Hcip第11次作业

1.如图连接拓扑，合理规划IP地址，R1、R5、R6、R7各种创建一个环回，IP地址分别为192.168.1.0 、192.168.2.0、192.168.3.0、192.168.4.0

2.AS 100内使用IGP协议为OSPF ，如图运行动态路由协议

3.要求R1-R5之间启用MPLS VPN ； R6-R7之间启用MPLS VPN；

4.将两条VPN 进行合并

一、配置ip地址如下：

 

[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]lip add 12.0.0.1 24
[r1-GigabitEthernet0/0/0]ip add 12.0.0.1 24
[r1-GigabitEthernet0/0/0]int l0
[r1-LoopBack0]ip add 192.168.1.1 24
[r1-LoopBack0]

[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 23.0.0.1 24
[r2-GigabitEthernet0/0/0]int g0/0/2 
[r2-GigabitEthernet0/0/2]ip add 26.0.0.1 24
[r2-GigabitEthernet0/0/2]int l0
[r2-LoopBack0]ip add 2.2.2.2 32

[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add 23.0.0.2 24
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add 34.0.0.1 24
[r3-GigabitEthernet0/0/1]int l0
[r3-LoopBack0]ip add 3.3.3.3 32
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip add 34.0.0.2 24
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]ip add 45.0.0.1 24
[r4-GigabitEthernet0/0/1]int g0/0/2
[r4-GigabitEthernet0/0/2]ip add 47.0.0.1 24
[r4-GigabitEthernet0/0/2]int l0
[r4-LoopBack0]ip add 4.4.4.4 32


[r5]int g0/0/0
[r5-GigabitEthernet0/0/0]ip add 45.0.0.2 24
[r5-GigabitEthernet0/0/0]int l0
[r5-LoopBack0]ip add 192.168.2.0 24
Error: The specified IP address is invalid.
[r5-LoopBack0]ip add 192.168.2.1 24

[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip add 26.0.0.2 24
[r6-GigabitEthernet0/0/0]int g0/0/1
[r6-GigabitEthernet0/0/1]ip add 67.0.0.1 24
[r6-GigabitEthernet0/0/1]int l0
[r6-LoopBack0]ip add 192.168.3.1 24


[r7]int g0/0/0
[r7-GigabitEthernet0/0/0]ip add 47.0.0.2 24
[r7-GigabitEthernet0/0/0]int g0/0/1
[r7-GigabitEthernet0/0/1]ip add 67.0.0.2 24
[r7-GigabitEthernet0/0/1]int l0
[r7-LoopBack0]ip add 192.168.4.1 24

二、AS 100内使用IGP协议为OSPF ，如图运行动态路由协议

[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]a 0	
[r2-ospf-1-area-0.0.0.0]network 23.0.0.0 255.255.255.0
[r2-ospf-1-area-0.0.0.0]network 2.2.2.2 255.255.255.0	
[r2-LoopBack0]ospf network-type broadcast

[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]a 0	
[r3-ospf-1-area-0.0.0.0]network 23.0.0.0 255.255.255.0
[r3-ospf-1-area-0.0.0.0]network 34.0.0.0 255.255.255.0
[r3-ospf-1-area-0.0.0.0]network 3.3.3.3 255.255.255.0
[r3-ospf-1-area-0.0.0.0]q
[r3-ospf-1]q
[r3]int l0
[r3-LoopBack0]ospf network-type broadcast 

[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]a 0
[r4-ospf-1-area-0.0.0.0]network 34.0.0.0 255.255.255.0
[r4-ospf-1-area-0.0.0.0]network 4.4.4.4 255.255.255.0
[r4-ospf-1]q
[r4]int l0
[r4-LoopBack0]ospf network-type broadcast 

三、要求R1-R5之间启用MPLS VPN ； R6-R7之间启用MPLS VPN

  R1-R5

[r1]rip 1
[r1-rip-1]v 2
[r1-rip-1]n	
[r1-rip-1]network 192.168.1.0
[r1-rip-1]network 12.0.0.0

[r5]rip 1
[r5-rip-1]n	
[r5-rip-1] v 2
[r5-rip-1]n	
[r5-rip-1]network  45.0.0.0
[r5-rip-1]network 192.168.2.0


[r2]ip vpn-instance hcia
[r2-vpn-instance-aa]route-distinguisher 100:1
[r2-vpn-instance-aa-af-ipv4]vpn-target 1:1
 IVT Assignment result: 
Info: VPN-Target assignment is successful.
 EVT Assignment result: 
Info: VPN-Target assignment is successful.
[r2-vpn-instance-aa-af-ipv4]q
[r2-vpn-instance-aa]q
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip binding  vpn-instance aa
Info: All IPv4 related configurations on this interface are removed!
Info: All IPv6 related configurations on this interface are removed!
[r2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[r2-GigabitEthernet0/0/0]q
[r2]rip 1 vpn-instance hcia
[r2-rip-1]v 2
[r2-rip-1]n	
[r2-rip-1]network 12.0.0.0
[r2-rip-1]q
[r2]bgp 100
[r2-bgp]router-id 2.2.2.2
[r2-bgp]peer 4.4.4.4 as-num	
[r2-bgp]peer 4.4.4.4 as-number 100
[r2-bgp]peer 4.4.4.4 connect-interface l	
[r2-bgp]peer 4.4.4.4 connect-interface LoopBack 0
[r2-bgp]peer 4.4.4.4 next-hop-l	
[r2-bgp]peer 4.4.4.4 next-hop-local 	
[r2-bgp]ipv4-family vpnv4 unicast 
[r2-bgp-af-vpnv4]peer 4.4.4.4 en	
[r2-bgp-af-vpnv4]peer 4.4.4.4 enable 
[r2]bgp 100
[r2-bgp]ipv4-family vpn-instance hcia
[r2-bgp-hcia]import-route  rip 1
[r2]mpls lsr-id 2.2.2.2
[r2]mpls
Info: Mpls starting, please wait... OK!
[r2-mpls]mpls ldp
[r2-mpls-ldp]q
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]mpls
[r2-GigabitEthernet0/0/1]mpls ldp
[r2]rip 1
[r2-rip-1]imp	
[r2-rip-1]import-route bgp


[r3]mpls l	
[r3]mpls ls	
[r3]mpls lsr-id 3.3.3.3
[r3]mpls 
Info: Mpls starting, please wait... OK!
[r3-mpls]mpls ldp
[r3-mpls-ldp]int g0/0/0
[r3-GigabitEthernet0/0/0]mpls
[r3-GigabitEthernet0/0/0]mpls ldp
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]mpls
[r3-GigabitEthernet0/0/1]mpls ldp


[r4]rip 1 vpn-instance hcia
[r4-rip-1]v 2
[r4-rip-1]n	
[r4-rip-1]network 12.0.0.0
[r4-rip-1]q
[r4]rip 1 v hcia
[r4-rip-1]network 45.0.0.0
[r4]bgp 100
[r4-bgp]rou	
[r4-bgp]rout	
[r4-bgp]router-id 4.4.4.4
[r4-bgp]peer 2.2.2.2 as-num	
[r4-bgp]peer 2.2.2.2 as-number 100
[r4-bgp]peer 2.2.2.2 conn	
[r4-bgp]peer 2.2.2.2 connect-interface l	
[r4-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[r4-bgp]peer 2.2.2.2 n	
[r4-bgp]peer 2.2.2.2 next-hop-l	
[r4-bgp]peer 2.2.2.2 next-hop-local 
[r4-bgp]ipv	
[r4-bgp]ipv4-family vp	
[r4-bgp]ipv4-family vpnv4 un	
[r4-bgp]ipv4-family vpnv4 unicast 	
[r4-bgp-af-vpnv4]peer 2.2.2.2 enable 
[r4-bgp]ipv4-family vpn-instance hcia
[r4-bgp-hcia]imp	
[r4-bgp-hcia]import-route rip 1
[r4-bgp-hcia]q
[r4-bgp]q
[r4]mpls ls	
[r4]mpls lsr-id 4.4.4.4
[r4]mpls
[r4-mpls]mpls ldp
[r4-mpls-ldp]int g0/0/0
[r4-GigabitEthernet0/0/0]mpls
[r4-GigabitEthernet0/0/0]mpls ldp
[r4-GigabitEthernet0/0/0]rip 1
[r4-rip-1]imp	
[r4-rip-1]import-route bgp

结果如下：

 

R6-R7

[r6]ospf 200 riu	
[r6]ospf 200 rou	
[r6]ospf 200 router-id 6.6.6.6
[r6-ospf-200]a 0
[r6-ospf-200-area-0.0.0.0]n	
[r6-ospf-200-area-0.0.0.0]network 192.168.3.1 0.0.0.0
[r6-ospf-200-area-0.0.0.0]network 26.0.0.0 255.255.255.0

[r7]ospf 200
[r7-ospf-200]q
[r7]undo ospf 200
Warning: The OSPF process will be deleted. Continue? [Y/N]:y
[r7]ospf 200  rou	
[r7]ospf 200  router-id 7.7.7.7
[r7-ospf-200]a 0
[r7-ospf-200-area-0.0.0.0]n	
[r7-ospf-200-area-0.0.0.0]network 47.0.0.0 255.255.255.0
[r7-ospf-200-area-0.0.0.0]network 192.168.4.1 0.0.0.0

[r2]ip vpn-instance hcip
[r2-vpn-instance-hcip]route-distinguisher 100:2	
[r2-vpn-instance-hcip-af-ipv4]vpn-target 2:2 both 
[r2-GigabitEthernet0/0/2]ip binding vpn-instance hcip
[r2-GigabitEthernet0/0/2]ip add 26.0.0.1 24
[r2]ospf 200 vpn-instance hcip router-id 22.2.2.2
[r2-ospf-200]a 0
[r2-ospf-200-area-0.0.0.0]network 26.0.0.0 255.255.255.0 
[r2]bgp 100	
[r2-bgp]ipv4-family vpnv4 unicast 
[r2-bgp-af-vpnv4]peer 4.4.4.4 enable	
[r2-bgp]ipv4-family vpn-instance hcip
[r2-bgp-hcip]import-route ospf 200
[r2-bgp-hcip]ospf 200
[r2-ospf-200]imp	
[r2-ospf-200]import-route bgp

[r4]ip vpn-instance hcip
[r4-vpn-instance-hcip]route-distinguisher 100:2
[r4-vpn-instance-hcip-af-ipv4]vpn-target 2:2 both 
[r4-vpn-instance-hcip-af-ipv4]int g0/0/2
[r4-GigabitEthernet0/0/2]ip binding  vpn-instance  hcip
[r4-GigabitEthernet0/0/2]ip add 47.0.0.1 24
[r4-GigabitEthernet0/0/2]q
[r4]ospf 200 vp	
[r4]ospf 200 vpn-instance hcip rou	
[r4]ospf 200 vpn-instance hcip router-id 44.4.4.4
[r4-ospf-200]a 0
[r4-ospf-200-area-0.0.0.0]n	
[r4-ospf-200-area-0.0.0.0]network 47.0.0.0 255.255.255.0
[r4-ospf-200-area-0.0.0.0]q
[r4-ospf-200]bgp 100
[r4-bgp]ipv4-family vpnv4 unicast 
[r4-bgp-af-vpnv4]p	
[r4-bgp-af-vpnv4]peer 2.2.2.2 enable	
[r4-bgp]ipv4-family vpn-instance hcip	
[r4-bgp-hcip]import-route ospf 200
[r4-bgp-hcip]ospf 200
[r4-ospf-200]imp	
[r4-ospf-200]import-route bgp

结果如下：

 

四、合并

[r2]ip vpn-instance hcip
[r2-vpn-instance-hcip]vpn	
[r2-vpn-instance-hcip]vpn-t	
[r2-vpn-instance-hcip]vpn-target 1:1

[r4]ip vpn-instance hcip
[r4-vpn-instance-hcip]vpn	
[r4-vpn-instance-hcip]vpn-	
[r4-vpn-instance-hcip]vpn-target 1:1

结果如下：