zynq-mpsoc系列之zcu102的linux完整启动log信息
作者：卢浩
时间：2017.2.28
转载请注明出处
Xilinx Zynq MP First Stage Boot Loader
Release 2016.4 Feb 26 2017 - 05:20:58
NOTICE: ATF running on XCZU9EG/silicon v1/RTL5.1 at 0xfffea000
NOTICE: BL31: Secure code at 0x0
NOTICE: BL31: Non secure code at 0x8000000
NOTICE: BL31: v1.3(release):1bb0730
NOTICE: BL31: Built : 05:11:09, Feb 26 2017
U-Boot 2016.07 (Feb 27 2017 - 06:01:05 -0800) Xilinx ZynqMP ZCU102
I2C: ready
DRAM: 4 GiB
EL Level: EL2
Chip ID: xczuunknown
MMC: sdhci@ff170000: 0
SF: Detected N25Q512A with page size 512 Bytes, erase size 128 KiB, total 128 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Bootmode: SD_MODE1
Net: ZYNQ GEM: ff0e0000, phyaddr 12, interface rgmii-id
eth0: ethernet@ff0e0000
U-BOOT for
ethernet@ff0e0000 Waiting for PHY auto negotiation to complete........ done
BOOTP broadcast 1
DHCP client bound to address 172.28.96.8 (7 ms)
Hit any key to stop autoboot: 0
Device: sdhci@ff170000
Manufacturer ID: 41
OEM: 3432
Name: SD8GB
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 7.4 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading image.ub
61085564 bytes read in 4035 ms (14.4 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
Using 'conf@1' configuration
Trying 'kernel@0' kernel subimage
Description: Linux Kernel
Type: Kernel Image
Compression: uncompressed
Data Start: 0x100000d8
Data Size: 12313600 Bytes = 11.7 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00080000
Entry Point: 0x00080000
Hash algo: sha1
Hash value: c2da9845b8040a53d033e75ea1a37919935d7af6
Verifying Hash Integrity ... sha1+ OK
## Loading ramdisk from FIT Image at 10000000 ...
Using 'conf@1' configuration
Trying 'ramdisk@0' ramdisk subimage
Description: ramdisk
Type: RAMDisk Image
Compression: uncompressed
Data Start: 0x10bc67ec
Data Size: 48737177 Bytes = 46.5 MiB
Architecture: AArch64
OS: Linux
Load Address: unavailable
Entry Point: unavailable
Hash algo: sha1
Hash value: 4cf31f1eb2e988f407ff65c8d333b2f907874ce2
Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 10000000 ...
Using 'conf@1' configuration
Trying 'fdt@0' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x10bbe5d0
Data Size: 33126 Bytes = 32.3 KiB
Architecture: AArch64
Hash algo: sha1
Hash value: d3a89145c106fdd7dcc74c2709f2782327d23a9b
Verifying Hash Integrity ... sha1+ OK
Booting using the fdt blob at 0x10bbe5d0
Loading Kernel Image ... OK
Loading Ramdisk to 05185000, end 07fffb99 ... OK
Loading Device Tree to 0000000005179000, end 0000000005184165 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx (luhao@ubuntu) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP Mon Feb 27 06:03:47 PST 2017
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[ 0.000000] bootconsole [cdns0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] percpu: Embedded 20 pages/cpu @ffffffc87ff48000 s42240 r8192 d31488 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034240
[ 0.000000] Kernel command line: earlycon=cdns,mmio,0xFF000000,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0x73fff000-0x77fff000] (64MB) mapped at [ffffffc073fff000-ffffffc077ffefff]
[ 0.000000] Memory: 3872968K/4194304K available (8136K kernel code, 565K rwdata, 2856K rodata, 460K init, 374K bss, 190264K reserved, 131072K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdffff0000 ( 247 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008870000 ( 8128 KB)
[ 0.000000] .rodata : 0xffffff8008870000 - 0xffffff8008b3e000 ( 2872 KB)
[ 0.000000] .init : 0xffffff8008b3e000 - 0xffffff8008bb1000 ( 460 KB)
[ 0.000000] .data : 0xffffff8008bb1000 - 0xffffff8008c3e400 ( 565 KB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe1dc00000 ( 476 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc880000000 ( 34816 MB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Architected cp15 timer(s) running at 33.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x79c5e18f3, max_idle_ns: 440795202740 ns
[ 0.000003] sched_clock: 56 bits at 33MHz, resolution 30ns, wraps every 2199023255542ns
[ 0.008327] Console: colour dummy device 80x25
[ 0.012624] console [tty0] enabled
[ 0.016024] bootconsole [cdns0] disabled
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx (luhao@ubuntu) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP Mon Feb 27 06:03:47 PST 2017
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[ 0.000000] bootconsole [cdns0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] percpu: Embedded 20 pages/cpu @ffffffc87ff48000 s42240 r8192 d31488 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034240
[ 0.000000] Kernel command line: earlycon=cdns,mmio,0xFF000000,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0x73fff000-0x77fff000] (64MB) mapped at [ffffffc073fff000-ffffffc077ffefff]
[ 0.000000] Memory: 3872968K/4194304K available (8136K kernel code, 565K rwdata, 2856K rodata, 460K init, 374K bss, 190264K reserved, 131072K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdffff0000 ( 247 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008870000 ( 8128 KB)
[ 0.000000] .rodata : 0xffffff8008870000 - 0xffffff8008b3e000 ( 2872 KB)
[ 0.000000] .init : 0xffffff8008b3e000 - 0xffffff8008bb1000 ( 460 KB)
[ 0.000000] .data : 0xffffff8008bb1000 - 0xffffff8008c3e400 ( 565 KB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe1dc00000 ( 476 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc880000000 ( 34816 MB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Architected cp15 timer(s) running at 33.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x79c5e18f3, max_idle_ns: 440795202740 ns
[ 0.000003] sched_clock: 56 bits at 33MHz, resolution 30ns, wraps every 2199023255542ns
[ 0.008327] Console: colour dummy device 80x25
[ 0.012624] console [tty0] enabled
[ 0.016024] bootconsole [cdns0] disabled
[ 0.019970] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.00 BogoMIPS (lpj=132000)
[ 0.019982] pid_max: default: 32768 minimum: 301
[ 0.020090] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.020100] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.020694] ASID allocator initialised with 65536 entries
[ 0.021199] zynqmp_plat_init power management API version error. Expected: v0.2 - Found: v0.0
[ 0.021209] zynqmp_plat_init Power management API v0.2
[ 0.021282] EFI services will not be available.
[ 0.021606] Detected VIPT I-cache on CPU1
[ 0.021634] CPU1: Booted secondary processor [410fd034]
[ 0.021898] Detected VIPT I-cache on CPU2
[ 0.021916] CPU2: Booted secondary processor [410fd034]
[ 0.022165] Detected VIPT I-cache on CPU3
[ 0.022184] CPU3: Booted secondary processor [410fd034]
[ 0.022221] Brought up 4 CPUs
[ 0.022251] SMP: Total of 4 processors activated.
[ 0.022261] CPU: All CPU(s) started at EL2
[ 0.022278] alternatives: patching kernel code
[ 0.022949] devtmpfs: initialized
[ 0.026945] DMI not present or invalid.
[ 0.027028] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.030271] xor: measuring software checksum speed
[ 0.068032] 8regs : 2156.000 MB/sec
[ 0.108064] 8regs_prefetch: 1915.000 MB/sec
[ 0.148102] 32regs : 2389.000 MB/sec
[ 0.188129] 32regs_prefetch: 2156.000 MB/sec
[ 0.188142] xor: using function: 32regs (2389.000 MB/sec)
[ 0.188731] NET: Registered protocol family 16
[ 0.200155] cpuidle: using governor menu
[ 0.200204] vdso: 2 pages (1 code @ ffffff8008876000, 1 data @ ffffff8008bb8000)
[ 0.200240] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.200751] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.201749] ARM CCI_400_r1 PMU driver probed
[ 0.220441] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.288402] raid6: int64x1 gen() 404 MB/s
[ 0.356408] raid6: int64x1 xor() 419 MB/s
[ 0.424501] raid6: int64x2 gen() 606 MB/s
[ 0.492497] raid6: int64x2 xor() 544 MB/s
[ 0.560593] raid6: int64x4 gen() 891 MB/s
[ 0.628656] raid6: int64x4 xor() 673 MB/s
[ 0.696702] raid6: int64x8 gen() 1054 MB/s
[ 0.764764] raid6: int64x8 xor() 674 MB/s
[ 0.832904] raid6: neonx1 gen() 659 MB/s
[ 0.900900] raid6: neonx1 xor() 685 MB/s
[ 0.968970] raid6: neonx2 gen() 1024 MB/s
[ 1.037044] raid6: neonx2 xor() 914 MB/s
[ 1.105115] raid6: neonx4 gen() 1363 MB/s
[ 1.173181] raid6: neonx4 xor() 1062 MB/s
[ 1.241273] raid6: neonx8 gen() 1538 MB/s
[ 1.309324] raid6: neonx8 xor() 1117 MB/s
[ 1.309336] raid6: using algorithm neonx8 gen() 1538 MB/s
[ 1.309348] raid6: .... xor() 1117 MB/s, rmw enabled
[ 1.309360] raid6: using intx1 recovery algorithm
[ 1.309580] ACPI: Interpreter disabled.
[ 1.310226] arm-smmu fd800000.smmu: probing hardware configuration...
[ 1.310242] arm-smmu fd800000.smmu: SMMUv2 with:
[ 1.310256] arm-smmu fd800000.smmu: stage 1 translation
[ 1.310269] arm-smmu fd800000.smmu: stage 2 translation
[ 1.310282] arm-smmu fd800000.smmu: nested translation
[ 1.310299] arm-smmu fd800000.smmu: stream matching with 48 register groups, mask 0x7fff
[ 1.310320] arm-smmu fd800000.smmu: 16 context banks (0 stage-2 only)
[ 1.310336] arm-smmu fd800000.smmu: Supported page sizes: 0x60211000
[ 1.310350] arm-smmu fd800000.smmu: Stage-1: 48-bit VA -> 48-bit IPA
[ 1.310364] arm-smmu fd800000.smmu: Stage-2: 48-bit IPA -> 48-bit PA
[ 1.311225] arm-smmu fd800000.smmu: registered 26 master devices
[ 1.311482] iommu: Adding device fd500000.dma to group 0
[ 1.311514] iommu: Adding device fd510000.dma to group 1
[ 1.311541] iommu: Adding device fd520000.dma to group 2
[ 1.311569] iommu: Adding device fd530000.dma to group 3
[ 1.311597] iommu: Adding device fd540000.dma to group 4
[ 1.311624] iommu: Adding device fd550000.dma to group 5
[ 1.311651] iommu: Adding device fd560000.dma to group 6
[ 1.311678] iommu: Adding device fd570000.dma to group 7
[ 1.311716] iommu: Adding device ffa80000.dma to group 8
[ 1.311746] iommu: Adding device ffa90000.dma to group 9
[ 1.311774] iommu: Adding device ffaa0000.dma to group 10
[ 1.311801] iommu: Adding device ffab0000.dma to group 11
[ 1.311831] iommu: Adding device ffac0000.dma to group 12
[ 1.311859] iommu: Adding device ffad0000.dma to group 13
[ 1.311886] iommu: Adding device ffae0000.dma to group 14
[ 1.311913] iommu: Adding device ffaf0000.dma to group 15
[ 1.311951] iommu: Adding device ff0e0000.ethernet to group 16
[ 1.312028] iommu: Adding device ff0f0000.spi to group 17
[ 1.312087] iommu: Adding device ff170000.sdhci to group 18
[ 1.312143] iommu: Adding device amba:usb@fe200000 to group 19
[ 1.312459] SCSI subsystem initialized
[ 1.312665] usbcore: registered new interface driver usbfs
[ 1.312709] usbcore: registered new interface driver hub
[ 1.312753] usbcore: registered new device driver usb
[ 1.312856] media: Linux media interface: v0.10
[ 1.312897] Linux video capture interface: v2.00
[ 1.312936] pps_core: LinuxPPS API ver. 1 registered
[ 1.312949] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.312984] PTP clock support registered
[ 1.313034] EDAC MC: Ver: 3.0.0
[ 1.313232] dmi: Firmware registration failed.
[ 1.313310] FPGA manager framework
[ 1.313384] Advanced Linux Sound Architecture Driver Initialized.
[ 1.314168] clocksource: Switched to clocksource arch_sys_counter
[ 1.314274] VFS: Disk quotas dquot_6.6.0
[ 1.314321] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.314535] pnp: PnP ACPI: disabled
[ 1.318247] NET: Registered protocol family 2
[ 1.318593] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.318894] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.319428] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.319480] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.319576] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.319776] NET: Registered protocol family 1
[ 1.319969] RPC: Registered named UNIX socket transport module.
[ 1.319983] RPC: Registered udp transport module.
[ 1.319995] RPC: Registered tcp transport module.
[ 1.320007] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.320150] Trying to unpack rootfs image as initramfs...
[ 3.662368] Freeing initrd memory: 47592K (ffffffc005185000 - ffffffc007fff000)
[ 3.662572] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 3.663214] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 3.663296] audit: initializing netlink subsys (disabled)
[ 3.663348] audit: type=2000 audit(3.652:1): initialized
[ 3.663928] workingset: timestamp_bits=60 max_order=20 bucket_order=0
[ 3.664669] NFS: Registering the id_resolver key type
[ 3.664705] Key type id_resolver registered
[ 3.664717] Key type id_legacy registered
[ 3.664740] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.664786] jffs2: version 2.2. (NAND) (SUMMARY) 漏 2001-2006 Red Hat, Inc.
[ 3.673177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.673210] io scheduler noop registered
[ 3.673225] io scheduler deadline registered
[ 3.673256] io scheduler cfq registered (default)
[ 3.673756] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 3.673800] PCI host bridge /amba/pcie@fd0e0000 ranges:
[ 3.673816] No bus range found for /amba/pcie@fd0e0000, using [bus 00-ff]
[ 3.673840] MEM 0xe0000000..0xefffffff -> 0xe0000000
[ 3.673857] MEM 0x600000000..0x7ffffffff -> 0x600000000
[ 3.673952] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 3.673970] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.673985] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 3.674000] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
[ 3.674249] pci 0000:00:00.0: cannot attach to SMMU, is it on the same bus?
[ 3.674264] iommu: Adding device 0000:00:00.0 to group 20
[ 3.674370] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 3.675008] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 3.675267] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 3.675388] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 3.675507] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 3.675623] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 3.675744] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 3.675863] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 3.675978] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 3.676101] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 3.676226] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 3.676345] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 3.676466] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 3.676586] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 3.676703] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 3.676826] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 3.676947] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 3.677067] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 3.677231] xenfs: not registering filesystem on non-xen platform
[ 3.699315] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.700388] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 220, base_baud = 6250000) is a xuartps
[ 4.902244] console [ttyPS0] enabled
[ 4.906040] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 221, base_baud = 6250000) is a xuartps
[ 4.915351] [drm] Initialized drm 1.1.0 20060810
[ 4.920246] Unable to detect cache hierarchy from DT for CPU 0
[ 4.930327] brd: module loaded
[ 4.935876] loop: module loaded
[ 4.939622] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 4.948606] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
[ 4.959023] scsi host0: ahci-ceva
[ 4.962471] scsi host1: ahci-ceva
[ 4.965838] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 217
[ 4.973855] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 217
[ 4.982047] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 4.988882] zynqmp-qspi ff0f0000.spi: rx bus width not found
[ 4.994837] m25p80 spi0.0: found n25q512a, expected m25p80
[ 5.000423] m25p80 spi0.0: n25q512a (131072 Kbytes)
[ 5.005292] 4 ofpart partitions found on MTD device spi0.0
[ 5.010798] Creating 4 MTD partitions on "spi0.0":
[ 5.015621] 0x000000000000-0x000001e00000 : "boot"
[ 5.020887] 0x000001e00000-0x000001e40000 : "bootenv"
[ 5.026319] 0x000001e40000-0x000004240000 : "kernel"
[ 5.031649] 0x000004240000-0x000008000000 : "spare"
[ 5.038402] libphy: Fixed MDIO Bus: probed
[ 5.042900] tun: Universal TUN/TAP device driver, 1.6
[ 5.047930] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 5.054248] CAN device driver interface
[ 5.058793] gpiod_set_value: invalid GPIO
[ 5.063138] libphy: MACB_mii_bus: probed
[ 5.070026] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 30 (00:0a:35:00:22:01)
[ 5.079887] TI DP83867 ff0e0000.etherne:0c: attached PHY driver [TI DP83867] (mii_bus:phy_addr=ff0e0000.etherne:0c, irq=-1)
[ 5.091621] usbcore: registered new interface driver asix
[ 5.097045] usbcore: registered new interface driver ax88179_178a
[ 5.103164] usbcore: registered new interface driver cdc_ether
[ 5.109039] usbcore: registered new interface driver net1080
[ 5.114736] usbcore: registered new interface driver cdc_subset
[ 5.120696] usbcore: registered new interface driver zaurus
[ 5.126329] usbcore: registered new interface driver cdc_ncm
[ 5.132847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.139370] ehci-pci: EHCI PCI platform driver
[ 5.144066] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.149544] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.157495] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f665 hci version 0x100 quirks 0x00010010
[ 5.166245] xhci-hcd xhci-hcd.0.auto: irq 225, io mem 0xfe200000
[ 5.172366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.179154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.186449] usb usb1: Product: xHCI Host Controller
[ 5.191335] usb usb1: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 5.197297] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 5.202468] hub 1-0:1.0: USB hub found
[ 5.206197] hub 1-0:1.0: 1 port detected
[ 5.210243] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.215716] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.223471] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.231649] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.238431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.245710] usb usb2: Product: xHCI Host Controller
[ 5.250612] usb usb2: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 5.256575] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 5.261712] hub 2-0:1.0: USB hub found
[ 5.265436] hub 2-0:1.0: 1 port detected
[ 5.269531] usbcore: registered new interface driver uas
[ 5.274884] usbcore: registered new interface driver usb-storage
[ 5.281081] mousedev: PS/2 mouse device common for all mice
[ 5.286996] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
[ 5.291332] ata1: SATA link down (SStatus 0 SControl 330)
[ 5.291361] ata2: SATA link down (SStatus 0 SControl 330)
[ 5.305121] i2c /dev entries driver
[ 5.310613] pca953x 0-0020: interrupt support not compiled in
[ 5.318112] pca953x 0-0021: interrupt support not compiled in
[ 5.323893] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 206
[ 5.330133] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 207
[ 5.336881] i2c i2c-0: Added multiplexed i2c bus 2
[ 5.342085] i2c i2c-0: Added multiplexed i2c bus 3
[ 5.347507] i2c i2c-0: Added multiplexed i2c bus 4
[ 5.352380] i2c i2c-0: Added multiplexed i2c bus 5
[ 5.357144] pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca9544
[ 5.364902] at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 5.371606] i2c i2c-6: Failed to register i2c client 24c08 at 0x55 (-16)
[ 5.378342] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@55
[ 5.387383] i2c i2c-6: Failed to register i2c client 24c08 at 0x56 (-16)
[ 5.394122] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@56
[ 5.403163] i2c i2c-6: Failed to register i2c client 24c08 at 0x57 (-16)
[ 5.409903] i2c i2c-6: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@57
[ 5.418948] i2c i2c-1: Added multiplexed i2c bus 6
[ 5.423915] i2c i2c-1: Added multiplexed i2c bus 7
[ 5.428821] i2c i2c-1: Added multiplexed i2c bus 8
[ 5.433733] i2c i2c-1: Added multiplexed i2c bus 9
[ 5.438658] i2c i2c-1: Added multiplexed i2c bus 10
[ 5.443612] i2c i2c-1: Added multiplexed i2c bus 11
[ 5.448560] i2c i2c-1: Added multiplexed i2c bus 12
[ 5.453510] i2c i2c-1: Added multiplexed i2c bus 13
[ 5.458367] pca954x 1-0074: registered 8 multiplexed busses for I2C switch pca9548
[ 5.466199] i2c i2c-1: Added multiplexed i2c bus 14
[ 5.471150] i2c i2c-1: Added multiplexed i2c bus 15
[ 5.476114] i2c i2c-1: Added multiplexed i2c bus 16
[ 5.481283] i2c i2c-1: Added multiplexed i2c bus 17
[ 5.486247] i2c i2c-1: Added multiplexed i2c bus 18
[ 5.491198] i2c i2c-1: Added multiplexed i2c bus 19
[ 5.496151] i2c i2c-1: Added multiplexed i2c bus 20
[ 5.501108] i2c i2c-1: Added multiplexed i2c bus 21
[ 5.505966] pca954x 1-0075: registered 8 multiplexed busses for I2C switch pca9548
[ 5.514913] ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.521579] ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.528244] ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.534905] ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.541568] ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.548229] ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.554899] ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.561564] ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.568233] ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.574894] ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.581630] ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
[ 5.588290] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.594957] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.601616] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.608280] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.614943] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.621605] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.628275] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 5.657684] EDAC MC: ECC not enabled
[ 5.661354] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
[ 5.670480] EDAC MC: bug in low-level driver: attempt to assign
[ 5.670480] duplicate dev_idx 0 in add_edac_dev_to_global_list()
[ 5.682800] zynqmp-ocm-edac: probe of ff960000.memory-controller failed with error -1
[ 5.690739] sdhci: Secure Digital Host Controller Interface driver
[ 5.696903] sdhci: Copyright(c) Pierre Ossman
[ 5.701291] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.746172] mmc0: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using ADMA 64-bit
[ 5.754336] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.760467] usbcore: registered new interface driver usbhid
[ 5.766022] usbhid: USB HID core driver
[ 5.775614] si570 8-005d: registered, current frequency 300000000 Hz
[ 5.794539] si570 9-005d: registered, current frequency 148500000 Hz
[ 5.801103] fpga_manager fpga0: Xilinx ZynqMp FPGA Manager registered
[ 5.808123] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 5.818953] Initializing XFRM netlink socket
[ 5.823259] NET: Registered protocol family 10
[ 5.828118] sit: IPv6 over IPv4 tunneling driver
[ 5.833061] NET: Registered protocol family 17
[ 5.837490] NET: Registered protocol family 15
[ 5.841951] can: controller area network core (rev 20120528 abi 9)
[ 5.848202] NET: Registered protocol family 29
[ 5.852656] can: raw protocol (rev 20120528)
[ 5.856945] can: broadcast manager protocol (rev 20120528 t)
[ 5.862648] can: netlink gateway (rev 20130117) max_hops=1
[ 5.868332] 9pnet: Installing 9P2000 support
[ 5.872586] Key type dns_resolver registered
[ 5.877172] registered taskstats version 1
[ 5.881625] Btrfs loaded
[ 5.884293] rtc_zynqmp ffa60000.rtc: setting system clock to 2016-09-01 15:37:54 UTC (1472744274)
[ 5.893334] ALSA device list:
[ 5.896258] No soundcards found.
[ 5.900128] Freeing unused kernel memory: 460K (ffffff8008b3e000 - ffffff8008bb1000)
INIT: version 2.88 booting[ 5.915897] mmc0: new high speed SDHC card at address 0007
[ 5.921744] mmcblk0: mmc0:0007 SD8GB 7.42 GiB
[ 5.927579] mmcblk0: p1
[ 6.485908] random: dd urandom read with 7 bits of entropy available
Mon Feb 27 14:21:53 UTC 2017
Starting internet superserver: inetd.
INIT: Entering runlevel: 5
Configuring network interfaces... [ 6.585031] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
[ 9.066489] macb ff0e0000.ethernet eth0: link up (1000/Full)
[ 9.072152] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 172.28.96.8...
Lease of 172.28.96.8 obtained, lease time 28800
/etc/udhcpc.d/50default: Adding DNS 172.27.201.110
/etc/udhcpc.d/50default: Adding DNS 172.18.7.24
done.
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
generating ssh ED25519 key...
done.
Starting syslogd/klogd: done
Starting tcf-agent: OK
PetaLinux 2016.4 plnx_aarch64 /dev/ttyPS0
plnx_aarch64 login: root
Password:
root@plnx_aarch64:~# df -h
Filesystem Size Used Available Use% Mounted on
devtmpfs 64.0K 4.0K 60.0K 6% /dev
tmpfs 1.9G 32.0K 1.9G 0% /run
tmpfs 1.9G 84.0K 1.9G 0% /var/volatile
tmpfs 64.0K 4.0K 60.0K 6% /dev
/dev/mmcblk0p1 7.4G 84.1M 7.3G 1% /run/media/mmcblk0p1
扫一扫
6390
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
