Windows配置NTP服务器

一、修改注册表

# 进入系统服务参数路径
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters
# Type键的值改为NTP 类型REG_SZ
"Type"="NTP"

# 进入系统服务配置路径
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config
# AnnounceFlags键的值改为16进制的5 类型REG_DWORD
"AnnounceFlags"=dword:00000005

# 进入系统服务路径
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
# Enabled键的值改为16进制的1 类型REG_DWORD
"Enabled"=dword:00000001

二、重启服务

# 停止服务
net stop w32time
# 启动服务
net start w32time

三、添加防火墙信任规则

# 放行UDP的123端口入站
netsh advfirewall firewall add rule name="NTPServer" protocol=UDP dir=in localport=123 action=allow

附件：修改注册表reg文件

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters]
"Type"="NTP"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config]
"AnnounceFlags"=dword:00000005

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer]
"Enabled"=dword:00000001