IP复习 ospf 综合

已于 2022-08-10 16:42:00 修改
阅读量485 收藏
点赞数
分类专栏： ospf bgp 协议企业实战 文章标签： tcp/ip 蓝桥杯 拓扑学
于 2021-07-12 17:35:41 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_56229717/article/details/118679988
版权

题目

拓扑图

Please press enter to start cmd line!
################################################################################
########################
<Huawei>
Jul 11 2021 17:23:40-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[0]:Interface Serial1/
0/0 has been available. 
<Huawei>
Jul 11 2021 17:23:40-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[1]:Interface Serial1/
0/1 has been available. 
<Huawei>
Jul 11 2021 17:23:40-08:00 Huawei %%01DEV/4/ENTUP(l)[2]:2SA board[2] register su
ccess.
<Huawei>
Jul 11 2021 17:23:41-08:00 Huawei %%01IFNET/4/BOARD_ENABLE(l)[3]:Board 2 has bee
n available. 
<Huawei>
Jul 11 2021 17:23:41-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[4]:Interface Serial2/
0/0 has been available. 
<Huawei>
Jul 11 2021 17:23:41-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[5]:Interface Serial2/
0/1 has been available. 
<Huawei>
Jul 11 2021 17:23:41-08:00 Huawei %%01DEV/4/ENTUP(l)[6]:2SA board[3] register su
ccess.
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01IFNET/4/BOARD_ENABLE(l)[7]:Board 3 has bee
n available. 
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[8]:Interface Serial3/
0/0 has been available. 
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[9]:Interface Serial3/
0/1 has been available. 
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[10]:Interface Serial1/
0/0 has turned into UP state.
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[11]:Interface Serial1/
0/1 has turned into UP state.
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[12]:Interface Serial2/
0/0 has turned into UP state.
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[13]:Interface Serial2/
0/1 has turned into UP state.
<Huawei>
Jul 11 2021 17:23:42-08:00 Huawei %%01DEV/4/ENTUP(l)[14]:2SA board[4] register s
uccess.
<Huawei>
Jul 11 2021 17:23:43-08:00 Huawei %%01IFNET/4/BOARD_ENABLE(l)[15]:Board 4 has be
en available. 
<Huawei>
Jul 11 2021 17:23:43-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[16]:Interface Serial4
/0/0 has been available. 
<Huawei>
Jul 11 2021 17:23:43-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[17]:Interface Serial4
/0/1 has been available. 
<Huawei>
Jul 11 2021 17:23:45-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[18]:The line protoco
l PPP on the interface Serial1/0/1 has entered the UP state. 
<Huawei>
Jul 11 2021 17:23:45-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[19]:The line protoco
l PPP on the interface Serial1/0/0 has entered the UP state. 
<Huawei>
Jul 11 2021 17:23:45-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[20]:The line protoco
l PPP on the interface Serial2/0/0 has entered the UP state. 
<Huawei>
Jul 11 2021 17:23:45-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[21]:The line protoco
l PPP on the interface Serial2/0/1 has entered the UP state. 
<Huawei>sysname r4
        ^
Error: Unrecognized command found at '^' position.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]interf    
[r4]interface l    
[r4]interface LoopBack 0
[r4-LoopBack0]ip add 4.4.4.4 24
[r4-LoopBack0]q
[r4]interf    
[r4]interface 
              ^
Error:Incomplete command found at '^' position.
[r4]q
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]interf    
[r4]interface s    
[r4]interface Serial 1/0/0
[r4-Serial1/0/0]ip add 34.1.1.2 24
[r4-Serial1/0/0]
Jul 11 2021 17:28:05-08:00 r4 %%01IFNET/4/LINK_STATE(l)[22]:The line protocol PP
P IPCP on the interface Serial1/0/0 has entered the UP state. 
[r4-Serial1/0/0]q
[r4]interf    
[r4]interface se    
[r4]interface Serial 1/0/1
[r4-Serial1/0/1]ip add 54.1.1.2 24
[r4-Serial1/0/1]
Jul 11 2021 17:28:28-08:00 r4 %%01IFNET/4/LINK_STATE(l)[23]:The line protocol PP
P IPCP on the interface Serial1/0/1 has entered the UP state. 
[r4-Serial1/0/1]q
[r4]ser    
[r4]interf    
[r4]interface s    
[r4]interface Serial 2/0/0
[r4-Serial2/0/0]ip add 64.1.1.2 24
[r4-Serial2/0/0]
Jul 11 2021 17:29:02-08:00 r4 %%01IFNET/4/LINK_STATE(l)[24]:The line protocol PP
P IPCP on the interface Serial2/0/0 has entered the UP state. 
[r4-Serial2/0/0]q
[r4]interf    
[r4]interface s    
[r4]interface Serial 2/0/1
[r4-Serial2/0/1]ip add 74.1.1.2 24
[r4-Serial2/0/1]
Jul 11 2021 17:29:39-08:00 r4 %%01IFNET/4/LINK_STATE(l)[25]:The line protocol PP
P IPCP on the interface Serial2/0/1 has entered the UP state. 
[r4-Serial2/0/1]q
[r4]ip rou    
[r4]ip route-s    
[r4]ip route-static 0.0.0.0 0 

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]interf    
[r4]interface l    
[r4]interface LoopBack 0
[r4-LoopBack0]ip add 10.1.4.1 32
[r4-LoopBack0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ospf 1 rou    
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]ar    
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]netw    
[r4-ospf-1-area-0.0.0.0]network 4.4.4.4
                                        ^
Error:Incomplete command found at '^' position.
[r4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.0]netw    
[r4-ospf-1-area-0.0.0.0]network netw    
[r4-ospf-1-area-0.0.0.0]network 10.1.4.1 0.0.0.0
[r4-ospf-1-area-0.0.0.0]q
[r4-ospf-1]q
[r4]disp    
[r4]display osp    
[r4]display ospf p    
[r4]display ospf peer b    
[r4]display ospf peer brief 

     OSPF Process 1 with Router ID 4.4.4.4
          Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 ----------------------------------------------------------------------------
[r4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>ospf 1
    ^
Error: Unrecognized command found at '^' position.
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ospf 1 rou    
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]a    
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]undo 4.4.4.4 0.0.0.0
                             ^
Error: Unrecognized command found at '^' position.
[r4-ospf-1-area-0.0.0.0]area 0
[r4-ospf-1-area-0.0.0.0]undo netw    
[r4-ospf-1-area-0.0.0.0]undo network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.0]disp    
[r4-ospf-1-area-0.0.0.0]display t    
[r4-ospf-1-area-0.0.0.0]display thi    
[r4-ospf-1-area-0.0.0.0]display this 
[V200R003C00]
#
 area 0.0.0.0 
  network 10.1.4.1 0.0.0.0 
#
return
[r4-ospf-1-area-0.0.0.0]q
[r4-ospf-1]q
[r4]dis    
[r4]display osp    
[r4]display ospf p    
[r4]display ospf peer b    
[r4]display ospf peer brief 

     OSPF Process 1 with Router ID 4.4.4.4
          Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 ----------------------------------------------------------------------------
[r4]interf    
[r4]interface tun    
[r4]interface Tunnel 0/0/0
[r4-Tunnel0/0/0]ospf net    
[r4-Tunnel0/0/0]ospf network-type b    
[r4-Tunnel0/0/0]ospf network-type broadcast 
[r4-Tunnel0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]interf    
[r4]interface t    
[r4]interface Tunnel 0/0/0
[r4-Tunnel0/0/0]op    
[r4-Tunnel0/0/0]osp    
[r4-Tunnel0/0/0]ospf dr    
[r4-Tunnel0/0/0]ospf dr-priority 0
[r4-Tunnel0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on
 

ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.10, Neighbor
Event=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init) 
[r3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]interf    
[r3]interface g    
[r3]interface GigabitEthernet 0/0/0
[r3-GigabitEthernet0/0/0]ip add 10.1.123.3 24
Jul 11 2021 22:13:26-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]q
[r3]ospf 1 rou    
[r3]ospf 1 router-id 3.3.3.3
Info: The configuration succeeded. You need to restart the OSPF process to valid
ate the new router ID.
[r3-ospf-1]a    
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]netw    
[r3-ospf-1-area-0.0.0.1]network 10.1.123.3 0.0.0.0
[r3-ospf-1-area-0.0.0.1]
Jul 11 2021 22:16:17-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r3-ospf-1-area-0.0.0.1]
Jul 11 2021 22:16:17-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r3-ospf-1-area-0.0.0.1]
Jul 11 2021 22:16:17-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r3-ospf-1-area-0.0.0.1]
Jul 11 2021 22:16:17-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r3-ospf-1-area-0.0.0.1]
Jul 11 2021 22:16:17-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r3-ospf-1-area-0.0.0.1]
Jul 11 2021 22:16:17-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r3-ospf-1-area-0.0.0.1]
Jul 11 2021 22:16:17-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[7]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
[r3-ospf-1-area-0.0.0.1]q
[r3-ospf-1]q
[r3]disp    
[r3]display osp    
[r3]display ospf p    
[r3]display ospf peer b    
[r3]display ospf peer brief 

     OSPF Process 1 with Router ID 1.1.1.1
          Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          Tunnel0/0/0                      5.5.5.5          Full        
 0.0.0.0          Tunnel0/0/0                      6.6.6.6          Full        
 0.0.0.0          Tunnel0/0/0                      7.7.7.7          Full        
 0.0.0.1          GigabitEthernet0/0/0             2.2.2.2          Full        
 ----------------------------------------------------------------------------
[r3]
Jul 11 2021 22:18:20-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[8]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
[r3]
Jul 11 2021 22:19:16-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[9]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate re
ason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhell
o Received, NeighborChangeTime=2021-07-11 22:19:16-08:00) 
[r3]
Jul 11 2021 22:19:16-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighb
orEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init) 
[r3]
Jul 11 2021 22:19:21-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 

[r3]
Jul 11 2021 22:19:21-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange) 
[r3]
Jul 11 2021 22:19:21-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng) 
[r3]
Jul 11 2021 22:19:21-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.1.10, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r3]
Jul 11 2021 22:20:30-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[15]:OSPF Rout
er id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaI
d=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1
.123.1.10) 
[r3]dis    
[r3]display osp    
[r3]display ospf p    
[r3]display ospf peer b    
[r3]display ospf peer brief 

     OSPF Process 1 with Router ID 1.1.1.1
          Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          Tunnel0/0/0                      5.5.5.5          Full        
 0.0.0.0          Tunnel0/0/0                      6.6.6.6          Full        
 0.0.0.0          Tunnel0/0/0                      7.7.7.7          Full        
 0.0.0.1          GigabitEthernet0/0/0             2.2.2.2          Full        
 ----------------------------------------------------------------------------
[r3]
Jul 11 2021 22:22:32-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[16]:OSPF Rout
er id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaI
d=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1
.123.1.10) 
[r3]
Jul 11 2021 22:24:34-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[17]:OSPF Rout
er id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaI
d=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1
.123.1.10) 
[r3]q
<r3>sa
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<r3>
Jul 11 2021 22:26:36-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[18]:OSPF Rout
er id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaI
d=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1
.123.1.10) 
<r3>
Jul 11 2021 22:28:38-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[19]:OSPF Rout
er id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaI
d=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1
.123.1.10) 
<r3>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r3>
<r3>
Jul 12 2021 02:00:11-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[0]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
<r3>
Jul 12 2021 02:02:13-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[1]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
<r3>
Jul 12 2021 02:04:15-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[2]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
<r3>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]interf    
[r3]interface g    
[r3]interface GigabitEthernet 0/0/2
[r3-GigabitEthernet0/0/2]tu    
[r3-GigabitEthernet0/0/2]q
[r3]ospf 1
[r3-ospf-1]are    
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]tub    
[r3-ospf-1-area-0.0.0.0]tub
Jul 12 2021 02:10:21-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[0]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
[r3-ospf-1-area-0.0.0.0]tub
[r3-ospf-1-area-0.0.0.0]tub
                        ^
Error: Unrecognized command found at '^' position.
[r3-ospf-1-area-0.0.0.0]stub
Error: Configuring the backbone area as a STUB area is prohibited.
[r3-ospf-1-area-0.0.0.0]stub no    
[r3-ospf-1-area-0.0.0.0]stub no-summary 
Error: Configuring the backbone area as a STUB area is prohibited.
[r3-ospf-1-area-0.0.0.0]
Jul 12 2021 02:12:23-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[1]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
[r3-ospf-1-area-0.0.0.0]stub no-summary
Error: Configuring the backbone area as a STUB area is prohibited.
[r3-ospf-1-area-0.0.0.0]
Jul 12 2021 02:14:25-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[2]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
[r3-ospf-1-area-0.0.0.0]
Jul 12 2021 02:16:27-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[3]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=1.1.1.1, AreaId
=1.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.123.1.10, PacketSrcIp=1.
123.1.10) 
[r3-ospf-1-area-0.0.0.0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on
 

截图

m0_56229717
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
华为服务器插网线后没有响应,用con口连接华为交换机没有反应，重启之后出现以下信息后...
weixin_34867823的博客
08-12 2298
该楼层疑似违规已被系统折叠隐藏此楼查看此楼Apr 29 2014 15:56:49-05:13 Quidway SRM/3/POWERFAULT:OID 1.3.6.1.4.1.2011.5.25.129.2.1.9 Power is fault.(EntityPhysicalIndex=67108873, BaseTrapSeverity=3, BaseTrapProbableCause=67...
计算机网络之广域网基础以及华为eNSP实验配置
爱学习的JackYang的博客
08-02 4558
计算机网络 广域网 华为 eNSP PPP协议 PPPOE协议 PAP认证 CHAP认证
eNSP的使用
weixin_30887919的博客
11-06 1747
1-进入华为路由器界面配置ipThe device is running!####################################Nov 1 2016 23:39:24-08:00 Huawei %%01IFNET/4/BOARD_ENABLE(l)[0]:Board 1 has been available. <Huawei>Nov 1 2016 23:39:2...
华为eNSP实践-Single-Area OSPF
liuchenbei的博客
09-01 491
通过双方交互LSR、LSU、LSAck报文完成。一共有两个状态机loading和Full： 邻居状态变为Loading之后，R1开始向R2发送LS request报文，请求那些在Exchange状态下通过DD报文发现的，而且在本地LSDB中没有的链路状态信息。 R2收到LS Request报文之后，向R1发送LS Update报文，在LS Update报文中，包含了那些被请求的链路状态的详细信息。R1收到LS Update报文之后，将邻居状态从Loading改变成Full。 R1向R2发送LS Ack报文
华为信息中心配置命令，很全
网络技术联盟站
12-19 3257
本文命令集合： display actived-alarm highest-level display channel display debugging display info-center display info-center filter-id display info-center logfile path display info-center rate-limit record display info-center rate-limit threshold display info-ce
HCIA第二天作业
weixin_63553597的博客
07-19 150
HCIA作业
路由与交换复习资料.zip
01-13
3. **路由协议的作用**：如RIP、OSPF、BGP等，用于动态更新和维护路由表，实现网络间的路由选择。 4. **VLAN（虚拟局域网）**：提高网络管理效率，隔离广播域，增强网络安全。 名词解析可能包括： 1. **ARP（地址...
复习综合实验-企业搭建1.rar
03-07
【标题】"复习综合实验-企业搭建1.rar" 涉及的是一个针对初学者的实践教程，旨在帮助网络管理、运维以及网络工程领域的新手掌握企业网络构建的基础知识。这个压缩包可能包含了一系列的配置文件和指导材料，特别是...
计算机通信网复习提纲
06-08
考试形式包括填空题、单项选择题、简答题和综合题，涵盖了从基本概念到高级应用的各种问题，旨在全面评估学生对计算机通信网的理解和应用能力。复习时，学生应深入理解每一层的功能、协议和服务，同时关注网络性能...
CCNA大型综合实验
07-28
1. **网络基础**：理解TCP/IP协议栈，包括OSI模型和TCP/IP五层模型，学习IP地址、子网掩码、默认网关和DNS的概念，以及如何分配和规划IP地址。 2. **路由与交换**：掌握Cisco IOS的基本操作，如CLI命令行界面，配置...
网络规划复习.docx
06-18
3. 路由协议：OSPF（开放最短路径优先）和RIP（路由信息协议）是两种常见的动态路由协议，用于在网络间传递路由信息，确保数据包正确传输。 4. 子网掩码：子网掩码用于确定IP地址的网络部分和主机部分，常见格式如...
HCIA DAY4
weixin_63553597的博客
07-22 305
HCIA初学
分析Packet Tracer抓取到的报文
qq_54856664的博客
05-26 1446
1. 基本信息 姓名 学号 班级 网络是否连通 能否正常抓取报文 蔡瑞鑫 202021121007 计算2011 是 是 2. 建立网络拓扑结构 正在上传…重新上传取消 3. 配置网络参数 3.1 客户端 正在上传…重新上传取消 3.2 服务端 正在上传…重新上传取消 正在上传…重新上传取消 4. 抓取报文并分析 4.1 概览 正在上传…重新上传取消 为上述报文进行归类，哪些序号的报文是做什么，举例： 报文1-3：DN
AR路由器log报错:‘OSPF Router id conflict is detected on interface‘
m0_48630574的博客
11-25 2700
2020年的出其不意的错误： （1）出错原因是：最开始配置的G0/0/0的地址默认成为了OSPF 的 route-id，后面发现路由器AR1的G0/0/0的ip地址配成了AR7的G0/0/2的IP，把AR1的G0/0/0接口的IP重新配置后，出现了'OSPF Router id conflict is detected on interface'这个错误提示。 （2）注意：在配置ospf或bgp时一定记得规划好route-id。一般是配置loopback的ip作为route-id。 （3）深入学习：.
三层无线组网实例
Sum
09-29 6121
题目： 三层无线组网实例 摘要 构建如图1-1所示的三层无线局域网，要求分离AC管理VLAN、AP管理VLAN和业务VLAN。要求实现802.1x认证,所有接人网络的用户账号和密码存放在Radius服务器上。由于eNSP中没有内置的AAA服务器,本实例中采用eNSP提供的Cloud云设备连接本地计算机，在本地计算机上安装一个WinRadius服务器，实现无线网络接人认证。 图1-1 三、实验内容 1.构建WinRadius服务器 配置本地计算机的Loopback网卡及IP地址; 配置WinRadius服务
华为服务器显示100错误,华为12708风扇狂转100%故障排除
weixin_39664774的博客
08-10 1834
巡检机房发现华为12708 风扇狂转，登陆后台，有报警显示 xg2/0/8#Jan 4 2021 06:54:56+08:00 HUAWEI-S12708-Master BASETRAP/3/OPTPWRABNORMAL: OID 1.3.6.1.4.1.2011.5.25.129.2.17.1 Optical module power is abnormal. (EntityPhysicalI...
2021-08-09
weixin_54494152的博客
08-10 143
实验要求： 1.如图连接拓扑，合理规划IP地址，R1、R5、R6、R7各种创建一个环回，IP地址分别为 192.168.1.0、192.168.2.0、192.168.3.0、192.168.4.0 2.AS100内使用IGP协议为OSPF，如图运行动态路由协议 3.要求R1-R5之间启用MPLSVPN;R6-R7之间启用MPLSVPN; 4.将两条VPN进行合并 5.R6-R7之间使用OSPF协议，要求R6-R7之间的私有IP地址通信优先使用MPLS 一、topo如下： ...
静态路由实验
liuyijunyyds的博客
01-04 452
静态路由实验
华为eNSP提示Feb 19 2021 14:14:45-08:00 S1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1
热门推荐
qq_42880266的博客
02-19 1万+
Feb 19 2021 14:13:57-08:00 R1 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern .接口编号et0/0/0已经变为UP状态。 Feb 19 2021 14:14:45-08:00 S1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 4,
ospf综合实验案例
最新发布
09-12
在一个OSPF综合实验案例中，可以模拟一个复杂的网络拓扑，包括多个路由器和连接它们的链路。假设有5个路由器A、B、C、D和E，它们之间通过不同的链路相连。 首先，需要配置每个路由器上的OSPF进程，并为它们分配一个...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值