mdev支持热拔插，u盘自动挂载

使用命令：fdisk -l，查看系统硬盘和分区情况  

使用df查看挂载情况

[root@iTOP-iMX6]# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root             15017904    440472  13814552   3% /
tmpfs                   911884         0    911884   0% /dev/shm
/dev/sda1             29893504   6028992  23864512  20% /mnt

 

挂载：mount /dev/sda1 /mnt/disk/

取消挂载：umount /dev/sda1 或者 umount /mnt/disk

配置 busybox，支持mdev

make menuconfig

添加对热插拔事件响应，实现 U 盘自动挂载与卸载 ，下面是一步一步创建。

1.在etc下创建mdev.conf，输入

sd[a-z][0-9] 0:0 777 @ echo "insert udisk" > /dev/console
sd[a-z] 0:0 777 $ echo "remove udisk" > /dev/console

其中：

@：创建设备节点之后执行命令
$：删除设备节点之前执行命令
*: 创建设备节点之后 和 删除设备节点之前 执行命令

到时只需在创建是添加mount /dev/$MDEV /mnt/udisk，

删除时添加umount /mnt/udisk

2.修改mdev.conf

#sd[a-z][0-9] 0:0 777 @ echo "insert udisk" > /dev/console
#sd[a-z] 0:0 777 $ echo "remove udisk" > /dev/console
sd[a-z][0-9] 0:0 777 * if [ $ACTION = "add" ]; then echo "insert udisk" > /dev/console; else echo "remove udisk" > /dev/console; fi

3.修改mdev.conf

#sd[a-z][0-9] 0:0 777 @ echo "insert udisk" > /dev/console
#sd[a-z] 0:0 777 $ echo "remove udisk" > /dev/console

#sd[a-z][0-9] 0:0 777 * if [ $ACTION = "add" ]; then echo "insert udisk" > /dev/console; else echo "remove udisk" > /dev/console; fi
sd[a-z][0-9]+ 0:0 777 * if [ $ACTION = "add" ]; then mount /dev/$MDEV /mnt/udisk ; else umount /dev/$MDEV ; fi

4.再次修改mdev.conf

#sd[a-z][0-9] 0:0 777 @ echo "insert udisk" > /dev/console
#sd[a-z] 0:0 777 $ echo "remove udisk" > /dev/console
#sd[a-z][0-9] 0:0 777 * if [ $ACTION = "add" ]; then echo "insert udisk" > /dev/console; else echo "remove udisk" > /dev/console; fi
#sd[a-z][0-9]+ 0:0 777 * if [ $ACTION = "add" ]; then mount /dev/$MDEV /mnt/udisk ; else umount /dev/$MDEV ; fi

sd[a-z][0-9]+ 0:0 777 * /etc/add_remove_udisk.sh
添加脚本文件：/etc/add_remove_udisk.sh

#!/bin/sh

echo "add remove udisk" > /dev/console

if [ $ACTION = "add" ];
then
        echo "udisk insert " > /dev/console;
        mount /dev/$MDEV /mnt/udisk;
else
        echo "udisk remove " > /dev/console;
        #umount /dev/$MEDV;
        umount /mnt/udisk
fi

 

如果想要支持中文字符可以加上 utf8=true

 

 OK6410的U盘sdcard的热拔插处理

mdev.conf 

 

 hotplug

#!/bin/sh

case $MDEV in
sda1)
        DEVNAME=udisk
        MOUNTPOINT=/udisk
        ;;
mmcblk0p1)
        DEVNAME=sdcard
        MOUNTPOINT=/sdcard
        ;;
*)
        exit 0
        ;;
esac

case $ACTION in
remove)
        /bin/umount $MOUNTPOINT || true
        rmdir $MOUNTPOINT >/dev/null 2>&1 || true
        ;;
*)
        /bin/mkdir $MOUNTPOINT > /dev/null 2>&1 || true
        /bin/mount -o sync -o noatime -o nodiratime -t vfat /dev/$DEVNAME $MOUNTPOINT > /dev/null 2>&1 || true
        ;;
esac

exit 0

本文相应文档下载