将滑移网格（mesh motion）从瞬态改为稳态，出现了下面的变化，求解方法、mesh motion改为了frame motion。其实就是变成了MRF计算了。

参考文献：MRF｜滑移网格｜重叠网格-析模界 (topcfd.cn)

将滑移网格（mesh motion）从瞬态改为稳态，出现了下面的变化，求解方法、mesh motion改为了frame motion。其实就是变成了MRF计算了。

Adjusting the following settings:
P-V coupling method:                             from: SIMPLEC   to: Coupled
CFL number for the coupled flow equation system: from: 1e+10   to:   200
Under-Relaxation Factor for density              from:     1   to:   0.5
Skewness Correction for SIMPLEC                  from:     1   to:     0
Under-Relaxation Factor for pressure:            from:   0.8   to:   0.3
Pseudo transient formulation:                    from: disabled   to: enabled
Pseudo transient formulation:                    from: disabled   to: enabled
HOTR:                                            from: disabled   to: enabled
P-V coupling method:                             from: SIMPLEC   to: Coupled
Under-Relaxation Factor for density              from:     1   to:   0.5

This is a steady state case. Using Frame Motion instead of Mesh Motion for cell zone inner (ID 6)!

下面为我计算的结果。和CFD之道的比较接近。