一、要求
全网可达
二、步骤
1.创建vlan
LSW1
[Huawei]vlan batch 2 to 5
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]port link-type access
[Huawei-Ethernet0/0/2]port default vlan 2
[Huawei]interface e0/0/3
[Huawei-Ethernet0/0/3]port link-type access
[Huawei-Ethernet0/0/3]port default vlan 3
[Huawei]interface e0/0/4
[Huawei-Ethernet0/0/4]port link-type access
[Huawei-Ethernet0/0/4]port default vlan 4
[Huawei]interface e0/0/5
[Huawei-Ethernet0/0/5]port link-type access
[Huawei-Ethernet0/0/5]port default vlan 5
[Huawei]interface e0/0/1
[Huawei-Ethernet0/0/1]port link-type trunk
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan all
2.创建环回地址、开启DHCP服务
r1
[r1]interface g0/0/1
[r1-GigabitEthernet0/0/1]ip address 12.1.1.1 24
[r1]interface LoopBack0
[r1-LoopBack0]ip address 1.1.1.1 32
[r1]interface g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]ip address 172.16.1.1 24
[r1-GigabitEthernet0/0/0.1]dhcp select global
[r1-GigabitEthernet0/0/0.1]arp broadcast enable
[r1]interface g0/0/0.2
[r1-GigabitEthernet0/0/0.2]dot1q termination vid 3
[r1-GigabitEthernet0/0/0.2]ip address 172.16.2.1 24
[r1-GigabitEthernet0/0/0.2]dhcp select global
[r1-GigabitEthernet0/0/0.2]arp broadcast enable
[r1]interface g0/0/0.3
[r1-GigabitEthernet0/0/0.3]dot1q termination vid 4
[r1-GigabitEthernet0/0/0.3]ip address 172.16.3.1 24
[r1-GigabitEthernet0/0/0.3]dhcp select global
[r1-GigabitEthernet0/0/0.3]arp broadcast enable
[r1]interface g0/0/0.4
[r1-GigabitEthernet0/0/0.4]dot1q termination vid 5
[r1-GigabitEthernet0/0/0.4]ip address 172.16.4.1 24
[r1-GigabitEthernet0/0/0.4]dhcp select global
[r1-GigabitEthernet0/0/0.4]arp broadcast enable
[r1]dhcp enable
[r1]ip pool 1
Info: It's successful to create an IP address pool.
[r1-ip-pool-1]network 172.16.1.0 mask 255.255.255.0
[r1-ip-pool-1]gateway-list 172.16.1.1
[r1-ip-pool-1]dns-list 8.8.8.8 114.114.114.114
[r1-ip-pool-1]quit
[r1]ip pool 2
Info: It's successful to create an IP address pool.
[r1-ip-pool-2]network 172.16.2.0 mask 255.255.255.0
[r1-ip-pool-2]gateway-list 172.16.2.1
[r1-ip-pool-2]dns-list 8.8.8.8 114.114.114.114
[r1-ip-pool-2]quit
[r1]ip pool 3
Info: It's successful to create an IP address pool.
[r1-ip-pool-3]network 172.16.3.0 mask 255.255.255.0
[r1-ip-pool-3]gateway-list 172.16.3.1
[r1-ip-pool-3]dns-list 8.8.8.8 114.114.114.114
[r1-ip-pool-3]quit
[r1]ip pool 4
Info: It's successful to create an IP address pool.
[r1-ip-pool-4]network 172.16.4.0 mask 255.255.255.0
[r1-ip-pool-4]gateway-list 172.16.4.1
[r1-ip-pool-4]dns-list 8.8.8.8 114.114.114.114
打开PC的DHCP服务
3.LSW3
[Huawei]vlan batch 2 3
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]port link-type access
[Huawei-Ethernet0/0/2]port default vlan 2
[Huawei-Ethernet0/0/2]int e0/0/3
[Huawei-Ethernet0/0/3]port link-type access
[Huawei-Ethernet0/0/3]port default vlan 3
[Huawei]int e0/0/1
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan all
r3
[r3]int g0/0/0.1
[r3-GigabitEthernet0/0/1.1]dot1q termination vid 2
[r3-GigabitEthernet0/0/1.1]ip address 192.168.1.1 24
[r3-GigabitEthernet0/0/1.1]dhcp select global
[r3-GigabitEthernet0/0/1.1]arp broadcast enable
[r3]int g0/0/1.2
[r3-GigabitEthernet0/0/1.2]dot1q termination vid 3
[r3-GigabitEthernet0/0/1.2]ip address 192.168.2.1 24
[r3-GigabitEthernet0/0/1.2]dhcp select global
[r3-GigabitEthernet0/0/1.2]arp broadcast enable
[r3-GigabitEthernet0/0/1.2]quit
[r3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r3]ip pool 1
Info: It's successful to create an IP address pool.
[r3-ip-pool-1]network 192.168.1.0 mask 255.255.255.0
[r3-ip-pool-1]gateway-list 192.168.1.1
[r3-ip-pool-1]dns-list 8.8.8.8 114.114.114.114
[r3-ip-pool-1]quit
[r3]ip pool 2
Info: It's successful to create an IP address pool.
[r3-ip-pool-2]network 192.168.2.0 mask 255.255.255.0
[r3-ip-pool-2]gateway-list 192.168.2.1
[r3-ip-pool-2]dns-list 8.8.8.8 114.114.114.114
r123
[r1]ospf 100 router-id 1.1.1.1
[r1-ospf-100]area 0
[r1-ospf-100-area-0.0.0.0]network 0.0.0.0 255.255.255.255
[r1-ospf-100-area-0.0.0.0]quit
4.验证