IP复习第十四天bgp

 题目要求

 

 

 

 

 

 

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]inter    
[r2]interface f    
[r2]interface g    
[r2]interface GigabitEthernet 0/0/2
[r2-GigabitEthernet0/0/2]ip add 192.168.2.1 24
Jul 24 2021 17:00:42-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r2-GigabitEthernet0/0/2]q
[r2]interf    
[r2]interface l    
[r2]interface LoopBack 0
[r2-LoopBack0]ip add 2.2.2.2 24
[r2-LoopBack0]q
[r2]interf    
[r2]interface g    
[r2]interface GigabitEthernet 0/0/1
[r2-GigabitEthernet0/0/1]ip add 12.1.1.2 24
Jul 24 2021 17:01:08-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]1
                         ^
Error: Unrecognized command found at '^' position.
[r2-GigabitEthernet0/0/1]inter    
[r2-GigabitEthernet0/0/1]int    
[r2-GigabitEthernet0/0/1]q
[r2]interf    
[r2]interface g    
[r2]interface GigabitEthernet 0/0/0
[r2-GigabitEthernet0/0/0]ip add 23.1.1.1 24
[r2-GigabitEthernet0/0/0]
Jul 24 2021 17:01:29-08:00 r2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r2>
<r2>ping 23.1.1.2
  PING 23.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 23.1.1.2: bytes=56 Sequence=1 ttl=255 time=40 ms
    Reply from 23.1.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 23.1.1.2: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 23.1.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 23.1.1.2: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 23.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/26/40 ms

<r2>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]bgp 2
[r2-bgp]peer 12.1.1.1 as-num    
[r2-bgp]peer 12.1.1.1 as-number 1
[r2-bgp]q
[r2]
Jul 24 2021 17:23:59-08:00 r2 %%01BGP/3/STATE_CHG_UPDOWN(l)[0]:The status of the
 peer 12.1.1.1 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, St
ateChangeReason=Up)  
[r2]bgp 2
[r2-bgp]peer 3.3.3.3 as-nu    
[r2-bgp]peer 3.3.3.3 as-number 2
[r2-bgp]peer 3.3.3.3 con    
[r2-bgp]peer 3.3.3.3 connect-interface l    
[r2-bgp]peer 3.3.3.3 connect-interface LoopBack 0
[r2-bgp]q
[r2]disp    
[r2]display bpg p    
[r2]display bpg pee    
[r2]display bpg peer
            ^
Error: Wrong parameter found at '^' position.
[r2]display bgp peer

 BGP local router ID : 192.168.2.1
 Local AS number : 2
 Total number of peers : 2          Peers in established state : 1

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State Pre
fRcv

  3.3.3.3         4           2        0        0     0 00:03:36        Idle    
   0
  12.1.1.1        4           1        6        6     0 00:04:38 Established    
   0
[r2]ospf 1 rou    
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]netw    
[r2-ospf-1]a 0
[r2-ospf-1-area-0.0.0.0]netw    
[r2-ospf-1-area-0.0.0.0]network 12.1.1.2 255.255.255.255
[r2-ospf-1-area-0.0.0.0]netw    
[r2-ospf-1-area-0.0.0.0]network 192.168.2.1 255.255.255.255
[r2-ospf-1-area-0.0.0.0]netw    
[r2-ospf-1-area-0.0.0.0]network 2.2.2.2 255.255.255.255
[r2-ospf-1-area-0.0.0.0]netw    
[r2-ospf-1-area-0.0.0.0]network 23.1.1.1 255.255.255.255
[r2-ospf-1-area-0.0.0.0]
Jul 24 2021 17:33:34-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.23, NeighborE
vent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r2-ospf-1-area-0.0.0.0]
Jul 24 2021 17:33:42-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.23, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r2-ospf-1-area-0.0.0.0]
Jul 24 2021 17:33:42-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.23, NeighborE
vent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchan
ge) 
[r2-ospf-1-area-0.0.0.0]
Jul 24 2021 17:33:42-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.23, NeighborE
vent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
 
[r2-ospf-1-area-0.0.0.0]
Jul 24 2021 17:33:42-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.23, NeighborE
vent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r2-ospf-1-area-0.0.0.0]
Jul 24 2021 17:34:36-08:00 r2 %%01BGP/3/STATE_CHG_UPDOWN(l)[6]:The status of the
 peer 3.3.3.3 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, Sta
teChangeReason=Up)  
[r2-ospf-1-area-0.0.0.0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]disp    
[r2]display ospf p    
[r2]display ospf peer b    
[r2]display ospf peer brief 

     OSPF Process 1 with Router ID 2.2.2.2
          Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/0             3.3.3.3          Full        
 ----------------------------------------------------------------------------
[r2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]disp    
[r2]display bgp    
[r2]display bgp p    
[r2]display bgp peer

 BGP local router ID : 192.168.2.1
 Local AS number : 2
 Total number of peers : 2          Peers in established state : 2

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State Pre
fRcv

  3.3.3.3         4           2       17       17     0 00:15:20 Established    
   0
  12.1.1.1        4           1       27       27     0 00:25:58 Established    
   0
[r2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r2>
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]dis    
[r2]display bgp    
[r2]display bgp rou    
[r2]display bgp routing-table 

 BGP Local router ID is 192.168.2.1 
 Status codes: * - valid, > - best, d - damped,
               h - history,  i - internal, s - suppressed, S - Stale
               Origin : i - IGP, e - EGP, ? - incomplete

 Total Number of Routes: 1
      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 *>   192.168.1.0        12.1.1.1        0                     0      1i
[r2]peer 3.3.
    ^
Error: Unrecognized command found at '^' position.
[r2]bgp 2
[r2-bgp]peer 3.3.3.3 nex    
[r2-bgp]peer 3.3.3.3 next-hop-l    
[r2-bgp]peer 3.3.3.3 next-hop-local 
[r2-bgp]peer 4.4.4.4 as-n    
[r2-bgp]peer 4.4.4.4 as-number 2
[r2-bgp]peer 4.4.4.4 con    
[r2-bgp]peer 4.4.4.4 connect-interface l    
[r2-bgp]peer 4.4.4.4 connect-interface LoopBack 0
[r2-bgp]
Jul 24 2021 18:05:30-08:00 r2 %%01BGP/3/STATE_CHG_UPDOWN(l)[0]:The status of the
 peer 4.4.4.4 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, Sta
teChangeReason=Up)  
[r2-bgp]netw    
[r2-bgp]network 192.168.2.0
[r2-bgp]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on