【无标题】

最新推荐文章于 2024-05-30 11:47:55 发布
最新推荐文章于 2024-05-30 11:47:55 发布
阅读量168 收藏
点赞数
文章标签： 服务器 网络 运维
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_74812084/article/details/127852318
版权 
[Huawei]sysname r1
[r1]user-interface console 0
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit 
[r1]interface  g0/0/1
[r1-GigabitEthernet0/0/1]ip address 12.1.1.1 24
Nov 14 2022 17:48:04-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r1-GigabitEthernet0/0/1]quit
[r1]uit
    ^
Error: Unrecognized command found at '^' position.
[r1]quit
<r1>ping 12.1.1.2
  PING 12.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 12.1.1.2: bytes=56 Sequence=1 ttl=255 time=40 ms
    Reply from 12.1.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 12.1.1.2: bytes=56 Sequence=3 ttl=255 time=40 ms
    Reply from 12.1.1.2: bytes=56 Sequence=4 ttl=255 time=30 ms
    Reply from 12.1.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 12.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/30/40 ms

<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ip route-static 23.1.1.0 24 12.1.1.2
[r1]int	
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip ad	
[r1-GigabitEthernet0/0/0]ip address 172.16.1.1 24
Nov 14 2022 17:49:54-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]quit
[r1]sysname dhcp
[dhcp]dhcp e	
[dhcp]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[dhcp]ip pool xx
Info: It's successful to create an IP address pool.
[dhcp-ip-pool-xx]netw	
[dhcp-ip-pool-xx]network 172.16.1.0 mask 24
[dhcp-ip-pool-xx]ga	
[dhcp-ip-pool-xx]gateway-list 172.16.1.1
[dhcp-ip-pool-xx]dns	
[dhcp-ip-pool-xx]dns-list 8.8.8.8 114.114.114.114
[dhcp-ip-pool-xx]sta	
[dhcp-ip-pool-xx]static-bind  ip-	
[dhcp-ip-pool-xx]static-bind  ip-address 192.1.1.11 mac	
[dhcp-ip-pool-xx]static-bind  ip-address 192.1.1.11 mac-address 5489-9817-0CD5
Error:The IP address is not in the pool.
[dhcp-ip-pool-xx]static-bind  ip-	
[dhcp-ip-pool-xx]static-bind  ip-address 172.16.1.11 mac-address 5489-9817-0CD5
[dhcp-ip-pool-xx]
[dhcp-ip-pool-xx]static-bind  ip-	
[dhcp-ip-pool-xx]static-bind  ip-address 172.16.1.13 mac	
[dhcp-ip-pool-xx]static-bind  ip-address 172.16.1.13 mac-address 5489-9877-178B
                                                                  ^
Error: Wrong parameter found at '^' position.
[dhcp-ip-pool-xx]static-bind  ip-address 172.16.1.13 mac	
[dhcp-ip-pool-xx]static-bind  ip-address 172.16.1.13 mac-address 5489-9877-17
8B

<Huawei>
Nov 14 2022 16:09:04-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Nov 14 2022 16:09:04-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>
Nov 14 2022 16:09:04-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]us	
[r2]user-i	
[r2]user-interface c	
[r2]user-interface console 0
[r2-ui-console0]id	
[r2-ui-console0]idle-timeout  0 0
[r2-ui-console0]uit
                ^
Error: Unrecognized command found at '^' position.
[r2-ui-console0]quit
[r2]int	
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip ad	
[r2-GigabitEthernet0/0/0]ip address 12.1.1.2 24
Nov 14 2022 16:11:06-08:00 r2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]quit
[r2]int	
[r2]interface  g0/0/2
[r2-GigabitEthernet0/0/2]ip ad	
[r2-GigabitEthernet0/0/2]ip address 23.1.1.1 24
Nov 14 2022 16:11:47-08:00 r2 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r2-GigabitEthernet0/0/2]quit
[r2]int	
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ip ad	
[r2-GigabitEthernet0/0/1]ip address 32.1.1.1 24
[r2-GigabitEthernet0/0/1]
Nov 14 2022 16:12:19-08:00 r2 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]quit
[r2]quit
<r2>ping 23.1.1.2
  PING 23.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 23.1.1.2: bytes=56 Sequence=1 ttl=255 time=50 ms
    Reply from 23.1.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 23.1.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms
    Reply from 23.1.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 23.1.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 23.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/28/50 ms

<r2>ping 32.1.1.2
  PING 32.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 32.1.1.2: bytes=56 Sequence=1 ttl=255 time=40 ms
    Reply from 32.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
    Reply from 32.1.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms
    Reply from 32.1.1.2: bytes=56 Sequence=4 ttl=255 time=10 ms
    Reply from 32.1.1.2: bytes=56 Sequence=5 ttl=255 time=10 ms

  --- 32.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/20/40 ms

<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]ip ro	
[r2]ip route-s	
[r2]ip route-static 34.1.1.0 24 23.1.1.2
[r2]ip ro	
[r2]ip route-	
[r2]ip route-static 34.1.1.0 24 32.1.1.2
[r2]
Nov 14 2022 17:45:40-08:00 r2 %%01IFPDT/4/IF_STATE(l)[6]:Interface GigabitEthern
et0/0/0 has turned into DOWN state.
[r2]
Nov 14 2022 17:45:40-08:00 r2 %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the DOWN state. 
[r2]
Nov 14 2022 17:46:20-08:00 r2 %%01IFPDT/4/IF_STATE(l)[8]:Interface GigabitEthern
et0/0/0 has turned into UP state.
[r2]
Nov 14 2022 17:46:20-08:00 r2 %%01IFNET/4/LINK_STATE(l)[9]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2]
<Huawei>sys 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r3
[r3]us	
[r3]user-i	
[r3]user-interface c	
[r3]user-interface console 0
[r3-ui-console0]id	
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]quit	
[r3-ui-console0]quit 
[r3]int
        ^
Error:Incomplete command found at '^' position.
[r3]int	
[r3]interface  g0/0/0
[r3-GigabitEthernet0/0/0]ip ad	
[r3-GigabitEthernet0/0/0]ip address 32.1.1.2 24
Nov 14 2022 16:13:43-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]quit
[r3]int	
[r3]interface  g0/0/1
[r3-GigabitEthernet0/0/1]ip ad	
[r3-GigabitEthernet0/0/1]ip address 23.1.1.2 24
Nov 14 2022 16:14:18-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]quit
[r3]int
        ^
Error:Incomplete command found at '^' position.
[r3]int	
[r3]interface g0/0/2
[r3-GigabitEthernet0/0/2]ip ad	
[r3-GigabitEthernet0/0/2]ip address 34.1.1.1 24
[r3-GigabitEthernet0/0/2]
Nov 14 2022 16:16:12-08:00 r3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r3-GigabitEthernet0/0/2]quit
[r3]quit
<r3>quit

  Configuration console exit, please press any key to log on

<r3>ping 34.1.1.2
  PING 34.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 34.1.1.2: bytes=56 Sequence=1 ttl=255 time=70 ms
    Reply from 34.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
    Reply from 34.1.1.2: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 34.1.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 34.1.1.2: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 34.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/30/70 ms

<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]ip rou	
[r3]ip route-	
[r3]ip route-static 46.1.1.0 24 34.1.1.2
[r3]ip ro	
[r3]ip route-	
[r3]ip route-static 12.1.1.0 24 23.1.1.1
[r3]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]u	
[r4]us	
[r4]user-i	
[r4]user-interface c	
[r4]user-interface console 0
[r4-ui-console0]id	
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]quit
[r4]int	
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]ip ad	
[r4-GigabitEthernet0/0/0]ip address 34.1.1.2 24
Nov 14 2022 16:16:29-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r4-GigabitEthernet0/0/0]quit
[r4]int	
[r4]interface  g0/0/2
[r4-GigabitEthernet0/0/2]int	
[r4-GigabitEthernet0/0/2]ip ad	
[r4-GigabitEthernet0/0/2]ip address 46.1.1.1 24
[r4-GigabitEthernet0/0/2]
Nov 14 2022 16:17:07-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r4-GigabitEthernet0/0/2]quit
[r4]quit
<r4>ping 46.1.1.2
  PING 46.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 46.1.1.2: bytes=56 Sequence=1 ttl=255 time=60 ms
    Reply from 46.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
    Reply from 46.1.1.2: bytes=56 Sequence=3 ttl=255 time=10 ms
    Reply from 46.1.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 46.1.1.2: bytes=56 Sequence=5 ttl=255 time=10 ms

  --- 46.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/22/60 ms

<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ip	
[r4]ipro	
[r4]ip ro	
[r4]ip route-static 23.1.1.0 24 34.1.1.1
[r4]
Nov 14 2022 17:19:22-08:00 r4 %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEthern
et0/0/2 has turned into DOWN state.
[r4]
Nov 14 2022 17:19:22-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the DOWN state. 
[r4]
Nov 14 2022 17:20:18-08:00 r4 %%01IFPDT/4/IF_STATE(l)[4]:Interface GigabitEthern
et0/0/2 has turned into UP state.
[r4]
Nov 14 2022 17:20:18-08:00 r4 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r4]
[r4]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname
                ^
Error:Incomplete command found at '^' position.
[Huawei]sysname r5
[r5]user	
[r5]user-i	
[r5]user-interface c	
[r5]user-interface console0	
[r5]user-interface console 0
[r5-ui-console0]id	
[r5-ui-console0]idle-timeout 0 0
[r5-ui-console0]quit
[r5]int	
[r5]interface  g0/0/0
[r5-GigabitEthernet0/0/0]ip ad	
[r5-GigabitEthernet0/0/0]ip address 46.1.1.2 24
Nov 14 2022 17:22:54-08:00 r5 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r5-GigabitEthernet0/0/0]quit
[r5]ip ro	
[r5]ip route
[r5]ip route-static34.1.1.0 24 46.1.1.1
       ^
Error: Unrecognized command found at '^' position.
[r5]ip rout	
[r5]ip route
[r5]ip route-static 34.1.1.0 24 46.1.1.1
[r5]int	
[r5]interface  g0/0/1
[r5-GigabitEthernet0/0/1]ip ad	
[r5-GigabitEthernet0/0/1]ip address 192.168.1.1
                                                ^
Error:Incomplete command found at '^' position.
[r5-GigabitEthernet0/0/1]ip address 198.168.1.1 24
Nov 14 2022 17:25:36-08:00 r5 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r5-GigabitEthernet0/0/1]quit
[r5]int	
[r5]interface  g0/0?
  /  /
[r5]interface  g0/0/2
[r5-GigabitEthernet0/0/2]ip ad	
[r5-GigabitEthernet0/0/2]ip address 192.168.2.1 24
[r5-GigabitEthernet0/0/2]
Nov 14 2022 17:26:20-08:00 r5 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r5-GigabitEthernet0/0/2]quit
[r5]sysname
            ^
Error:Incomplete command found at '^' position.
[r5]sysn	
[r5]sysname dhcp
[dhcp]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[dhcp]ip pool jinching
Info: It's successful to create an IP address pool.
[dhcp-ip-pool-jinching]netw	
[dhcp-ip-pool-jinching]network 192.168.1.0 mask 24
[dhcp-ip-pool-jinching]gate	
[dhcp-ip-pool-jinching]gateway-list 192.168.1.1
[dhcp-ip-pool-jinching]dns	
[dhcp-ip-pool-jinching]dns-list 8.8.8.8 114.114.114.114.114
                                        ^
Error: Wrong parameter found at '^' position.
[dhcp-ip-pool-jinching]dns	
[dhcp-ip-pool-jinching]dns-list 8.8.8.8 114.114.114.114
[dhcp-ip-pool-jinching]exc	
[dhcp-ip-pool-jinching]excluded-ip-address 192.168.1.250-254
                                           ^
Error: Wrong parameter found at '^' position.
[dhcp-ip-pool-jinching]ex	
[dhcp-ip-pool-jinching]excluded-ip-address 192.168.1.250-192.168.1.254
                                           ^
Error: Wrong parameter found at '^' position.
[dhcp-ip-pool-jinching]exc	
[dhcp-ip-pool-jinching]excluded-ip-address 250-254
                                           ^
Error: Wrong parameter found at '^' position.
[dhcp-ip-pool-jinching]exc	
[dhcp-ip-pool-jinching]excluded-ip-address 192.168.1.250 192.168.1.254
[dhcp-ip-pool-jinching]quit
[dhcp]int	
[dhcp]interface  g0/0/2
[dhcp-GigabitEthernet0/0/2]ip ad	
[dhcp-GigabitEthernet0/0/2]ip address 192.168.2.1 24
Error: The address already exists.
[dhcp-GigabitEthernet0/0/2]ip ad	
[dhcp-GigabitEthernet0/0/2]ip address 192.168.2.2 24
[dhcp-GigabitEthernet0/0/2]

m0_74812084
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
无标题
02-12
无标题
VC去掉'无标题'字样的方法.zip
11-21
Visual c++去掉'无标题'字样的方法.zip
Qt无标题窗口
05-21
一个比较简单的Qt无标题窗口，基本实现了现在默认窗口自带的功能，可以用于界面美化自绘标题栏。
visual c++取掉对话框窗口的 -无标题 字样的方法
08-04
vc++取掉窗口的 -无标题 字样
华为设备 命令行的错误提示
weixin_48776593的博客
01-30 1753
(error:误差,)（found:找到,）（position:定位,（command:控制,）（wrong:不合适,（parameter:范围,
Qt-无标题窗口
学而思
05-21 7230
        今天学习了下无标题窗口，于是来记录下我的学习过程首先建立一个Qt Widgets Application继承QWidget类创建完后直接运行就得到了如下效果那么，既然是无标题窗口就要去掉窗口栏啊，于是加上setWindowFlags(Qt::FramelessWindowHint | Qt::WindowMinimizeButtonHint);去掉标题栏，但是这样整个窗口就不能移动...
C# 移动无标题栏无边框窗体的3种方法
SabreWulf
03-13 2222
目录 第一种：手工移动 第二种：调用系统API 1.引入下面代码 前提需要引入命名空间using System.Runtime.InteropServices 2.增加鼠标按下事件发送消息，让系统误以为按下是标题栏 第三种，重写 WndProc 第一种：手工移动 直接通过修改窗体位置从而达到移动窗体的效果 //定义一个位置信息Point用于存储鼠标位置 private Point mPoint; /// <summary>
Qt实现改变无标题栏窗体大小及移动窗体
danshiming的博客
11-10 2915
Qt实现鼠标左键拖动无标题栏窗体右下角改变窗体大小及移动窗体
2021-06-09
m0_56229717的博客
06-09 454
R1 The device is running! <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname r1 [r1]interf [r1]interface g [r1]interface GigabitEthernet 0/0/0 [r1-GigabitEthernet0/0/0]ip add 12.1.1.1 24 Jun 9 2021 18:1...
IP地址的配置与运用，全网通
weixin_74812127的博客
11-13 1099
学习hcia'的第三天
ENSP软件在命令行输入命令一直报错
热门推荐
qq_45322943的博客
03-09 1万+
The device is running! inter ^ Error: Unrecognized command found at ‘^’ position. sys Enter system view, return user view with Ctrl+Z. [Huawei]inter ^ Error:Incomplete command found at ‘^’ position. [...
webserver服务器从零搭建到上线（八）｜EpollPoller事件分发器类
糖炒栗子
05-28 875
EPollPoller 类实现了基于 epoll 的 I/O 多路复用，通过监控多个文件描述符上的事件，并在事件发生时通知相应的 Channel 对象来处理事件。通过实现这些函数，EPollPoller 能够高效地管理和分发事件。下一节，我们将讲解EventLoop类的具体实现！
华纳云：在一个服务器上如何设置多个IP地址?
YOKEhn的博客
05-27 358
在Windows上，可以通过网络连接的高级TCP/IP设置或使用netsh命令添加多个IP地址。在一个服务器上设置多个IP地址的具体步骤取决于所使用的操作系统(例如Linux或Windows)。你也可以使用ip命令临时配置多个IP地址，这在需要立即生效但不重启网络服务的情况下非常有用。在“IP 设置”标签下，点击“添加”按钮，输入新的IP地址和子网掩码，然后点击“添加”。选择“Internet 协议版本 4 (TCP/IPv4)”，然后点击“属性”。右键点击要配置的网络适配器，选择“属性”。
TPM之VMK密封
柳似烟的专栏
05-27 402
同样的，具备TPM芯片的电脑，在系统中存在一个\Device\TPM的设备以及对应的TPM驱动程序，所以，当对系统进行基于TPM芯片的Bitlocker加密时，存在DeviceIOControl的交互，下面通过抓包来窥探这一过程。同样，基于TPM的安全启动链也不做过多解释，简单说就是当电脑通过TPM进行全盘加密后，后期对电脑的改动影响系统启动，PCR校验不通过时，触发输入恢复密钥的“蓝屏”。通过分析保存的json格式的文件，追踪文件句柄，得到TPM加密时的所有与驱动层的交互数据。PCR校验位图解释如下。
sh发送邮件如何通过配置SMTP服务器来实现？
最新发布
qianke369的博客
05-30 511
通过配置SMTP服务器，可以实现在Shell脚本中发送邮件的功能。AokSend，API/SMTP接口秒发邮件，sh脚本一键操作，轻松实现高效营销，让您的业务更上层楼！
Linux chmod 命令
2301_78660211的博客
05-29 675
chmod命令是 Linux 系统中非常重要的命令，它可以用于修改文件和目录的访问权限，以及控制用户对系统资源的访问。在这篇博客中，我们深入探讨了chmod命令的使用方法，以及如何使用它来管理文件和目录的访问权限。希望这篇博客能够帮助读者更好地理解和使用 Linux 系统。
Linux系统下安装配置nginx,本地访问服务器nginx
y662225dd的博客
05-29 436
3.本地测试服务器上的nginx，出现以下画面即可表示安装nginx成功了，本地连接也没问题。5.安装成功后，nginx会默认安装在/usr/local/nginx目录下。4.编译安装Nginx。1.进入到nginx目录下的sbin。http://服务器ip:8080。
【技术实操】银河高级服务器操作系统实例分享，达梦数据库服务器 oom 问题分析
银河麒麟操作系统的博客
05-28 609
【技术实操】银河高级服务器操作系统实例分享，达梦数据库服务器 oom 问题分析。
设置无标题 android
05-02
在Android应用中，设置无标题是一种简洁和美观的设计方式，可以为用户提供更流畅的使用体验。以下是一些实现设置无标题的方法： 1. 在Android的Manifest文件中，找到对应Activity的标签，并添加”android:theme="@android:style/Theme.NoTitleBar"“属性。这样可以通过Android自带的主题去掉标题栏。 2. 使用自定义的主题，可以在样式表中添加以下代码： <style name="AppTheme" parent="Theme.AppCompat.NoActionBar"> <!-- ...其他样式... --> </style> 这种方式可以通过设置主题去除ActionBar和标题栏，同时保留其他布局元素。 3. 去掉代码中的setTitle()方法，这是一种最简单的方法，通过不设置Activity的标题来实现无标题。 以上就是三种常见的实现Android无标题的方式，开发者可以根据实际需求进行选择。值得注意的是，去除标题栏可能会影响用户的导航体验，因此在设计上需要考虑周全。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值