The main purpose of DCI (Downlink Control Information) is the same as DCI in LTE(I strongly recommend you to read LTE DCI page first if you are not so familiar with what the DCI does). That is, it is a special set of information which schedules downlink data channel (e.g, PDSCH) or uplink data channel (e.g, PUSCH).
Followings are the list of DCI types and its contents defined in 38.212 - 7.3 Downlink control information.
Once a DCI data is constructed, it goes to the channel coding process and transmitted over PDCCH. This process is described in followng page.
This is used for the scheduling of PUSCH in one cell.
This is used for the scheduling of PUSCH in one cell.
| Field (Item) | Bits | Reference |
| Identifier for DCI formats | 1 | |
| Carrier indicator | 0 or 3 | |
| UL/SUL Indicator | 0,1 | 0 - bit for UE not configured with SUL in the cell 1 - bit for UEs configured with SUL in the cell |
| Bandwidth part indicator | 0,1,2 | Determined by BandwidthPart-Config in higher layer message and 38.212 - Table 7.3.1.1.2-1 |
| Frequency domain resource assignment | Variable | Variable with Resource Allocation Type |
| 4 | Carries the row index of the items in pusch_allocationList in RRC Number of Bit Length is determined by log(I,2), where I is the number of elements in pusch_allocationList in RRC | |
| Frequency Hopping Flag | 0,1 | |
| Modulation and coding scheme | 5 | 38.214 - 6.1.4 (See this table) |
| New data indicator | 1 | |
| Redundancy version | 2 | 0,1,2,3 |
| HARQ process number | 4 | |
| 1st Downlink assignment index | 1,2 | |
| 2nd Downlink assignment index | 0,2 | |
| TPC command for scheduled PUSCH | 2 | |
| SRS resource indicator | Variable | |
| Precoding information and number of layers (TPMI) | 0,2,3,4,5,6 | Determined by ulTxConfig, Number of Antenna ports, PUSCH-tp, ULmaxRank |
| Antenna ports | 2,3,4,5 | Determined by PUSCH-tp, DL-DMRS-config-type, DL-DMRS-config-max-len, Rank |
| SRS request | 2 | Table 7.3.1.1.2-24 |
| CSI request | 0,1,2,3,4,5,6 | Determined by ReportTriggerSize in RRC message. See Configure Aperiodic Trigger section for the details. |
| CBG transmission information | 0,2,4,6,8 | Determined by maxCodeBlockGroupPerTransportblock in RRC message |
| PTRS - DMRS Association | 0,2 | Determined by UL-PTRS-present, PUSCH-tp in RRC Message |
| beta_offsetr Indicator | 0,2 | 0 - if uci-on-PUSCH.dynamic = Not Configured 2 - otherwise, see Table 7.3.1.1.2-27 |
| DMRS Sequence Initialization | 0,1 | 0 - if PUSCH-tp=Disabled 1 - if PUSCH-tp=Enabled |
| UL-SCH Indicator | 1 | 0 - UL-SCH shall not be transmitted on the PUSCH 1 - UL-SCH shall be transmitted on the PUSCH |
This is used for the scheduling of PDSCH in one cell.
< DCI format 1_0 with CRC scrambled by C-RNTI >
| Field (Item) | Bits | Reference |
| Identifier for DCI formats | 1 | Always set to 1, meaning this is for DL |
| Frequency domain resource assignment | Variable | Variable with DL BWP N_RB |
| 4 | Carries the row index of the items in pdsch_allocationList in RRC | |
| VRB-to-PRB mapping | 1 | According to 38.212 Table 7.3.1.1.2-33 0 : Non-Interleaved 1 : Inverleaved |
| Modulation and coding scheme | 5 | |
| New data indicator | 1 | |
| Redundancy version | 2 | |
| HARQ process number | 4 | |
| Downlink assignment index | 2 | |
| TPC command for scheduled PUCCH | 2 | |
| PUCCH resource indicator | 3 | See here , here |
| PDSCH-to-HARQ_feedback timing indicator | 3 | maps to k1={1,2,3,4,5,6,7,8} |
< DCI format 1_0 with CRC scrambled by RA-RNTI >
: This is used to schedule RAR (Msg2) in RACH Procedure
| Field (Item) | Bits | Reference |
| Frequency domain resource assignment | Variable | Variable with DL BWP N_RB
|
| Time domain resource assignment | 4 | Carries the row index of the items in pdsch_allocationList in RRC |
| VRB-to-PRB mapping | 1 | According to 38.212 Table 7.3.1.1.2-33 0 : Non-Interleaved 1 : Inverleaved |
| Modulation and coding scheme | 5 | |
| TB Scaling | 2 | |
| Reserved | 16 | Reserved |
indicates the size of CORESET 0
< DCI format 1_0 with CRC scrambled by TC-RNTI >
: This is used to schedule Contention Resolution (Msg4) in RACH Procedure
| Field (Item) | Bits | Reference |
| Identifier for DCI formats | 1 | Always set to 1, meaning this is for DL |
| Frequency domain resource assignment | Variable | Variable with DL BWP N_RB
|
| Time domain resource assignment | 4 | Carries the row index of the items in pdsch_allocationList in RRC |
| VRB-to-PRB mapping | 1 | According to 38.212 Table 7.3.1.1.2-33 0 : Non-Interleaved 1 : Inverleaved |
| Modulation and coding scheme | 5 | |
| New data indicator | 1 | |
| Redundancy version | 2 | |
| HARQ process number | 4 | |
| Downlink assignment index | 2 | Reserved |
| TPC command for scheduled PUCCH | 2 | |
| PUCCH resource indicator | 3 | See here , here |
| PDSCH-to-HARQ_feedback timing indicator | 3 |
< DCI format 1_0 with CRC scrambled by SI-RNTI >
: This is used to schedule SIB1 and other SIB messages
| Field (Item) | Bits | Reference |
| Frequency domain resource assignment | Variable | Variable with DL BWP N_RB
|
| Time domain resource assignment | 4 | Carries the row index of the items.
|
| VRB-to-PRB mapping | 1 | According to 38.212 Table 7.3.1.1.2-33 0 : Non-Interleaved 1 : Inverleaved |
| Modulation and coding scheme | 5 | |
| Redundancy Version | 2 |
|
| System Information Indicator | 1 | 0 : SIB 1 1 : SI messages |
| Reserved | 15 | Reserved |
< DCI format 1_0 with CRC scrambled by P-RNTI>
: This is used to schedule Paging messages
| Field (Item) | Bits | Reference |
| Short Message Indicator | 2 | Refer to 38.212 - Table 7.3.1.2.1-1 |
| Short Messages | 8 | This field is set as reserved when 'Short Message Indicator' field is 01. Refer to 38.331 - Table 6.5-1 |
| Frequency domain resource assignment | Variable | Variable with DL BWP N_RB
|
| Time domain resource assignment | 4 | Carries the row index of the items in pdsch_allocationList in RRC |
| VRB-to-PRB mapping | 1 | According to 38.212 Table 7.3.1.1.2-33 0 : Non-Interleaved 1 : Inverleaved |
| Modulation and coding scheme | 5 | |
| TB Scaling | 2 |
|
| Reserved | 6 | Reserved |
This is used for the scheduling of PDSCH in one cell.
| Field (Item) | Bits | Reference |
| Carrier indicator | 0,3 | |
| Identifier for DCI formats | 1 | Always set to 1, indicating a DL DCI format |
| Bandwidth part indicator | 0,1,2 | |
| Frequency domain resource assignment | Variable | Variable with Resource Allocation Type |
| 4 | Carries the row index of the items in pdsch_allocationList in RRC | |
| VRB-to-PRB mapping | 0,1 | 0 bit if only resource allocation type 0 is configured or if interleaved VRB-to-PRB mapping is not configured by high layers; 1 bit according to Table 7.3.1.1.2-33 otherwise, only applicable to resource allocation type 1 |
| PRB bundling size indicator | 0,1 | 0 bit if the higher layer parameter prb-BundlingType is not configured or is set to 'static' 1 bit if the higher layer parameter prb-BundlingType is set to 'dynamic' |
| Rate matching indicator | 0,1,2 | Bit size is determined by higher layer parameters rateMatchPatternGroup1 and rateMatchPatternGroup2. |
| ZP CSI-RS Trigger | 0,1,2 | |
| Modulation and coding scheme [TB1] | 5 | |
| New data indicator [TB1] | 1 | |
| Redundancy version [TB1] | 2 | |
| Modulation and coding scheme [TB2] | 5 | |
| New data indicator [TB2] | 1 | |
| Redundancy version [TB2] | 2 | |
| HARQ process number | 4 | |
| Downlink assignment index | 0,2,4 | 4 bits if more than one serving cell are configured in the DL and the higher layer parameter pdsch-HARQACK-Codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI; 2 bits if only one serving cell is configured in the DL and the higher layer parameter pdsch-HARQ-ACKCodebook= dynamic, where the 2 bits are the counter DAI; 0 bits otherwise. |
| TPC command for scheduled PUCCH | 2 | |
| PUCCH resource indicator | 3 | See here , here |
| PDSCH-to-HARQ_feedback timing indicator | 0,1,2,3 | Number of bit is determined by log2(I). 'I' is the number of elements in the IE PUCCH-Config.dl-DataToUL-ACK |
| 4,5,6 | Determined by dmrs Configuration Type and max Length See this summary table | |
| Transmission configuration indication | 0,3 | 0 bit if higher layer parameter tci-PresentInDCI is not enabled; 3 bits otherwise (See QCL page) |
| SRS request | 2 | |
| CBG transmission information(CBGTI) | 0,2,4,6,8 | |
| CBG flushing out information(CBGFI) | 0,1 | |
| DMRS sequence initialization | 1 |
This is used for notifying the slot format. This DCI is scrambled by SFI_RNTI
| Field (Item) | Bits | Reference |
| Identifier for DCI formats | 1 | |
| Slot format indicator | Variable | Bit size is determined by RRC message here |
Slot format indicator : a Bit string indicating Slot format indicator 1, Slot format indicator 2, …, Slot format indicator N
This is used for notifying the PRB(s) and OFDM symbol(s) where UE may assume no transmission is intended for the UE.
| Field (Item) | Bits | Reference |
| Identifier for DCI formats | 1 | |
| Pre-emption indication | Variable |
The size of DCI format 2_1 is configurable by higher layers up to 126 bits
This is used for the transmission of TPC commands for PUCCH, PUSCH
| Field (Item) | Bits | Reference |
| Identifier for DCI formats | 1 | |
| TPC command number 1, TPC command number 2,…, TPC command number N | Variable |
This is used for the transmission of a group of TPC commands for SRS transmissions by one or more UEs. Along with a TPC command, a SRS request may also be transmitted.
| Field (Item) | Bits | Reference |
| Identifier for DCI formats | 1 | |
| block number 1, block number 2,…, block number B | Variable | |
| SRS Request | 0,2 | |
| TPC Command Number | 2 |
Reference
[1] 3GPP TS 38.212 NR;Multiplexing and channel coding
[2] 3GPP TSG RAN WG1 Meeting #92 : R1-1802117 : Discussion on DCI contents
[3] 3GPP TSG-RAN WG1 #92 : R1-1802905 : Remaining issues of the DCI contents and formats
[4] 3GPP TSG RAN WG1 Meeting #92 : R1-1801976 : DCI Contents and Formats
[5] 3GPP TSG RAN WG1 Meeting #92 : R1-1802097 : Remaining issues on MIMO related DCI design
[6] 3GPP TSG RAN WG1 Meeting #92 : R1-1802482 : DCI contents and formats
[7] 3GPP TSG RAN WG1 Meeting #92 : R1-1802597 : Remaining issues in DCI contents and formats
[8] 3GPP TSG RAN WG1 Meeting #92 : R1-1802209 : Remaining issues on DCI contents and formats
[9] 3GPP TSG RAN WG1 Meeting #92 : R1-1801730 : Open issues on DCI contents and formats
[10] 3GPP TSG RAN WG1 Meeting #92 : R1-1801624 : Remaining issues on DCI content
5091
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
