) \
	do {	\
		struct file *__file = (f); \
		fops_put(__file->f_op); \
		BUG_ON(!(__file->f_op = (fops))); \
	} while(0)

extern int register_filesystem(struct file_system_type *);
extern int unregister_filesystem(struct file_system_type *);
extern struct vfsmount *kern_mount(struct file_system_type *);
extern void kern_unmount(struct vfsmount *mnt);
extern int may_umount_tree(struct vfsmount *);
extern int may_umount(struct vfsmount *);
extern long do_mount(const char *, const char __user *,
		     const char *, unsigned long, void *);
extern struct vfsmount *collect_mounts(const struct path *);
extern void drop_collected_mounts(struct vfsmount *);
extern int iterate_mounts(int (*)(struct vfsmount *, void *), void *,
			  struct vfsmount *);
extern int vfs_statfs(const struct path *, struct kstatfs *);
extern int user_statfs(const char __user *, struct kstatfs *);
extern int fd_statfs(int, struct kstatfs *);
extern int freeze_super(struct super_block *super);
extern int thaw_super(struct super_block *super);
extern bool our_mnt(struct vfsmount *mnt);
extern __printf(2, 3)
int super_setup_bdi_name(struct super_block *sb, char *fmt, ...);
extern int super_setup_bdi(struct super_block *sb);

extern int current_umask(void);

extern void ihold(struct inode * inode);
extern void iput(struct inode *);
extern int generic_update_time(struct inode *, struct timespec64 *, int);

/* /sys/fs */
extern struct kobject *fs_kobj;

#define MAX_RW_COUNT (INT_MAX & PAGE_MASK)

#ifdef CONFIG_MANDATORY_FILE_LOCKING
extern int locks_mandatory_locked(struct file *);
extern int locks_mandatory_area(struct inode *, struct file *, loff_t, loff_t, unsigned char);

/*
 * Candidates for mandatory locking have the setgid bit set
 * but no group execute bit -  an otherwise meaningless combination.
 */

static inline int __mandatory_lock(struct inode *ino)
{
	return (ino->i_mode & (S_ISGID | S_IXGRP)) == S_ISGID;
}

/*
 * ... and these candidates should be on SB_MANDLOCK mounted fs,
 * otherwise these will be advisory locks
 */

static inline int mandatory_lock(struct inode *ino)
{
	return IS_MANDLOCK(ino) && __mandatory_lock(ino);
}

static inline int locks_verify_locked(struct file *file)
{
	if (mandatory_lock(locks_inode(file)))
		return locks_mandatory_locked(file);
	return 0;
}

static inline int locks_verify_truncate(struct inode *inode,
				    struct file *f,
				    loff_t size)
{
	if (!inode->i_flctx || !mandatory_lock(inode))
		return 0;

	if (size < inode->i_size) {
		return locks_mandatory_area(inode, f, size, inode->i_size - 1,
				F_WRLCK);
	} else {
		return locks_mandatory_area(inode, f, inode->i_size, size - 1,
				F_WRLCK);
	}
}

#else /* !CONFIG_MANDATORY_FILE_LOCKING */

static inline int locks_mandatory_locked(struct file *file)
{
	return 0;
}

static inline int locks_mandatory_area(struct inode *inode, struct file *filp,
                                       loff_t start, loff_t end, unsigned char type)
{
	return 0;
}

static inline int __mandatory_lock(struct inode *inode)
{
	return 0;
}

static inline int mandatory_lock(struct inode *inode)
{
	return 0;
}

static inline int locks_verify_locked(struct file *file)
{
	return 0;
}

static inline int locks_verify_truncate(struct inode *inode, struct file *filp,
					size_t size)
{
	return 0;
}

#endif /* CONFIG_MANDATORY_FILE_LOCKING */


#ifdef CONFIG_FILE_LOCKING
static inline int break_lease(struct inode *inode, unsigned int mode)
{
	/*
	 * Since this check is lockless, we must ensure that any refcounts
	 * taken are done before checking i_flctx->flc_lease. Otherwise, we
	 * could end up racing with tasks trying to set a new lease on this
	 * file.
	 */
	smp_mb();
	if (inode->i_flctx && !list_empty_careful(&inode->i_flctx->flc_lease))
		return __break_lease(inode, mode, FL_LEASE);
	return 0;
}

static inline int break_deleg(struct inode *inode, unsigned int mode)
{
	/*
	 * Since this check is lockless, we must ensure that any refcounts
	 * taken are done before checking i_flctx->flc_lease. Otherwise, we
	 * could end up racing with tasks trying to set a new lease on this
	 * file.
	 */
	smp_mb();
	if (inode->i_flctx && !list_empty_careful(&inode->i_flctx->flc_lease))
		return __break_lease(inode, mode, FL_DELEG);
	return 0;
}

static inline int try_break_deleg(struct inode *inode, struct inode **delegated_inode)
{
	int ret;

	ret = break_deleg(inode, O_WRONLY|O_NONBLOCK);
	if (ret == -EWOULDBLOCK && delegated_inode) {
		*delegated_inode = inode;
		ihold(inode);
	}
	return ret;
}

static inline int break_deleg_wait(struct inode **delegated_inode)
{
	int ret;

	ret = break_deleg(*delegated_inode, O_WRONLY);
	iput(*delegated_inode);
	*delegated_inode = NULL;
	return ret;
}

static inline int break_layout(struct inode *inode, bool wait)
{
	smp_mb();
	if (inode->i_flctx && !list_empty_careful(&inode->i_flctx->flc_lease))
		return __break_lease(inode,
				wait ? O_WRONLY : O_WRONLY | O_NONBLOCK,
				FL_LAYOUT);
	return 0;
}

#else /* !CONFIG_FILE_LOCKING */
static inline int break_lease(struct inode *inode, unsigned int mode)
{
	return 0;
}

static inline int break_deleg(struct inode *inode, unsigned int mode)
{
	return 0;
}

static inline int try_break_deleg(struct inode *inode, struct inode **delegated_inode)
{
	return 0;
}

static inline int break_deleg_wait(struct inode **delegated_inode)
{
	BUG();
	return 0;
}

static inline int break_layout(struct inode *inode, bool wait)
{
	return 0;
}

#endif /* CONFIG_FILE_LOCKING */

/* fs/open.c */
struct audit_names;
struct filename {
	const char		*name;	/* pointer to actual string */
	const __user char	*uptr;	/* original userland pointer */
	int			refcnt;
	struct audit_names	*aname;
	const char		iname[];
};
static_assert(offsetof(struct filename, iname) % sizeof(long) == 0);

extern long vfs_truncate(const struct path *, loff_t);
extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs,
		       struct file *filp);
extern int vfs_fallocate(struct file *file, int mode, loff_t offset,
			loff_t len);
extern long do_sys_open(int dfd, const char __user *filename, int flags,
			umode_t mode);
extern struct file *file_open_name(struct filename *, int, umode_t);
extern struct file *filp_open(const char *, int, umode_t);
extern struct file *file_open_root(struct dentry *, struct vfsmount *,
				   const char *, int, umode_t);
extern struct file * dentry_open(const struct path *, int, const struct cred *);
extern struct file * open_with_fake_path(const struct path *, int,
					 struct inode*, const struct cred *);
static inline struct file *file_clone_open(struct file *file)
{
	return dentry_open(&file->f_path, file->f_flags, file->f_cred);
}
extern int filp_close(struct file *, fl_owner_t id);

extern struct filename *getname_flags(const char __user *, int, int *);
extern struct filename *getname(const char __user *);
extern struct filename *getname_kernel(const char *);
extern void putname(struct filename *name);

extern int finish_open(struct file *file, struct dentry *dentry,
			int (*open)(struct inode *, struct file *));
extern int finish_no_open(struct file *file, struct dentry *dentry);

/* fs/ioctl.c */

extern int ioctl_preallocate(struct file *filp, void __user *argp);

/* fs/dcache.c */
extern void __init vfs_caches_init_early(void);
extern void __init vfs_caches_init(void);

extern struct kmem_cache *names_cachep;

#define __getname()		kmem_cache_alloc(names_cachep, GFP_KERNEL)
#define __putname(name)		kmem_cache_free(names_cachep, (void *)(name))

#ifdef CONFIG_BLOCK
extern int register_blkdev(unsigned int, const char *);
extern void unregister_blkdev(unsigned int, const char *);
extern void bdev_unhash_inode(dev_t dev);
extern struct block_device *bdget(dev_t);
extern struct block_device *bdgrab(struct block_device *bdev);
extern void bd_set_size(struct block_device *, loff_t size);
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
extern void invalidate_bdev(struct block_device *);
extern void iterate_bdevs(void (*)(struct block_device *, void *), void *);
extern int sync_blockdev(struct block_device *bdev);
extern void kill_bdev(struct block_device *);
extern struct super_block *freeze_bdev(struct block_device *);
extern void emergency_thaw_all(void);
extern void emergency_thaw_bdev(struct super_block *sb);
extern int thaw_bdev(struct block_device *bdev, struct super_block *sb);
extern int fsync_bdev(struct block_device *);

extern struct super_block *blockdev_superblock;

static inline bool sb_is_blkdev_sb(struct super_block *sb)
{
	return sb == blockdev_superblock;
}
#else
static inline void bd_forget(struct inode *inode) {}
static inline int sync_blockdev(struct block_device *bdev) { return 0; }
static inline void kill_bdev(struct block_device *bdev) {}
static inline void invalidate_bdev(struct block_device *bdev) {}

static inline struct super_block *freeze_bdev(struct block_device *sb)
{
	return NULL;
}

static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb)
{
	return 0;
}

static inline int emergency_thaw_bdev(struct super_block *sb)
{
	return 0;
}

static inline void iterate_bdevs(void (*f)(struct block_device *, void *), void *arg)
{
}

static inline bool sb_is_blkdev_sb(struct super_block *sb)
{
	return false;
}
#endif
extern int sync_filesystem(struct super_block *);
extern const struct file_operations def_blk_fops;
extern const struct file_operations def_chr_fops;
#ifdef CONFIG_BLOCK
extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long);
extern int blkdev_ioctl(struct block_device *, fmode_t, unsigned, unsigned long);
extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long);
extern int blkdev_get(struct block_device *bdev, fmode_t mode, void *holder);
extern struct block_device *blkdev_get_by_path(const char *path, fmode_t mode,
					       void *holder);
extern struct block_device *blkdev_get_by_dev(dev_t dev, fmode_t mode,
					      void *holder);
extern void blkdev_put(struct block_device *bdev, fmode_t mode);
extern int __blkdev_reread_part(struct block_device *bdev);
extern int blkdev_reread_part(struct block_device *bdev);

#ifdef CONFIG_SYSFS
extern int bd_link_disk_holder(struct block_device *bdev, struct gendisk *disk);
extern void bd_unlink_disk_holder(struct block_device *bdev,
				  struct gendisk *disk);
#else
static inline int bd_link_disk_holder(struct block_device *bdev,
				      struct gendisk *disk)
{
	return 0;
}
static inline void bd_unlink_disk_holder(struct block_device *bdev,
					 struct gendisk *disk)
{
}
#endif
#endif

/* fs/char_dev.c */
#define CHRDEV_MAJOR_MAX 512
/* Marks the bottom of the first segment of free char majors */
#define CHRDEV_MAJOR_DYN_END 234
/* Marks the top and bottom of the second segment of free char majors */
#define CHRDEV_MAJOR_DYN_EXT_START 511
#define CHRDEV_MAJOR_DYN_EXT_END 384

extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
extern int register_chrdev_region(dev_t, unsigned, const char *);
extern int __register_chrdev(unsigned int major, unsigned int baseminor,
			     unsigned int count, const char *name,
			     const struct file_operations *fops);
extern void __unregister_chrdev(unsigned int major, unsigned int baseminor,
				unsigned int count, const char *name);
extern void unregister_chrdev_region(dev_t, unsigned);
extern void chrdev_show(struct seq_file *,off_t);

static inline int register_chrdev(unsigned int major, const char *name,
				  const struct file_operations *fops)
{
	return __register_chrdev(major, 0, 256, name, fops);
}

static inline void unregister_chrdev(unsigned int major, const char *name)
{
	__unregister_chrdev(major, 0, 256, name);
}

/* fs/block_dev.c */
#define BDEVNAME_SIZE	32	/* Largest string for a blockdev identifier */
#define BDEVT_SIZE	10	/* Largest string for MAJ:MIN for blkdev */

#ifdef CONFIG_BLOCK
#define BLKDEV_MAJOR_MAX	512
extern const char *__bdevname(dev_t, char *buffer);
extern const char *bdevname(struct block_device *bdev, char *buffer);
extern struct block_device *lookup_bdev(const char *);
extern void blkdev_show(struct seq_file *,off_t);

#else
#define BLKDEV_MAJOR_MAX	0
#endif

extern void init_special_inode(struct inode *, umode_t, dev_t);

/* Invalid inode operations -- fs/bad_inode.c */
extern void make_bad_inode(struct inode *);
extern bool is_bad_inode(struct inode *);

#ifdef CONFIG_BLOCK
extern void check_disk_size_change(struct gendisk *disk,
		struct block_device *bdev, bool verbose);
extern int revalidate_disk(struct gendisk *);
extern int check_disk_change(struct block_device *);
extern int __invalidate_device(struct block_device *, bool);
extern int invalidate_partition(struct gendisk *, int);
#endif
unsigned long invalidate_mapping_pages(struct address_space *mapping,
					pgoff_t start, pgoff_t end);

static inline void invalidate_remote_inode(struct inode *inode)
{
	if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
	    S_ISLNK(inode->i_mode))
		invalidate_mapping_pages(inode->i_mapping, 0, -1);
}
extern int invalidate_inode_pages2(struct address_space *mapping);
extern int invalidate_inode_pages2_range(struct address_space *mapping,
					 pgoff_t start, pgoff_t end);
extern int write_inode_now(struct inode *, int);
extern int filemap_fdatawrite(struct address_space *);
extern int filemap_flush(struct address_space *);
extern int filemap_fdatawait_keep_errors(struct address_space *mapping);
extern int filemap_fdatawait_range(struct address_space *, loff_t lstart,
				   loff_t lend);

static inline int filemap_fdatawait(struct address_space *mapping)
{
	return filemap_fdatawait_range(mapping, 0, LLONG_MAX);
}

extern bool filemap_range_has_page(struct address_space *, loff_t lstart,
				  loff_t lend);
extern int filemap_write_and_wait(struct address_space *mapping);
extern int filemap_write_and_wait_range(struct address_space *mapping,
				        loff_t lstart, loff_t lend);
extern int __filemap_fdatawrite_range(struct address_space *mapping,
				loff_t start, loff_t end, int sync_mode);
extern int filemap_fdatawrite_range(struct address_space *mapping,
				loff_t start, loff_t end);
extern int filemap_check_errors(struct address_space *mapping);
extern void __filemap_set_wb_err(struct address_space *mapping, int err);

extern int __must_check file_fdatawait_range(struct file *file, loff_t lstart,
						loff_t lend);
extern int __must_check file_check_and_advance_wb_err(struct file *file);
extern int __must_check file_write_and_wait_range(struct file *file,
						loff_t start, loff_t end);

static inline int file_write_and_wait(struct file *file)
{
	return file_write_and_wait_range(file, 0, LLONG_MAX);
}

/**
 * filemap_set_wb_err - set a writeback error on an address_space
 * @mapping: mapping in which to set writeback error
 * @err: error to be set in mapping
 *
 * When writeback fails in some way, we must record that error so that
 * userspace can be informed when fsync and the like are called.  We endeavor
 * to report errors on any file that was open at the time of the error.  Some
 * internal callers also need to know when writeback errors have occurred.
 *
 * When a writeback error occurs, most filesystems will want to call
 * filemap_set_wb_err to record the error in the mapping so that it will be
 * automatically reported whenever fsync is called on the file.
 */
static inline void filemap_set_wb_err(struct address_space *mapping, int err)
{
	/* Fastpath for common case of no error */
	if (unlikely(err))
		__filemap_set_wb_err(mapping, err);
}

/**
 * filemap_check_wb_error - has an error occurred since the mark was sampled?
 * @mapping: mapping to check for writeback errors
 * @since: previously-sampled errseq_t
 *
 * Grab the errseq_t value from the mapping, and see if it has changed "since"
 * the given value was sampled.
 *
 * If it has then report the latest error set, otherwise return 0.
 */
static inline int filemap_check_wb_err(struct address_space *mapping,
					errseq_t since)
{
	return errseq_check(&mapping->wb_err, since);
}

/**
 * filemap_sample_wb_err - sample the current errseq_t to test for later errors
 * @mapping: mapping to be sampled
 *
 * Writeback errors are always reported relative to a particular sample point
 * in the past. This function provides those sample points.
 */
static inline errseq_t filemap_sample_wb_err(struct address_space *mapping)
{
	return errseq_sample(&mapping->wb_err);
}

extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
			   int datasync);
extern int vfs_fsync(struct file *file, int datasync);

extern int sync_file_range(struct file *file, loff_t offset, loff_t nbytes,
				unsigned int flags);

/*
 * Sync the bytes written if this was a synchronous write.  Expect ki_pos
 * to already be updated for the write, and will return either the amount
 * of bytes passed in, or an error if syncing the file failed.
 */
static inline ssize_t generic_write_sync(struct kiocb *iocb, ssize_t count)
{
	if (iocb->ki_flags & IOCB_DSYNC) {
		int ret = vfs_fsync_range(iocb->ki_filp,
				iocb->ki_pos - count, iocb->ki_pos - 1,
				(iocb->ki_flags & IOCB_SYNC) ? 0 : 1);
		if (ret)
			return ret;
	}

	return count;
}

extern void emergency_sync(void);
extern void emergency_remount(void);
#ifdef CONFIG_BLOCK
extern sector_t bmap(struct inode *, sector_t);
#endif
extern int notify_change(struct dentry *, struct iattr *, struct inode **);
extern int inode_permission(struct inode *, int);
extern int generic_permission(struct inode *, int);
extern int __check_sticky(struct inode *dir, struct inode *inode);

static inline bool execute_ok(struct inode *inode)
{
	return (inode->i_mode & S_IXUGO) || S_ISDIR(inode->i_mode);
}

static inline void file_start_write(struct file *file)
{
	if (!S_ISREG(file_inode(file)->i_mode))
		return;
	__sb_start_write(file_inode(file)->i_sb, SB_FREEZE_WRITE, true);
}

static inline bool file_start_write_trylock(struct file *file)
{
	if (!S_ISREG(file_inode(file)->i_mode))
		return true;
	return __sb_start_write(file_inode(file)->i_sb, SB_FREEZE_WRITE, false);
}

static inline void file_end_write(struct file *file)
{
	if (!S_ISREG(file_inode(file)->i_mode))
		return;
	__sb_end_write(file_inode(file)->i_sb, SB_FREEZE_WRITE);
}

/*
 * get_write_access() gets write permission for a file.
 * put_write_access() releases this write permission.
 * This is used for regular files.
 * We cannot support write (and maybe mmap read-write shared) accesses and
 * MAP_DENYWRITE mmappings simultaneously. The i_writecount field of an inode
 * can have the following values:
 * 0: no writers, no VM_DENYWRITE mappings
 * < 0: (-i_writecount) vm_area_structs with VM_DENYWRITE set exist
 * > 0: (i_writecount) users are writing to the file.
 *
 * Normally we operate on that counter with atomic_{inc,dec} and it's safe
 * except for the cases where we don't hold i_writecount yet. Then we need to
 * use {get,deny}_write_access() - these functions check the sign and refuse
 * to do the change if sign is wrong.
 */
static inline int get_write_access(struct inode *inode)
{
	return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
}
static inline int deny_write_access(struct file *file)
{
	struct inode *inode = file_inode(file);
	return atomic_dec_unless_positive(&inode->i_writecount) ? 0 : -ETXTBSY;
}
static inline void put_write_access(struct inode * inode)
{
	atomic_dec(&inode->i_writecount);
}
static inline void allow_write_access(struct file *file)
{
	if (file)
		atomic_inc(&file_inode(file)->i_writecount);
}
static inline bool inode_is_open_for_write(const struct inode *inode)
{
	return atomic_read(&inode->i_writecount) > 0;
}

#ifdef CONFIG_IMA
static inline void i_readcount_dec(struct inode *inode)
{
	BUG_ON(!atomic_read(&inode->i_readcount));
	atomic_dec(&inode->i_readcount);
}
static inline void i_readcount_inc(struct inode *inode)
{
	atomic_inc(&inode->i_readcount);
}
#else
static inline void i_readcount_dec(struct inode *inode)
{
	return;
}
static inline void i_readcount_inc(struct inode *inode)
{
	return;
}
#endif
extern int do_pipe_flags(int *, int);

#define __kernel_read_file_id(id) \
	id(UNKNOWN, unknown)		\
	id(FIRMWARE, firmware)		\
	id(FIRMWARE_PREALLOC_BUFFER, firmware)	\
	id(MODULE, kernel-module)		\
	id(KEXEC_IMAGE, kexec-image)		\
	id(KEXEC_INITRAMFS, kexec-initramfs)	\
	id(POLICY, security-policy)		\
	id(X509_CERTIFICATE, x509-certificate)	\
	id(MAX_ID, )

#define __fid_enumify(ENUM, dummy) READING_ ## ENUM,
#define __fid_stringify(dummy, str) #str,

enum kernel_read_file_id {
	__kernel_read_file_id(__fid_enumify)
};

static const char * const kernel_read_file_str[] = {
	__kernel_read_file_id(__fid_stringify)
};

static inline const char *kernel_read_file_id_str(enum kernel_read_file_id id)
{
	if ((unsigned)id >= READING_MAX_ID)
		return kernel_read_file_str[READING_UNKNOWN];

	return kernel_read_file_str[id];
}

extern int kernel_read_file(struct file *, void **, loff_t *, loff_t,
			    enum kernel_read_file_id);
extern int kernel_read_file_from_path(const char *, void **, loff_t *, loff_t,
				      enum kernel_read_file_id);
extern int kernel_read_file_from_fd(int, void **, loff_t *, loff_t,
				    enum kernel_read_file_id);
extern ssize_t kernel_read(struct file *, void *, size_t, loff_t *);
extern ssize_t kernel_write(struct file *, const void *, size_t, loff_t *);
extern ssize_t __kernel_write(struct file *, const void *, size_t, loff_t *);
extern struct file * open_exec(const char *);
 
/* fs/dcache.c -- generic fs support functions */
extern bool is_subdir(struct dentry *, struct dentry *);
extern bool path_is_under(const struct path *, const struct path *);

extern char *file_path(struct file *, char *, int);

#include <linux/err.h>

/* needed for stackable file system support */
extern loff_t default_llseek(struct file *file, loff_t offset, int whence);

extern loff_t vfs_llseek(struct file *file, loff_t offset, int whence);

extern int inode_init_always(struct super_block *, struct inode *);
extern void inode_init_once(struct inode *);
extern void address_space_init_once(struct address_space *mapping);
extern struct inode * igrab(struct inode *);
extern ino_t iunique(struct super_block *, ino_t);
extern int inode_needs_sync(struct inode *inode);
extern int generic_delete_inode(struct inode *inode);
static inline int generic_drop_inode(struct inode *inode)
{
	return !inode->i_nlink || inode_unhashed(inode);
}

extern struct inode *ilookup5_nowait(struct super_block *sb,
		unsigned long hashval, int (*test)(struct inode *, void *),
		void *data);
extern struct inode *ilookup5(struct super_block *sb, unsigned long hashval,
		int (*test)(struct inode *, void *), void *data);
extern struct inode *ilookup(struct super_block *sb, unsigned long ino);

extern struct inode *inode_insert5(struct inode *inode, unsigned long hashval,
		int (*test)(struct inode *, void *),
		int (*set)(struct inode *, void *),
		void *data);
extern struct inode * iget5_locked(struct super_block *, unsigned long, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *);
extern struct inode * iget_locked(struct super_block *, unsigned long);
extern struct inode *find_inode_nowait(struct super_block *,
				       unsigned long,
				       int (*match)(struct inode *,
						    unsigned long, void *),
				       void *data);
extern int insert_inode_locked4(struct inode *, unsigned long, int (*test)(struct inode *, void *), void *);
extern int insert_inode_locked(struct inode *);
#ifdef CONFIG_DEBUG_LOCK_ALLOC
extern void lockdep_annotate_inode_mutex_key(struct inode *inode);
#else
static inline void lockdep_annotate_inode_mutex_key(struct inode *inode) { };
#endif
extern void unlock_new_inode(struct inode *);
extern void discard_new_inode(struct inode *);
extern unsigned int get_next_ino(void);
extern void evict_inodes(struct super_block *sb);

extern void __iget(struct inode * inode);
extern void iget_failed(struct inode *);
extern void clear_inode(struct inode *);
extern void __destroy_inode(struct inode *);
extern struct inode *new_inode_pseudo(struct super_block *sb);
extern struct inode *new_inode(struct super_block *sb);
extern void free_inode_nonrcu(struct inode *inode);
extern int should_remove_suid(struct dentry *);
extern int file_remove_privs(struct file *);

extern void __insert_inode_hash(struct inode *, unsigned long hashval);
static inline void insert_inode_hash(struct inode *inode)
{
	__insert_inode_hash(inode, inode->i_ino);
}

extern void __remove_inode_hash(struct inode *);
static inline void remove_inode_hash(struct inode *inode)
{
	if (!inode_unhashed(inode) && !hlist_fake(&inode->i_hash))
		__remove_inode_hash(inode);
}

extern void inode_sb_list_add(struct inode *inode);

#ifdef CONFIG_BLOCK
extern int bdev_read_only(struct block_device *);
#endif
extern int set_blocksize(struct block_device *, int);
extern int sb_set_blocksize(struct super_block *, int);
extern int sb_min_blocksize(struct super_block *, int);

extern int generic_file_mmap(struct file *, struct vm_area_struct *);
extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
extern ssize_t generic_write_checks(struct kiocb *, struct iov_iter *);
extern int generic_remap_checks(struct file *file_in, loff_t pos_in,
				struct file *file_out, loff_t pos_out,
				loff_t *count, unsigned int remap_flags);
extern ssize_t generic_file_read_iter(struct kiocb *, struct iov_iter *);
extern ssize_t __generic_file_write_iter(struct kiocb *, struct iov_iter *);
extern ssize_t generic_file_write_iter(struct kiocb *, struct iov_iter *);
extern ssize_t generic_file_direct_write(struct kiocb *, struct iov_iter *);
extern ssize_t generic_perform_write(struct file *, struct iov_iter *, loff_t);

ssize_t vfs_iter_read(struct file *file, struct iov_iter *iter, loff_t *ppos,
		rwf_t flags);
ssize_t vfs_iter_write(struct file *file, struct iov_iter *iter, loff_t *ppos,
		rwf_t flags);

/* fs/block_dev.c */
extern ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to);
extern ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from);
extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
			int datasync);
extern void block_sync_page(struct page *page);

/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
		struct pipe_inode_info *, size_t, unsigned int);
extern ssize_t iter_file_splice_write(struct pipe_inode_info *,
		struct file *, loff_t *, size_t, unsigned int);
extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
		struct file *out, loff_t *, size_t len, unsigned int flags);
extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
		loff_t *opos, size_t len, unsigned int flags);


extern void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
extern loff_t noop_llseek(struct file *file, loff_t offset, int whence);
extern loff_t no_llseek(struct file *file, loff_t offset, int whence);
extern loff_t vfs_setpos(struct file *file, loff_t offset, loff_t maxsize);
extern loff_t generic_file_llseek(struct file *file, loff_t offset, int whence);
extern loff_t generic_file_llseek_size(struct file *file, loff_t offset,
		int whence, loff_t maxsize, loff_t eof);
extern loff_t fixed_size_llseek(struct file *file, loff_t offset,
		int whence, loff_t size);
extern loff_t no_seek_end_llseek_size(struct file *, loff_t, int, loff_t);
extern loff_t no_seek_end_llseek(struct file *, loff_t, int);
extern int generic_file_open(struct inode * inode, struct file * filp);
extern int nonseekable_open(struct inode * inode, struct file * filp);
extern int stream_open(struct inode * inode, struct file * filp);

#ifdef CONFIG_BLOCK
typedef void (dio_submit_t)(struct bio *bio, struct inode *inode,
			    loff_t file_offset);

enum {
	/* need locking between buffered and direct access */
	DIO_LOCKING	= 0x01,

	/* filesystem does not support filling holes */
	DIO_SKIP_HOLES	= 0x02,
};

void dio_end_io(struct bio *bio);
void dio_warn_stale_pagecache(struct file *filp);

ssize_t __blockdev_direct_IO(struct kiocb *iocb, struct inode *inode,
			     struct block_device *bdev, struct iov_iter *iter,
			     get_block_t get_block,
			     dio_iodone_t end_io, dio_submit_t submit_io,
			     int flags);

static inline ssize_t blockdev_direct_IO(struct kiocb *iocb,
					 struct inode *inode,
					 struct iov_iter *iter,
					 get_block_t get_block)
{
	return __blockdev_direct_IO(iocb, inode, inode->i_sb->s_bdev, iter,
			get_block, NULL, NULL, DIO_LOCKING | DIO_SKIP_HOLES);
}
#endif

void inode_dio_wait(struct inode *inode);

/*
 * inode_dio_begin - signal start of a direct I/O requests
 * @inode: inode the direct I/O happens on
 *
 * This is called once we've finished processing a direct I/O request,
 * and is used to wake up callers waiting for direct I/O to be quiesced.
 */
static inline void inode_dio_begin(struct inode *inode)
{
	atomic_inc(&inode->i_dio_count);
}

/*
 * inode_dio_end - signal finish of a direct I/O requests
 * @inode: inode the direct I/O happens on
 *
 * This is called once we've finished processing a direct I/O request,
 * and is used to wake up callers waiting for direct I/O to be quiesced.
 */
static inline void inode_dio_end(struct inode *inode)
{
	if (atomic_dec_and_test(&inode->i_dio_count))
		wake_up_bit(&inode->i_state, __I_DIO_WAKEUP);
}

extern void inode_set_flags(struct inode *inode, unsigned int flags,
			    unsigned int mask);

extern const struct file_operations generic_ro_fops;

#define special_file(m) (S_ISCHR(m)||S_ISBLK(m)||S_ISFIFO(m)||S_ISSOCK(m))

extern int readlink_copy(char __user *, int, const char *);
extern int page_readlink(struct dentry *, char __user *, int);
extern const char *page_get_link(struct dentry *, struct inode *,
				 struct delayed_call *);
extern void page_put_link(void *);
extern int __page_symlink(struct inode *inode, const char *symname, int len,
		int nofs);
extern int page_symlink(struct inode *inode, const char *symname, int len);
extern const struct inode_operations page_symlink_inode_operations;
extern void kfree_link(void *);
extern void generic_fillattr(struct inode *, struct kstat *);
extern int vfs_getattr_nosec(const struct path *, struct kstat *, u32, unsigned int);
extern int vfs_getattr(const struct path *, struct kstat *, u32, unsigned int);
void __inode_add_bytes(struct inode *inode, loff_t bytes);
void inode_add_bytes(struct inode *inode, loff_t bytes);
void __inode_sub_bytes(struct inode *inode, loff_t bytes);
void inode_sub_bytes(struct inode *inode, loff_t bytes);
static inline loff_t __inode_get_bytes(struct inode *inode)
{
	return (((loff_t)inode->i_blocks) << 9) + inode->i_bytes;
}
loff_t inode_get_bytes(struct inode *inode);
void inode_set_bytes(struct inode *inode, loff_t bytes);
const char *simple_get_link(struct dentry *, struct inode *,
			    struct delayed_call *);
extern const struct inode_operations simple_symlink_inode_operations;

extern int iterate_dir(struct file *, struct dir_context *);

extern int vfs_statx(int, const char __user *, int, struct kstat *, u32);
extern int vfs_statx_fd(unsigned int, struct kstat *, u32, unsigned int);

static inline int vfs_stat(const char __user *filename, struct kstat *stat)
{
	return vfs_statx(AT_FDCWD, filename, AT_NO_AUTOMOUNT,
			 stat, STATX_BASIC_STATS);
}
static inline int vfs_lstat(const char __user *name, struct kstat *stat)
{
	return vfs_statx(AT_FDCWD, name, AT_SYMLINK_NOFOLLOW | AT_NO_AUTOMOUNT,
			 stat, STATX_BASIC_STATS);
}
static inline int vfs_fstatat(int dfd, const char __user *filename,
			      struct kstat *stat, int flags)
{
	return vfs_statx(dfd, filename, flags | AT_NO_AUTOMOUNT,
			 stat, STATX_BASIC_STATS);
}
static inline int vfs_fstat(int fd, struct kstat *stat)
{
	return vfs_statx_fd(fd, stat, STATX_BASIC_STATS, 0);
}


extern const char *vfs_get_link(struct dentry *, struct delayed_call *);
extern int vfs_readlink(struct dentry *, char __user *, int);

extern int __generic_block_fiemap(struct inode *inode,
				  struct fiemap_extent_info *fieinfo,
				  loff_t start, loff_t len,
				  get_block_t *get_block);
extern int generic_block_fiemap(struct inode *inode,
				struct fiemap_extent_info *fieinfo, u64 start,
				u64 len, get_block_t *get_block);

extern struct file_system_type *get_filesystem(struct file_system_type *fs);
extern void put_filesystem(struct file_system_type *fs);
extern struct file_system_type *get_fs_type(const char *name);
extern struct super_block *get_super(struct block_device *);
extern struct super_block *get_super_thawed(struct block_device *);
extern struct super_block *get_super_exclusive_thawed(struct block_device *bdev);
extern struct super_block *get_active_super(struct block_device *bdev);
extern void drop_super(struct super_block *sb);
extern void drop_super_exclusive(struct super_block *sb);
extern void iterate_supers(void (*)(struct super_block *, void *), void *);
extern void iterate_supers_type(struct file_system_type *,
			        void (*)(struct super_block *, void *), void *);

extern int dcache_dir_open(struct inode *, struct file *);
extern int dcache_dir_close(struct inode *, struct file *);
extern loff_t dcache_dir_lseek(struct file *, loff_t, int);
extern int dcache_readdir(struct file *, struct dir_context *);
extern int simple_setattr(struct dentry *, struct iattr *);
extern int simple_getattr(const struct path *, struct kstat *, u32, unsigned int);
extern int simple_statfs(struct dentry *, struct kstatfs *);
extern int simple_open(struct inode *inode, struct file *file);
extern int simple_link(struct dentry *, struct inode *, struct dentry *);
extern int simple_unlink(struct inode *, struct dentry *);
extern int simple_rmdir(struct inode *, struct dentry *);
extern int simple_rename(struct inode *, struct dentry *,
			 struct inode *, struct dentry *, unsigned int);
extern int noop_fsync(struct file *, loff_t, loff_t, int);
extern int noop_set_page_dirty(struct page *page);
extern void noop_invalidatepage(struct page *page, unsigned int offset,
		unsigned int length);
extern ssize_t noop_direct_IO(struct kiocb *iocb, struct iov_iter *iter);
extern int simple_empty(struct dentry *);
extern int simple_readpage(struct file *file, struct page *page);
extern int simple_write_begin(struct file *file, struct address_space *mapping,
			loff_t pos, unsigned len, unsigned flags,
			struct page **pagep, void **fsdata);
extern int simple_write_end(struct file *file, struct address_space *mapping,
			loff_t pos, unsigned len, unsigned copied,
			struct page *page, void *fsdata);
extern int always_delete_dentry(const struct dentry *);
extern struct inode *alloc_anon_inode(struct super_block *);
extern int simple_nosetlease(struct file *, long, struct file_lock **, void **);
extern const struct dentry_operations simple_dentry_operations;

extern struct dentry *simple_lookup(struct inode *, struct dentry *, unsigned int flags);
extern ssize_t generic_read_dir(struct file *, char __user *, size_t, loff_t *);
extern const struct file_operations simple_dir_operations;
extern const struct inode_operations simple_dir_inode_operations;
extern void make_empty_dir_inode(struct inode *inode);
extern bool is_empty_dir_inode(struct inode *inode);
struct tree_descr { const char *name; const struct file_operations *ops; int mode; };
struct dentry *d_alloc_name(struct dentry *, const char *);
extern int simple_fill_super(struct super_block *, unsigned long,
			     const struct tree_descr *);
extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
extern void simple_release_fs(struct vfsmount **mount, int *count);

extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
			loff_t *ppos, const void *from, size_t available);
extern ssize_t simple_write_to_buffer(void *to, size_t available, loff_t *ppos,
		const void __user *from, size_t count);

extern int __generic_file_fsync(struct file *, loff_t, loff_t, int);
extern int generic_file_fsync(struct file *, loff_t, loff_t, int);

extern int generic_check_addressable(unsigned, u64);

#ifdef CONFIG_MIGRATION
extern int buffer_migrate_page(struct address_space *,
				struct page *, struct page *,
				enum migrate_mode);
extern int buffer_migrate_page_norefs(struct address_space *,
				struct page *, struct page *,
				enum migrate_mode);
#else
#define buffer_migrate_page NULL
#define buffer_migrate_page_norefs NULL
#endif

extern int setattr_prepare(struct dentry *, struct iattr *);
extern int inode_newsize_ok(const struct inode *, loff_t offset);
extern void setattr_copy(struct inode *inode, const struct iattr *attr);

extern int file_update_time(struct file *file);

static inline bool io_is_direct(struct file *filp)
{
	return (filp->f_flags & O_DIRECT) || IS_DAX(filp->f_mapping->host);
}

static inline bool vma_is_dax(struct vm_area_struct *vma)
{
	return vma->vm_file && IS_DAX(vma->vm_file->f_mapping->host);
}

static inline bool vma_is_fsdax(struct vm_area_struct *vma)
{
	struct inode *inode;

	if (!vma->vm_file)
		return false;
	if (!vma_is_dax(vma))
		return false;
	inode = file_inode(vma->vm_file);
	if (S_ISCHR(inode->i_mode))
		return false; /* device-dax */
	return true;
}

static inline int iocb_flags(struct file *file)
{
	int res = 0;
	if (file->f_flags & O_APPEND)
		res |= IOCB_APPEND;
	if (io_is_direct(file))
		res |= IOCB_DIRECT;
	if ((file->f_flags & O_DSYNC) || IS_SYNC(file->f_mapping->host))
		res |= IOCB_DSYNC;
	if (file->f_flags & __O_SYNC)
		res |= IOCB_SYNC;
	return res;
}

static inline int kiocb_set_rw_flags(struct kiocb *ki, rwf_t flags)
{
	if (unlikely(flags & ~RWF_SUPPORTED))
		return -EOPNOTSUPP;

	if (flags & RWF_NOWAIT) {
		if (!(ki->ki_filp->f_mode & FMODE_NOWAIT))
			return -EOPNOTSUPP;
		ki->ki_flags |= IOCB_NOWAIT;
	}
	if (flags & RWF_HIPRI)
		ki->ki_flags |= IOCB_HIPRI;
	if (flags & RWF_DSYNC)
		ki->ki_flags |= IOCB_DSYNC;
	if (flags & RWF_SYNC)
		ki->ki_flags |= (IOCB_DSYNC | IOCB_SYNC);
	if (flags & RWF_APPEND)
		ki->ki_flags |= IOCB_APPEND;
	return 0;
}

static inline ino_t parent_ino(struct dentry *dentry)
{
	ino_t res;

	/*
	 * Don't strictly need d_lock here? If the parent ino could change
	 * then surely we'd have a deeper race in the caller?
	 */
	spin_lock(&dentry->d_lock);
	res = dentry->d_parent->d_inode->i_ino;
	spin_unlock(&dentry->d_lock);
	return res;
}

/* Transaction based IO helpers */

/*
 * An argresp is stored in an allocated page and holds the
 * size of the argument or response, along with its content
 */
struct simple_transaction_argresp {
	ssize_t size;
	char data[0];
};

#define SIMPLE_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct simple_transaction_argresp))

char *simple_transaction_get(struct file *file, const char __user *buf,
				size_t size);
ssize_t simple_transaction_read(struct file *file, char __user *buf,
				size_t size, loff_t *pos);
int simple_transaction_release(struct inode *inode, struct file *file);

void simple_transaction_set(struct file *file, size_t n);

/*
 * simple attribute files
 *
 * These attributes behave similar to those in sysfs:
 *
 * Writing to an attribute immediately sets a value, an open file can be
 * written to multiple times.
 *
 * Reading from an attribute creates a buffer from the value that might get
 * read with multiple read calls. When the attribute has been read
 * completely, no further read calls are possible until the file is opened
 * again.
 *
 * All attributes contain a text representation of a numeric value
 * that are accessed with the get() and set() functions.
 */
#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt)		\
static int __fops ## _open(struct inode *inode, struct file *file)	\
{									\
	__simple_attr_check_format(__fmt, 0ull);			\
	return simple_attr_open(inode, file, __get, __set, __fmt);	\
}									\
static const struct file_operations __fops = {				\
	.owner	 = THIS_MODULE,						\
	.open	 = __fops ## _open,					\
	.release = simple_attr_release,					\
	.read	 = simple_attr_read,					\
	.write	 = simple_attr_write,					\
	.llseek	 = generic_file_llseek,					\
}

static inline __printf(1, 2)
void __simple_attr_check_format(const char *fmt, ...)
{
	/* don't do anything, just let the compiler check the arguments; */
}

int simple_attr_open(struct inode *inode, struct file *file,
		     int (*get)(void *, u64 *), int (*set)(void *, u64),
		     const char *fmt);
int simple_attr_release(struct inode *inode, struct file *file);
ssize_t simple_attr_read(struct file *file, char __user *buf,
			 size_t len, loff_t *ppos);
ssize_t simple_attr_write(struct file *file, const char __user *buf,
			  size_t len, loff_t *ppos);

struct ctl_table;
int proc_nr_files(struct ctl_table *table, int write,
		  void __user *buffer, size_t *lenp, loff_t *ppos);
int proc_nr_dentry(struct ctl_table *table, int write,
		  void __user *buffer, size_t *lenp, loff_t *ppos);
int proc_nr_inodes(struct ctl_table *table, int write,
		   void __user *buffer, size_t *lenp, loff_t *ppos);
int __init get_filesystem_list(char *buf);

#define __FMODE_EXEC		((__force int) FMODE_EXEC)
#define __FMODE_NONOTIFY	((__force int) FMODE_NONOTIFY)

#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
#define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \
					    (flag & __FMODE_NONOTIFY)))

static inline bool is_sxid(umode_t mode)
{
	return (mode & S_ISUID) || ((mode & S_ISGID) && (mode & S_IXGRP));
}

static inline int check_sticky(struct inode *dir, struct inode *inode)
{
	if (!(dir->i_mode & S_ISVTX))
		return 0;

	return __check_sticky(dir, inode);
}

static inline void inode_has_no_xattr(struct inode *inode)
{
	if (!is_sxid(inode->i_mode) && (inode->i_sb->s_flags & SB_NOSEC))
		inode->i_flags |= S_NOSEC;
}

static inline bool is_root_inode(struct inode *inode)
{
	return inode == inode->i_sb->s_root->d_inode;
}

static inline bool dir_emit(struct dir_context *ctx,
			    const char *name, int namelen,
			    u64 ino, unsigned type)
{
	return ctx->actor(ctx, name, namelen, ctx->pos, ino, type) == 0;
}
static inline bool dir_emit_dot(struct file *file, struct dir_context *ctx)
{
	return ctx->actor(ctx, ".", 1, ctx->pos,
			  file->f_path.dentry->d_inode->i_ino, DT_DIR) == 0;
}
static inline bool dir_emit_dotdot(struct file *file, struct dir_context *ctx)
{
	return ctx->actor(ctx, "..", 2, ctx->pos,
			  parent_ino(file->f_path.dentry), DT_DIR) == 0;
}
static inline bool dir_emit_dots(struct file *file, struct dir_context *ctx)
{
	if (ctx->pos == 0) {
		if (!dir_emit_dot(file, ctx))
			return false;
		ctx->pos = 1;
	}
	if (ctx->pos == 1) {
		if (!dir_emit_dotdot(file, ctx))
			return false;
		ctx->pos = 2;
	}
	return true;
}
static inline bool dir_relax(struct inode *inode)
{
	inode_unlock(inode);
	inode_lock(inode);
	return !IS_DEADDIR(inode);
}

static inline bool dir_relax_shared(struct inode *inode)
{
	inode_unlock_shared(inode);
	inode_lock_shared(inode);
	return !IS_DEADDIR(inode);
}

extern bool path_noexec(const struct path *path);
extern void inode_nohighmem(struct inode *inode);

/* mm/fadvise.c */
extern int vfs_fadvise(struct file *file, loff_t offset, loff_t len,
		       int advice);

#if defined(CONFIG_IO_URING)
extern struct sock *io_uring_get_socket(struct file *file);
#else
static inline struct sock *io_uring_get_socket(struct file *file)
{
	return NULL;
}
#endif

#endif /* _LINUX_FS_H */

  • 2
    点赞
  • 16
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟
第一章 嵌入式开发系统概况(70分钟)(第一讲) 一、开发平台硬件资源 二、开发平台软件资源及文档 三、开发平台硬件安装 四、开发平台软件安装 1、VMARE虚拟机的安装 2、LINUX操作系统的安装 3、交叉环境GCC的安装编译 第二章 测试程序讲解 一、整板测试 (33分钟)(第二讲) 1、在u-boot下用串口下载测试程序 2、对各个实验进行演示操作,测试相应模块的功能 3、在u-boot下用网口下载测试程序 二、ADS1.2 开发环境使用及启动代码分析(第二讲) 1、ADS1.2 开发环境使用(22分钟) (1)、工程的建立 (2)、工程的编译分析 (3)、硬件的仿真调试 2、启动代码分析(80分钟) (1)、代码启动流程分析 (2)、相关寄存器配置分析 (3)、44binit.s讲解 (4)、option.s讲解 (5)、memcfg.s讲解 (6)、main.c讲解 (7)、相应头文件讲解 三、S3C444B0X I/O口与中断的分析(第三讲) 1、S3C444B0X I/O口(37分钟) (1)、I/O口寄存器配置 (2)、I/O口控制LED代码分析 (3)、UART寄存器配置及代码简要分析 2、 中断(46分钟) (1)、中断模式 (2)、中断寄存器配置 (3)、仿真调试按键外部中断的程序流程 四、AD温度采集显示、音频接口、NAND flash 读写(第四讲) 1、AD温度采集显示(30分钟) (1)、AD工作原理 (2)、AD寄存器配置 (3)、LM35温度传感器介绍 (4)、代码分析 (5)、仿真演示实验 2、 音频(32分钟) (1)、WAV格式及结构分析 (2)、IIS相关寄存器配置及代码分析 (3)、硬件结构分析 (4)、仿真演示实验 3、 NAND Flash (41分钟) (1)、NAND Flash与NOR Flash区别 (2)、芯片参数分析 (3)、硬件结构分系 (4)、对应芯片手册的读写时序分析代码 (5)、仿真演示实验 五、USB D12从设备(108分钟)(第五讲) 1、USB协议介绍 2、下位机代码简要分析 3、DRIVER STUDIO软件的安装 4、上位机驱动sys、inf文件生成概述 5、上位机应用程序的实现 (1)、工程的建立 (2)、代码编写及分析 (3)、对应应用程序编写下位机程序实现USB通信 第三章 ucos讲解(145分钟)(第六讲) 一、uC/OS-II的简单应用 1、uC/OS-II简介 (1)、MAIN函数的结构 (2)、任务的结构 (3)、重要uC/OS-II API函数介绍 (4)、多任务的机制 2、代码分析 (1)、启动代码分析 (2)、相关函数和结构体介绍 (3)、任务的创建 (4)、S3C44B0X定时器介绍 3、邮箱的实现 (1)、邮箱的建立 (2)、程序流程分析 (3)、仿真演示实验 4、事件的实现 (1)、事件的建立 (2)、程序流程分析 (3)、仿真演示实验 5、uC/OS-II实现AD对LM35温度采集 (1)、uC/OS-II文件目录介绍 (2)、程序讲解 (3)、超级终端显示温度 (4)、编写程序更改超级终端上显示字体和背景的颜色 6、uCOSII_uCGUI实现彩色液晶显示 第四章 嵌入式uclinux讲解 一、u-boot移植和分析(90分钟)(第七讲) 1、u-boot介绍 2、u-boot移植介绍 3、u-boot代码烧写进FALSH 4、代码编译分析 (1)、config.mk讲解 (2)、start.S讲解 (3)、memsetup.S讲解 (4)、board.c讲解 (5)、TX44B0.c讲解 (6)、u-boot.lds讲解 (7)、相应头文件讲解 二、uclinux讲解 1、准备工作(5分钟)(第八讲) (1)、uclinux复制 (2)、uclinux移动 (3)、uclinux解压 2、uclinux文件目录介绍(10分钟)(第八讲) 3、启动代码分析(107分钟) (1)、irq.c讲解 (2)、time.c讲解 (3)、head.s讲解 (4)、misc.c讲解 (5)、head-armv.s讲解 (6)、main.c讲解 (7)、version.s讲解 (8)、s3c44b0-rtc.c讲解 (9)、对应头文件讲解 (10)、u-boot用网口烧写uclinux内核并且固化到FLASH中运行的流程分析 4、字符驱动程序(15分钟)(第八讲) (1)、字符驱动简介 (2)、file_operations结构体介绍 5、GPIO字符驱动程序(130分钟)(第八讲) (1)、驱动程序编写 (2)、快照的使用 (3)、内核配置 (4)、内核编译 (5)、演示实验 6、中断字符驱动程序(52分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 7、AD字符驱动程序(10分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 8、RTC字符驱动程序(13分钟)(第八讲) (1)、驱动程序编写 (2)、内核配置 (3)、内核编译 (4)、演示实验 9、网络驱动编程(186分钟)(第九讲) (1)、网络协议简介 (2)、网络驱动框架简介 (3)、结构体、变量、函数介绍 (4)、Source Insight 软件的安装和使用 (5)、8390.h、8390.c、Ne.c、Netdevice.h程序讲解 (6)、网络文件系统NFS的建立与配置 (7)、LINUX内核的配置、编译 (8)、演示开发板与PC机通过NFS实现文件共享 10、块设备-USB主设备CH375驱动编程(122分钟)(第十讲) (1)、USB驱动框架简介 (2)、CH375-hw.h、Ch375-hcd.c程序讲解 (3)、LINUX内核的配置 (4)、设备号的创建 (5)、LINUX内核的编译 (6)、终端环境插入scsi-disk模块、usb核、usb-storage 、ch375-hcd模块 (7)、插入U盘演示实验,显示目录、创建文件夹 总计:1384分钟

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

静思心远

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值