rsync
rsync简介
rsync
是linux
系统下的数据镜像备份工具。使用快速增量备份工具Remote Sync
可以远程同步,支持本地复制,或者与其他SSH
、rsync
主机同步。
rsync特性
rsync
支持很多特性:
- 可以镜像保存整个目录树和文件系统
- 可以很容易做到保持原来文件的权限、时间、软硬链接等等
- 无须特殊权限即可安装
- 快速:第一次同步时
rsync
会复制全部内容,但在下一次只传输修改过的文件。rsync
在传输数据的过程中可以实行压缩及解压缩操作,因此可以使用更少的带宽 - 安全:可以使用
scp
、ssh
等方式来传输文件,当然也可以通过直接的socket
连接 - 支持匿名传输,以方便进行网站镜像
rsync命令
//Rsync的命令格式常用的有以下三种:
rsync [OPTION]... SRC DEST
rsync [OPTION]... SRC [USER@]HOST:DEST
rsync [OPTION]... [USER@]HOST:SRC DEST
//对应于以上三种命令格式,rsync有三种不同的工作模式:
(1)拷贝本地文件。当SRC和DES路径信息都不包含有单个冒号":"分隔符时就启动这种工作模式。如:
[root@jiang ~]# rsync -a zhang yue
[root@jiang ~]# ll
total 4
-rw-------. 1 root root 1081 Jun 27 19:41 anaconda-ks.cfg
-rw-r--r--. 1 root root 0 Sep 22 21:57 yue
-rw-r--r--. 1 root root 0 Sep 22 21:57 zhang
(2)使用一个远程shell程序(如rsh、ssh)来实现将本地机器的内容拷贝到远程机器。当DST路径地址包 \
含单个冒号":"分隔符时启动该模式。如:
[root@jiang ~]# rsync -a zhang root@192.168.205.150:/tmp/
root@192.168.205.150's password:
[root@localhost ~]# ls /tmp/
ks-script-wc3tkscq vmware-root_869-3988752892
vmware-root_815-4282170896 vmware-root_885-4021784556
vmware-root_868-2722632226 zhang
(3)使用一个远程shell程序(如rsh、ssh)来实现将远程机器的内容拷贝到本地机器。当SRC地址路径 \
包含单个冒号":"分隔符时启动该模式。如:
[root@jiang ~]# rsync -avz root@192.168.205.150:/root/yue /root/hehe
root@192.168.202.139's password:
receiving incremental file list
yue
sent 43 bytes received 97 bytes 56.00 bytes/sec
total size is 12 speedup is 0.09
[root@jiang ~]# ls
yue anaconda-ks.cfg zhang hehe
[root@jiang ~]# cat hehe
hello world
rsync+inotify
rsync
与传统的cp
、tar
备份方式相比,rsync
具有安全性高、备份迅速、支持增量备份等优点,通过rsync
可以解决对实时性要求不高的数据备份需求,例如定期的备份文件服务器数据到远端服务器,对本地磁盘定期做数据镜像等。
随着应用系统规模的不断扩大,对数据的安全性和可靠性也提出的更好的要求,rsync
在高端业务系统中也逐渐暴露出了很多不足,首先,rsync
同步数据时,需要扫描所有文件后进行比对,进行差量传输。如果文件数量达到了百万甚至千万量级,扫描所有文件将是非常耗时的。而且正在发生变化的往往是其中很少的一部分,这是非常低效的方式。其次,rsync
不能实时的去监测、同步数据,虽然它可以通过linux
守护进程的方式进行触发同步,但是两次触发动作一定会有时间差,这样就导致了服务端和客户端数据可能出现不一致,无法在应用故障时完全的恢复数据。基于以上原因,rsync
+inotify
组合出现了!
Inotify
是一种强大的、细粒度的、异步的文件系统事件监控机制,linux
内核从2.6.13
起,加入了Inotify
支持,通过Inotify
可以监控文件系统中添加、删除,修改、移动等各种细微事件,利用这个内核接口,第三方软件就可以监控文件系统下文件的各种变化情况,而inotify-tools
就是这样的一个第三方软件。
在前面有讲到,rsync可以实现触发式的文件同步,但是通过crontab
守护进程方式进行触发,同步的数据和实际数据会有差异,而inotify
可以监控文件系统的各种变化,当文件有任何变动时,就触发rsync
同步,这样刚好解决了同步数据的实时性问题。
部署rsync+inotify
环境说明
服务器类型 | IP地址 | 应用 | 操作系统 |
---|---|---|---|
源服务器(jiang) | 192.168.205.147 | rsync ;inotify-tools ;脚本 | centos8 |
目标服务器(localhost) | 192.168.205.150 | rsync | centos8 |
目标服务器(client)上做以下操作:
//首先关闭防火墙和selinux
[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]# systemctl disable firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@localhost ~]# setenforce 0
[root@localhost ~]# sed -ri 's/^(SELINUX=).*/\1disabled/g' /etc/selinux/config
//安装rsync服务端软件
[root@localhost ~]# yum -y install rsync rsync-daemon
//设置rsyncd.conf配置文件
[root@localhost ~]# vim /etc/rsyncd.conf
log file = /var/log/rsyncd.log # 日志文件位置,启动rsync后自动产生这个文件,无需提前创建
pidfile = /var/run/rsyncd.pid # pid文件的存放位置
lock file = /var/run/rsync.lock # 支持max connections参数的锁文件
secrets file = /etc/rsync.pass # 用户认证配置文件,里面保存用户名称和密码,必须手动创建这个文件
[gla_from_client] # 自定义同步名称
path = /tmp/ # rsync服务端数据存放路径,客户端的数据将同步至此目录
comment = sync gla from client #注释信息,可写可不写
uid = root # 设置rsync运行权限为root
gid = root # 设置rsync运行权限为root
port = 873 # 默认端口
ignore errors # 表示出现错误忽略错误
use chroot = no # 默认为true,修改为no,增加对目录文件软连接的备份
read only = no # 设置rsync服务端为读写权限
list = no # 不显示rsync服务端资源列表
max connections = 200 # 最大连接数
timeout = 600 # 设置超时时间
auth users = admin # 执行数据同步的用户名,可以设置多个,用英文状态下逗号隔开
hosts allow = 192.168.205.147 # 允许进行数据同步的客户端IP地址,可以设置多个,用英文状态下逗号隔开
hosts deny = 192.168.205.150 # 禁止数据同步的客户端IP地址,可以设置多个,用英文状态下逗号隔开
//创建用户认证文件,并设置文件权限
[root@localhost ~]# echo 'admin:123456' > /etc/rsync.pass
[root@localhost ~]# cat /etc/rsync.pass
admin:123456
//设置文件权限
[root@localhost ~]# chmod 600 /etc/rsync*
[root@localhost ~]# ll /etc/rsync*
-rw-------. 1 root root 887 Sep 22 22:23 /etc/rsyncd.conf
-rw-------. 1 root root 13 Sep 22 22:26 /etc/rsync.pass
//启动rsync服务并设置开机自启动
[root@localhost ~]# systemctl start rsyncd
[root@localhost ~]# systemctl enable rsyncd
Created symlink /etc/systemd/system/multi-user.target.wants/rsyncd.service → /usr/lib/systemd/system/rsyncd.service.
[root@localhost ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 0 5 0.0.0.0:873 0.0.0.0:*
LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
LISTEN 0 5 [::]:873 [::]:*
LISTEN 0 128 [::]:22 [::]:*
在源服务器上做以下操作:
//关闭防火墙与SELINUX
[root@jiang ~]# systemctl stop firewalld
[root@jiang ~]# systemctl disable --now firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@jiang ~]# setenforce 0
[root@jiang ~]# sed -ri 's/^(SELINUX=).*/\1disabled/g' /etc/selinux/config
//配置yum源
[root@jiang yum.repos.d]# curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-vault-8.5.2111.repo
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2495 100 2495 0 0 18759 0 --:--:-- --:--:-- --:--:-- 18759
[root@jiang yum.repos.d]# sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo
[root@jiang yum.repos.d]# cd
[root@jiang ~]# dnf clean all
33 files removed
[root@jiang ~]# dnf makecache
CentOS-8.5.2111 - Base - mirrors.aliyun.com 474 kB/s | 4.6 MB 00:09
CentOS-8.5.2111 - Extras - mirrors.aliyun.com 44 kB/s | 10 kB 00:00
CentOS-8.5.2111 - AppStream - mirrors.aliyun.co 453 kB/s | 8.4 MB 00:19
Metadata cache created.
//安装rsync服务端软件,只需要安装,不要启动,不需要配置
[root@jiang ~]# yum -y install rsync
//创建认证密码文件
[root@jiang ~]# echo '123456' > /etc/rsync.pass
[root@jiang ~]# cat /etc/rsync.pass
123456
//设置文件权限,只设置文件所有者具有读取、写入权限即可
[root@jiang ~]# chmod 600 /etc/rsync.pass
[root@jiang ~]# ll /etc/rsync.pass
-rw-------. 1 root root 7 Sep 22 22:46 /etc/rsync.pass
//在源服务器上创建测试目录,然后在源服务器运行以下命令
[root@jiang ~]# mkdir -pv /root/etc/test
mkdir: created directory '/root/etc'
mkdir: created directory '/root/etc/test'
[root@jiang ~]# rsync -avH --port 873 --progress --delete /root/etc/ admin@192.168.205.150::etc_from_client --password-file=/etc/rsync.pass
sending incremental file list
./
1
0 100% 0.00kB/s 0:00:00 (xfr#1, to-chk=2/4)
2
0 100% 0.00kB/s 0:00:00 (xfr#2, to-chk=1/4)
3
0 100% 0.00kB/s 0:00:00 (xfr#3, to-chk=0/4)
sent 212 bytes received 84 bytes 592.00 bytes/sec
total size is 0 speedup is 0.00
//安装inotify-tools工具,实时触发rsync进行同步
//查看服务器内核是否支持inotify
[root@jiang ~]# ll /proc/sys/fs/inotify
total 0
-rw-r--r--. 1 root root 0 Sep 22 22:53 max_queued_events
-rw-r--r--. 1 root root 0 Sep 22 22:53 max_user_instances
-rw-r--r--. 1 root root 0 Sep 22 22:53 max_user_watches
##如果有这三个max开头的文件则表示服务器内核支持inotify
//安装inotify-tools
//先下载epel
[root@Server ~]# dnf -y install epel-release
[root@Server ~]# dnf -y install inotify-tools
//写同步脚本,此步乃最最重要的一步,请慎之又慎。让脚本自动去检测我们制定的目录下 \
//文件发生的变化,然后再执行rsync的命令把它同步到我们的服务器端去
[root@jiang ~]# mkdir /scripts
[root@jiang ~]# touch /scripts/inotify.sh
[root@jiang ~]# chmod 755 /scripts/inotify.sh
[root@jiang ~]# ll /scripts/inotify.sh
-rwxr-xr-x. 1 root root 0 Sep 22 22:57 /scripts/inotify.sh
[root@jiang ~]# vim /scripts/inotify.sh
host=192.168.205.150 # 目标服务器的ip(备份服务器)
src=/alg # 在源服务器上所要监控的备份目录(此处可以自定义,但是要保证存在>)
des=gla_from_client # 自定义的模块名,需要与目标服务器上定义的同步名称一致
password=/etc/rsync.pass # 执行数据同步的密码文件
user=admin # 执行数据同步的用户名
inotifywait=/usr/bin/inotifywait
$inotifywait -mrq --timefmt '%Y%m%d %H:%M' --format '%T %w%f%e' -e modify,delete,create,attrib $src \
| while read files;do
rsync -avzP --delete --timeout=100 --password-file=${password} $src $user@$host::$des
echo "${files} was rsynced" >>/tmp/rsync.log 2>&1
done
//启动脚本
[root@jiang ~]# nohup bash /scripts/inotify.sh &
[1] 11168
[root@jiang ~]# nohup: ignoring input and appending output to 'nohup.out'
//创建新的文件
//创建新的文件
[root@jiang ~]# echo 'hello world' > /yue/hehe
//查看同步文件
[root@localhost ~]# cat /etmp/yue/hehe
hello world
设置脚本开机自动启动:
[root@jiang ~]# chmod +x /etc/rc.d/rc.local
[root@jiang ~]# echo 'nohup /bin/bash /scripts/inotify.sh' >> /etc/rc.d/rc.local[root@jiang ~]# tail /etc/rc.d/rc.local
#
# In contrast to previous versions due to parallel execution during boot
# this script will NOT be run after all other services.
#
# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure
# that this script will be executed during boot.
touch /var/lock/subsys/local
nohup /bin/bash /scripts/inotify.sh