STM32F1 硬件I2C驱动DAC(LTC2605)

#include "i2c_drive_mcp.h"

#define I2C_Speed     100000

#define Master_Address 0x0A  //全部通道

static void I2C_GPIO_Config(void)
{
    GPIO_InitTypeDef  GPIO_InitStructure;
    
    /*Enable the Clock*/
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB,ENABLE);
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1,ENABLE);  
    
    /* Config :PB6-I2C1_SCL¡¢PB7-I2C1_SDA*/
    GPIO_InitStructure.GPIO_Pin=GPIO_Pin_6 | GPIO_Pin_7;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
    GPIO_Init(GPIOB, &GPIO_InitStructure);
    
}

static void I2C_Mode_Config(void)
{
        
    I2C_InitTypeDef  I2C_InitStructure; 
    I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
    I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2;
    I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
    I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
    I2C_InitStructure.I2C_OwnAddress1=Master_Address;  
    I2C_InitStructure.I2C_ClockSpeed = I2C_Speed;

    I2C_Init(I2C1, &I2C_InitStructure);
    //I2C_DeInit(I2C2);    
    I2C_Cmd(I2C1, EN