Debian下 出现错误: no suitable device found

最新推荐文章于 2025-07-02 10:55:39 发布
原创 最新推荐文章于 2025-07-02 10:55:39 发布 · 1.6k 阅读 · 0 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#debian

  

 今天执行libnids程序时， 出现错误: no suitable device found；

经过网上查找和自己的调试。结果是要用root权限才可以执行找到device设备。

sudo  ./***   

 OK ,搞定。但是还是没有输出我想要的信息。等下再调试。

解决启用Centos系统网卡时提示“Error：Connection activation failed:No suitable device found for this connection ”
CoffeMilk的博客
10-28 2472
当我们手动配置了指定网卡的配置文件内容，使用启用网卡命令【ifup ens37】时提示“Error：Connection activation failed:No suitable device found for this connection (device lo not available because device is strictly unmanaged).”错误信息（翻译过来就是【错误：连接激活失败：找不到此连接的合适设备（设备不可用，因为设备严格未被管理】）
Debian系统dhcp server配置— kea
Black_黑色的博客
06-22 1184
记录一次kea-dhcp4server的配置 系统及架构： Linux Matrix_061001 5.10.42-yocto-standard #1 Thu Jun 3 07:00:52 UTC 2021 armv7l armv7l armv7l GNU/Linux 参考文章： https://kea.readthedocs.io/en/kea-1.8.0/arm/config.html https://blog.csdn.net/z475382220/article/details/78844227 首
Error:No suitable device found: no device found for connection "System eth0"
自强不息
07-17 189
环境描述： Virtual Box 下的虚拟机Rhel6u2 X64 故障说明： 在克隆几台虚拟机，发现启动后不能配置IP地址等信息，使用linux命令: “ifup eth0”也不能激活网卡， 而在使用"service network restart"，出现错误： Error:No suitable device found: no device found for co...
解决 Error:No suitable device found: no device found for connection "System eth0"
热门推荐
七夜之家
02-03 8万+
解决使用VMware克隆出来的新虚拟机无法联网的问题 一．背景    我们安装好了一个虚拟机，我想做分布式集群，想模拟几台服务器，这时就想直接复制已经有的安装好的虚拟机，这样比较省事，不要在重复的安装虚拟机并配置JAVA环境，省掉做同样的事情，这时直接复制，这样之前配置的JAVA环境都有了。 二.问题    这时我复制好的虚拟机，启动登陆进去（用户名和密码跟之前那台是一
tcpdump: no suitable device found
08-18 1653
hao@tigerrr:~$ tcpdump                           tcpdump: no suitable device found 问题分析及解决： 2种原因： 1.权限不够，一般不经过处理，只用root用户能使用tcpdump
tcpdump: no suitable device foun…
极客剑
11-13 1030
1、tcpdump: no suitable device found 问题分析及解决： 2种原因： 1.权限不够，一般不经过处理，只用root用户能使用tcpdump  , sudo ./tcpdump 2.缺省只能同时使用4个tcpdump，如用完，则报此类错。需要停掉多余的tcpdump 2、 fedora 14 中运行make install 命令也要加上 sudo 3、出现 种提示 l
end=27 账号=339427160 time = 20251018 339427160 = 1 键 'time' 存在于文件中。 time=20251018 计算出的日期=20251018 339427160=1 图片=C:\Users\Administrator\Desktop\MakeMoney\images\xunijitanchuang.bmp 图像识别准确度：0.22393609583377838 start_self=0 Graphics Device initialization failed for : d3d, sw Error initializing QuantumRenderer: no suitable pipeline found java.lang.RuntimeException: java.lang.RuntimeException: Error initializing QuantumRenderer: no suitable pipeline found at com.sun.javafx.tk.quantum.QuantumRenderer.getInstance(QuantumRenderer.java:280) at com.sun.javafx.tk.quantum.QuantumToolkit.init(QuantumToolkit.java:222) at com.sun.javafx.tk.Toolkit.getToolkit(Toolkit.java:260) at com.sun.javafx.application.PlatformImpl.startup(PlatformImpl.java:267) at com.sun.javafx.application.PlatformImpl.startup(PlatformImpl.java:158) at javafx.embed.swing.JFXPanel.lambda$initFx$1(JFXPanel.java:234) at java.base/java.lang.Thread.run(Thread.java:842) Caused by: java.lang.RuntimeException: Error initializing QuantumRenderer: no suitable pipeline found at com.sun.javafx.tk.quantum.QuantumRenderer$PipelineRunnable.init(QuantumRenderer.java:94) at com.sun.javafx.tk.quantum.QuantumRenderer$PipelineRunnable.run(QuantumRenderer.java:124) ... 1 more Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: No toolkit found at com.sun.javafx.tk.Toolkit.getToolkit(Toolkit.java:272) at com.sun.javafx.application.PlatformImpl.startup(PlatformImpl.java:267) at com.sun.javafx.application.PlatformImpl.startup(PlatformImpl.java:158) at javafx.embed.swing.JFXPanel.lambda$initFx$1(JFXPanel.java:234) at java.base/java.lang.Thread.run(Thread.java:842)
最新发布
10-19
我们遇到了一个JavaFX图形设备初始化失败的问题，错误信息显示："no suitable pipeline found"。这通常是由于缺少必要的图形渲染环境导致的。以下是详细的解决步骤： ### 核心问题分析 错误栈表明JavaFX无法初始化...
Kit Selection The following kits can be used for project cal: Type to filter kits by name. No suitable kits found. Add a kit in the options or via the maintenance tool of the SDK.
08-01
### 解决 Qt Kit Selection 中 "No Suitable Kits Found" 的问题 在使用 Qt Creator 创建项目时，如果 Kit Selection 页面显示 "No Suitable Kits Found"，通常是因为 Qt Creator 没有正确配置所需的开发工具链...
ucar_ws$ catkin_make Base path: /home/haha/ucar_ws Source space: /home/haha/ucar_ws/src Build space: /home/haha/ucar_ws/build Devel space: /home/haha/ucar_ws/devel Install space: /home/haha/ucar_ws/install #### #### Running command: "cmake /home/haha/ucar_ws/src -DCATKIN_DEVEL_PREFIX=/home/haha/ucar_ws/devel -DCMAKE_INSTALL_PREFIX=/home/haha/ucar_ws/install -G Unix Makefiles" in "/home/haha/ucar_ws/build" #### CMake Warning (dev) in CMakeLists.txt: No project() command is present. The top-level CMakeLists.txt file must contain a literal, direct call to the project() command. Add a line of code such as project(ProjectName) near the top of the file, but after cmake_minimum_required(). CMake is pretending there is a "project(Project)" command on the first line. This warning is for project developers. Use -Wno-dev to suppress it. -- The C compiler identification is GNU 9.4.0 -- The CXX compiler identification is GNU 9.4.0 -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Using CATKIN_DEVEL_PREFIX: /home/haha/ucar_ws/devel -- Using CMAKE_PREFIX_PATH: /home/haha/gazebo_test_ws/devel;/home/haha/catkin_ws/devel;/opt/ros/noetic -- This workspace overlays: /home/haha/gazebo_test_ws/devel;/home/haha/catkin_ws/devel;/opt/ros/noetic -- Found PythonInterp: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3") -- Using PYTHON_EXECUTABLE: /usr/bin/python3 -- Using Debian Python package layout -- Found PY_em: /usr/lib/python3/dist-packages/em.py -- Using empy: /usr/lib/python3/dist-packages/em.py -- Using CATKIN_ENABLE_TESTING: ON -- Call enable_testing() -- Using CATKIN_TEST_RESULTS_DIR: /home/haha/ucar_ws/build/test_results -- Forcing gtest/gmock from source, though one was otherwise available. -- Found gtest sources under '/usr/src/googletest': gtests will be built -- Found gmock sources under '/usr/src/googletest': gmock will be built -- Found PythonInterp: /usr/bin/python3 (found version "3.8.10") -- Found Threads: TRUE -- Using Python nosetests: /usr/bin/nosetests3 -- catkin 0.8.12 -- BUILD_SHARED_LIBS is on -- BUILD_SHARED_LIBS is on -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- ~~ traversing 39 packages in topological order: -- ~~ - geometry (metapackage) -- ~~ - geometry2 (metapackage) -- ~~ - navigation (metapackage) -- ~~ - eigen_conversions -- ~~ - kdl_conversions -- ~~ - tf2_msgs -- ~~ - tf2 -- ~~ - tf2_bullet -- ~~ - tf2_eigen -- ~~ - map_server -- ~~ - speech_command -- ~~ - tf2_py -- ~~ - tf -- ~~ - fdilink_ahrs -- ~~ - tf2_geometry_msgs -- ~~ - amcl -- ~~ - fake_localization -- ~~ - tf2_kdl -- ~~ - test_tf2 -- ~~ - tf2_sensor_msgs -- ~~ - tf2_tools -- ~~ - tf_conversions -- ~~ - ucar_camera -- ~~ - ucar_controller -- ~~ - ucar_map -- ~~ - ucar_nav -- ~~ - voxel_grid -- ~~ - costmap_2d -- ~~ - nav_core -- ~~ - base_local_planner -- ~~ - carrot_planner -- ~~ - clear_costmap_recovery -- ~~ - dwa_local_planner -- ~~ - move_slow_and_clear -- ~~ - navfn -- ~~ - global_planner -- ~~ - rotate_recovery -- ~~ - move_base -- ~~ - ydlidar -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- +++ processing catkin metapackage: 'geometry' -- ==> add_subdirectory(geometry/geometry) -- +++ processing catkin metapackage: 'geometry2' -- ==> add_subdirectory(geometry2/geometry2) -- +++ processing catkin metapackage: 'navigation' -- ==> add_subdirectory(navigation/navigation) -- +++ processing catkin package: 'eigen_conversions' -- ==> add_subdirectory(geometry/eigen_conversions) -- +++ processing catkin package: 'kdl_conversions' -- ==> add_subdirectory(geometry/kdl_conversions) -- +++ processing catkin package: 'tf2_msgs' -- ==> add_subdirectory(geometry2/tf2_msgs) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: thread -- Generating .msg files for action tf2_msgs/LookupTransform /home/haha/ucar_ws/src/geometry2/tf2_msgs/action/LookupTransform.action Generating for action LookupTransform -- tf2_msgs: 9 messages, 1 services -- +++ processing catkin package: 'tf2' -- ==> add_subdirectory(geometry2/tf2) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: system thread -- +++ processing catkin package: 'tf2_bullet' -- ==> add_subdirectory(geometry2/tf2_bullet) -- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.1") -- Checking for module 'bullet' -- Found bullet, version 2.88 -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'tf2_eigen' -- ==> add_subdirectory(geometry2/tf2_eigen) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'map_server' -- ==> add_subdirectory(navigation/map_server) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Bullet: /usr/lib/x86_64-linux-gnu/libBulletDynamics.so -- Found SDL: /usr/lib/x86_64-linux-gnu/libSDLmain.a;/usr/lib/x86_64-linux-gnu/libSDL.so;-lpthread (found version "1.2.15") -- Found SDL_image: /usr/lib/x86_64-linux-gnu/libSDL_image.so (found version "1.2.12") -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: filesystem -- +++ processing catkin package: 'speech_command' -- ==> add_subdirectory(speech_command) -- +++ processing catkin package: 'tf2_py' -- ==> add_subdirectory(geometry2/tf2_py) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found suitable version "3.8.10", minimum required is "2") -- +++ processing catkin package: 'tf' -- ==> add_subdirectory(geometry/tf) -- Performing Test COMPILER_SUPPORTS_CXX11 -- Performing Test COMPILER_SUPPORTS_CXX11 - Success -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: thread system -- tf: 1 messages, 1 services -- +++ processing catkin package: 'fdilink_ahrs' -- ==> add_subdirectory(fdilink_ahrs) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'tf2_geometry_msgs' -- ==> add_subdirectory(geometry2/tf2_geometry_msgs) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: thread -- +++ processing catkin package: 'amcl' -- ==> add_subdirectory(navigation/amcl) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") -- Looking for unistd.h -- Looking for unistd.h - found -- Looking for drand48 -- Looking for drand48 - found -- +++ processing catkin package: 'fake_localization' -- ==> add_subdirectory(navigation/fake_localization) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'tf2_kdl' -- ==> add_subdirectory(geometry2/tf2_kdl) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'test_tf2' -- ==> add_subdirectory(geometry2/test_tf2) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: thread -- +++ processing catkin package: 'tf2_sensor_msgs' -- ==> add_subdirectory(geometry2/tf2_sensor_msgs) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'tf2_tools' -- ==> add_subdirectory(geometry2/tf2_tools) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'tf_conversions' -- ==> add_subdirectory(geometry/tf_conversions) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'ucar_camera' -- ==> add_subdirectory(ucar_camera) -- +++ processing catkin package: 'ucar_controller' -- ==> add_subdirectory(ucar_controller) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- ucar_controller: 0 messages, 6 services -- +++ processing catkin package: 'ucar_map' -- ==> add_subdirectory(ucar_map) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'ucar_nav' -- ==> add_subdirectory(ucar_nav) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'voxel_grid' -- ==> add_subdirectory(navigation/voxel_grid) -- Looking for sys/time.h -- Looking for sys/time.h - found -- +++ processing catkin package: 'costmap_2d' -- ==> add_subdirectory(navigation/costmap_2d) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: system thread -- costmap_2d: 1 messages, 0 services -- +++ processing catkin package: 'nav_core' -- ==> add_subdirectory(navigation/nav_core) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'base_local_planner' -- ==> add_subdirectory(navigation/base_local_planner) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found version "1.71.0") found components: thread -- base_local_planner: 1 messages, 0 services -- +++ processing catkin package: 'carrot_planner' -- ==> add_subdirectory(navigation/carrot_planner) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'clear_costmap_recovery' -- ==> add_subdirectory(navigation/clear_costmap_recovery) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'dwa_local_planner' -- ==> add_subdirectory(navigation/dwa_local_planner) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'move_slow_and_clear' -- ==> add_subdirectory(navigation/move_slow_and_clear) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'navfn' -- ==> add_subdirectory(navigation/navfn) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- navfn: 0 messages, 2 services -- Looking for C++ include FL/Fl.H -- Looking for C++ include FL/Fl.H - found -- Looking for C++ include pgm.h -- Looking for C++ include pgm.h - not found -- NAVFN_HAVE_FLTK: 1, NETPBM: -- FLTK orf NETPBM not found: cannot build navtest -- +++ processing catkin package: 'global_planner' -- ==> add_subdirectory(navigation/global_planner) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'rotate_recovery' -- ==> add_subdirectory(navigation/rotate_recovery) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'move_base' -- ==> add_subdirectory(navigation/move_base) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'ydlidar' -- ==> add_subdirectory(ydlidar) -- Configuring done -- Generating done -- Build files have been written to: /home/haha/ucar_ws/build #### #### Running command: "make -j2 -l2" in "/home/haha/ucar_ws/build" #### Scanning dependencies of target std_msgs_generate_messages_py Scanning dependencies of target geometry_msgs_generate_messages_eus [ 0%] Built target std_msgs_generate_messages_py [ 0%] Built target geometry_msgs_generate_messages_eus Scanning dependencies of target geometry_msgs_generate_messages_cpp Scanning dependencies of target geometry_msgs_generate_messages_py [ 0%] Built target geometry_msgs_generate_messages_cpp [ 0%] Built target geometry_msgs_generate_messages_py Scanning dependencies of target geometry_msgs_generate_messages_nodejs Scanning dependencies of target std_msgs_generate_messages_cpp [ 0%] Built target geometry_msgs_generate_messages_nodejs [ 0%] Built target std_msgs_generate_messages_cpp Scanning dependencies of target geometry_msgs_generate_messages_lisp Scanning dependencies of target std_msgs_generate_messages_eus [ 0%] Built target geometry_msgs_generate_messages_lisp [ 0%] Built target std_msgs_generate_messages_eus Scanning dependencies of target std_msgs_generate_messages_lisp Scanning dependencies of target std_msgs_generate_messages_nodejs [ 0%] Built target std_msgs_generate_messages_lisp [ 0%] Built target std_msgs_generate_messages_nodejs Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_LookupTransformGoal Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_LookupTransformActionResult [ 0%] Built target _tf2_msgs_generate_messages_check_deps_LookupTransformActionResult [ 0%] Built target _tf2_msgs_generate_messages_check_deps_LookupTransformGoal Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_TF2Error Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_LookupTransformAction [ 0%] Built target _tf2_msgs_generate_messages_check_deps_TF2Error [ 0%] Built target _tf2_msgs_generate_messages_check_deps_LookupTransformAction Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_TFMessage Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_LookupTransformActionGoal [ 0%] Built target _tf2_msgs_generate_messages_check_deps_TFMessage Scanning dependencies of target actionlib_msgs_generate_messages_nodejs [ 0%] Built target _tf2_msgs_generate_messages_check_deps_LookupTransformActionGoal [ 0%] Built target actionlib_msgs_generate_messages_nodejs Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_LookupTransformActionFeedback Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_LookupTransformResult [ 0%] Built target _tf2_msgs_generate_messages_check_deps_LookupTransformActionFeedback [ 0%] Built target _tf2_msgs_generate_messages_check_deps_LookupTransformResult Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_LookupTransformFeedback Scanning dependencies of target _tf2_msgs_generate_messages_check_deps_FrameGraph [ 0%] Built target _tf2_msgs_generate_messages_check_deps_LookupTransformFeedback [ 0%] Built target _tf2_msgs_generate_messages_check_deps_FrameGraph Scanning dependencies of target actionlib_msgs_generate_messages_py Scanning dependencies of target actionlib_msgs_generate_messages_lisp [ 0%] Built target actionlib_msgs_generate_messages_py [ 0%] Built target actionlib_msgs_generate_messages_lisp Scanning dependencies of target actionlib_msgs_generate_messages_cpp Scanning dependencies of target actionlib_msgs_generate_messages_eus [ 0%] Built target actionlib_msgs_generate_messages_cpp [ 0%] Built target actionlib_msgs_generate_messages_eus Scanning dependencies of target roscpp_generate_messages_cpp Scanning dependencies of target gtest [ 0%] Built target roscpp_generate_messages_cpp Scanning dependencies of target nav_msgs_generate_messages_lisp [ 0%] Built target nav_msgs_generate_messages_lisp Scanning dependencies of target nav_msgs_generate_messages_eus [ 1%] Building CXX object gtest/googletest/CMakeFiles/gtest.dir/src/gtest-all.cc.o [ 1%] Built target nav_msgs_generate_messages_eus Scanning dependencies of target roscpp_generate_messages_lisp [ 1%] Built target roscpp_generate_messages_lisp Scanning dependencies of target nav_msgs_generate_messages_cpp [ 1%] Built target nav_msgs_generate_messages_cpp Scanning dependencies of target rosgraph_msgs_generate_messages_eus [ 1%] Built target rosgraph_msgs_generate_messages_eus Scanning dependencies of target rosgraph_msgs_generate_messages_cpp [ 1%] Built target rosgraph_msgs_generate_messages_cpp Scanning dependencies of target roscpp_generate_messages_nodejs [ 1%] Built target roscpp_generate_messages_nodejs Scanning dependencies of target roscpp_generate_messages_py [ 1%] Built target roscpp_generate_messages_py Scanning dependencies of target rosgraph_msgs_generate_messages_nodejs [ 1%] Built target rosgraph_msgs_generate_messages_nodejs Scanning dependencies of target roscpp_generate_messages_eus [ 1%] Built target roscpp_generate_messages_eus Scanning dependencies of target rosgraph_msgs_generate_messages_lisp [ 1%] Built target rosgraph_msgs_generate_messages_lisp Scanning dependencies of target nav_msgs_generate_messages_nodejs [ 1%] Built target nav_msgs_generate_messages_nodejs Scanning dependencies of target nav_msgs_generate_messages_py [ 1%] Built target nav_msgs_generate_messages_py Scanning dependencies of target rosgraph_msgs_generate_messages_py [ 1%] Built target rosgraph_msgs_generate_messages_py Scanning dependencies of target audio_recorder [ 1%] Building CXX object speech_command/CMakeFiles/audio_recorder.dir/src/AudioRecorder.cpp.o In file included from /home/haha/ucar_ws/src/speech_command/include/AudioRecorder.h:4, from /home/haha/ucar_ws/src/speech_command/src/AudioRecorder.cpp:1: /home/haha/ucar_ws/src/speech_command/include/hidapi.h:34:23: warning: ISO C++ forbids converting a string constant to ‘char*’ [-Wwrite-strings] 34 | char *device_index = "iflytek"; | ^~~~~~~~~ [ 2%] Linking CXX shared library /home/haha/ucar_ws/devel/lib/libaudio_recorder.so /usr/bin/ld: 当搜索用于 /home/haha/ucar_ws/src/speech_command/lib/arm64/libhid_lib.so 时跳过不兼容的 -lhid_lib /usr/bin/ld: 找不到 -lhid_lib /usr/bin/ld: 当搜索用于 /home/haha/ucar_ws/src/speech_command/lib/arm64/libmsc.so 时跳过不兼容的 -lmsc /usr/bin/ld: 找不到 -lmsc collect2: error: ld returned 1 exit status make[2]: *** [speech_command/CMakeFiles/audio_recorder.dir/build.make:84：/home/haha/ucar_ws/devel/lib/libaudio_recorder.so] 错误 1 make[1]: *** [CMakeFiles/Makefile2:4943：speech_command/CMakeFiles/audio_recorder.dir/all] 错误 2 make[1]: *** 正在等待未完成的任务.... [ 2%] Linking CXX shared library ../lib/libgtest.so [ 2%] Built target gtest make: *** [Makefile:141：all] 错误 2 Invoking "make -j2 -l2" failed 什么问题并给我一个详细的解决方法
07-09
我们正在解决ROS catkin_make编译时出现的链接错误，具体是找不到`-lhid_lib`和`-lmsc`库。根据错误信息，链接器在尝试链接`audio_recorder`节点时失败，因为无法找到这两个库。以下将逐步分析原因并提供解决方案。 ...
No suitable device found for this connection
qq_15138049的博客
01-09 579
MobaXterm连接不上 journal -xe audit: op="connection-activate" uuid="88e43cb2-b1e5-49a4-85bf-1e3f08f4e605" n Jan 10 04:47:03 hadoop03 network[11697]: Bringing up interface ens33: Error: Connection activation failed: uuid="88e43cb2-b1e5-49a4-85bf-1e3f08f4e605"
No suitable device found: no device found for connection ‘eth0‘
Knowledge_dai的博客
11-15 1322
问题： centos 7 配置static IP后重启 network 服务出现错误 ：No suitable device found: no device found for connection ‘eth0’。 将 ifconfig 查看的结果中的 HWaddr 的值粘贴到 /etc/sysconfig/network-scripts/ifcfg-eth0 中重启服务即可 ...
linux No suitable device found: no device found for connection 'System eth0'
congjiong8459的博客
08-17 288
在对network 进行restart 提示如下信息 点击(此处)折叠或打开 [root@mhxy171 ~]# service network rest...
service network restart报错:No suitable device found : no device found for connection 'System eth0'.
Super__Ren的博客
08-07 837
虚拟机被玩崩了，hadoop重装过程中使用了多个虚拟机来模拟集群。只配置了主机的各项参数，其他的节点（主机）是克隆主机克隆粗来的。克隆完成打开以后，首先修改了其IP，然后网络服务重启（service network restart）就报错了：No suitable device found : no device found for connection 'System eth0'.如下图： ...
No suitable device found for this connection.（CentOS7）问题解决办法
qq_35997331的博客
04-30 2342
No suitable device found for this connection.（CentOS7）问题解决办法 一、我遇到的问题分析 前几天用还好好的，结果今天没有任何改变就莫名起不来了，我的第一感觉是，是不是windows更新导致的，于是检查了下更新是一周前更新的更新完也是没问题的，然后就开始百度各种帖子。 二、参考各种方法 **1、**修改/etc/sysconfig/network...
GRUB- "No suitable mode found"
weixin_30252155的博客
10-20 2387
If you get this error when booting any menuentry: error: no suitable mode found Booting however Then you need to initialize GRUB graphical terminal (gfxterm) with proper video mode (gfxmode)...
解决 Error:No suitable device found: no device found for connection "System eth0"
在前进的路上
11-20 1万+
这时我复制好的虚拟机，启动登陆进去（用户名和密码跟之前那台是一样的），修改好IPADDR，然后网卡重启出现问题？ #service network restart 出现问题：Error:No suitable device found: no device found for connection "System eth0"
故障：Error: Connection activation failed: No suitable device found for this connection (device lo ...
weixin_44084487的博客
07-02 707
Error: Connection activation failed: No suitable device found for this connection (device lo not available because device is strictly unmanaged).
Error: Connection activation failed: No suitable device found for this connection
JianT的博客
04-01 1865
原因：网卡配置问题解决方式：重启网卡。
jupyter notebook报错：No suitable pdf to png renderer found.怎么解决
09-17
很抱歉，我不能帮助你解决 jupyter notebook 报错：No suitable pdf to png renderer found。但是你可以尝试搜索相关信息，或者向一位技术专家寻求帮助。 ### 回答2： Jupyter Notebook 报错 "No suitable pdf to ...
评论 3
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值