<Huawei>
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1
[r1]user-in
[r1]user-interface con
[r1]user-interface console 0
[r1-ui-console0]idle
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit
[r1]inter
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip add
[r1-GigabitEthernet0/0/0]ip address 172.16.96.2 19
[r1-GigabitEthernet0/0/0]
Nov 29 2022 14:49:29-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]quit
[r1]inter
[r1]interface g0/0/1
[r1-GigabitEthernet0/0/1]ip add
[r1-GigabitEthernet0/0/1]ip address 172.16.0.1 19
Nov 29 2022 14:50:40-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r1-GigabitEthernet0/0/1]quit
[r1]interface loop
[r1]interface LoopBack 0
[r1-LoopBack0]ip add
[r1-LoopBack0]ip address 1.1.1.1 32
[r1-LoopBack0]quit
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]net
[r1-ospf-1-area-0.0.0.1]network 172.16.96.2 0.0.0.0
[r1-ospf-1-area-0.0.0.1]network 172.16.96.
Nov 29 2022 15:46:14-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-ospf-1-area-0.0.0.1]network 172.16.96.
Nov 29 2022 15:46:14-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r1-ospf-1-area-0.0.0.1]network 172.16.96.
Nov 29 2022 15:46:14-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neighb
orEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r1-ospf-1-area-0.0.0.1]network 172.16.96.
Nov 29 2022 15:46:14-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange)
[r1-ospf-1-area-0.0.0.1]network 172.16.96.
Nov 29 2022 15:46:14-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng)
[r1-ospf-1-area-0.0.0.1]network 172.16.96.
Nov 29 2022 15:46:14-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ospf-1-area-0.0.0.1]network 172.16.96.0 0.0.127.255
[r1-ospf-1-area-0.0.0.1]netw
[r1-ospf-1-area-0.0.0.1]network 1.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.1]quit
[r1-ospf-1]quit
[r1]inter
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]quit
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]undo network 172.16.96.0 0.0.127.255
[r1-ospf-1-area-0.0.0.1]network 172.16.96.0 0.0.31.255
[r1-ospf-1-area-0.0.0.1]quit
[r1-ospf-1]quit
[r1]interface
Nov 29 2022 16:05:56-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[10]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=6.6.6.6, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r1]interface
Nov 29 2022 16:05:56-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[11]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=6.6.6.6, Neighbo
rAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate r
eason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Paramet
er Mismatch, NeighborChangeTime=2022-11-29 16:05:56-08:00)
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ospf timer hello 5
[r1-GigabitEthernet0/0/0]o
Nov 29 2022 16:06:19-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-GigabitEthernet0/0/0]osp
Nov 29 2022 16:06:22-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r1-GigabitEthernet0/0/0]osp
Nov 29 2022 16:06:22-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r1-GigabitEthernet0/0/0]osp
Nov 29 2022 16:06:22-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r1-GigabitEthernet0/0/0]osp
Nov 29 2022 16:06:22-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-GigabitEthernet0/0/0]ospf timer dead 20
[r1-GigabitEthernet0/0/0]quit
[r1]inter
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ospf dr-priority 2
[r1-GigabitEthernet0/0/0]quit
[r1]display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.1 interface 172.16.96.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 6.6.6.6 Address: 172.16.96.1
State: Full Mode:Nbr is Master Priority: 1
DR: 172.16.96.1 BDR: 172.16.96.2 MTU: 0
Dead timer due in 18 sec
Retrans timer interval: 0
Neighbor is up for 00:08:41
Authentication Sequence: [ 0 ]
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ospf dr-priority 0
Nov 29 2022 16:15:37-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[17]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=6.6.6.6, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r1-GigabitEthernet0/0/0]
[r1-GigabitEthernet0/0/0]
Nov 29 2022 16:15:37-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[18]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=6.6.6.6, Neighbo
rAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate r
eason=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Para
meter Mismatch, NeighborChangeTime=2022-11-29 16:15:37-08:00)
[r1-GigabitEthernet0/0/0]
Nov 29 2022 16:15:40-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-GigabitEthernet0/0/0]
Nov 29 2022 16:15:40-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r1-GigabitEthernet0/0/0]
Nov 29 2022 16:15:40-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r1-GigabitEthernet0/0/0]
Nov 29 2022 16:15:40-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r1-GigabitEthernet0/0/0]
Nov 29 2022 16:15:40-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r1-GigabitEthernet0/0/0]
Nov 29 2022 16:15:40-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-GigabitEthernet0/0/0]quit
[r1]display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.1 interface 172.16.96.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 6.6.6.6 Address: 172.16.96.1
State: Full Mode:Nbr is Master Priority: 1
DR: 172.16.96.1 BDR: None MTU: 0
Dead timer due in 16 sec
Retrans timer interval: 0
Neighbor is up for 00:00:11
Authentication Sequence: [ 0 ]
[r1]
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]user-in
[r2]user-interface con
[r2]user-interface console 0
[r2-ui-console0]idle
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]quit
[r2]inter
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip add
[r2-GigabitEthernet0/0/0]ip address 172.16.64.1 19
[r2-GigabitEthernet0/0/0]
Nov 29 2022 14:51:23-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]quit
[r2]inter
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ip add
[r2-GigabitEthernet0/0/1]ip address 192.168.192.1 19
Nov 29 2022 14:54:13-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]ip add
[r2-GigabitEthernet0/0/1]ip address 172.16.192.1 19
[r2-GigabitEthernet0/0/1]quit
[r2]display ip add
[r2]display ip r
[r2]display ip ro
[r2]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 10 Routes : 10
Destination/Mask Proto Pre Cost Flags NextHop Interface
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.16.64.0/19 Direct 0 0 D 172.16.64.1 GigabitEthernet
0/0/0
172.16.64.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
172.16.95.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
172.16.192.0/19 Direct 0 0 D 172.16.192.1 GigabitEthernet
0/0/1
172.16.192.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
172.16.223.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[r2]int
[r2]interface loop
[r2]interface LoopBack 0
[r2-LoopBack0]ip add
[r2-LoopBack0]ip address 2.2.2.2 32
[r2-LoopBack0]quit
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 2
[r2-ospf-1-area-0.0.0.2]netw
[r2-ospf-1-area-0.0.0.2]network 172.16.192.1 0.0.0
^
Error: Wrong parameter found at '^' position.
[r2-ospf-1-area-0.0.0.2]network 172.16.192.1 0.0.0.0
[r2-ospf-1-area-0.0.0.2]netw
[r2-ospf-1-area-0.0.0.2]network 172.16.192.0 0.0.31.255
[r2-ospf-1-area-0.0.0.2]netw
[r2-ospf-1-area-0.0.0.2]network 2.2.2.2 0.0.0.0
[r2-ospf-1-area-0.0.0.2]
Nov 29 2022 15:59:09-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-1-area-0.0.0.2]
Nov 29 2022 15:59:15-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r2-ospf-1-area-0.0.0.2]
Nov 29 2022 15:59:15-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r2-ospf-1-area-0.0.0.2]
Nov 29 2022 15:59:15-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r2-ospf-1-area-0.0.0.2]
Nov 29 2022 15:59:15-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-ospf-1-area-0.0.0.2]quit
[r2-ospf-1]quit
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ospf timer hello 5
[r2-GigabitEthernet0/0/1]
Nov 29 2022 16:07:37-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[7]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=8.8.8.8, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r2-GigabitEthernet0/0/1]
Nov 29 2022 16:07:37-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=8.8.8.8, Neighbor
AreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate re
ason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Paramete
r Mismatch, NeighborChangeTime=2022-11-29 16:07:37-08:00)
[r2-GigabitEthernet0/0/1]
Nov 29 2022 16:07:58-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/1]
Nov 29 2022 16:07:58-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r2-GigabitEthernet0/0/1]
Nov 29 2022 16:07:58-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r2-GigabitEthernet0/0/1]
Nov 29 2022 16:07:58-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r2-GigabitEthernet0/0/1]
Nov 29 2022 16:07:58-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r3
[r3]user
[r3]user-inter
[r3]user-interface co
[r3]user-interface console 0
[r3-ui-console0]idle
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]quit
[r3]inter
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip add
[r3-GigabitEthernet0/0/0]ip address 172.16.32.1 19
Nov 29 2022 14:59:00-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]quit
[r3]inter
[r3]interface g0/0/1
[r3-GigabitEthernet0/0/1]ip add
[r3-GigabitEthernet0/0/1]ip address 172.16.160.1 19
Nov 29 2022 14:59:31-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]quit
[r3]inter
[r3]interface loop
[r3]interface LoopBack 0
[r3-LoopBack0]ip add
[r3-LoopBack0]ip address 3.3.3.3 32
[r3-LoopBack0]quit
[r3]ospf 1 rou
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 3
[r3-ospf-1-area-0.0.0.3]netw
[r3-ospf-1-area-0.0.0.3]network 172.16.160.1 0.0.0.0
[r3-ospf-1-area-0.0.0.3]network 172.16.160.0 0.0.31.255
[r3-ospf-1-area-0.0.0.3]network 3.3.3.3 0.0.0.0
[r3-ospf-1-area-0.0.0.3]
Nov 29 2022 16:03:02-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-1-area-0.0.0.3]
Nov 29 2022 16:03:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r3-ospf-1-area-0.0.0.3]
Nov 29 2022 16:03:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r3-ospf-1-area-0.0.0.3]
Nov 29 2022 16:03:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r3-ospf-1-area-0.0.0.3]
Nov 29 2022 16:03:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-1-area-0.0.0.3]quit
[r3-ospf-1]quit
[r3]inter
[r3]interface g0/0/1
[r3-GigabitEthernet0/0/1]ospf timer hello 5
[r3-GigabitEthernet0/0/1]
Nov 29 2022 16:08:58-08:00 r3 %%01OSPF/3/NBR_CHG_DOWN(l)[7]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=4.4.4.4, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r3-GigabitEthernet0/0/1]
Nov 29 2022 16:08:58-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=4.4.4.4, Neighbor
AreaId=50331648, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate re
ason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Paramete
r Mismatch, NeighborChangeTime=2022-11-29 16:08:58-08:00)
[r3-GigabitEthernet0/0/1]
Nov 29 2022 16:09:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-GigabitEthernet0/0/1]
Nov 29 2022 16:09:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r3-GigabitEthernet0/0/1]
Nov 29 2022 16:09:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r3-GigabitEthernet0/0/1]
Nov 29 2022 16:09:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r3-GigabitEthernet0/0/1]
Nov 29 2022 16:09:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.160.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]user-in
[r4]user-interface con
[r4]user-interface console 0
[r4-ui-console0]idle
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]quit
[r4]inter
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]ip add
[r4-GigabitEthernet0/0/0]ip address 172.16.160.2 19
[r4-GigabitEthernet0/0/0]
Nov 29 2022 15:00:36-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]quit
[r4]inter
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]ip add
[r4-GigabitEthernet0/0/1]ip address 172.16.128.1 19
Nov 29 2022 15:01:13-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r4-GigabitEthernet0/0/1]quit
[r4]inter
[r4]interface loop
[r4]interface LoopBack 0
[r4-LoopBack0]ip add
[r4-LoopBack0]ip address 4.4.4.4 32
[r4-LoopBack0]quit
[r4]ospf 1 rou
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 3
[r4-ospf-1-area-0.0.0.3]netw
[r4-ospf-1-area-0.0.0.3]network 172.16.160.2 0.0.0.0
[r4-ospf-1-area-0.0.0.3]net
Nov 29 2022 16:03:05-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-ospf-1-area-0.0.0.3]net
Nov 29 2022 16:03:05-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-ospf-1-area-0.0.0.3]net
Nov 29 2022 16:03:05-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-ospf-1-area-0.0.0.3]net
Nov 29 2022 16:03:05-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r4-ospf-1-area-0.0.0.3]net
Nov 29 2022 16:03:05-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r4-ospf-1-area-0.0.0.3]net
Nov 29 2022 16:03:05-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-ospf-1-area-0.0.0.3]net
[r4-ospf-1-area-0.0.0.3]network 172.16.160.0 0.0.31.255
[r4-ospf-1-area-0.0.0.3]net
[r4-ospf-1-area-0.0.0.3]network 4.4.4.4
^
Error:Incomplete command found at '^' position.
[r4-ospf-1-area-0.0.0.3]network 4.4.4.4
^
Error:Incomplete command found at '^' position.
[r4-ospf-1-area-0.0.0.3]network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.3]quit
[r4-ospf-1]quit
[r4]inter
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]ospf timer hello 5
[r4-GigabitEthernet0/0/0]
Nov 29 2022 16:09:22-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=3.3.3.3, Neighbor
AreaId=50331648, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate re
ason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhell
o Received, NeighborChangeTime=2022-11-29 16:09:22-08:00)
[r4-GigabitEthernet0/0/0]
Nov 29 2022 16:09:22-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neigh
borEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Nov 29 2022 16:09:24-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r4-GigabitEthernet0/0/0]
Nov 29 2022 16:09:24-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r4-GigabitEthernet0/0/0]
Nov 29 2022 16:09:24-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r4-GigabitEthernet0/0/0]
Nov 29 2022 16:09:24-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.160.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]quit
[r4]inter
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]undo ip address 172.16.128.1 19
Nov 29 2022 17:00:56-08:00 r4 %%01IFNET/4/LINK_STATE(l)[14]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the DOWN state.
[r4-GigabitEthernet0/0/1]quit
[r4]inter
[r4]interface g0/0/1.1
[r4-GigabitEthernet0/0/1.1]dotlq ter
[r4-GigabitEthernet0/0/1.1]do
[r4-GigabitEthernet0/0/1.1]dot1q te
[r4-GigabitEthernet0/0/1.1]dot1q termination vi
[r4-GigabitEthernet0/0/1.1]dot1q termination vid 20
[r4-GigabitEthernet0/0/1.1]io add
[r4-GigabitEthernet0/0/1.1]ip add
[r4-GigabitEthernet0/0/1.1]ip address 192.168.3.1 24
[r4-GigabitEthernet0/0/1.1]
Nov 29 2022 17:03:36-08:00 r4 %%01IFNET/4/LINK_STATE(l)[15]:The line protocol IP
on the interface GigabitEthernet0/0/1.1 has entered the UP state.
[r4-GigabitEthernet0/0/1.1]quit
[r4]dhcp en
[r4]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r4]ip pool 1
Info: It's successful to create an IP address pool.
[r4-ip-pool-1]netw
[r4-ip-pool-1]network 192.168.3.0 mask 24
[r4-ip-pool-1]ga
[r4-ip-pool-1]gateway-list 192.168.3.1
[r4-ip-pool-1]dns-list 8.8.8.8
[r4-ip-pool-1]quit
[r4]inter
[r4]interface g0/0/1.1
[r4-GigabitEthernet0/0/1.1]dhcp se
[r4-GigabitEthernet0/0/1.1]dhcp select glo
[r4-GigabitEthernet0/0/1.1]dhcp select global
[r4-GigabitEthernet0/0/1.1]quit
[r4]dhcp en
[r4]dhcp enable
[r4]ip pool 2
Info: It's successful to create an IP address pool.
[r4-ip-pool-2]netw
[r4-ip-pool-2]network 192.168.4.0 mask 24
[r4-ip-pool-2]gate
[r4-ip-pool-2]gateway-list 192.168.4.1
[r4-ip-pool-2]dns-list 8.8.8.8
[r4-ip-pool-2]quit
[r4]inter
[r4]interface g0/0/1.2
[r4-GigabitEthernet0/0/1.2]dhcp se
[r4-GigabitEthernet0/0/1.2]dhcp select glo
[r4-GigabitEthernet0/0/1.2]dhcp select global
[r4-GigabitEthernet0/0/1.2]quit
[r4]inter
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]undo ip address 172.16.128.1 19
Error: The specified primary address does not exist.
[r4-GigabitEthernet0/0/1]quit
[r4]interface g0/0/1.2
[r4-GigabitEthernet0/0/1.2]dol
[r4-GigabitEthernet0/0/1.2]do
[r4-GigabitEthernet0/0/1.2]dot1q tr
[r4-GigabitEthernet0/0/1.2]dot1q te
[r4-GigabitEthernet0/0/1.2]dot1q termination vid 30
[r4-GigabitEthernet0/0/1.2]ip add
[r4-GigabitEthernet0/0/1.2]ip address 192.168.4.1 24
Nov 29 2022 17:17:16-08:00 r4 %%01IFNET/4/LINK_STATE(l)[16]:The line protocol IP
on the interface GigabitEthernet0/0/1.2 has entered the UP state.
[r4-GigabitEthernet0/0/1.2]arp br
[r4-GigabitEthernet0/0/1.2]arp broadcast en
[r4-GigabitEthernet0/0/1.2]arp broadcast enable
[r4-GigabitEthernet0/0/1.2]quit
[r4]inter
[r4]interface g0/0/1.1
[r4-GigabitEthernet0/0/1.1]arp broadcast enable
[r4-GigabitEthernet0/0/1.1]user
[r4-GigabitEthernet0/0/1.1]quit
[r4]user-in
[r4]user-interface vty 0 4
[r4-ui-vty0-4]aut
[r4-ui-vty0-4]authentication-mode pass
[r4-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):123
[r4-ui-vty0-4]quit
[r4]aaa
[r4-aaa]local-u
[r4-aaa]local-user xx pr
[r4-aaa]local-user xx privilege lev
[r4-aaa]local-user xx privilege level 15 pass
[r4-aaa]local-user xx privilege level 15 password ci
[r4-aaa]local-user xx privilege level 15 password cipher yy
Info: Add a new user.
[r4-aaa]lo
[r4-aaa]local-user xx pr
[r4-aaa]local-user xx se
[r4-aaa]local-user xx service-type te
[r4-aaa]local-user xx service-type telnet
[r4-aaa]user
[r4-aaa]quit
[r4]user-inter
[r4]user-interface vty 0 4
[r4-ui-vty0-4]au
[r4-ui-vty0-4]authentication-mode aaa
[r4-ui-vty0-4]quit
[r4]quit
<r4>quit
Configuration console exit, please press any key to log on
<r4>
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r6
[r6]user
[r6]user-interface co
[r6]user-interface console 0
[r6-ui-console0]idle
[r6-ui-console0]idle-timeout 0 0
[r6-ui-console0]quit
[r6]inter
[r6]interface g0/0/0
[r6-GigabitEthernet0/0/0]ip add
[r6-GigabitEthernet0/0/0]ip address 10.1.1.2 24
[r6-GigabitEthernet0/0/0]
Nov 29 2022 14:48:10-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r6-GigabitEthernet0/0/0]quit
[r6]inter
[r6]interface g0/0/1
[r6-GigabitEthernet0/0/1]ip add
[r6-GigabitEthernet0/0/1]ip address 172.16.96.1 19
Nov 29 2022 14:48:50-08:00 r6 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r6-GigabitEthernet0/0/1]quit
[r6]inter
[r6]interface loop
[r6]interface LoopBack 0
[r6-LoopBack0]ip add
[r6-LoopBack0]ip address 6.6.6.6 32
[r6-LoopBack0]quit
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]area 1
[r6-ospf-1-area-0.0.0.1]netw
[r6-ospf-1-area-0.0.0.1]network 172.16.96.1 0.0.0.0
[r6-ospf-1-area-0.0.0.1]netw
[r6-ospf-1-area-0.0.0.1]network 172.16.96.0 0.0.127.255
[r6-ospf-1-area-0.0.0.1]6.6.6.6 0.0.0.0
^
Error: Unrecognized command found at '^' position.
[r6-ospf-1-area-0.0.0.1]netw
[r6-ospf-1-area-0.0.0.1]network 6.6.6.6 0.0.0.0
[r6-ospf-1-area-0.0.0.1]
Nov 29 2022 15:46:08-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-ospf-1-area-0.0.0.1]
Nov 29 2022 15:46:15-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r6-ospf-1-area-0.0.0.1]
Nov 29 2022 15:46:15-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange)
[r6-ospf-1-area-0.0.0.1]
Nov 29 2022 15:46:15-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng)
[r6-ospf-1-area-0.0.0.1]
Nov 29 2022 15:46:15-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-ospf-1-area-0.0.0.1]undo area1
^
Error: Unrecognized command found at '^' position.
[r6-ospf-1-area-0.0.0.1]undo network 172.16.96.0 0.0.31.255
Error: The specified network command does not exist.
[r6-ospf-1-area-0.0.0.1]undo network 172.16.96.0 0.0.127.255
[r6-ospf-1-area-0.0.0.1]netw
[r6-ospf-1-area-0.0.0.1]network 172.16.96.0 0.0.31.255
[r6-ospf-1-area-0.0.0.1]quit
[r6-ospf-1]inter
[r6-ospf-1]quit
[r6]inter
[r6]interface g0/0/1
[r6-GigabitEthernet0/0/1]ospf timer hello 5
[r6-GigabitEthernet0/0/1]ospf timer dead 20
[r6-GigabitEthernet0/0/1]
Nov 29 2022 16:05:35-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[7]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=1.1.1.1, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/1]
Nov 29 2022 16:05:35-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate re
ason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Paramete
r Mismatch, NeighborChangeTime=2022-11-29 16:05:35-08:00)
[r6-GigabitEthernet0/0/1]
Nov 29 2022 16:06:23-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/1]
Nov 29 2022 16:06:23-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r6-GigabitEthernet0/0/1]
Nov 29 2022 16:06:23-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r6-GigabitEthernet0/0/1]
Nov 29 2022 16:06:23-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r6-GigabitEthernet0/0/1]
Nov 29 2022 16:06:23-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-GigabitEthernet0/0/1]quit
[r6]display ospf peer
OSPF Process 1 with Router ID 6.6.6.6
Neighbors
Area 0.0.0.1 interface 172.16.96.1(GigabitEthernet0/0/1)'s neighbors
Router ID: 1.1.1.1 Address: 172.16.96.2
State: Full Mode:Nbr is Slave Priority: 1
DR: 172.16.96.1 BDR: 172.16.96.2 MTU: 0
Dead timer due in 18 sec
Retrans timer interval: 5
Neighbor is up for 00:06:10
Authentication Sequence: [ 0 ]
[r6]inter
[r6]
Nov 29 2022 16:15:38-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[14]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbo
rAreaId=16777216, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate r
eason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhel
lo Received, NeighborChangeTime=2022-11-29 16:15:38-08:00)
[r6]
Nov 29 2022 16:15:38-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r6]
Nov 29 2022 16:15:40-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r6]
Nov 29 2022 16:15:40-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r6]
Nov 29 2022 16:15:41-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r6]
Nov 29 2022 16:15:41-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r7
[r7]user-in
[r7]user-interface con
[r7]user-interface console 0
[r7-ui-console0]idle
[r7-ui-console0]idle-timeout 0 0
[r7-ui-console0]quit
[r7]inter
[r7]interface g0/0/0
[r7-GigabitEthernet0/0/0]ip add
[r7-GigabitEthernet0/0/0]ip address 11.1.1.1 24
[r7-GigabitEthernet0/0/0]
Nov 29 2022 14:47:02-08:00 r7 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r7-GigabitEthernet0/0/0]quit
[r7]inter
[r7]interface g0/0/1
[r7-GigabitEthernet0/0/1]ip add
[r7-GigabitEthernet0/0/1]ip address 10.1.1.1 24
[r7-GigabitEthernet0/0/1]
Nov 29 2022 14:47:26-08:00 r7 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r7-GigabitEthernet0/0/1]quit
[r7]user-inter
[r7]user-interface vty 0 4
[r7-ui-vty0-4]auth
[r7-ui-vty0-4]authentication-mode pass
[r7-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):123
[r7-ui-vty0-4]aaa
[r7-aaa]local-user xx privi
[r7-aaa]local-user xx priv
[r7-aaa]local-user xx privilege level 15 password cipher yy
Info: Add a new user.
[r7-aaa]local-user xx service-type telnet
[r7-aaa]user-inter
[r7-aaa]quit
[r7]us
[r7]user-int
[r7]user-interface vty 0 4
[r7-ui-vty0-4]auth
[r7-ui-vty0-4]authentication-mode aaa
[r7-ui-vty0-4]quit
[r7]undo aaa
Warning: This operation may affect online users, are you sure to clear aaa confi
guration ?[Y/N]y
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]vlan 2 3
^
Error:Too many parameters found at '^' position.
[Huawei]vlan batch 2 3
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]in
Nov 29 2022 16:29:55-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 4, th
e change loop count is 0, and the maximum number of records is 4095.ter
^
Error:Incomplete command found at '^' position.
[Huawei]inter
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]port link-type access
[Huawei-Ethernet0/0/2]
Nov 29 2022 16:30:35-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 5, th
e change loop count is 0, and the maximum number of records is 4095.
[Huawei-Ethernet0/0/2]port de
[Huawei-Ethernet0/0/2]port default vl
[Huawei-Ethernet0/0/2]port default vlan 2
[Huawei-Ethernet0/0/2]
Nov 29 2022 16:30:55-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 6, th
e change loop count is 0, and the maximum number of records is 4095.
[Huawei-Ethernet0/0/2]quit
[Huawei]inter
[Huawei]interface e0/0/3
[Huawei-Ethernet0/0/3]port link
^
Error:Ambiguous command found at '^' position.
[Huawei-Ethernet0/0/3]port link
[Huawei-Ethernet0/0/3]port link-ty
[Huawei-Ethernet0/0/3]port link-type acc
[Huawei-Ethernet0/0/3]port link-type access
[Huawei-Ethernet0/0/3]port de
[Huawei-Ethernet0/0/3]port default
Nov 29 2022 16:34:25-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 7, th
e change loop count is 0, and the maximum number of records is 4095.
[Huawei-port-group-default]port default vlan 3
Nov 29 2022 16:34:35-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 8, th
e change loop count is 0, and the maximum number of records is 4095.
[Huawei-port-group-default] User interface con0 is available
Please Press ENTER.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:Eth0/0/1(U) Eth0/0/3(U) Eth0/0/4(D) Eth0/0/5(D)
Eth0/0/6(D) Eth0/0/7(D) Eth0/0/8(D) Eth0/0/9(D)
Eth0/0/10(D) Eth0/0/11(D) Eth0/0/12(D) Eth0/0/13(D)
Eth0/0/14(D) Eth0/0/15(D) Eth0/0/16(D) Eth0/0/17(D)
Eth0/0/18(D) Eth0/0/19(D) Eth0/0/20(D) Eth0/0/21(D)
Eth0/0/22(D) GE0/0/1(D) GE0/0/2(D)
2 common UT:Eth0/0/2(U)
3 common
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
2 enable default enable disable VLAN 0002
3 enable default enable disable VLAN 0003
[Huawei]
[Huawei]inter
[Huawei]interface e0/0/1
[Huawei-Ethernet0/0/1]port link-type trunk
[Huawei-Ethernet0/0/1]port trunk
Nov 29 2022 16:53:56-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 9, th
e change loop count is 0, and the maximum number of records is 4095.
[Huawei-port-group-trunk]port trunk allow-pas
Nov 29 2022 16:54:06-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 10, t
he change loop count is 0, and the maximum number of records is 4095.
^
Error:Incomplete command found at '^' position.
[Huawei-port-group-trunk]port trunk allow-pass vlan all
[Huawei-port-group-trunk]quit
[Huawei]interface e0/0/1
[Huawei-Ethernet0/0/1]port link-type trunk
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan all
[Huawei-Ethernet0/0/1]
Nov 29 2022 16:55:16-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 11, t
he change loop count is 0, and the maximum number of records is 4095. User interface con0 is available
Please Press ENTER.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]interfac
[Huawei]interface g0/0/1.1
^
Error: Wrong parameter found at '^' position.
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]arp br
[Huawei-Ethernet0/0/2]arp bro
[Huawei-Ethernet0/0/2] User interface con0 is available
Please Press ENTER.
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]vlan batch 20 30
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]in
Nov 29 2022 16:57:13-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 4, th
e change loop count is 0, and the maximum number of records is 4095.ter
^
Error:Incomplete command found at '^' position.
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]port link-type access
[Huawei-Ethernet0/0/2]port defau
Nov 29 2022 16:58:13-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 5, th
e change loop count is 0, and the maximum number of recordport link-type access
[Huawei-Ethernet0/0/2]port default vlan 20
[Huawei-Ethernet0/0/2]
Nov 29 2022 16:58:33-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 6, th
e change loop count is 0, and the maximum number of records is 4095.
[Huawei-Ethernet0/0/2]qwuit
^
Error: Unrecognized command found at '^' position.
[Huawei-Ethernet0/0/2]quit
[Huawei]interface e0/0/3
[Huawei-Ethernet0/0/3]port link-typ0e access
^
Error: Unrecognized command found at '^' position.
[Huawei-Ethernet0/0/3]port link-type acc
[Huawei-Ethernet0/0/3]port link-type access
[Huawei-Ethernet0/0/3]port de
[Huawei-Ethernet0/0/3]port default
Nov 29 2022 17:07:33-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 7, th
e change loop count is 0, and the maximum number of records is 4095.vlan 30
[Huawei-Ethernet0/0/3]quit
[Huawei]in
Nov 29 2022 17:07:43-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 8, th
e change loop count is 0, and the maximum number of records is 4095.t
^
Error:Incomplete command found at '^' position.
[Huawei]inter
[Huawei]interface e0/0/1
[Huawei-Ethernet0/0/1]port link-type trunk
[Huawei-Ethernet0/0/1]port trunk a
Nov 29 2022 17:08:23-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 9, th
e change loop count is 0, and the maximum number of records is 4095.ll
^
Error:Incomplete command found at '^' position.
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan all
[Huawei-Ethernet0/0/1]
Nov 29 2022 17:08:43-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 10, t
he change loop count is 0, and the maximum number of records is 4095. User interface con0 is available