ARM9内存控制

内存控制寄存器：
1 共有8个BANK，描述如下：
The S3C2440A has the following features:
— Little/Big endian (selectable by a software)
— Address space: 128Mbytes per bank (total 1GB/8 banks)
— Programmable access size (8/16/32-bit) for all banks except bank0 (16/32-bit)
— Total 8 memory banks
Six memory banks for ROM, SRAM, etc.
Remaining two memory banks for ROM, SRAM, SDRAM, etc .
— Seven fixed memory bank start address
— One flexible memory bank start address and programmable bank size
— Programmable access cycles for all memory banks
— External wait to extend the bus cycles
— Supporting self-refresh and power down mode in SDRAM

Bank7 的开始地址是灵活的，BANK6/7可以片远SDRAM，但其大小应该一样

2 OM[1:0] 引脚决定启动方式
  BANK0如果是8位，则地址线从A0开始，如果为16位则地址线从A1开始，如果为32位则地址线从A2开始
  且内存的BANK_LOGIC引脚与CPU哪个地址线相连手册中也是有规定的。
 
3 某些引脚需要对比原理图来决定，相关时序也要仔细看，不过可以