1.VDD_SIM 一定要有1.8V的电源(需要1.8V是根据gpio127输出电平为1.8V)
2.PBIAS 必须正确设置,设置VDDS_SIM电压,PWRDNZ和VMODE,检测VMODEERROR
3.寄存器地址必须设置正确,源码的地址设置是错误的
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122(0xa24)
#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122(0xa24)
http://e2e.ti.com/support/dsp/omap_applications_processors/f/447/t/41579.aspx
http://e2e.ti.com/support/dsp/omap_applications_processors/f/447/p/70993/257491.aspx
http://processors.wiki.ti.com/index.php?title=Additional_Configuration_for_GPIO120-129_on_OMAP35x