<CR><LF><response><CR><LF>

.2. AT Command Syntax
The “AT” or “at” prefix must be set at the beginning of each command line. To terminate a command line
enter  <CR>.  Commands  are  usually  followed  by  a  response  that  includes
“<CR><LF><response><CR><LF>”. Throughout this document, only the responses are presented,
“<CR><LF>” are omitted intentionally.
The AT Commands Set implemented by MC20 is a combination of GSM07.05, GSM07.07 and ITU-T
recommendation V.25ter as well as the AT commands developed by Quectel.
All these AT commands can be split into three categories syntactically: “basic”, “S parameter”, and
“extended”. They are listed as follows:

。AT命令语法

必须在每个命令行的开头设置“at”或“at”前缀。终止命令行输入< CR >。命令后面通常有一个响应，其中包括

“<cr><lf><response><cr><lf>”。在本文件中，仅给出了答复，故意省略“<cr><lf>”。

由MC20实现的AT命令集是GSM07.05、GSM07.07和ITU-T的组合。建议v.25ter以及Quectel开发的AT命令。

 

CR ：Carriage Return 回车。"\r"对应的十进制是13，十六进制是0x0D。

LF：Line Feed 换行。"\n"对应的十进制是10，十六进制是0x0A。