eNSP 单臂路由

---

构建拓扑图

配置PC机IP地址信息

PC1

PC2

PC3

配置LSW1

sys
[Huawei]un in en
[Huawei]vlan batch 10 20 30
[Huawei]int g0/0/2
[Huawei-GigabitEthernet0/0/2]port link-type access #端口类型设置为access
[Huawei-GigabitEthernet0/0/2]port default vlan 10
[Huawei-GigabitEthernet0/0/2]int g0/0/3
[Huawei-GigabitEthernet0/0/3]port link-type access
[Huawei-GigabitEthernet0/0/3]port default vlan 20
[Huawei-GigabitEthernet0/0/3]int g0/0/4
[Huawei-GigabitEthernet0/0/4]port link-type access
[Huawei-GigabitEthernet0/0/4]port default vlan 30
[Huawei-GigabitEthernet0/0/4]int g0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[Huawei-GigabitEthernet0/0/1]q
[Huawei]sysname SW1
[SW1]q
save

配置路由器R1

sys
[Huawei]un in en

划分子接口

[Huawei]int g0/0/1.1
[Huawei-GigabitEthernet0/0/1.1]ip add 192.168.1.254 24
[Huawei-GigabitEthernet0/0/1.1]int g0/0/1.2
[Huawei-GigabitEthernet0/0/1.1]dot1q termination vid 10
[Huawei-GigabitEthernet0/0/1.1]int g0/0/1.2
[Huawei-GigabitEthernet0/0/1.2]ip add 192.168.2.254 24
[Huawei-GigabitEthernet0/0/1.2]dot1q termination vid 20
[Huawei-GigabitEthernet0/0/1.2]int g0/0/1.3
[Huawei-GigabitEthernet0/0/1.3]ip add 192.168.3.254 24
[Huawei-GigabitEthernet0/0/1.3]dot1q termination vid 30

开启ARP

[Huawei-GigabitEthernet0/0/1.3]arp broadcast enable
[Huawei-GigabitEthernet0/0/1.3]int g0/0/1.2
[Huawei-GigabitEthernet0/0/1.2]arp broadcast enable
[Huawei-GigabitEthernet0/0/1.2]int g0/0/1.1
[Huawei-GigabitEthernet0/0/1.1]arp broadcast enable
[Huawei-GigabitEthernet0/0/1.1]quit
[Huawei]sysname
[Huawei]sysname R1
[R1]q
save

测试连通性

pc1 ping pc2

pc1 ping pc3

pc2 ping pc3