nginx做负载均衡服务器，配置动静分离
文章目录
题目
后端RS服务器⼀台部署LNMP(nginx1.22+mysql8.0+php8.1)，⼀台部署httpd。
要求nginx和php使⽤编译安装
最后要通过访问nginx负载均衡服务器的IP看到动静分离的效
果。
环境说明
| 主机名 | IP地址 | 安装服务 |
|---|---|---|
| node1 | 192.168.205.144 | lnmp，动态资源 |
| node2 | 192.168.205.147 | nginx，静态资源 |
| node3 | 192.168.205.150 | httpd，做负载均衡 |
关闭所有主机的防火墙
[root@node1 ~]# systemctl stop firewalld
[root@node1 ~]# systemctl disable firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@node1 ~]# setenforce 0
[root@node1 ~]# sed -ri 's/^(SELINUX=).*/\1disabled/g' /etc/selinux/config
[root@node2 ~]# systemctl stop firewalld
[root@node2 ~]# systemctl disable firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@node2 ~]# setenforce 0
[root@node2 ~]# sed -ri 's/^(SELINUX=).*/\1disabled/g' /etc/selinux/config
[root@node3 ~]# systemctl stop firewalld
[root@node3 ~]# systemctl disable firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@node3 ~]# setenforce 0
[root@node3 ~]# sed -ri 's/^(SELINUX=).*/\1disabled/g' /etc/selinux/config
在node1主机上部署lnmp，在动态资源
源码安装nginx
//上传软件包
[root@node1 ~]# ls
anaconda-ks.cfg nginx-1.22.0.tar.gz
//创建系统用户nginx
[root@node1 ~]# useradd -rMs /sbin/nologin nginx
//安装依赖环境
[root@node1 ~]# dnf -y groups mark install 'Development Tools'
[root@node1 ~]# dnf -y install pcre-devel openssl openssl-devel gd-devel gcc gcc-c++ make
//创建日志存放目录
[root@node1 ~]# mkdir -p /var/log/nginx
[root@node1 ~]# chown -R nginx.nginx /var/log/nginx/
[root@node1 ~]# ll -d /var/log/nginx/
drwxr-xr-x. 2 nginx nginx 6 Oct 19 14:57 /var/log/nginx/
//编译安装
[root@node1 ~]# tar xf nginx-1.22.0.tar.gz
[root@node1 ~]# cd nginx-1.22.0
[root@node1 nginx-1.22.0]# ./configure \
> --prefix=/usr/local/nginx \
> --user=nginx \
> --group=nginx \
> --with-debug \
> --with-http_ssl_module \
> --with-http_realip_module \
> --with-http_image_filter_module \
> --with-http_gunzip_module \
> --with-http_gzip_static_module \
> --with-http_stub_status_module \
> --http-log-path=/var/log/nginx/access.log \
> --error-log-path=/var/log/nginx/error.log
[root@node1 nginx-1.22.0]# make
[root@node1 nginx-1.22.0]# make install
//配置环境变量
[root@node1 ~]# echo 'export PATH=/usr/local/nginx/sbin:$PATH' > /etc/profile.d/nginx.sh
[root@node1 ~]# source /etc/profile.d/nginx.sh
//启动nginx
[root@node1 ~]# nginx
[root@node1 ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 0 128 0.0.0.0:80 0.0.0.0:*
LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
LISTEN 0 128 [::]:22 [::]:*
访问
yum安装MySQL
//安装yum源命令
[root@node1 ~]# ls
anaconda-ks.cfg nginx-1.22.0
mysql80-community-release-el7-5.noarch.rpm nginx-1.22.0.tar.gz
[root@node1 ~]# rpm -Uvh mysql80-community-release-el7-5.noarch.rpm
//检查是否已经安装好yum源
[root@node1 ~]# yum repolist enabled | grep "mysql.*-community.*"
Failed to set locale, defaulting to C.UTF-8
mysql-connectors-community MySQL Connectors Community
mysql-tools-community MySQL Tools Community
mysql80-community MySQL 8.0 Community Server
[root@node1 ~]# yum module disable mysql
//安装MySQL
[root@node1 ~]# yum -y install mysql-community-server
//启动MySQL
[root@node1 ~]# systemctl start mysqld
[root@node1 ~]# systemctl enable mysqld
Created symlink /etc/systemd/system/multi-user.target.wants/mysqld.service → /usr/lib/systemd/system/mysqld.service.
[root@node1 ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 0 128 0.0.0.0:80 0.0.0.0:*
LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
LISTEN 0 70 *:33060 *:*
LISTEN 0 128 *:3306 *:*
LISTEN 0 128 [::]:22 [::]:*
//查看初始密码
[root@node1 ~]# grep 'temporary password' /var/log/mysqld.log
2022-10-19T08:24:34.348046Z 6 [Note] [MY-010454] [Server] A temporary password is generated for root@localhost: .Cr5kaHvn>*3
//登录数据库修改密码
[root@node1 ~]# mysql -uroot -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 8
Server version: 8.0.31
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> ALTER USER 'root'@'localhost' IDENTIFIED BY 'Jiang123!';
Query OK, 0 rows affected (0.00 sec)
mysql> exit
Bye
源码安装PHP
//上传并解压
[root@node1 ~]# ls
anaconda-ks.cfg nginx-1.22.0.tar.gz
mysql80-community-release-el7-5.noarch.rpm php-8.1.11.tar.gz
nginx-1.22.0
[root@node1 ~]# tar xf php-8.1.11.tar.gz
//配置网络源
[root@node1 ~]# dnf -y install epel-release
//安装依赖包
[root@node1 ~]# dnf -y install sqlite-devel make wget libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel libcurl curl-devel libcurl-devel libicu-devel libjpeg libjpeg-devel libpng libpng-devel openldap-devel pcre-devel freetype freetype-devel gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel libxslt libxslt-devel mhash mhash-devel php-mysqlnd --allowerasing oniguruma --skip-broken --nobest
[root@node1 ~]# yum -y install libsqlite3x-devel libxml2-devel libzip-devel
[root@node1 ~]# dnf --enablerepo=powertools install oniguruma-devel
[root@node1 php-8.1.11]# ./configure --prefix=/usr/local/php8 \
--with-config-file-path=/etc \
--enable-fpm \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-soap \
--with-openssl \
--enable-bcmath \
--with-iconv \
--with-bz2 \
--enable-calendar \
--with-curl \
--enable-exif \
--enable-ftp \
--enable-gd \
--with-jpeg \
--with-zlib-dir \
--with-freetype \
--with-gettext \
--enable-json \
--enable-mbstring \
--enable-pdo \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-readline \
--enable-shmop \
--enable-simplexml \
--enable-sockets \
--with-zip \
--enable-mysqlnd-compression-support \
--with-pear \
--enable-pcntl \
--enable-posix
[root@node1 php-8.1.11]# make
[root@node1 php-8.1.11]# make install
//配置环境变量
[root@node1 php-8.1.11]# echo 'export PATH=/usr/local/php8/bin:$PATH' > /etc/profile.d/php8.sh
[root@node1 php-8.1.11]# source /etc/profile.d/php8.sh
[root@node1 php-8.1.11]# which php
/usr/local/php8/bin/php
[root@node1 php-8.1.11]# php -v
PHP 8.1.11 (cli) (built: Oct 19 2022 16:59:13) (NTS)
Copyright (c) The PHP Group
Zend Engine v4.1.11, Copyright (c) Zend Technologies
//配置php-fpm
[root@node1 php-8.1.11]# cp php.ini-production /etc/php.ini
cp: overwrite '/etc/php.ini'? y
[root@node1 php-8.1.11]# cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
[root@node1 php-8.1.11]# chmod +x /etc/init.d/php-fpm
[root@node1 php-8.1.11]# cp /usr/local/php8/etc/php-fpm.conf.default /usr/local/php8/etc/php-fpm.conf
[root@node1 php-8.1.11]# cp /usr/local/php8/etc/php-fpm.d/www.conf.default /usr/local/php8/etc/php-fpm.d/www.conf
//这里写service文件设置开机自启
[root@node1 php-8.1.11]# vim /usr/lib/systemd/system/php8.service
[Unit]
Description=php
After=network.target
[Service]
Type=forking
ExecStart=/usr/local/php8/sbin/php-fpm
ExecStop=ps -ef |grep php|grep -v grep|awk '{print $2}' |xargs kill -9
ExecReload=/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target
[root@node1 php-8.1.11]# systemctl daemon-reload
[root@node1 php-8.1.11]# systemctl start php-fpm
[root@node1 php-8.1.11]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 0 128 127.0.0.1:9000 0.0.0.0:*
LISTEN 0 128 0.0.0.0:80 0.0.0.0:*
LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
LISTEN 0 70 *:33060 *:*
LISTEN 0 128 *:3306 *:*
LISTEN 0 128 [::]:22 [::]:*
配置nginx
//创建虚拟主机目录并生成php测试页面
[root@node1 ~]# mkdir -p /www/abc
[root@node1 ~]# vim /www/abc/index.php
<?php
phpinfo();
?>
[root@node1 ~]# chown -R nginx.nginx /www/abc/
[root@node1 ~]# vim /usr/local/nginx/conf/nginx.conf
location / {
root /www/abc;
index index.php index.html index.htm;
location ~ \.php$ {
root /www/abc;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /www/abc$fastcgi_script_name;
include fastcgi_params;
[root@node1 ~]# nginx -s stop
[root@node1 ~]# nginx
访问
在node3主机安装httpd，做静态资源
[root@node3 ~]# dnf -y install httpd
[root@node3 ~]# systemctl restart httpd
[root@node3 ~]# systemctl enable httpd
Created symlink /etc/systemd/system/multi-user.target.wants/httpd.service → /usr/lib/systemd/system/httpd.service.
[root@node3 ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
LISTEN 0 128 *:80 *:*
LISTEN 0 128 [::]:22 [::]:*
访问
在node2主机源码安装nginx并配置负载均衡器，进行调度
//创建系统用户nginx
[root@node2 ~]# useradd -r -M -s /sbin/nologin nginx
//安装依赖环境
[root@node2 ~]# dnf -y groups mark install 'Development Tools'
[root@node2 ~]# dnf -y install pcre-devel openssl openssl-devel gd-devel gcc gcc-c++ make vim
//创建日志存放目录
[root@node2 ~]# mkdir -p /var/log/nginx
[root@node2 ~]# chown -R nginx.nginx /var/log/nginx/
[root@node2 ~]# ll -d /var/log/nginx/
drwxr-xr-x. 2 nginx nginx 6 Oct 19 19:18 /var/log/nginx/
//编译安装
[root@node2 ~]# tar xf nginx-1.22.0.tar.gz
[root@node2 ~]# cd nginx-1.22.0
[root@node2 nginx-1.22.0]# ./configure \
> --prefix=/usr/local/nginx \
> --user=nginx \
> --group=nginx \
> --with-debug \
> --with-http_ssl_module \
> --with-http_realip_module \
> --with-http_image_filter_module \
> --with-http_gunzip_module \
> --with-http_gzip_static_module \
> --with-http_stub_status_module \
> --http-log-path=/var/log/nginx/access.log \
> --error-log-path=/var/log/nginx/error.log
[root@node2 nginx-1.22.0]# make && make install
//配置环境变量
[root@node2 ~]# echo 'export PATH=/usr/local/nginx/sbin:$PATH' > /etc/profile.d/nginx.sh
[root@node2 ~]# source /etc/profile.d/nginx.sh
//启动nginx
[root@node2 ~]# nginx
[root@node2 ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 0 128 0.0.0.0:80 0.0.0.0:*
LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
LISTEN 0 128 [::]:22 [::]:*
配置负载均衡
[root@node2 ~]# vim /usr/local/nginx/conf/nginx.conf
upstream webserver {
server 192.168.205.144;
server 192.168.205.150;
}
server {
listen 80;
server_name localhost;
location / {
proxy_pass http://webserver;
}
[root@node2 ~]# nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@node2 ~]# nginx -s reload
[root@node2 ~]# nginx -s stop
[root@node2 ~]# nginx
访问
在nginx主机上配置动静分离
[root@node2 ~]# vim /usr/local/nginx/conf/nginx.conf
upstream webservers1 {
server 192.168.205.144;
}
upstream webservers2 {
server 192.168.205.150;
}
location / {
proxy_pass http://webservers1;
}
location ~ \.php$ {
proxy_pass http://webservers2;
}
[root@node2 ~]# nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@node2 ~]# systemctl restart nginx
静态访问
动态访问
625
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
