HCIP OSPF实验1

1.给各个路由接口配置IP地址

[r1]int s4/0/0
[r1-Serial4/0/0]ip add 12.1.1.1 24
[r1-Serial4/0/0]q
[r1]int lo0
[r1-LoopBack0]ip add 1.1.1.1 24

[r2]int s4/0/1
[r2-Serial4/0/1]ip add 12.1.1.2 24
[r2-Serial4/0/1]int s4/0/0
[r2-Serial4/0/0]ip add 23.1.1.1 24
[r2-Serial4/0/0]int lo0
[r2-LoopBack0]ip add 2.2.2.2 24

[r3]int s4/0/1
[r3-Serial4/0/1]ip add 23.1.1.2 24
[r3-Serial4/0/1]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add 34.1.1.1 24
[r3-GigabitEthernet0/0/0]int lo0
[r3-LoopBack0]ip add 3.3.3.3 24

[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip add 34.1.1.2 24
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]ip add 45.1.1.1 24
[r4-GigabitEthernet0/0/1]int g0/0/2
[r4-GigabitEthernet0/0/2]ip add 46.1.1.1 24

[r5]int g0/0/0
[r5-GigabitEthernet0/0/0]ip add 45.1.1.2 24
[r5-GigabitEthernet0/0/0]int lo0
[r5-LoopBack0]ip add 5.5.5.5 24

[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip add 46.1.1.2 24
[r6-GigabitEthernet0/0/0]int lo0
[r6-LoopBack0]ip add 6.6.6.6 24

 2.R1-R2之间ppp的pap单向认证

主认证方
[r1]aaa
[r1-aaa]local-user hcip password cipher huawei
Info: Add a new user.
[r1-aaa]local-user hcip service-type ppp
[r1-aaa]q
[r1]int s4/0/0
[r1-Serial4/0/0]ppp authentication-mode pap
被认证方
[r2]int s4/0/0
[r2-Serial4/0/0]link-protocol ppp	
[r2-Serial4/0/0]ppp pap local-user hcip password cipher huawei

3.R2-R3之间ppp的chap双向认证

[r2]aaa
[r2-aaa]local-user hcip password cipher huawei
Info: Add a new user.	
[r2-aaa]local-user hcip service-type ppp
[r2-Serial4/0/0]link-protocol ppp
[r2-Serial4/0/0]ppp authentication-mode chap

[r3]int s4/0/1
[r3-Serial4/0/1]link-protocol ppp
[r3-Serial4/0/1]ppp chap user hcip
[r3-Serial4/0/1]ppp chap password cipher huawei
[r3]aaa	
[r3-aaa]local-user hcie password cipher huawei
Info: Add a new user.
[r3-aaa]local-user hcie service-type ppp
[r3-aaa]int s4/0/1
[r3-Serial4/0/1]link-protocol ppp	
[r3-Serial4/0/1]ppp authentication-mode chap


[r2-Serial4/0/0]link-protocol ppp
[r2-Serial4/0/0]ppp chap user hcie
[r2-Serial4/0/0]ppp chap password cipher huawei

4.r3-r5-r6之间使用MGRE，r3为hub端，r5 r6为spoke端；MGRE接口网络类型为BMA，spoke之间通信必须经过hub端

[r3]int t0/0/0
[r3-Tunnel0/0/0]ip add 10.1.1.1 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp
[r3-Tunnel0/0/0]source 34.1.1.1
[r3-Tunnel0/0/0]nhrp network-id 100
[r3-Tunnel0/0/0]nhrp entry multicast dynamic 

[r5]int t0/0/0
[r5-Tunnel0/0/0]ip add 10.1.1.2 24	
[r5-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r5-Tunnel0/0/0]source 45.1.1.2
[r5-Tunnel0/0/0]nhrp network-id 100
[r5-Tunnel0/0/0]nhrp entry 10.1.1.1 34.1.1.1 register 

[r6]int t0/0/0
[r6-Tunnel0/0/0]ip add 10.1.1.3 24
[r6-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r6-Tunnel0/0/0]source 46.1.1.2
[r6-Tunnel0/0/0]nhrp network-id 100
[r6-Tunnel0/0/0]nhrp entry 10.1.1.1 34.1.1.1 register 

5.启用ospf，修改r3 r5 r6接口类型为BMA

[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]network 12.1.1.1 0.0.0.0
 
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]network 12.1.1.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]network 23.1.1.1 0.0.0.0
 
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 23.1.1.2 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 10.1.1.1 0.0.0.0
[r3-Tunnel0/0/0]ospf network-type broadcast
 
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]area 0
[r5-ospf-1-area-0.0.0.0]network 5.5.5.5 0.0.0.0
[r5-ospf-1-area-0.0.0.0]network 10.1.1.2 0.0.0.0
[r5-Tunnel0/0/0]ospf dr-priority 0
[r5-Tunnel0/0/0]ospf network-type broadcast
 
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]area 0
[r6-ospf-1-area-0.0.0.0]network 6.6.6.6 0.0.0.0
[r6-ospf-1-area-0.0.0.0]network 10.1.1.3 0.0.0.0
[r6-Tunnel0/0/0]ospf dr-priority 0
[r6-Tunnel0/0/0]ospf network-type broadcast