CentOS的虚拟机网卡eth0变成eth1

1.借鉴：

                  虚拟机拷贝后网卡eth0变成了eth1的解决办法  

2.开始

                  why: 使用parallels desktop或者是VMware克隆虚拟机之后，无法连接上网络，使用命令ifconfig eth0 找不到eth0，所以有了这篇文章。

           2.1  修改 /etc/udev/rules.d/70-persistent-net.rules 文件

                         具体做法是：

                                   将eth0那行删除，并将name由eth1改为eth0，注意：不能图方便删除eth1，因为ATTR{address}属性有用到

# This file was automatically generated by the /lib/udev/write_net_rules

# program, run by the persistent-net-generator.rules rules file.

#

# You can modify it, as long as you keep each rule on a single

# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000)

#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:d6:67:b6", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100f (e1000)

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}==" 00:0c:29:42:00:55 ", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

           2.2 配置ifcfg-eth0

                          [root@hadoop ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth0

eEVICE="eth0"

BOOTPROTO="static"

HWADDR="00:0c:29:42:00:55"

NM_CONTROLLED="yes"

ONBOOT="yes"

TYPE="Ethernet"

UUID="01786dd9-7107-44d7-ad97-a82411385918"

NM_CONTROLLED=no

PEERDNS=no

IPADDR=192.168.22.150

GATEWAY=192.168.22.2

DNS1=8.8.8.8

DNS2=192.168.1.1

NETMASK=255.255.255.0

                          需要注意的是：ifcfg-eth0文件中的HWADDR（一般为大写）要和70-persistent-net.rules文件中name为eth0的ATTR{address}（一般为小写）属性相同

需要注意的是标红的部分要相同

           2.3 虚拟机重启 reboot