wifi p2p 调试

调试p2p功能之前，需要驱动打开p2p的支持，可以用ifconfig -a指令查看是否存在p2p网络节点

  1、查看网络节点

341.68< ifconfig -a

  341.71> ifconfig -a

  341.95> carplay0  Link encap:Ethernet  HWaddr DE:8A:1E:E6:91:9F 

  341.95>           BROADCAST MULTICAST  MTU:1500  Metric:1

  341.95>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0

  341.95>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

  341.95>           collisions:0 txqueuelen:1000

  341.95>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

  341.95>

  341.95> eth0      Link encap:Ethernet  HWaddr DE:F0:8D:8F:D1:B1 

  341.95>           BROADCAST MULTICAST  MTU:1500  Metric:1

  341.95>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0

  341.95>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

  341.96>           collisions:0 txqueuelen:1000

  341.96>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

  341.96>           Interrupt:114

  341.96>

  341.96> lo        Link encap:Local Loopback 

  341.96>           inet addr:127.0.0.1  Mask:255.0.0.0

  341.96>           inet6 addr: ::1%4812464/128 Scope:Host

  341.96>           UP LOOPBACK RUNNING  MTU:65536  Metric:1

  341.96>           RX packets:21 errors:0 dropped:0 overruns:0 frame:0

  341.96>           TX packets:21 errors:0 dropped:0 overruns:0 carrier:0

  341.96>           collisions:0 txqueuelen:1000

  341.96>           RX bytes:1747 (1.7 KiB)  TX bytes:1747 (1.7 KiB)

  341.96>

  341.96> mlan0     Link encap:Ethernet  HWaddr 8C:45:00:04:02:93 

  341.96>           inet addr:192.168.0.22  Bcast:192.168.0.255  Mask:255.255.255.0

  341.96>           UP BROADCAST MULTICAST  MTU:1500  Metric:1

  341.96>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0

  341.96>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

  341.96>           collisions:0 txqueuelen:1000

  341.96>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

  341.96>

  341.96> uap0      Link encap:Ethernet  HWaddr 8C:45:00:04:03:93 

  341.96>           BROADCAST MULTICAST  MTU:1500  Metric:1

  341.96>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0

  341.96>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

  341.96>           collisions:0 txqueuelen:1000

  341.96>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

  341.96>

  341.96> uap1      Link encap:Ethernet  HWaddr 8C:45:00:04:04:93 

  341.96>           BROADCAST MULTICAST  MTU:1500  Metric:1

  341.96>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0

  341.96>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

  341.96>           collisions:0 txqueuelen:1000

  341.96>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

  341.96>

  341.96> wfd0      Link encap:Ethernet  HWaddr 8E:45:00:04:02:93 

  341.98>           BROADCAST MULTICAST  MTU:1500  Metric:1

  341.98>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0

  341.98>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

  341.98>           collisions:0 txqueuelen:1000

  341.98>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

2、启动wpa_supplicant （同时启动wifi p2p和sta）

   448.95< wpa_supplicant -iwfd0 -Dnl80211 -c/home/root/p2p.conf -N -imlan0 -c/home/root/test.conf -B

  448.98> wpa_supplicant -iwfd0 -Dnl80211 -c/home/root/p2p.conf -N -imlan0 -c/home/root/test.conf -B

  449.07> Successfully initialized wpa_supplicant

  449.07> [   96.835531] get_channel when STA is not connected

  449.07> [   96.841396] get_channel when STA is not connected

  449.09> [   96.847810] cyttsp6_i2c_adapter 2-0024: _cyttsp6_watchdog_work: device found in bootloader mode

  449.09> [   96.857353] get_channel when STA is not connected

  449.09> [   96.862738] get_channel when STA is not connected

  449.09> [   96.870589] get_channel when STA is not connected

  449.15> [   96.915558] get_channel when STA is not connected

  449.15> [   96.922189] get_channel when STA is not connected

  449.15> [   96.928465] get_channel when STA is not connected

  449.15> [   96.933730] get_channel when STA is not connected

  449.15> [   96.940273] get_channel when STA is not connected

3、启动wap_cli工具

541.56< wpa_cli -iwfd0

  541.59> wpa_cli -iwfd0

  541.62> wpa_cli v2.6

  541.64> Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi> and contributors

  541.64> This software may be distributed under the terms of the BSD license.

  541.64> See README for more details.

  541.64> Interactive mode

4、p2p测试

 625.60< p2p_find 10

  625.62> p2p_find 10

  625.62> > OK

  625.64> > > [  273.425512] wlan: wfd0 START SCAN

2265.62> > <3>P2P-DEVICE-FOUND b6:c4:fc:e0:bf:d0 p2p_dev_addr=b6:c4:fc:e0:bf:d0 pri_dev_type=10-0050F204-5 name='Redmi' config_methods=0x188 dev_capab=0x25 group_capab=0x0 new=1

2446.48< p2p_peers

 2446.50> p2p_peers

 2446.50> b6:c4:fc:e0:bf:d0

 

2767.07< p2p_connect  b6:c4:fc:e0:bf:d0 pbc (需要打开车机的热点)

2459.18< p2p_connect 2e:0e:3d:4d:90:e7 pbc

 2459.21> p2p_connect 2e:0e:3d:4d:90:e7 pbc

 2459.23> OK

2459.23> > > [  124.596059] wlan: TX P2P Group Owner Negotiation Req Frame, channel=1

 2459.65> [  125.033239] wlan: TX P2P Group Owner Negotiation Req Frame, channel=1

...

 2464.21> [  129.588162] wlan: RX P2P Group Owner Negotiation Req Frame, channel=1

...

2464.60> > <3>CTRL-EVENT-CONNECTED - Connection to 8e:45:00:04:02:93 completed [id=0 id_str=]

 2464.60> > <3>WPS-PBC-ACTIVE

 2464.26> [  129.595560] wlan: TX P2P Group Owner Negotiation Rsp Frame, channel=1

...

2465.81> > <3>WPS-REG-SUCCESS 2e:0e:3d:4d:10:e7 70fe8410-3499-5d77-9007-86190cba6220

 2465.84> > <3>P2P-GROUP-FORMATION-SUCCESS

 2465.84> > <3>P2P-GROUP-STARTED wfd0 GO ssid="DIRECT-J4" freq=5240 passphrase="gHyeDd38" go_dev_addr=8e:45:00:04:02:93

 2465.84> > <3>WPS-PBC-DISABLE

 2465.84> > <3>WPS-SUCCESS