mimicom无法输入问题

在使用minicom查看log时候，今天发现无法回车进入到命令行模式输入命令了，通过查找资料发现关键点就在串口的配置中有个Serial port setup–>Hardware Flow Contorl选项被改成了Yes，这样就造成了键盘没有用了，接受不了任何输入。把他改成No就好了。具体修改操作如下：
sudo minicom -s
±----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup |
| Modem and dialing |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as… |
| Exit |
| Exit from Minicom |
±-------------------------+
进入Serial port setup界面

±----------------------------------------------------------------------+
| A - Serial Device : /dev/ttyS1 |
| B - Lockfile Location : /var/lock |
| C - Callin Program : |
| D - Callout Program : |
| E - Bps/Par/Bits : 115200 8N1 |
| F - Hardware Flow Control : No |
| G - Software Flow Control : No |
| |
| Change which setting? |
±----------------------------------------------------------------------+
此时F - Hardware Flow Contorl项为Yes，按下F键就修改为No了，即关闭硬件流控，回车回到上级菜单

±----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup |
| Modem and dialing |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as… |
| Exit |
| Exit from Minicom |
±-------------------------+

选择| Save setup as dfl |，然后选择 Exit from Minicom 重启minicom

这样就可以输入命令了。

minicom显示颜色
通过串口登录下位机，执行ls命令，minicom默认不会显示颜色，只会加粗显示，对于根文件系统中的各种文件类型的区分不是很直观，那么怎么样才能让minicom显示不同类型文件的不同颜色呢？只需要在minicom后面加上“-c on”选项即可

$ sudo minicom -c on