apm32 串口重映射打印消息

最新推荐文章于 2024-10-31 09:56:23 发布

料子懒

最新推荐文章于 2024-10-31 09:56:23 发布

阅读量107

点赞数 3

分类专栏： APM32 文章标签：学习方法 c语言 stm32

本文链接：https://blog.csdn.net/qq_17018135/article/details/142341637

版权

APM32 专栏收录该内容

1 篇文章 0 订阅

订阅专栏

int main(void)
{
    uint8_t i;

    GPIO_Config_T GPIO_ConfigStruct;
    USART_Config_T USART_ConfigStruct;

    RCM_EnableAPB2PeriphClock((RCM_APB2_PERIPH_T)(RCM_APB2_PERIPH_AFIO|RCM_APB2_PERIPH_GPIOB | RCM_APB2_PERIPH_USART1));
   
	GPIO_ConfigPinRemap(GPIO_REMAP_USART1);
	GPIO_ConfigStruct.mode = GPIO_MODE_AF_PP;
    GPIO_ConfigStruct.pin = GPIO_PIN_6;
    GPIO_ConfigStruct.speed = GPIO_SPEED_50MHz;
    GPIO_Config(GPIOB, &GPIO_ConfigStruct);

    GPIO_ConfigStruct.mode = GPIO_MODE_IN_FLOATING;
    GPIO_ConfigStruct.pin = GPIO_PIN_7;
    GPIO_Config(GPIOB, &GPIO_ConfigStruct);
	
		USART_ConfigStruct.baudRate = 9600;
    USART_ConfigStruct.hardwareFlow = USART_HARDWARE_FLOW_NONE;
    USART_ConfigStruct.mode = USART_MODE_TX_RX;
    USART_ConfigStruct.parity = USART_PARITY_NONE;
    USART_ConfigStruct.stopBits = USART_STOP_BIT_1;
    USART_ConfigStruct.wordLength = USART_WORD_LEN_8B;
    USART_Config(USART1, &USART_ConfigStruct);

		USART_Enable(USART1);

		SysTick_Config(SystemCoreClock / 1000);

    while(1)
    {
        Delay();

        for(i = 0; i < sizeof(txBuf); i++)
        {
            while(USART_ReadStatusFlag(USART1, USART_FLAG_TXBE) == RESET);
            USART_TxData(USART1, txBuf[i]);
        }
				
    }
}