IP第七次作业

实验要求与拓扑如下:

 实验思考：

1.我们需要先创建各个vlan

2.配置接口类型及增删标签

3.配置两个地址池以供dhcp服务

实验开始：

1.创建vlan：

sw1：

[sw1]vlan batch 2 to 6

sw2：

[sw2]vlan batch 2 to 6

sw3：

[sw3]vlan batch 2 to 6

2.配置接口类型及增删标签：

sw1：

[sw1]int g0/0/1

[sw1-GigabitEthernet0/0/1]port link-type access

[sw1-GigabitEthernet0/0/1]port default vlan 2

[sw1]int g 0/0/2

[sw1-GigabitEthernet0/0/2]port link-type hybrid

[sw1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6

[sw1-GigabitEthernet0/0/2]port hybrid pvid vlan 3

[sw1]int g 0/0/3

[sw1-GigabitEthernet0/0/3]port link-type trunk

[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6

[sw1]int g 0/0/4

[sw1-GigabitEthernet0/0/4]port link-type hybrid

[sw1-GigabitEthernet0/0/4]port hybrid untagged vlan3 4 5 6

[sw1-GigabitEthernet0/0/4]port hybrid tagged vlan 2

sw2：

[sw2]int g 0/0/1   

[sw2-GigabitEthernet0/0/1]port link-type access

[sw2-GigabitEthernet0/0/1]port default vlan 2

[sw2]int g 0/0/2

[sw2-GigabitEthernet0/0/2]port link-type hybrid

[sw2-GigabitEthernet0/0/2]port hybrid pvid vlan 4

[sw2-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6

[sw2]int g 0/0/3

[sw2-GigabitEthernet0/0/3]port link-type trunk

[sw2-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 t 6

[sw2]int g 0/0/4

[sw2-GigabitEthernet0/0/4]port link-type trunk

[sw2-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 t 6

sw3:

[sw3]int g 0/0/1

[sw3-GigabitEthernet0/0/1]port link-type hybrid

[sw3-GigabitEthernet0/0/1]port hybrid p v 5

[sw3-GigabitEthernet0/0/1]port hybrid untagged vlan 3 4 5

[sw3]int g 0/0/2

[sw3-GigabitEthernet0/0/2]port link-type hybrid

[sw3-GigabitEthernet0/0/2]port hybrid p v 6

[sw3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 6

[sw3]int g 0/0/3

[sw3-GigabitEthernet0/0/3]port link-type trunk

[sw3-GigabitEthernet0/0/3]port trunk allow-pass vlan

      

[sw3-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 3 4 5 6

3.l在R1上配置两个地址池以供dhcp服务：

（1）配置IP地址：

[R1]int g 0/0/0

[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24

[R1-GigabitEthernet0/0/0]int g 0/0/0.1

[R1-GigabitEthernet0/0/0.1]ip address 192.168.2.1 24

[R1-GigabitEthernet0/0/0.1]dot1q termination vid 2

[R1-GigabitEthernet0/0/0.1]arp broadcast enable

（2）配置DHCP:

[R1]dhcp enable

[R1]ip pool lt

Info: It's successful to create an IP address pool.

[R1-ip-pool-lt]network 192.168.1.0 mask 24

[R1-ip-pool-lt]gateway-list 192.168.1.1 

[R1-ip-pool-lt]dns-list 114.114.114.114

[R1-ip-pool-lt]q

[R1]ip pool nq

Info: It's successful to create an IP address pool.

[R1-ip-pool-nq]network 192.168.2.0 mask 24

[R1-ip-pool-nq]gateway-list 192.168.2.1

[R1-ip-pool-nq]dns-list 114.114.114.114

配置完毕，接下来观察实验现象：

ping一下：

 实验完成