Heap_4.c

/* Copyright 2018 Canaan Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
* FreeRTOS Kernel V10.0.1
* Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/

/*
* A sample implementation of pvPortMalloc() and vPortFree() that combines
* (coalescences) adjacent memory blocks as they are freed, and in so doing
* limits memory fragmentation.
*
* See heap_1.c, heap_2.c and heap_3.c for alternative implementations, and the
* memory management pages of http://www.FreeRTOS.org for more information.
*/
#include <stdlib.h>
// LoBo: needed for pvPortRealloc
#include <string.h>
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
all the API functions to use the MPU wrappers.  That should only be done when
task.h is included from an application file. */
#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE

#include "atomic.h"
#include "FreeRTOS.h"
#include "task.h"

#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE

#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
#error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
#endif

/* Block sizes must not get too small. */
#define heapMINIMUM_BLOCK_SIZE	( ( size_t ) ( xHeapStructSize << 1 ) )

/* Assumes 8bit bytes! */
#define heapBITS_PER_BYTE		( ( size_t ) 8 )

/* Allocate the memory for the heap. */
#if( configAPPLICATION_ALLOCATED_HEAP == 1 )
/* The application writer has already defined the array used for the RTOS
heap - probably so it can be placed in a special segment or address. */
// LoBo: use external variable for heapsize
extern size_t configTOTAL_HEAP_SIZE;
extern uint8_t ucHeap[];
#else
static uint8_t ucHeap[configTOTAL_HEAP_SIZE];
#endif /* configAPPLICATION_ALLOCATED_HEAP */

/* Define the linked list structure.  This is used to link free blocks in order
of their memory address. */
typedef struct A_BLOCK_LINK
{
	struct A_BLOCK_LINK *pxNextFreeBlock;	/*<< The next free block in the list. */
	size_t xBlockSize;						/*<< The size of the free block. */
} BlockLink_t;

/*-----------------------------------------------------------*/

/*
* Inserts a block of memory that is being freed into the correct position in
* the list of free memory blocks.  The block being freed will be merged with
* the block in front it and/or the block behind it if the memory blocks are
* adjacent to each other.
*/
static void prvInsertBlockIntoFreeList(BlockLink_t *pxBlockToInsert);

/*
* Called automatically to setup the required heap structures the first time
* pvPortMalloc() is called.
*/
static void prvHeapInit(void);

/*-----------------------------------------------------------*/

/* The size of the structure placed at the beginning of each allocated memory
block must by correctly byte aligned. */
static const size_t xHeapStructSize = (sizeof(BlockLink_t) + ((size_t)(portBYTE_ALIGNMENT - 1))) & ~((size_t)portBYTE_ALIGNMENT_MASK);

/* Create a couple of list links to mark the start and end of the list. */
static BlockLink_t xStart, *pxEnd = NULL;

/* Keeps track of the number of free bytes remaining, but says nothing about
fragmentation. */
static size_t xFreeBytesRemaining = 0U;
static size_t xMinimumEverFreeBytesRemaining = 0U;

/* Gets set to the top bit of an size_t type.  When this bit in the xBlockSize
member of an BlockLink_t structure is set then the block belongs to the
application.  When the bit is free the block is still part of the free heap
space. */
static size_t xBlockAllocatedBit = 0;

/*-----------------------------------------------------------*/

void *pvPortMalloc(size_t xWantedSize)
{
	BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
	void *pvReturn = NULL;

	taskENTER_CRITICAL();
	{
		/* If this is the first call to malloc then the heap will require
		initialisation to setup the list of free blocks. */
		if (pxEnd == NULL)
		{
			prvHeapInit();
		}
		else
		{
			mtCOVERAGE_TEST_MARKER();
		}

		/* Check the requested block size is not so large that the top bit is
		set.  The top bit of the block size member of the BlockLink_t structure
		is used to determine who owns the block - the application or the
		kernel, so it must be free. */
		if ((xWantedSize & xBlockAllocatedBit) == 0)
		{
			/* The wanted size is increased so it can contain a BlockLink_t
			structure in addition to the requested amount of bytes. */
			if (xWantedSize > 0)
			{
				xWantedSize += xHeapStructSize;

				/* Ensure that blocks are always aligned to the required number
				of bytes. */
				if ((xWantedSize & portBYTE_ALIGNMENT_MASK) != 0x00)
				{
					/* Byte alignment required. */
					xWantedSize += (portBYTE_ALIGNMENT - (xWantedSize & portBYTE_ALIGNMENT_MASK));
					configASSERT((xWantedSize & portBYTE_ALIGNMENT_MASK) == 0);
				}
				else
				{
					mtCOVERAGE_TEST_MARKER();
				}
			}
			else
			{
				mtCOVERAGE_TEST_MARKER();
			}

			if ((xWantedSize > 0) && (xWantedSize <= xFreeBytesRemaining))
			{
				/* Traverse the list from the start	(lowest address) block until
				one	of adequate size is found. */
				pxPreviousBlock = &xStart;
				pxBlock = xStart.pxNextFreeBlock;
				while ((pxBlock->xBlockSize < xWantedSize) && (pxBlock->pxNextFreeBlock != NULL))
				{
					pxPreviousBlock = pxBlock;
					pxBlock = pxBlock->pxNextFreeBlock;
				}

				/* If the end marker was reached then a block of adequate size
				was	not found. */
				if (pxBlock != pxEnd)
				{
					/* Return the memory space pointed to - jumping over the
					BlockLink_t structure at its start. */
					pvReturn = (void *)(((uint8_t *)pxPreviousBlock->pxNextFreeBlock) + xHeapStructSize);

					/* This block is being returned for use so must be taken out
					of the list of free blocks. */
					pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;

					/* If the block is larger than required it can be split into
					two. */
					if ((pxBlock->xBlockSize - xWantedSize) > heapMINIMUM_BLOCK_SIZE)
					{
						/* This block is to be split into two.  Create a new
						block following the number of bytes requested. The void
						cast is used to prevent byte alignment warnings from the
						compiler. */
						pxNewBlockLink = (void *)(((uint8_t *)pxBlock) + xWantedSize);
						configASSERT((((size_t)pxNewBlockLink) & portBYTE_ALIGNMENT_MASK) == 0);

						/* Calculate the sizes of two blocks split from the
						single block. */
						pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
						pxBlock->xBlockSize = xWantedSize;

						/* Insert the new block into the list of free blocks. */
						prvInsertBlockIntoFreeList(pxNewBlockLink);
					}
					else
					{
						mtCOVERAGE_TEST_MARKER();
					}

					xFreeBytesRemaining -= pxBlock->xBlockSize;

					if (xFreeBytesRemaining < xMinimumEverFreeBytesRemaining)
					{
						xMinimumEverFreeBytesRemaining = xFreeBytesRemaining;
					}
					else
					{
						mtCOVERAGE_TEST_MARKER();
					}

					/* The block is being returned - it is allocated and owned
					by the application and has no "next" block. */
					pxBlock->xBlockSize |= xBlockAllocatedBit;
					pxBlock->pxNextFreeBlock = NULL;
				}
				else
				{
					mtCOVERAGE_TEST_MARKER();
				}
			}
			else
			{
				mtCOVERAGE_TEST_MARKER();
			}
		}
		else
		{
			mtCOVERAGE_TEST_MARKER();
		}

		traceMALLOC(pvReturn, xWantedSize);
	}
	(void)taskEXIT_CRITICAL();

#if( configUSE_MALLOC_FAILED_HOOK == 1 )
	{
		if (pvReturn == NULL)
		{
			extern void vApplicationMallocFailedHook(void);
			vApplicationMallocFailedHook();
		}
		else
		{
			mtCOVERAGE_TEST_MARKER();
		}
	}
#endif

	configASSERT((((size_t)pvReturn) & (size_t)portBYTE_ALIGNMENT_MASK) == 0);
	return pvReturn;
}
/*-----------------------------------------------------------*/

void vPortFree(void *pv)
{
	uint8_t *puc = (uint8_t *)pv;
	BlockLink_t *pxLink;

	if (pv != NULL)
	{
		/* The memory being freed will have an BlockLink_t structure immediately
		before it. */
		puc -= xHeapStructSize;

		/* This casting is to keep the compiler from issuing warnings. */
		pxLink = (void *)puc;

		/* Check the block is actually allocated. */
		configASSERT((pxLink->xBlockSize & xBlockAllocatedBit) != 0);
		configASSERT(pxLink->pxNextFreeBlock == NULL);

		if ((pxLink->xBlockSize & xBlockAllocatedBit) != 0)
		{
			if (pxLink->pxNextFreeBlock == NULL)
			{
				/* The block is being returned to the heap - it is no longer
				allocated. */
				pxLink->xBlockSize &= ~xBlockAllocatedBit;

				taskENTER_CRITICAL();
				{
					/* Add this block to the list of free blocks. */
					xFreeBytesRemaining += pxLink->xBlockSize;
					traceFREE(pv, pxLink->xBlockSize);
					prvInsertBlockIntoFreeList(((BlockLink_t *)pxLink));
				}
				(void)taskEXIT_CRITICAL();
			}
			else
			{
				mtCOVERAGE_TEST_MARKER();
			}
		}
		else
		{
			mtCOVERAGE_TEST_MARKER();
		}
	}
}
/*-----------------------------------------------------------*/

// LoBo: Add pvPortRealloc & pvPortCalloc
void *pvPortRealloc( void *SrcAddr, size_t NewSize)
{
    size_t xWantedSize;
    BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
    BlockLink_t *pxBlockold, *pxBlockjudge, *pxIterator;
    void *pvReturn = NULL;
    size_t cnt;

    if(SrcAddr == NULL)
    {
        /* Direct malloc */
        pvReturn = pvPortMalloc(NewSize);
        return pvReturn;
    }

    if(NewSize <= 0)
    {
        vPortFree(SrcAddr);
        return NULL;
    }

    vTaskSuspendAll();
    {
        /* If this is the first call to malloc then the heap will require
           initialisation to setup the list of free blocks. */
        if( pxEnd == NULL )
        {
            prvHeapInit();
        }
        else
        {
            mtCOVERAGE_TEST_MARKER();
        }

        /* Check the requested block size is not so large that the top bit is
           set.  The top bit of the block size member of the BlockLink_t structure
           is used to determine who owns the block - the application or the
           kernel, so it must be free. */
        if( ( NewSize & xBlockAllocatedBit ) == 0 )
        {
            /* xWantedSize contains the size of the BlockLink_t structure */
            xWantedSize = NewSize + xHeapStructSize;

            /* Block end boundary alignment */
            if ((xWantedSize & portBYTE_ALIGNMENT_MASK) != 0x00)
            {
                /* Byte alignment required. */
                xWantedSize += (portBYTE_ALIGNMENT - (xWantedSize & portBYTE_ALIGNMENT_MASK));
                configASSERT((xWantedSize & portBYTE_ALIGNMENT_MASK) == 0);
            }
            else
            {
                mtCOVERAGE_TEST_MARKER();
            }

            /* Find the BlockLink_t structure corresponding to the source address and extract the xBlockSize information from it. */
            pxBlockold = (BlockLink_t *)(((uint8_t *)SrcAddr) - xHeapStructSize);
            if ((pxBlockold->xBlockSize & (~xBlockAllocatedBit)) >= xWantedSize)
            {
                /* The original memory is enough to cover the newly applied memory, do nothing, return directly */
                pvReturn = SrcAddr;
            }
            else
            {
                /* Determine whether the next block after the source address block can be combined */
                for (pxIterator = &xStart;
                     pxIterator->pxNextFreeBlock < pxBlockold;
                     pxIterator = pxIterator->pxNextFreeBlock)
                {
                    /* Do nothing, just to find empty memory blocks that are later than the original memory block. */
                }
                pxPreviousBlock = pxIterator;
                pxBlock = pxIterator->pxNextFreeBlock;

                /* Calculate the memory block behind the source address */
                pxBlockjudge = (BlockLink_t *)(((uint8_t *)pxBlockold) + (pxBlockold->xBlockSize & (~xBlockAllocatedBit)));

                if (pxBlock != pxBlockjudge ||
                    ((pxBlockold->xBlockSize & (~xBlockAllocatedBit)) + pxBlockjudge->xBlockSize) < xWantedSize)
                {
                    /* There is no free address block behind the source address block or free space is not enough */
                    pvReturn = pvPortMalloc(NewSize);
                    if (pvReturn)
                    {
                        cnt = (pxBlockold->xBlockSize & (~xBlockAllocatedBit)) - xHeapStructSize;
                        cnt = cnt > NewSize ? NewSize : cnt;
                        memcpy((uint8_t *)pvReturn, SrcAddr, cnt);
                        vPortFree(SrcAddr);
                    }
                }
                else
                {
                    /* Use the following address space directly */
                    pvReturn = SrcAddr;
                    /* cnt indicates how many Bytes are taken from the following memory block */
                    cnt = xWantedSize - (pxBlockold->xBlockSize & (~xBlockAllocatedBit));
                    if ((pxBlock->xBlockSize - cnt) > heapMINIMUM_BLOCK_SIZE)
                    {
                        /* Split memory block */
                        /* Create a new free memory block */
                        pxNewBlockLink = (BlockLink_t *)(((uint8_t *)pxBlockold) + xWantedSize);
                        pxNewBlockLink->pxNextFreeBlock = NULL;
                        pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - cnt;
                        /* The amount of memory remaining in the memory pool */
                        xFreeBytesRemaining -= cnt;
                        /* New memory block size after realloc */
                        pxBlockold->xBlockSize = xWantedSize | xBlockAllocatedBit;
                        /* Relink free memory table */
                        pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
                        prvInsertBlockIntoFreeList(pxNewBlockLink);
                    }
                    else
                    {
                        /* Directly merge the entire entire block to the original address block */
                        xFreeBytesRemaining -= pxBlock->xBlockSize;
                        pxBlockold->xBlockSize += pxBlock->xBlockSize;
                        pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
                    }

                    if(xMinimumEverFreeBytesRemaining > xFreeBytesRemaining)
                        xMinimumEverFreeBytesRemaining = xFreeBytesRemaining;
                }
            }
        }
        else
        {
            mtCOVERAGE_TEST_MARKER();
        }

    }
    ( void ) xTaskResumeAll();
    configASSERT( ( ( ( size_t ) pvReturn ) & ( size_t ) portBYTE_ALIGNMENT_MASK ) == 0 );
    return pvReturn;
}
/*-----------------------------------------------------------*/

void *pvPortCalloc(size_t n, size_t size)
{
    void *pvReturn;

    pvReturn = pvPortMalloc(n * size);
    if(pvReturn)
        memset(pvReturn, 0, n * size);

    return pvReturn;
}
/*-----------------------------------------------------------*/

size_t xPortGetFreeHeapSize(void)
{
	return xFreeBytesRemaining;
}
/*-----------------------------------------------------------*/

size_t xPortGetMinimumEverFreeHeapSize(void)
{
	return xMinimumEverFreeBytesRemaining;
}
/*-----------------------------------------------------------*/

void vPortInitialiseBlocks(void)
{
	/* This just exists to keep the linker quiet. */
}
/*-----------------------------------------------------------*/

static void prvHeapInit(void)
{
	BlockLink_t *pxFirstFreeBlock;
	uint8_t *pucAlignedHeap;
	size_t uxAddress;
	size_t xTotalHeapSize = configTOTAL_HEAP_SIZE;

	/* Ensure the heap starts on a correctly aligned boundary. */
	uxAddress = (size_t)ucHeap;

	if ((uxAddress & portBYTE_ALIGNMENT_MASK) != 0)
	{
		uxAddress += (portBYTE_ALIGNMENT - 1);
		uxAddress &= ~((size_t)portBYTE_ALIGNMENT_MASK);
		xTotalHeapSize -= uxAddress - (size_t)ucHeap;
	}

	pucAlignedHeap = (uint8_t *)uxAddress;

	/* xStart is used to hold a pointer to the first item in the list of free
	blocks.  The void cast is used to prevent compiler warnings. */
	xStart.pxNextFreeBlock = (void *)pucAlignedHeap;
	xStart.xBlockSize = (size_t)0;

	/* pxEnd is used to mark the end of the list of free blocks and is inserted
	at the end of the heap space. */
	uxAddress = ((size_t)pucAlignedHeap) + xTotalHeapSize;
	uxAddress -= xHeapStructSize;
	uxAddress &= ~((size_t)portBYTE_ALIGNMENT_MASK);
	pxEnd = (void *)uxAddress;
	pxEnd->xBlockSize = 0;
	pxEnd->pxNextFreeBlock = NULL;

	/* To start with there is a single free block that is sized to take up the
	entire heap space, minus the space taken by pxEnd. */
	pxFirstFreeBlock = (void *)pucAlignedHeap;
	pxFirstFreeBlock->xBlockSize = uxAddress - (size_t)pxFirstFreeBlock;
	pxFirstFreeBlock->pxNextFreeBlock = pxEnd;

	/* Only one block exists - and it covers the entire usable heap space. */
	xMinimumEverFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;
	xFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;

	/* Work out the position of the top bit in a size_t variable. */
	xBlockAllocatedBit = ((size_t)1) << ((sizeof(size_t) * heapBITS_PER_BYTE) - 1);
}
/*-----------------------------------------------------------*/

static void prvInsertBlockIntoFreeList(BlockLink_t *pxBlockToInsert)
{
	BlockLink_t *pxIterator;
	uint8_t *puc;

	/* Iterate through the list until a block is found that has a higher address
	than the block being inserted. */
	for (pxIterator = &xStart; pxIterator->pxNextFreeBlock < pxBlockToInsert; pxIterator = pxIterator->pxNextFreeBlock)
	{
		/* Nothing to do here, just iterate to the right position. */
	}

	/* Do the block being inserted, and the block it is being inserted after
	make a contiguous block of memory? */
	puc = (uint8_t *)pxIterator;
	if ((puc + pxIterator->xBlockSize) == (uint8_t *)pxBlockToInsert)
	{
		pxIterator->xBlockSize += pxBlockToInsert->xBlockSize;
		pxBlockToInsert = pxIterator;
	}
	else
	{
		mtCOVERAGE_TEST_MARKER();
	}

	/* Do the block being inserted, and the block it is being inserted before
	make a contiguous block of memory? */
	puc = (uint8_t *)pxBlockToInsert;
	if ((puc + pxBlockToInsert->xBlockSize) == (uint8_t *)pxIterator->pxNextFreeBlock)
	{
		if (pxIterator->pxNextFreeBlock != pxEnd)
		{
			/* Form one big block from the two blocks. */
			pxBlockToInsert->xBlockSize += pxIterator->pxNextFreeBlock->xBlockSize;
			pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock->pxNextFreeBlock;
		}
		else
		{
			pxBlockToInsert->pxNextFreeBlock = pxEnd;
		}
	}
	else
	{
		pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock;
	}

	/* If the block being inserted plugged a gab, so was merged with the block
	before and the block after, then it's pxNextFreeBlock pointer will have
	already been set, and should not be set here as that would make it point
	to itself. */
	if (pxIterator != pxBlockToInsert)
	{
		pxIterator->pxNextFreeBlock = pxBlockToInsert;
	}
	else
	{
		mtCOVERAGE_TEST_MARKER();
	}
}

 

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值