CTS测试之USB端口配置

Check device vendor id and product id:

$ lsusb 
Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 078: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader Bus 002 Device 003: ID 8087:07dc Intel Corp. Bus 002 Device 002: ID 5986:0652 Acer, Inc Bus 002 Device 081: ID 22b8:2e81 Motorola PCS Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Now create a udev rule:

$ sudo vi /etc/udev/rules.d/51-android.rules
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", ATTR{idProduct}=="2e81", MODE="0666", GROUP="plugdev"

Now the device is good to be detected once udev rule is reloaded. So, let's do it:

$ sudo udevadm control --reload-rules

After this, again check if your device is detected by adb:

$ adb devices List of devices attached
ZF6222Q9D9  device