.Hisi 3516d_ov4689_5658调试

-----------------------------------------------------------------------------------------------------------------
修改sample 模块 下面的Makefile.param 进行修改
SENSOR_TYPE ?= SONY_IMX178_LVDS_1080P_30FPS
改为
#SENSOR_TYPE ?= SONY_IMX178_LVDS_1080P_30FPS

#SENSOR_TYPE ?= OMNIVISION_OV4689_MIPI_1080P_30FPS
改为：
SENSOR_TYPE ?= OMNIVISION_OV4689_MIPI_1080P_30FPS

..\mpp\sample\common\sample_comm_vi.c 修改如下：
combo_dev_attr_t MIPI_4lane_SENSOR_OV4689_12BIT_ATTR =
{
    .input_mode = INPUT_MODE_MIPI,
    {

        .mipi_attr =
        {
            RAW_DATA_12BIT,
            {1, 0, 2, 3, -1, -1, -1, -1}
        }
    }
};

改为

combo_dev_attr_t MIPI_4lane_SENSOR_OV4689_12BIT_ATTR =
{
    .input_mode = INPUT_MODE_MIPI,
    {

        .mipi_attr =
        {
            RAW_DATA_12BIT,
            {0, 1, 2, 3, -1, -1, -1, -1}
        }
    }
};

解释，就是把 img_size 变成了1 而wdr_mode 设置为0 禁用。
typedef struct
{
    img_size_t          img_size;                   /* oringnal sensor input image size */
    wdr_mode_e          wdr_mode;                   /* WDR mode */
    lvds_sync_mode_e    sync_mode;                  /* sync mode: SOL, SAV */
    raw_data_type_e     raw_data_type;              /* raw data type: 8/10/12/14 bit */
    lvds_bit_endian     data_endian;                /* data endian: little/big */
    lvds_bit_endian     sync_code_endian;           /* sync code endian: little/big */
    short               lane_id[LVDS_LANE_NUM];     /* lane_id: -1 - disable */

    /* each vc has 4 params, sync_code[i]:
       sync_mode is SYNC_MODE_SOL: SOF, EOF, SOL, EOL
       sync_mode is SYNC_MODE_SAV: invalid sav, invalid eav, valid sav, valid eav */
    unsigned short      sync_code[LVDS_LANE_NUM][WDR_VC_NUM][SYNC_CODE_NUM];
} lvds_dev_attr_t;

重新运行，成功出现图像。

---------------------------------------------------------------------------------------------------------------
二。 调试bv_test 模块
1.
修改sensor Type， 打开bv_test 上一级目录中的Makefile.param：
SENSOR_TYPE ?= SONY_IMX178_LVDS_1080P_30FPS
改为
#SENSOR_TYPE ?= SONY_IMX178_LVDS_1080P_30FPS

#SENSOR_TYPE ?= OMNIVISION_OV4689_MIPI_1080P_30FPS
改为：
SENSOR_TYPE ?= OMNIVISION_OV4689_MIPI_1080P_30FPS

2.
修改W:\mpp\project\bv_test\bv_hal.c
PIC_SIZE_E enPicSize = PIC_HD1080; 

HI_MPI_VB_Init 初始化失败:
修改：缓存池个数，修改为4个
 stVbConf.astCommPool[0].u32BlkCnt  = u32ViChnCnt * 4;
 
 [SAMPLE_COMM_VPSS_StartGroup]-88: HI_MPI_VPSS_CreateGrp failed with 0xa0078010!
[bv_hal_start]-107: start VPSS GROUP failed!

3.
Error：
    mmz_userdev:ioctl_mmb_alloc: hil_mmb_alloc(, 921600, 0x00000000, 0, ) failed!
    System alloc mmz memory failed!
    [SAMPLE_COMM_IVE_CreateImage]-894: Mmz Alloc fail,Error(0xffffffff)

Index: bv_core.c
===================================================================
-#define MAX_GRAY_IMG   64
+#define MAX_GRAY_IMG   10

4 .
W:\mpp\project\common\sample_comm_vi.c 修改如下：
combo_dev_attr_t MIPI_4lane_SENSOR_OV4689_12BIT_ATTR =
{
    .input_mode = INPUT_MODE_MIPI,
    {

        .mipi_attr =
        {
            RAW_DATA_12BIT,
            {1, 0, 2, 3, -1, -1, -1, -1}
        }
    }
};

改为

combo_dev_attr_t MIPI_4lane_SENSOR_OV4689_12BIT_ATTR =
{
    .input_mode = INPUT_MODE_MIPI,
    {

        .mipi_attr =
        {
            RAW_DATA_12BIT,
            {0, 1, 2, 3, -1, -1, -1, -1}
        }
    }
};

============================================================================
如果修改为 ov4689 4M

打开 SENSOR_TYPE ?= OMNIVISION_OV4689_MIPI_4M_30FPS
修改W:\mpp\project\bv_test\bv_hal.c
PIC_SIZE_E enPicSize = PIC_2592x1520; 
stVbConf.astCommPool[0].u32BlkCnt  = u32ViChnCnt * 2;

bv_core.c
#define MAX_GRAY_IMG   4

W:\mpp\project\common\sample_comm_vi.c 修改如下：
combo_dev_attr_t MIPI_4lane_SENSOR_OV4689_12BIT_ATTR =
{
    .input_mode = INPUT_MODE_MIPI,
    {

        .mipi_attr =
        {
            RAW_DATA_12BIT,
            {1, 0, 2, 3, -1, -1, -1, -1}
        }
    }
};

改为

combo_dev_attr_t MIPI_4lane_SENSOR_OV4689_12BIT_ATTR =
{
    .input_mode = INPUT_MODE_MIPI,
    {

        .mipi_attr =
        {
            RAW_DATA_12BIT,
            {0, 1, 2, 3, -1, -1, -1, -1}
        }
    }
};

===================================5658 ERRoR ===================================================
sion
=============SAMPLE_COMM_VI_SetMipiAttr enWDRMode: 0
linear mode
-------OV ov5658 Sensor 5M30fps Initial OK!-------
u32Width:720, u32Square:1
[hal_init_fb]-103: Put variable screen info failed!
process_list_init
MMB LEAK(pid=1128): 0x841FE000, 3686400 bytes, ''
mmz_userdev_release: mmb<0x841FE000> mapped to userspace 0xb699e000 will be force unmaped!
MMB LEAK(pid=1128): 0x84582000, 4915200 bytes, ''
mmz_userdev_release: mmb<0x84582000> mapped to userspace 0xb64ee000 will be force unmaped!
MMB LEAK(pid=1128): 0x84A32000, 1228800 bytes, ''
mmz_userdev_release: mmb<0x84A32000> mapped to userspace 0xb63c2000 will be force unmaped!
MMB LEAK(pid=1128): 0x84B5E000, 3686400 bytes, ''
mmz_userdev_release: mmb<0x84B5E000> mapped to userspace 0xb603e000 will be force unmaped!
MMB LEAK(pid=1128): 0x84EE2000, 4915200 bytes, ''
mmz_userdev_release: mmb<0x84EE2000> mapped to userspace 0xb5b8e000 will be force unmaped!
Segmentation fault

修改 
长和宽