基础算法——dijikstra

最新推荐文章于 2025-05-10 20:11:15 发布

memoryjdch

最新推荐文章于 2025-05-10 20:11:15 发布

阅读量767

点赞数 1

分类专栏：基础算法文章标签： dijikstra

本文链接：https://blog.csdn.net/memoryjdch/article/details/81104689

版权

基础算法专栏收录该内容

15 篇文章

订阅专栏

字典表示

# Dijkstra算法——通过边实现松弛
# 指定一个点到其他各顶点的路径——单源最短路径

# 初始化图参数
G = {1: {1: 0, 2: 1, 3: 12},
     2: {2: 0, 3: 9, 4: 3},
     3: {3: 0, 5: 5},
     4: {3: 4, 4: 0, 5: 13, 6: 15},
     5: {5: 0, 6: 4},
     6: {6: 0}}


# 每次找到离源点最近的一个顶点，然后以该顶点为重心进行扩展
# 最终的到源点到其余所有点的最短路径
# 一种贪婪算法

def Dijkstra(G, v0, INF=999):
    """ 使用 Dijkstra 算法计算指定点 v0 到图 G 中任意点的最短路径的距离
        INF 为设定的无限远距离值
        此方法不能解决负权值边的图
    """
    book = set()  # 存储当前的顶点集合
    minv = v0

    # 源顶点到其余各顶点的初始路程
    dis = dict((k, INF) for k in G.keys())
    dis[v0] = 0  # 此时dis为 {1: 0, 2: 999, 3: 999, 4: 999, 5: 999, 6: 999}

    while len(book) < len(G):  # 还没有遍历完所有顶点的时候
        book.add(minv)  # 把当前的顶点加入到book中
        for w in G[minv]:  # 以当前点的中心向外扩散,G[v0] : {1: 0, 2: 1, 3: 12}, w : 1,2,3
            if dis[minv] + G[minv][w] < dis[w]:  # 如果从当前点扩展到某一点的距离小与已知最短距离
                dis[w] = dis[minv] + G[minv][w]  # 对已知距离进行更新

        new = INF  # 从剩下的未确定点中选择最小距离点作为新的扩散点
        # 不能直接取min是因为要记录最短的距离所对应的节点v
        for v in dis.keys():
            if v in book: continue
            if dis[v] < new:
                new = dis[v]
                minv = v
    return dis


dis = Dijkstra(G, v0=1)
print(dis.values())

邻接矩阵表示

from collections import defaultdict
from heapq import *


def dijkstra_raw(edges, from_node, to_node):
    g = defaultdict(list)
    for l, r, c in edges:
        g[l].append((c, r))
    q, seen = [(0, from_node, ())], set()
    while q:
        (cost, v1, path) = heappop(q)
        if v1 not in seen:
            seen.add(v1)
            path = (v1, path)
            if v1 == to_node:
                return cost, path
            for c, v2 in g.get(v1, ()):
                if v2 not in seen:
                    heappush(q, (cost + c, v2, path))
    return float("inf"), []


def dijkstra(edges, from_node, to_node):
    len_shortest_path = -1
    ret_path = []
    length, path_queue = dijkstra_raw(edges, from_node, to_node)
    if len(path_queue) > 0:
        len_shortest_path = length  # 1. Get the length firstly;
        # 2. Decompose the path_queue, to get the passing nodes in the shortest path.
        left = path_queue[0]
        ret_path.append(left)  # 2.1 Record the destination node firstly;
        right = path_queue[1]
        while len(right) > 0:
            left = right[0]
            ret_path.append(left)  # 2.2 Record other nodes, till the source-node.
            right = right[1]
        ret_path.reverse()  # 3. Reverse the list finally, to make it be normal sequence.
    return len_shortest_path, ret_path


# ==================== Given a list of nodes in the topology shown in Fig. 1.
list_nodes_id = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20];
# ==================== Given constants matrix of topology.
M = 99999  # This represents a large distance. It means that there is no link.
# M_topo is the 2-dimensional adjacent matrix used to represent a topology.
M_topo = [
    [M, 1, 1, M, 1, M, 1, 1, 1, M, M, M, M, M, M, M, M, M, M, M, M],
    [1, M, 1, M, M, 1, M, M, M, M, M, M, M, M, M, M, M, M, M, M, M],
    [1, 1, M, 1, M, M, M, M, M, M, M, M, M, M, M, M, M, M, M, M, M],
    [M, M, 1, M, 1, M, M, M, M, M, M, M, M, M, M, M, M, M, M, M, M],
    [1, M, M, 1, M, M, M, M, M, 1, 1, 1, M, M, M, M, M, M, M, M, M],
    [M, 1, M, M, M, M, 1, M, M, M, M, M, M, M, M, M, M, M, M, M, M],
    [1, M, M, M, M, 1, M, 1, M, M, M, M, M, M, M, M, M, M, M, M, M],
    [1, M, M, M, M, M, 1, M, 1, M, M, M, M, M, M, M, M, M, M, M, M],
    [1, M, M, M, M, M, M, 1, M, 1, M, M, 1, M, M, M, M, M, M, M, M],
    [M, M, M, M, 1, M, M, M, 1, M, M, 1, M, M, M, M, M, M, M, M, M],
    [M, M, M, M, 1, M, M, M, M, M, M, 1, M, 1, M, M, M, M, M, M, M],
    [M, M, M, M, 1, M, M, M, M, 1, 1, M, M, 1, 1, M, M, M, M, M, M],
    [M, M, M, M, M, M, M, M, 1, M, M, M, M, M, 1, M, M, M, M, M, M],
    [M, M, M, M, M, M, M, M, M, M, 1, 1, M, M, 1, M, M, 1, 1, M, M],
    [M, M, M, M, M, M, M, M, M, M, M, 1, 1, 1, M, 1, 1, M, M, M, M],
    [M, M, M, M, M, M, M, M, M, M, M, M, M, M, 1, M, 1, M, 1, 1, M],
    [M, M, M, M, M, M, M, M, M, M, M, M, M, M, 1, 1, M, M, M, M, 1],
    [M, M, M, M, M, M, M, M, M, M, M, M, M, 1, M, M, M, M, 1, M, M],
    [M, M, M, M, M, M, M, M, M, M, M, M, M, 1, M, 1, M, 1, M, 1, M],
    [M, M, M, M, M, M, M, M, M, M, M, M, M, M, M, 1, M, M, 1, M, 1],
    [M, M, M, M, M, M, M, M, M, M, M, M, M, M, M, M, 1, M, M, 1, M]
]

# --- Read the topology, and generate all edges in the given topology.
edges = []
for i in range(len(M_topo)):
    for j in range(len(M_topo[0])):
        if i != j and M_topo[i][j] != M:
            edges.append((i, j, M_topo[i][j]))  # (i,j) is a link; M_topo[i][j] here is 1, the length of link (i,j).

print("=== Dijkstra ===")
print("Let's find the shortest-path from 0 to 13:")
length, Shortest_path = dijkstra(edges, 0, 13)
print('length = ', length)
print('The shortest path is ', Shortest_path)