ENSP教程---配置DHCP

目录

一、实验目标

二、实验拓扑图

三、配置基本环境

四、启用DHCP服务

---

一、实验目标

• 掌握DHCP全局地址池的配置方法；
• 掌握在交换机端口启用DHCP发现功能和IP地址分配的功能；

二、实验拓扑图

三、配置基本环境

注：这里是首先要关闭R1上的G0/0/1接口，和R2上的G0/0/1接口。

R1：

<R1>system-view 
Enter system view, return user view with Ctrl+Z.
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip address 10.1.12.1 24
[R1-GigabitEthernet0/0/0]q
[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]ip address 10.1.13.2 24   
[R1-GigabitEthernet0/0/1]shutdown 
Mar 23 2022 11:49:25-08:00 R1 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern
et0/0/1 has turned into DOWN state.
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]q
[R1]

R2：

<R2>system-view 
Enter system view, return user view with Ctrl+Z.
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip address 10.1.13.2 24
[R2-GigabitEthernet0/0/0]q
[R2]int g0/0/1
[R2-GigabitEthernet0/0/1]ip address 10.1.12.2 24
[R2-GigabitEthernet0/0/1]shutdown 
Mar 23 2022 11:53:51-08:00 R2 %%01IFPDT/4/IF_STATE(l)[0]:I