STM32 Arduino开发环境配置

添加板包

选择文件->首选项，在附加开发板管理器中填入以下网址：

http://mcu.lvjianze.cn/study/stm32/package_stmicroelectronics_index.json

配置完可能需要重启

连接开发板

选择板子和端口

也可以在Tools菜单栏中选择

对于STM32可能还需要选择以下参数

案例

新建一个项目，点击上传

点击如果打印以下信息说明安装成功

ketch uses 11960 bytes (2%) of program storage space. Maximum is 524288 bytes.
Global variables use 836 bytes (0%) of dynamic memory, leaving 195772 bytes for local variables. Maximum is 196608 bytes.

--------------------------
Compilation complete.
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.9.0                  
      -------------------------------------------------------------------

ST-LINK SN  : 066BFF393738425043083432
ST-LINK FW  : V2J33M25
Board       : P-NUCLEO-WB55
Voltage     : 3.25V
SWD freq    : 4000 KHz
Connect mode: Under Reset
Reset mode  : Hardware reset
Device ID   : 0x495
Revision ID : Rev Y
Device name : STM32WB5x
Flash size  : 1 MBytes
Device type : MCU
Device CPU  : Cortex-M4
BL Version  : 0xd5
Debug in Low Power mode enabled



Memory Programming ...
Opening and parsing file: sketch_feb22a.ino.bin
  File          : sketch_feb22a.ino.bin
  Size          : 12300 Bytes
  Address       : 0x08000000 


Erasing memory corresponding to segment 0:
Erasing internal memory sectors [0 3]
Download in Progress:


File download complete
Time elapsed during download operation: 00:00:01.015

RUNNING Program ... 
  Address:      : 0x8000000
Application is running, Please Hold on...
Start operation achieved successfully

--------------------------
upload complete.

问题

stm32: Error during Upload: Property 'upload.tool.serial' is undefined

解决

stm32: Error during Upload: Property ‘upload.tool.serial’ is undefined · Issue #1444 · arduino/arduino-cli (github.com)

fix: arduino-cli upload failed (version started from 0.19.0 to 0.21.0)，arduino-cli 0.19.0-0.21.0版本会出现以上问题，需要更新arduino-cli版本

arduino-cli.exe 位置 --Arduino安装目录–\resources\app\node_modules\arduino-ide-extension\build

Installation - Arduino CLI

将下载的arduino-cli 替换掉之前的 arduino-cli即可

Sketch uses 11960 bytes (2%) of program storage space. Maximum is 524288 bytes.
Global variables use 836 bytes (0%) of dynamic memory, leaving 195772 bytes for local variables. Maximum is 196608 bytes.

--------------------------
Compilation complete.
STM32CubeProgrammer not found (STM32_Programmer_CLI.exe).
Please install it or add '<STM32CubeProgrammer path>\bin' to your PATH environment:
https://www.st.com/en/development-tools/stm32cubeprog.html
Aborting!
C:/Users/eG/AppData/Local/Arduino15/packages/STMicroelectronics/tools/STM32Tools/2.1.1/stm32CubeProg.sh: line 141: STM32_Programmer_CLI.exe: not found
Upload error: Failed uploading: uploading error: exit status 127

解决

下载STM32CubeProgrammer

安装后将bin配置成到环境变量中