http://blog.chinaunix.net/xmlrpc.php?r=blog/article&uid=28765492&id=3793532
一、网上常用方法
1、当Socket.Conneted == false时,调用如下函数进行判断点击(此处)折叠或打开
- ///
- /// 当socket.connected为false时,进一步确定下当前连接状态
- ///
- ///
- private bool IsSocketConnected()
- {
- #region remarks
- /********************************************************************************************
- * 当Socket.Conneted为false时, 如果您需要确定连接的当前状态,请进行非阻塞、零字节的 Send 调用。
- * 如果该调用成功返回或引发 WAEWOULDBLOCK 错误代码 (10035),则该套接字仍然处于连接状态;
- * 否则,该套接字不再处于连接状态。
- * Depending on http://msdn.microsoft.com/zh-cn/library/system.net.sockets.socket.connected.aspx?cs-save-lang=1&cs-lang=csharp#code-snippet-2
- ********************************************************************************************/
- #endregion
-
- #region 过程
- // This is how you can determine whether a socket is still connected.
- bool connectState = true;
- bool blockingState = socket.Blocking;
- try
- {
- byte[] tmp = new byte[1];
-
- socket.Blocking = false;
- socket.Send(tmp, 0, 0);
- //Console.WriteLine("Connected!");
- connectState = true; //若Send错误会跳去执行catch体,而不会执行其try体里其之后的代码
- }
- catch (SocketException e)
- {
- // 10035 == WSAEWOULDBLOCK
- if (e.NativeErrorCode.Equals(10035))
- {
- //Console.WriteLine("Still Connected, but the Send would block");
- connectState = true;
- }
-
- else
- {
- //Console.WriteLine("Disconnected: error code {0}!", e.NativeErrorCode);
- connectState = false;
- }
- }
- finally
- {
- socket.Blocking = blockingState;
- }
-
- //Console.WriteLine("Connected: {0}", client.Connected);
- return connectState;
- #endregion
- }
点击(此处)折叠或打开
- ///
- /// 另一种判断connected的方法,但未检测对端网线断开或ungraceful的情况
- ///
- ///
- ///
- static bool IsSocketConnected(Socket s)
- {
- #region remarks
- /* As zendar wrote, it is nice to use the Socket.Poll and Socket.Available, but you need to take into conside ration
- * that the socket might not have been initialized in the first place.
- * This is the last (I believe) piece of information and it is supplied by the Socket.Connected property.
- * The revised version of the method would looks something like this:
- * from:http://stackoverflow.com/questions/2661764/how-to-check-if-a-socket-is-connected-disconnected-in-c */
- #endregion
-
- #region 过程
-
- return !((s.Poll(1000, SelectMode.SelectRead) && (s.Available == 0)) || !s.Connected);
-
- /* The long, but simpler-to-understand version:
-
- bool part1 = s.Poll(1000, SelectMode.SelectRead);
- bool part2 = (s.Available == 0);
- if ((part1 && part2 ) || !s.Connected)
- return false;
- else
- return true;
-
- */
- #endregion
- }
--2--此两种方法适用于对端正常关闭socket下的本地socket状态检测,在非正常关闭如断电、拔网线的情况下不起作用
因为Socket.Conneted存在bug,详见 .Net Bugs
二、支持物理断线重连功能的类
利用BeginReceive + KeepAlive实现物理断线重连,初步测验了一下,正常。(部分代码参考 帖子#26 及 blog在C#中利用keep-alive处理socket网络异常断开 )
Keep-Alive机制的介绍请看 TCP Keepalive HOWTO
以此备忘,同时希望能帮助到有需要的同学。
点击(此处)折叠或打开
- using System;
- using System.Collections.Generic;
- using System.Linq;
- using System.Text;
- using System.Net.Sockets;
- using System.Net;
- using System.Threading;
-
- namespace MySocket
- {
- public class Socket_wrapper
- {
- //委托
- private delegate void delSocketDataArrival(byte[] data);
- static delSocketDataArrival socketDataArrival = socketDataArrivalHandler;
-
- private delegate void delSocketDisconnected();
- static delSocketDisconnected socketDisconnected = socketDisconnectedHandler;
-
- public static Socket theSocket = null;
- private static string remoteHost = "192.168.1.71";
- private static int remotePort = 6666;
-
- private static String SockErrorStr = null;
- private static ManualResetEvent TimeoutObject = new ManualResetEvent(false);
- private static Boolean IsconnectSuccess = false; //异步连接情况,由异步连接回调函数置位
- private static object lockObj_IsConnectSuccess = new object();
-
- ///
- /// 构造函数
- ///
- ///
- ///
- public Socket_wrapper(string strIp, int iPort)
- {
- remoteHost = strIp;
- remotePort = iPort;
- }
-
- ///
- /// 设置心跳
- ///
- private static void SetXinTiao()
- {
- //byte[] inValue = new byte[] { 1, 0, 0, 0, 0x20, 0x4e, 0, 0, 0xd0, 0x07, 0, 0 };// 首次探测时间20 秒, 间隔侦测时间2 秒
- byte[] inValue = new byte[] { 1, 0, 0, 0, 0x88, 0x13, 0, 0, 0xd0, 0x07, 0, 0 };// 首次探测时间5 秒, 间隔侦测时间2 秒
- theSocket.IOControl(IOControlCode.KeepAliveValues, inValue, null);
- }
-
- ///
- /// 创建套接字+异步连接函数
- ///
- ///
- private static bool socket_create_connect()
- {
- IPAddress ipAddress = IPAddress.Parse(remoteHost);
- IPEndPoint remoteEP = new IPEndPoint(ipAddress, remotePort);
- theSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
- theSocket.SendTimeout = 1000;
-
- SetXinTiao();//设置心跳参数
-
- #region 异步连接代码
-
- TimeoutObject.Reset(); //复位timeout事件
- try
- {
- theSocket.BeginConnect(remoteEP, connectedCallback, theSocket);
- }
- catch (Exception err)
- {
- SockErrorStr = err.ToString();
- return false;
- }
- if (TimeoutObject.WaitOne(10000, false))//直到timeout,或者TimeoutObject.set()
- {
- if (IsconnectSuccess)
- {
- return true;
- }
- else
- {
- return false;
- }
- }
- else
- {
- SockErrorStr = "Time Out";
- return false;
- }
- #endregion
- }
-
- ///
- /// 同步receive函数
- ///
- ///
- ///
- public string socket_receive(byte[] readBuffer)
- {
- try
- {
- if (theSocket == null)
- {
- socket_create_connect();
- }
- else if (!theSocket.Connected)
- {
- if (!IsSocketConnected())
- Reconnect();
- }
-
- int bytesRec = theSocket.Receive(readBuffer);
-
- if (bytesRec == 0)
- {
- //warning 0 bytes received
- }
- return Encoding.ASCII.GetString(readBuffer, 0, bytesRec);
- }
- catch (SocketException se)
- {
- //print se.ErrorCode
- throw;
- }
- }
-
- ///
- /// 同步send函数
- ///
- ///
- ///
- public bool socket_send(string sendMessage)
- {
- if (checkSocketState())
- {
- return SendData(sendMessage);
- }
- return false;
- }
-
- ///
- /// 断线重连函数
- ///
- ///
- private static bool Reconnect()
- {
- //关闭socket
- theSocket.Shutdown(SocketShutdown.Both);
-
- theSocket.Disconnect(true);
- IsconnectSuccess = false;
-
- theSocket.Close();
-
- //创建socket
- return socket_create_connect();
- }
-
- ///
- /// 当socket.connected为false时,进一步确定下当前连接状态
- ///
- ///
- private bool IsSocketConnected()
- {
- #region remarks
- /********************************************************************************************
- * 当Socket.Conneted为false时, 如果您需要确定连接的当前状态,请进行非阻塞、零字节的 Send 调用。
- * 如果该调用成功返回或引发 WAEWOULDBLOCK 错误代码 (10035),则该套接字仍然处于连接状态;
- * 否则,该套接字不再处于连接状态。
- * Depending on http://msdn.microsoft.com/zh-cn/library/system.net.sockets.socket.connected.aspx?cs-save-lang=1&cs-lang=csharp#code-snippet-2
- ********************************************************************************************/
- #endregion
-
- #region 过程
- // This is how you can determine whether a socket is still connected.
- bool connectState = true;
- bool blockingState = theSocket.Blocking;
- try
- {
- byte[] tmp = new byte[1];
-
- theSocket.Blocking = false;
- theSocket.Send(tmp, 0, 0);
- //Console.WriteLine("Connected!");
- connectState = true; //若Send错误会跳去执行catch体,而不会执行其try体里其之后的代码
- }
- catch (SocketException e)
- {
- // 10035 == WSAEWOULDBLOCK
- if (e.NativeErrorCode.Equals(10035))
- {
- //Console.WriteLine("Still Connected, but the Send would block");
- connectState = true;
- }
-
- else
- {
- //Console.WriteLine("Disconnected: error code {0}!", e.NativeErrorCode);
- connectState = false;
- }
- }
- finally
- {
- theSocket.Blocking = blockingState;
- }
-
- //Console.WriteLine("Connected: {0}", client.Connected);
- return connectState;
- #endregion
- }
-
- ///
- /// 另一种判断connected的方法,但未检测对端网线断开或ungraceful的情况
- ///
- ///
- ///
- public static bool IsSocketConnected(Socket s)
- {
- #region remarks
- /* As zendar wrote, it is nice to use the Socket.Poll and Socket.Available, but you need to take into consideration
- * that the socket might not have been initialized in the first place.
- * This is the last (I believe) piece of information and it is supplied by the Socket.Connected property.
- * The revised version of the method would looks something like this:
- * from:http://stackoverflow.com/questions/2661764/how-to-check-if-a-socket-is-connected-disconnected-in-c */
- #endregion
-
- #region 过程
-
- if (s == null)
- return false;
- return !((s.Poll(1000, SelectMode.SelectRead) && (s.Available == 0)) || !s.Connected);
-
- /* The long, but simpler-to-understand version:
-
- bool part1 = s.Poll(1000, SelectMode.SelectRead);
- bool part2 = (s.Available == 0);
- if ((part1 && part2 ) || !s.Connected)
- return false;
- else
- return true;
-
- */
- #endregion
- }
-
- ///
- /// 异步连接回调函数
- ///
- ///
- static void connectedCallback(IAsyncResult iar)
- {
- #region <remarks>
- /// 1、置位IsconnectSuccess
- #endregion </remarks>
-
- lock (lockObj_IsConnectSuccess)
- {
- Socket client = (Socket)iar.AsyncState;
- try
- {
- client.EndConnect(iar);
- IsconnectSuccess = true;
- StartKeepAlive(); //开始KeppAlive检测
- }
- catch (Exception e)
- {
- //Console.WriteLine(e.ToString());
- SockErrorStr = e.ToString();
- IsconnectSuccess = false;
- }
- finally
- {
- TimeoutObject.Set();
- }
- }
- }
-
- ///
- /// 开始KeepAlive检测函数
- ///
- private static void StartKeepAlive()
- {
- theSocket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(OnReceiveCallback), theSocket);
- }
-
- ///
- /// BeginReceive回调函数
- ///
- static byte[] buffer = new byte[1024];
- private static void OnReceiveCallback(IAsyncResult ar)
- {
- try
- {
- Socket peerSock = (Socket)ar.AsyncState;
- int BytesRead = peerSock.EndReceive(ar);
- if (BytesRead > 0)
- {
- byte[] tmp = new byte[BytesRead];
- Array.ConstrainedCopy(buffer, 0, tmp, 0, BytesRead);
- if (socketDataArrival != null)
- {
- socketDataArrival(tmp);
- }
- }
- else//对端gracefully关闭一个连接
- {
- if (theSocket.Connected)//上次socket的状态
- {
- if (socketDisconnected != null)
- {
- //1-重连
- socketDisconnected();
- //2-退出,不再执行BeginReceive
- return;
- }
- }
- }
- //此处buffer似乎要清空--待实现 zq
- theSocket.BeginReceive(buffer, 0, buffer.Length, SocketFlags.None, new AsyncCallback(OnReceiveCallback), theSocket);
- }
- catch (Exception ex)
- {
- if (socketDisconnected != null)
- {
- socketDisconnected(); //Keepalive检测网线断开引发的异常在这里捕获
- return;
- }
- }
- }
-
- ///
- /// 异步收到消息处理器
- ///
- ///
- private static void socketDataArrivalHandler(byte[] data)
- {
- }
-
- ///
- /// socket由于连接中断(软/硬中断)的后续工作处理器
- ///
- private static void socketDisconnectedHandler()
- {
- Reconnect();
- }
-
- ///
- /// 检测socket的状态
- ///
- ///
- public static bool checkSocketState()
- {
- try
- {
- if (theSocket == null)
- {
- return socket_create_connect();
- }
- else if (IsconnectSuccess)
- {
- return true;
- }
- else//已创建套接字,但未connected
- {
- #region 异步连接代码
-
- TimeoutObject.Reset(); //复位timeout事件
- try
- {
- IPAddress ipAddress = IPAddress.Parse(remoteHost);
- IPEndPoint remoteEP = new IPEndPoint(ipAddress, remotePort);
- theSocket.BeginConnect(remoteEP, connectedCallback, theSocket);
-
- SetXinTiao();//设置心跳参数
- }
- catch (Exception err)
- {
- SockErrorStr = err.ToString();
- return false;
- }
- if (TimeoutObject.WaitOne(2000, false))//直到timeout,或者TimeoutObject.set()
- {
- if (IsconnectSuccess)
- {
- return true;
- }
- else
- {
- return false;
- }
- }
- else
- {
- SockErrorStr = "Time Out";
- return false;
- }
-
- #endregion
- }
-
- }
- catch (SocketException se)
- {
- SockErrorStr = se.ToString();
- return false;
- }
- }
-
-
- ///
- /// 同步发送
- ///
- ///
- ///
- public static bool SendData(string dataStr)
- {
- bool result = false;
- if (dataStr == null || dataStr.Length < 0)
- return result;
- try
- {
- byte[] cmd = Encoding.Default.GetBytes(dataStr);
- int n = theSocket.Send(cmd);
- if (n < 1)
- result = false;
- }
- catch (Exception ee)
- {
- SockErrorStr = ee.ToString();
- result = false;
- }
- return result;
- }
- }
- }
三、源码下载 http://pan.baidu.com/share/link?shareid=2317450258&uk=2080437611