/*This software uses a BSD license.Copyright (c) 2010, Sean Cross / chumby industriesAll rights reserved.Redistribution and use in source and binary forms, with or withoutmodification, are permitted provided that the following conditionsare met:* Redistributions of source code must retain the above copyrightnotice, this list of conditions and the following disclaimer.* Redistributions in binary form must reproduce the above copyrightnotice, this list of conditions and the following disclaimer in thedocumentation and/or other materials provided with thedistribution.* Neither the name of Sean Cross / chumby industries nor the namesof its contributors may be used to endorse or promote productsderived from this software without specific prior writtenpermission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOTLIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSSOF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSEDAND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANYWAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THEPOSSIBILITY OF SUCH DAMAGE.*/#include <stdio.h>#include <linux/i2c.h>#include <linux/i2c-dev.h>#include <fcntl.h>#include <stdlib.h>#include <unistd.h>#include <sys/ioctl.h>#include <string.h>#define I2C_FILE_NAME "/dev/i2c-1"#define USAGE_MESSAGE \"Usage:\n" \" %s r [addr] [register] " \"to read value from [register]\n" \" %s w [addr] [register] [value] " \"to write a value [value] to register [register]\n" \""static int set_i2c_register ( int file ,unsigned char addr ,unsigned char reg ,unsigned char value ) {unsigned char outbuf [ 2 ];struct i2c_rdwr_ioctl_data packets ;struct i2c_msg messages [ 1 ];messages [ 0 ]. addr = addr ;messages [ 0 ]. flags = 0 ;messages [ 0 ]. len = sizeof ( outbuf );messages [ 0 ]. buf = outbuf ;/* The first byte indicates which register we'll write */outbuf [ 0 ] = reg ;/** The second byte indicates the value to write. Note that for many* devices, we can write multiple, sequential registers at once by* simply making outbuf bigger.*/outbuf [ 1 ] = value ;/* Transfer the i2c packets to the kernel and verify it worked */packets . msgs = messages ;packets . nmsgs = 1 ;if ( ioctl ( file , I2C_RDWR , & packets ) < 0 ) {perror ( "Unable to send data" );return 1 ;}return 0 ;}static int get_i2c_register ( int file ,unsigned char addr ,unsigned char reg ,unsigned char * val ) {unsigned char inbuf , outbuf ;struct i2c_rdwr_ioctl_data packets ;struct i2c_msg messages [ 2 ];/** In order to read a register, we first do a "dummy write" by writing* 0 bytes to the register we want to read from. This is similar to* the packet in set_i2c_register, except it's 1 byte rather than 2.*/outbuf = reg ;messages [ 0 ]. addr = addr ;messages [ 0 ]. flags = 0 ;messages [ 0 ]. len = sizeof ( outbuf );messages [ 0 ]. buf = & outbuf ;/* The data will get returned in this structure */messages [ 1 ]. addr = addr ;messages [ 1 ]. flags = I2C_M_RD /* | I2C_M_NOSTART*/ ;messages [ 1 ]. len = sizeof ( inbuf );messages [ 1 ]. buf = & inbuf ;/* Send the request to the kernel and get the result back */packets . msgs = messages ;packets . nmsgs = 2 ;if ( ioctl ( file , I2C_RDWR , & packets ) < 0 ) {perror ( "Unable to send data" );return 1 ;}* val = inbuf ;return 0 ;}int main ( int argc , char ** argv ) {int i2c_file ;// Open a connection to the I2C userspace control file.if (( i2c_file = open ( I2C_FILE_NAME , O_RDWR )) < 0 ) {perror ( "Unable to open i2c control file" );exit ( 1 );}if ( argc > 3 && ! strcmp ( argv [ 1 ], "r" )) {int addr = strtol ( argv [ 2 ], NULL , 0 );int reg = strtol ( argv [ 3 ], NULL , 0 );unsigned char value ;if ( get_i2c_register ( i2c_file , addr , reg , & value )) {printf ( "Unable to get register! \n " );}else {printf ( "Register %d: %d (%x) \n " , reg , ( int ) value , ( int ) value );}}else if ( argc > 4 && ! strcmp ( argv [ 1 ], "w" )) {int addr = strtol ( argv [ 2 ], NULL , 0 );int reg = strtol ( argv [ 3 ], NULL , 0 );int value = strtol ( argv [ 4 ], NULL , 0 );if ( set_i2c_register ( i2c_file , addr , reg , value )) {printf ( "Unable to get register! \n " );}else {printf ( "Set register %x: %d (%x) \n " , reg , value , value );}}else {fprintf ( stderr , USAGE_MESSAGE , argv [ 0 ], argv [ 0 ]);}close ( i2c_file );return 0 ;}
Linux i2c 读写应用程序
最新推荐文章于 2024-05-06 22:17:47 发布