yoloV4 配置+训练自己的图片

最新推荐文章于 2024-07-06 19:34:24 发布

Clark Kent 2000

最新推荐文章于 2024-07-06 19:34:24 发布

阅读量1.7k

点赞数

文章标签：深度学习

本文链接：https://blog.csdn.net/qq_20241587/article/details/113342117

版权

本文档介绍了如何配置和训练YOLOv4模型来处理自定义图像数据。首先，通过git克隆darknet仓库，然后修改makefile并编译。接着，利用labelimg工具对数据进行标注，并创建相应的配置文件yolo-obj.cfg。调整类别数和过滤器数量以匹配数据集。下载预训练权重，并设置正确的文件结构。最后，使用darknet的detector命令进行模型训练和验证，通过训练和测试数据集评估模型性能。

摘要由CSDN通过智能技术生成

这部分上V4和V3十分相似

git clone https://github.com/AlexeyAB/darknet.git
cd darknet
修改makefile一些配置，then make

修改后的makefile如下

GPU=1
CUDNN=1
CUDNN_HALF=0
OPENCV=1
AVX=0
OPENMP=0
LIBSO=1
ZED_CAMERA=0
ZED_CAMERA_v2_8=0

# set GPU=1 and CUDNN=1 to speedup on GPU
# set CUDNN_HALF=1 to further speedup 3 x times (Mixed-precision on Tensor Cores) GPU: Volta, Xavier, Turing and higher
# set AVX=1 and OPENMP=1 to speedup on CPU (if error occurs then set AVX=0)
# set ZED_CAMERA=1 to enable ZED SDK 3.0 and above
# set ZED_CAMERA_v2_8=1 to enable ZED SDK 2.X

USE_CPP=0
DEBUG=0

ARCH= -gencode arch=compute_35,code=sm_35 \
      -gencode arch=compute_50,code=[sm_50,compute_50] \
      -gencode arch=compute_52,code=[sm_52,compute_52] \
	    -gencode arch=compute_61,code=[sm_61,compute_61]

OS := $(shell uname)

# GeForce RTX 3070, 3080, 3090
# ARCH= -gencode arch=compute_86,code=[sm_86,compute_86]

# Kepler GeForce GTX 770, GTX 760, GT 740
# ARCH= -gencode arch=compute_30,code=sm_30

# Tesla A100 (GA100), DGX-A100, RTX 3080
# ARCH= -gencode arch=compute_80,code=[sm_80,compute_80]

# Tesla V100
# ARCH= -gencode arch=compute_70,code=[sm_70,compute_70]

# GeForce RTX 2080 Ti, RTX 2080, RTX 2070, Quadro RTX 8000, Quadro RTX 6000, Quadro RTX 5000, Tesla T4, XNOR Tensor Cores
# ARCH= -gencode arch=compute_75,code=[sm_75,compute_75]

# Jetson XAVIER
# ARCH= -gencode arch=compute_72,code=[sm_72,compute_72]

# GTX 1080, GTX 1070, GTX 1060, GTX 1050, GTX 1030, Titan Xp, Tesla P40, Tesla P4
# ARCH= -gencode arch=compute_61,code=sm_61 -gencode arch=compute_61,code=compute_61

# GP100/Tesla P100 - DGX-1
# ARCH= -gencode arch=compute_60,code=sm_60

# For Jetson TX1, Tegra X1, DRIVE CX, DRIVE PX - uncomment:
# ARCH= -gencode arch=compute_53,code=[sm_53,compute_53]

# For Jetson Tx2 or Drive-PX2 uncomment:
# ARCH= -gencode arch=compute_62,code=[sm_62,compute_62]

# For Tesla GA10x cards, RTX 3090, RTX 3080, RTX 3070, RTX A6000, RTX A40 uncomment:
# ARCH= -gencode arch=compute_86,code=[sm_86,compute_86]


VPATH=./src/
EXEC=darknet
OBJDIR=./obj/

ifeq ($(LIBSO), 1)
LIBNAMESO=libdarknet.so
APPNAMESO=uselib
endif

ifeq ($(USE_CPP), 1)
CC=g++
else
CC=gcc
endif

CPP=g++ -std=c++11
NVCC=nvcc
OPTS=-Ofast
LDFLAGS= -lm -pthread
COMMON= -Iinclude/ -I3rdparty/stb/include
CFLAGS=-Wall -Wfatal-errors -Wno-unused-result -Wno-unknown-pragmas -fPIC

ifeq ($(DEBUG), 1)
#OPTS= -O0 -g
#OPTS= -Og -g
COMMON+= -DDEBUG
CFLAGS+= -DDEBUG
else
ifeq ($(AVX), 1)
CFLAGS+= -ffp-contract=fast -mavx -mavx2 -msse3 -msse4.1 -msse4.2 -msse4a
endif
endif

CFLAGS+=$(OPTS)

ifneq (,$(findstring MSYS_NT,$(OS)))
LDFLAGS+=-lws2_32
endif

ifeq ($(OPENCV), 1)
COMMON+= -DOPENCV
CFLAGS+= -DOPENCV
LDFLAGS+= `pkg-config --libs opencv4 2> /dev/null || pkg-config --libs opencv`
COMMON+= `pkg-config --cflags opencv4 2> /dev/null || pkg-config --cflags opencv`
endif

ifeq ($(OPENMP), 1)
    ifeq ($(OS),Darwin) #MAC
	    CFLAGS+= -Xpreprocessor -fopenmp
	else
		CFLAGS+= -fopenmp
	endif
LDFLAGS+= -lgomp
endif

ifeq ($(GPU), 1)
COMMON+= -DGPU -I/usr/local/cuda-10.0/include/
CFLAGS+= -DGPU
ifeq ($(OS),Darwin) #MAC
LDFLAGS+= -L/usr/local/cuda-10.0/lib64 -lcuda -lcudart -lcublas -lcurand
else
LDFLAGS+= -L/usr/local/cuda-10.0/lib64 -lcuda -lcudart -lcublas -lcurand
endif
endif

ifeq ($(CUDNN), 1)
COMMON+= -DCUDNN
ifeq ($(OS),Darwin) #MAC
CFLAGS+= -DCUDNN -I/usr/local/cuda-10.0/include
LDFLAGS+= -L/usr/local/cuda-10.0/lib -lcudnn
else
CFLAGS+= -DCUDNN -I/usr/local/cudnn/include
LDFLAGS+= -L/usr/local/cudnn/lib64 -lcudnn
endif
endif

ifeq ($(CUDNN_HALF), 1)
COMMON+= -DCUDNN_HALF
CFLAGS+= -DCUDNN_HALF
ARCH+= -gencode arch=compute_70,code=[sm_70,compute_70]
endif

ifeq ($(ZED_CAMERA), 1)
CFLAGS+= -DZED_STEREO -I/usr/local/zed/include
ifeq ($(ZED_CAMERA_v2_8), 1)
LDFLAGS+= -L/usr/local/zed/lib -lsl_core -lsl_input -lsl_zed
#-lstdc++ -D_GLIBCXX_USE_CXX11_ABI=0
else
LDFLAGS+= -L/usr/local/zed/lib -lsl_zed
#-lstdc++ -D_GLIBCXX_USE_CXX11_ABI=0
endif
endif

OBJ=image_opencv.o http_stream.o gemm.o utils.o dark_cuda.o convo