1. Open a command prompt and then set WIND_BASE env.variable.
set WIND_BASE=C:\Vx55ppc
put your VxWorks 5.5 PPC installation root path there
2. Set PATH
set PATH=c:\vx55ppc\host\x86-win32\bin:%PATH%
3. jump to mcoews_offs_00 directory
cd eXtremeDB\target\mcoews_offs_00
put your eXdb installation here
4. remove your Makefile
5. run makegen.bat. If everything is ok it runs quiet butmay tell you something in case of error
6. the Makefile should be generated in the directory
7 make