利用NAT实现外网主机访问内网服务器（原创）

拓扑图：

步骤一：配置IP地址

PCA IP:172.20.106.2 MASK:255.255.255.0 GAT :172.20.106.1

SERVER0: IP: 10.10.10.2 MASK:255.255.255.0 GAT:10.10.10.1

RA:

Router#

Router#conf

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int f0/0

Router(config-if)#ip add 172.20.106.2 255.255.255.0

Router(config-if)#no sh

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#int s2/0

Router(config-if)#

Router(config-if)#ip add 192.168.10.1 255.255.255.0

Router(config-if)#no sh

%LINK-5-CHANGED: Interface Serial2/0,