Windows下qt-creator 调试器的设置

1.下载qt-opensource-windows-x86-vs2010-4.8.6.exe

网址如下:

https://download.qt.io/archive/qt/4.8/4.8.6/qt-opensource-windows-x86-vs2010-4.8.6.exe

下完找个地方安即可

2.下载qt-creator-windows-opensource-2.8.0

网址如下:

https://download.qt.io/official_releases/qtcreator/2.8/2.8.0/qt-creator-windows-opensource-2.8.0.exe

Qt creator仅仅是个IDE，里面没有编译器和调试器，需要配置，当我们装了VS2010后，Qt Creator会自动检测到。

但是调试器需要用到cdb.exe 而不是VS2010自带的调试器Windbg, 所以我们要去下载安装调试器。

网址：

下载VS2010对应的CDB，下载网址：
http://www.microsoft.com/en-us/download/confirmation.aspx?id=11800

安装完成，到Qt creator里面设置调试器为cdb.exe .

另外,说一下几个调试器的区别：

WinDbg, NTSD, CDB, and KD all share the same debugging engine, so they share all the same commands. The only differences between them is that WinDbg has GUI interface, NTSD, CDB and KD have console interfaces, NTSD and CDB only support user mode debugging, KD only supports kernel mode, while WinDbg supports both.