本文档详细记录了一次三层架构的网络配置实验，包括在sw1,sw2,sw3和sw4上设置eth-trunk，创建VLAN，配置STP，设定主备根桥，启用SVI，配置VRRP，实现DHCP服务，以及设置OSPF路由，并进行了链路追踪和汇总，最后防止了环路。实验涵盖了网络基础设施和高可用性的关键配置。"
139034871,17243493,深度Q-learning在自动化制造中的应用实践,"['深度学习', '强化学习', '自动化制造', '神经网络', '大数据']
在sw1,sw2上做eth-trunk
[sw1]int Eth-Trunk 0
[sw1]int g0/0/2
[sw1-GigabitEthernet0/0/2]eth-trunk 0
[sw1]int g0/0/3
[sw1-GigabitEthernet0/0/3]eth-trunk 0
[sw2]int Eth-Trunk 0
[sw2]int g0/0/2
[sw2-GigabitEthernet0/0/2]eth-trunk 0
[sw2]int g0/0/3
[sw2-GigabitEthernet0/0/3]eth-trunk 0
创建VLAN
[sw1]vlan 2
在eth-trunk 0,g0/0/4,g0/0/5上做trunk
[sw1]port-group group-member g0/0/4 to g0/0/5 Eth-Trunk 0
[sw1-port-group]port link-type trunk
[sw1-port-group]port trunk allow-pass vlan 2
[sw2]vlan 2
[sw2]port-group group-member g0/0/6 to g0/0/7 Eth-Trunk 0
[sw2-port-group]port link-type trunk
[sw2-port-group]port trunk allow-pass vlan 2
划分VLAN，将g0/0/2放在VLAN2
[sw3]vlan 2
[sw3]int g0/0/2
[sw3-GigabitEthernet0/0/2]port link-type access
[sw3-GigabitEthernet0/0/2]port default vlan 2
在g0/0/4,g0/0/7上做trunk
[sw3]port-group group-member g0/0/4 g0/0/7
[sw3-port-group]port link-type trunk
[sw3-port-group]port trunk allow-pass vlan 2
划分VLAN，将g0/0/2放在VLAN2
[sw4]vlan 2
[sw4]int g0/0/2
[sw4-GigabitEthernet0/0/2]port link-type access
[sw4-GigabitEthernet0/0/2]port default vlan 2
在g0/0/5,g0/0/6上做trunk
[sw4]port-group group-member g0/0/5 to g0/0/6
[sw4-port-group]port link-type trunk
[sw4-port-group]port trunk allow-pass vl
最低0.47元/天 解锁文章
805
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
