以下摘录于我的一封邮件
TRK 是一个 安装在手机端,用来做on-device debug的 debug agent 程序。
如果安装了Carbide 2.0 以上版本, 可以在Carbide 安装目录的/plugins/com.nokia.carbide.trk.support_1.4.0.025 下找到TRK的sis包。
今天我试验了一下TRK, 现在可以用Carbide来直接调试在手机上运行的程序了。
以下是实验步骤:
1. Install Nokia Connectivity Cable Driver
http://europe.nokia.com/get-support-and-software/download-software/cable-drivers/driver-for-nokia-dke-2-dku-2-ca-42-ca-53-ca-70-ca-101
2. Connect the USB cable to PC side firstly, and then to phone side.
3. Choose PC suite as connect model
4. Automatic driver install on PC
5. Open TRK on phone
6. Setting > usb mode port : 1
7. connect
8. Open Carbide on PC
9 Help > on-device connection
10. Serial Port: COMX Nokia 6110 Navigator; Initial Service testing
11 finish
12 build a project for ARMV5 and generate sis file.
13 Debug configuration, create a debug session for Symbian OS Application TRK
14. Please make sure "Install each launch even if installer has not changed " and "Don't show isntall UI on phone" are checked under installation tab.
15 launch a debug session