aceOrientation:(UIInterfaceOrientation)interfaceOrientation{
// ReturnYES for supported orientations
return(interfaceOrientation ==UIInterfaceOrientationPo
rtrait);//系统默认不支持旋转功能
}
要想让系统自动实现旋转功能仅需要实现上面的代码,把return (interfaceOrientation ==UIInterfaceOrientationPortrait)修改成为return OK即可。
修改后的代码为:
-(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation{
// ReturnYES for supported orientations
returnOK;
}
然后在使用自动调整属性设计界面(Apple+3),指定要支持的方向即可。
在使用模拟仿真器的时候,要让其自动旋转只需Apple+->(<-)即可。
2.在旋转是重构视图。(也即手动设置每一个控件的位置和大小,让其重新排列)
第一种方法基本上不需要编写代码,这种方法就需要写点代码了,毕竟重新设置每一个控件的坐标了嘛。
下面以我弄的一个为例子,例子的名称为IP_05Autosize。
例如,首先看这个图片:
在View中添加6个button,然后设定W和H分别为125和125,这样在横向的时候这三个button是会重叠的,因为在横向的时候Iphone支持的显示像素为480x300,没有状态栏的情况下是480x320.(在纵向时候显示像素为320x460,没有状态栏的情况下是320x480)。
现在就需要写代码重新排列这六个按钮了。
首先声明变量:
在IP_05AutosizeViewController.h中添加如下的代码:
#import <UIKit/UIKit.h>
@interface IP_05AutosizeViewController : UIViewController{
IBOutlet UIButton *button1;
IBOutlet UIButton *button2;
IBOutlet UIButton *button3;
IBOutlet UIButton *button4;
IBOutlet UIButton *button5;
IBOutlet UIButton *button6;
}
@property (nonatomic,retain)UIView *button1;
@property (nonatomic,retain)UIView *button2;
@property (nonatomic,retain)UIView *button3;
@property (nonatomic,retain)UIView *button4;
@property (nonatomic,retain)UIView *button5;
@property (nonatomic,retain)UIView *button6;
@end
然后在IP_05AutosizeViewController.m中,添加实现方法。
@implementation IP_05AutosizeViewController
@synthesize button1;
@synthesize button2;
@synthesize button3;
@synthesize button4;
@synthesize button5;
@synthesize button6;
-(void)willAnimateSecondHalfOfRotationFromInterfaceOrientation:(UIInterfaceOrientation)fromInterfaceOrientationduration:(NSTimeInterval)duration
{
UIInterfaceOrientationto=self.interfaceOrientation;
if(to == UIInterfaceOrientationPortrait || to ==UIInterfaceOrientationPortraitUpsideDown)
{
button1.frame = CGRectMake(20,20, 125, 125);
button2.frame = CGRectMake(175,20, 125, 125);
button3.frame = CGRectMake(20,168, 125, 125);
button4.frame = CGRectMake(175,168, 125, 125);
button5.frame = CGRectMake(20,315, 125, 125);
button6.frame = CGRectMake(175,315, 125, 125);
}
else
{
button1.frame = CGRectMake(20,20, 125, 125);
button2.frame = CGRectMake(20,155, 125, 125);
button3.frame = CGRectMake(177,20, 125, 125);
button4.frame = CGRectMake(177,155, 125, 125);
button5.frame = CGRectMake(328,20, 125, 125);
button6.frame = CGRectMake(328,155, 125, 125);
}
}
还需要修改-(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation的代码:
修改后为:
-(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
{
return (interfaceOrientation== UIInterfaceOrientationPortrait
|| interfaceOrientation ==UIInterfaceOrientationLandscapeLeft
|| interfaceOrientation ==UIInterfaceOrientationLandscapeRight);
}
然后在dealloc中释放资源:
- (void)dealloc
{
[button1 release];
[button2 release];
[button3 release];
[button4 release];
[button5 release];
[button6 release];
[super dealloc];
}
到此代码部分搞定,然后就是连接控制器和视图了。这点应该比较简单了。呵呵!
然后Build and Go最终结果为:
3.切换视图
这种方法使用于比较复杂的界面,是需要分别设计横向模式和纵向模式,然后在使用的过程中自动切换。
当然了这个也需要确定输出口和一些方法了。
首先定义输出口:
(简单描述,设计两个视图,一个定义为landscape,一个是portrait,一个为320x460,一个为480x300,每一个输出口分别和每个视图中的按钮想关联)
//用于切换的两个View
IBOutlet UIView *landscape;
IBOutlet UIView *portrait;
//Foo两个View中的Foo按钮
IBOutlet UIButton *landscapeFooButton;
IBOutlet UIButton *portraitFooButton;
//Bar两个View中的Bar按钮
IBOutlet UIButton *landscapeBarButton;
IBOutlet UIButton *portraitBarButton;
还需要File's Owner和两个View想关联。按住Ctrl将File'sOwner拖到Portrait上面,在弹出灰色菜单上选择Portrait同理选择Landscape。然后在按住Ctrl将File'sOwner拖到Landscape上面,在弹出的灰色菜单上选择View,让Landscape为自启动View。
然后是方法的实现:
-(void)willAnimateFirstHalfOfRotationToInterfaceOrientation:(UIInterfaceOrientation)toduration:(NSTimeInterval)duration
{
if(to == UIInterfaceOrientationPortrait)
{
self.view =self.portrait;
self.view.transform =CGAffineTransformIdentity;
self.view.transform =CGAffineTransformMakeRotation(degressToRadian(0));
self.view.bounds =CGRectMake(0.0, 0.0, 320.0, 460.0);
}
else if (to ==UIInterfaceOrientationLandscapeLeft)
{
self.view =self.landscape;
self.view.transform =CGAffineTransformIdentity;
self.view.transform =CGAffineTransformMakeRotation(degressToRadian(-90));
self.view.bounds =CGRectMake(0.0, 0.0, 460.0, 320.0);
}
else if (to ==UIInterfaceOrientationPortraitUpsideDown)
{
self.view =self.portrait;
self.view.transform =CGAffineTransformIdentity;
self.view.transform =CGAffineTransformMakeRotation(degressToRadian(180));
self.view.bounds =CGRectMake(0.0, 0.0, 320.0, 460.0);
}
else if (to ==UIInterfaceOrientationLandscapeRight)
{
self.view =self.landscape;
self.view.transform =CGAffineTransformIdentity;
self.view.transform =CGAffineTransformMakeRotation(degressToRadian(90));
self.view.bounds =CGRectMake(0.0, 0.0, 460.0, 320.0);
}
}
-(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
{
return YES;
}
不要忘了在dealloc中释放资源哦。
因为在上面的代码中使用到了CoreGraphics框架,因此要把该框架连接到该项目中,具体的方法是:在Resources上面点右键Add->ExistingFrameworks。然后就是查找路径了。我第一次就看错了没有找到,哎,做事情不下心呀!具体路径为:/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.2.1.sdk/System/Library/Frameworks/CoreGraphics.framework呵呵,这个路径是有点长不好找,记住不是在:/Developer/SDKs里面了,我刚开始就是找到呢里面了。呵呵!还有就是导入后会处理一个提示框,不要Copy,ReferenceType要选择Relative to Current SDK然后add就OK了。
例子中还有一个方法是对View中的按钮实现隐藏的,这个就比较简单了!
具体方法为:
-(IBAction)buttonPressed:(id)sender
{
if(sender == portraitFooButton||sender ==landscapeFooButton)
{
portraitFooButton.hidden=YES;
landscapeFooButton.hidden=YES;
}
else
{
portraitBarButton.hidden=YES;
landscapeBarButton.hidden=YES;
}
}
呵呵,上图两张看看:
刚开始运行时的图片
旋转后并且按了Foo按钮后的图片
想下载源代码的还去我的CSDN上面下载好了具体地址为:http://hanyegudeng.download.csdn.net/
欢迎指点!