LCD-液晶显示中英文-9.液晶显示变量程序(整数_浮点数_居中显示等)

目录

液晶显示变量程序(整数_浮点数_居中显示等)

前言

程序

bsp_ili9341_lcd.h

bsp_ili9341_lcd.c

fonts.h

fonts.c

main.c

实验现象


液晶显示变量程序(整数_浮点数_居中显示等)

前言

C语言输出printf里面%*d是什么意思?

printf中的%*d的意思是输出*个宽度的%d(整形)。

例子:

a=5;

b=6;

printf("%*d",a,b);

其中,a代表*,即%5d,格式化输出5个宽度的整形b。

最后输出的结果为 6.即[4个空格][6].

在程序中,我们使用sprintf进行文字的居中显示正是运用了这个原理。

程序

bsp_ili9341_lcd.h

#ifndef      __BSP_ILI9341_LCD_H
#define         __BSP_ILI9341_LCD_H


#include "stm32f10x.h"
#include "./font/fonts.h"


/***************************************************************************************
2^26 =0X0400 0000 = 64MB,每个 BANK 有4*64MB = 256MB
64MB:FSMC_Bank1_NORSRAM1:0X6000 0000 ~ 0X63FF FFFF
64MB:FSMC_Bank1_NORSRAM2:0X6400 0000 ~ 0X67FF FFFF
64MB:FSMC_Bank1_NORSRAM3:0X6800 0000 ~ 0X6BFF FFFF
64MB:FSMC_Bank1_NORSRAM4:0X6C00 0000 ~ 0X6FFF FFFF

选择BANK1-BORSRAM1 连接 TFT,地址范围为0X6000 0000 ~ 0X63FF FFFF
FSMC_A16 接LCD的DC(寄存器/数据选择)脚
寄存器基地址 = 0X60000000
RAM基地址 = 0X60020000 = 0X60000000+2^16*2 = 0X60000000 + 0X20000 = 0X60020000
当选择不同的地址线时,地址要重新计算  
****************************************************************************************/

/******************************* ILI9341 显示屏的 FSMC 参数定义 ***************************/
//FSMC_Bank1_NORSRAM用于LCD命令操作的地址
#define      FSMC_Addr_ILI9341_CMD         ( ( uint32_t ) 0x60000000 )

//FSMC_Bank1_NORSRAM用于LCD数据操作的地址      
#define      FSMC_Addr_ILI9341_DATA        ( ( uint32_t ) 0x60020000 )

//由片选引脚决定的NOR/SRAM块
#define      FSMC_Bank1_NORSRAMx           FSMC_Bank1_NORSRAM1



/******************************* ILI9341 显示屏8080通讯引脚定义 ***************************/
/******控制信号线******/
//片选,选择NOR/SRAM块
#define      ILI9341_CS_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_CS_PORT               GPIOD
#define      ILI9341_CS_PIN                GPIO_Pin_7

//DC引脚,使用FSMC的地址信号控制,本引脚决定了访问LCD时使用的地址
//PD11为FSMC_A16
#define      ILI9341_DC_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_DC_PORT               GPIOD
#define      ILI9341_DC_PIN                GPIO_Pin_11

//写使能
#define      ILI9341_WR_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_WR_PORT               GPIOD
#define      ILI9341_WR_PIN                GPIO_Pin_5

//读使能
#define      ILI9341_RD_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_RD_PORT               GPIOD
#define      ILI9341_RD_PIN                GPIO_Pin_4

//复位引脚
#define      ILI9341_RST_CLK               RCC_APB2Periph_GPIOE
#define      ILI9341_RST_PORT              GPIOE
#define      ILI9341_RST_PIN               GPIO_Pin_1

//背光引脚
#define      ILI9341_BK_CLK                RCC_APB2Periph_GPIOD    
#define      ILI9341_BK_PORT               GPIOD
#define      ILI9341_BK_PIN                GPIO_Pin_12

/********数据信号线***************/
#define      ILI9341_D0_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_D0_PORT               GPIOD
#define      ILI9341_D0_PIN                GPIO_Pin_14

#define      ILI9341_D1_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_D1_PORT               GPIOD
#define      ILI9341_D1_PIN                GPIO_Pin_15

#define      ILI9341_D2_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_D2_PORT               GPIOD
#define      ILI9341_D2_PIN                GPIO_Pin_0

#define      ILI9341_D3_CLK                RCC_APB2Periph_GPIOD  
#define      ILI9341_D3_PORT               GPIOD
#define      ILI9341_D3_PIN                GPIO_Pin_1

#define      ILI9341_D4_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D4_PORT               GPIOE
#define      ILI9341_D4_PIN                GPIO_Pin_7

#define      ILI9341_D5_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D5_PORT               GPIOE
#define      ILI9341_D5_PIN                GPIO_Pin_8

#define      ILI9341_D6_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D6_PORT               GPIOE
#define      ILI9341_D6_PIN                GPIO_Pin_9

#define      ILI9341_D7_CLK                RCC_APB2Periph_GPIOE  
#define      ILI9341_D7_PORT               GPIOE
#define      ILI9341_D7_PIN                GPIO_Pin_10

#define      ILI9341_D8_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D8_PORT               GPIOE
#define      ILI9341_D8_PIN                GPIO_Pin_11

#define      ILI9341_D9_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D9_PORT               GPIOE
#define      ILI9341_D9_PIN                GPIO_Pin_12

#define      ILI9341_D10_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D10_PORT               GPIOE
#define      ILI9341_D10_PIN                GPIO_Pin_13

#define      ILI9341_D11_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D11_PORT               GPIOE
#define      ILI9341_D11_PIN                GPIO_Pin_14

#define      ILI9341_D12_CLK                RCC_APB2Periph_GPIOE   
#define      ILI9341_D12_PORT               GPIOE
#define      ILI9341_D12_PIN                GPIO_Pin_15

#define      ILI9341_D13_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_D13_PORT               GPIOD
#define      ILI9341_D13_PIN                GPIO_Pin_8

#define      ILI9341_D14_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_D14_PORT               GPIOD
#define      ILI9341_D14_PIN                GPIO_Pin_9

#define      ILI9341_D15_CLK                RCC_APB2Periph_GPIOD   
#define      ILI9341_D15_PORT               GPIOD
#define      ILI9341_D15_PIN                GPIO_Pin_10

/*************************************** 调试预用 ******************************************/
#define      DEBUG_DELAY()                

/***************************** ILI934 显示区域的起始坐标和总行列数 ***************************/
#define      ILI9341_DispWindow_X_Star            0     //起始点的X坐标
#define      ILI9341_DispWindow_Y_Star            0     //起始点的Y坐标

#define             ILI9341_LESS_PIXEL                                  240            //液晶屏较短方向的像素宽度
#define             ILI9341_MORE_PIXEL                                     320            //液晶屏较长方向的像素宽度

//根据液晶扫描方向而变化的XY像素宽度
//调用ILI9341_GramScan函数设置方向时会自动更改
extern uint16_t LCD_X_LENGTH,LCD_Y_LENGTH; 

//液晶屏扫描模式
//参数可选值为0-7
extern uint8_t LCD_SCAN_MODE;

/******************************* 定义 ILI934 显示屏常用颜色 ********************************/
#define      BACKGROUND                        BLACK   //默认背景颜色

#define      WHITE                                   0xFFFF       //白色
#define      BLACK                         0x0000       //黑色 
#define      GREY                          0xF7DE       //灰色 
#define      BLUE                          0x001F       //蓝色 
#define      BLUE2                         0x051F       //浅蓝色 
#define      RED                           0xF800       //红色 
#define      MAGENTA                       0xF81F       //红紫色,洋红色 
#define      GREEN                         0x07E0       //绿色 
#define      CYAN                          0x7FFF       //蓝绿色,青色 
#define      YELLOW                        0xFFE0       //黄色 
#define      BRED                          0xF81F
#define      GRED                          0xFFE0
#define      GBLUE                         0x07FF



/******************************* 定义 ILI934 常用命令 ********************************/
#define      CMD_SetCoordinateX                     0x2A         //设置X坐标
#define      CMD_SetCoordinateY                     0x2B         //设置Y坐标
#define      CMD_SetPixel                         0x2C         //填充像素


/* 定义 LCD 驱动芯片 ID */
#define     LCDID_UNKNOWN             0
#define     LCDID_ILI9341             0x9341
#define     LCDID_ST7789V             0x8552


/********************************** 声明 ILI934 函数 ***************************************/
void                     ILI9341_Init                    ( void );
uint16_t                 ILI9341_ReadID                 ( void );
void                     ILI9341_Rst                     ( void );
void                     ILI9341_BackLed_Control         ( FunctionalState enumState );
void                     ILI9341_GramScan                ( uint8_t ucOtion );
void                     ILI9341_OpenWindow              ( uint16_t usX, uint16_t usY, uint16_t usWidth, uint16_t usHeight );
void                     ILI9341_Clear                   ( uint16_t usX, uint16_t usY, uint16_t usWidth, uint16_t usHeight );
void                     ILI9341_SetPointPixel           ( uint16_t usX, uint16_t usY );
uint16_t                 ILI9341_GetPointPixel           ( uint16_t usX , uint16_t usY );
void                     ILI9341_DrawLine                ( uint16_t usX1, uint16_t usY1, uint16_t usX2, uint16_t usY2 );
void                     ILI9341_DrawRectangle           ( uint16_t usX_Start, uint16_t usY_Start, uint16_t usWidth, uint16_t usHeight,uint8_t ucFilled );
void                     ILI9341_DrawCircle              ( uint16_t usX_Center, uint16_t usY_Center, uint16_t usRadius, uint8_t ucFilled );
void                     ILI9341_DispChar_EN             ( uint16_t usX, uint16_t usY, const char cChar );
void                     ILI9341_DispStringLine_EN      ( uint16_t line, char * pStr );
void                     ILI9341_DispString_EN                  ( uint16_t usX, uint16_t usY, char * pStr );
void                     ILI9341_DispChar_CH             ( uint16_t usX, uint16_t usY, uint16_t usChar );
void                     ILI9341_DispString_CH           ( uint16_t usX, uint16_t usY,  char * pStr );
void                     ILI9341_DispString_EN_CH        (    uint16_t usX, uint16_t usY,  char * pStr );
void                                             ILI9341_DispStringLine_EN_CH     (  uint16_t line, char * pStr );
void                                             ILI9341_DispString_EN_YDir         (   uint16_t usX,uint16_t usY ,  char * pStr );
void                                             ILI9341_DispString_EN_CH_YDir     (   uint16_t usX,uint16_t usY , char * pStr );

void                                             LCD_SetFont                                            (sFONT *fonts);
sFONT                                         *LCD_GetFont                                            (void);
void                                             LCD_ClearLine                                        (uint16_t Line);
void                                             LCD_SetBackColor                                (uint16_t Color);
void                                             LCD_SetTextColor                                (uint16_t Color)    ;
void                                             LCD_SetColors                                        (uint16_t TextColor, uint16_t BackColor);
void                                             LCD_GetColors                                        (uint16_t *TextColor, uint16_t *BackColor);

void ILI9341_DisplayStringEx(uint16_t x,         //字符显示位置x
                                                                 uint16_t y,                 //字符显示位置y
                                                                 uint16_t Font_width,    //要显示的字体宽度,英文字符在此基础上/2。注意为偶数
                                                                 uint16_t Font_Height,    //要显示的字体高度,注意为偶数
                                                                 uint8_t *ptr,                    //显示的字符内容
                                                                 uint16_t DrawModel);  //是否反色显示

void ILI9341_DisplayStringEx_YDir(uint16_t x,         //字符显示位置x
                                                                             uint16_t y,                 //字符显示位置y
                                                                             uint16_t Font_width,    //要显示的字体宽度,英文字符在此基础上/2。注意为偶数
                                                                             uint16_t Font_Height,    //要显示的字体高度,注意为偶数
                                                                             uint8_t *ptr,                    //显示的字符内容
                                                                             uint16_t DrawModel);  //是否反色显示

#endif /* __BSP_ILI9341_ILI9341_H */


bsp_ili9341_lcd.c

#include "./lcd/bsp_ili9341_lcd.h"
#include "./font/fonts.h"    

//根据液晶扫描方向而变化的XY像素宽度
//调用ILI9341_GramScan函数设置方向时会自动更改
uint16_t LCD_X_LENGTH = ILI9341_LESS_PIXEL;
uint16_t LCD_Y_LENGTH = ILI9341_MORE_PIXEL;

//液晶屏扫描模式,本变量主要用于方便选择触摸屏的计算参数
//参数可选值为0-7
//调用ILI9341_GramScan函数设置方向时会自动更改
//LCD刚初始化完成时会使用本默认值
uint8_t LCD_SCAN_MODE = 6;

//保存液晶屏驱动ic的 ID
uint16_t lcdid = LCDID_UNKNOWN;

static sFONT *LCD_Currentfonts = &Font8x16;  //英文字体
static uint16_t CurrentTextColor   = BLACK;//前景色
static uint16_t CurrentBackColor   = WHITE;//背景色

__inline void                 ILI9341_Write_Cmd           ( uint16_t usCmd );
__inline void                 ILI9341_Write_Data          ( uint16_t usData );
__inline uint16_t             ILI9341_Read_Data           ( void );
static void                   ILI9341_Delay               ( __IO uint32_t nCount );
static void                   ILI9341_GPIO_Config         ( void );
static void                   ILI9341_FSMC_Config         ( void );
static void                   ILI9341_REG_Config          ( void );
static void                   ILI9341_SetCursor           ( uint16_t usX, uint16_t usY );
static __inline void          ILI9341_FillColor           ( uint32_t ulAmout_Point, uint16_t usColor );
static uint16_t               ILI9341_Read_PixelData      ( void );




/**
  * @brief  向ILI9341写入命令
  * @param  usCmd :要写入的命令(表寄存器地址)
  * @retval 无
  */    
__inline void ILI9341_Write_Cmd ( uint16_t usCmd )
{
    * ( __IO uint16_t * ) ( FSMC_Addr_ILI9341_CMD ) = usCmd;
    
}


/**
  * @brief  向ILI9341写入数据
  * @param  usData :要写入的数据
  * @retval 无
  */    
__inline void ILI9341_Write_Data ( uint16_t usData )
{
    * ( __IO uint16_t * ) ( FSMC_Addr_ILI9341_DATA ) = usData;
    
}


/**
  * @brief  从ILI9341读取数据
  * @param  无
  * @retval 读取到的数据
  */    
__inline uint16_t ILI9341_Read_Data ( void )
{
    return ( * ( __IO uint16_t * ) ( FSMC_Addr_ILI9341_DATA ) );
    
}


/**
  * @brief  用于 ILI9341 简单延时函数
  * @param  nCount :延时计数值
  * @retval 无
  */    
static void ILI9341_Delay ( __IO uint32_t nCount )
{
  for ( ; nCount != 0; nCount -- );
    
}


/**
  * @brief  初始化ILI9341的IO引脚
  * @param  无
  * @retval 无
  */
static void ILI9341_GPIO_Config ( void )
{
    GPIO_InitTypeDef GPIO_InitStructure;

    /* 使能FSMC对应相应管脚时钟*/
    RCC_APB2PeriphClockCmd (     
                                                    /*控制信号*/
                                                    ILI9341_CS_CLK|ILI9341_DC_CLK|ILI9341_WR_CLK|
                                                    ILI9341_RD_CLK    |ILI9341_BK_CLK|ILI9341_RST_CLK|
                                                    /*数据信号*/
                                                    ILI9341_D0_CLK|ILI9341_D1_CLK|    ILI9341_D2_CLK | 
                                                    ILI9341_D3_CLK | ILI9341_D4_CLK|ILI9341_D5_CLK|
                                                    ILI9341_D6_CLK | ILI9341_D7_CLK|ILI9341_D8_CLK|
                                                    ILI9341_D9_CLK | ILI9341_D10_CLK|ILI9341_D11_CLK|
                                                    ILI9341_D12_CLK | ILI9341_D13_CLK|ILI9341_D14_CLK|
                                                    ILI9341_D15_CLK    , ENABLE );
        
    
    /* 配置FSMC相对应的数据线,FSMC-D0~D15 */    
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode =  GPIO_Mode_AF_PP;
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D0_PIN;
    GPIO_Init ( ILI9341_D0_PORT, & GPIO_InitStructure );

    GPIO_InitStructure.GPIO_Pin = ILI9341_D1_PIN;
    GPIO_Init ( ILI9341_D1_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D2_PIN;
    GPIO_Init ( ILI9341_D2_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D3_PIN;
    GPIO_Init ( ILI9341_D3_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D4_PIN;
    GPIO_Init ( ILI9341_D4_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D5_PIN;
    GPIO_Init ( ILI9341_D5_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D6_PIN;
    GPIO_Init ( ILI9341_D6_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D7_PIN;
    GPIO_Init ( ILI9341_D7_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D8_PIN;
    GPIO_Init ( ILI9341_D8_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D9_PIN;
    GPIO_Init ( ILI9341_D9_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D10_PIN;
    GPIO_Init ( ILI9341_D10_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D11_PIN;
    GPIO_Init ( ILI9341_D11_PORT, & GPIO_InitStructure );

    GPIO_InitStructure.GPIO_Pin = ILI9341_D12_PIN;
    GPIO_Init ( ILI9341_D12_PORT, & GPIO_InitStructure );    
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D13_PIN;
    GPIO_Init ( ILI9341_D13_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D14_PIN;
    GPIO_Init ( ILI9341_D14_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_D15_PIN;
    GPIO_Init ( ILI9341_D15_PORT, & GPIO_InitStructure );
    

    
    /* 配置FSMC相对应的控制线
     * FSMC_NOE   :LCD-RD
     * FSMC_NWE   :LCD-WR
     * FSMC_NE1   :LCD-CS
     * FSMC_A16      :LCD-DC
     */
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode =  GPIO_Mode_AF_PP;
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_RD_PIN; 
    GPIO_Init (ILI9341_RD_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_WR_PIN; 
    GPIO_Init (ILI9341_WR_PORT, & GPIO_InitStructure );
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_CS_PIN; 
    GPIO_Init ( ILI9341_CS_PORT, & GPIO_InitStructure );  
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_DC_PIN; 
    GPIO_Init ( ILI9341_DC_PORT, & GPIO_InitStructure );
    

  /* 配置LCD复位RST控制管脚*/
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_RST_PIN; 
    GPIO_Init ( ILI9341_RST_PORT, & GPIO_InitStructure );
    
    
    /* 配置LCD背光控制管脚BK*/
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;  
    
    GPIO_InitStructure.GPIO_Pin = ILI9341_BK_PIN; 
    GPIO_Init ( ILI9341_BK_PORT, & GPIO_InitStructure );
}


 /**
  * @brief  LCD  FSMC 模式配置
  * @param  无
  * @retval 无
  */
static void ILI9341_FSMC_Config ( void )
{
    FSMC_NORSRAMInitTypeDef  FSMC_NORSRAMInitStructure={0};
    FSMC_NORSRAMTimingInitTypeDef  readWriteTiming={0};     
    
    /* 使能FSMC时钟*/
    RCC_AHBPeriphClockCmd ( RCC_AHBPeriph_FSMC, ENABLE );

    //地址建立时间(ADDSET)为1个HCLK 2/72M=28ns
    readWriteTiming.FSMC_AddressSetupTime      = 0x01;     //地址建立时间
    //数据保持时间(DATAST)+ 1个HCLK = 5/72M=70ns    
    readWriteTiming.FSMC_DataSetupTime         = 0x04;     //数据建立时间
    //选择控制的模式
    //模式B,异步NOR FLASH模式,与ILI9341的8080时序匹配
    readWriteTiming.FSMC_AccessMode            = FSMC_AccessMode_B;    
    
    /*以下配置与模式B无关*/
    //地址保持时间(ADDHLD)模式A未用到
    readWriteTiming.FSMC_AddressHoldTime       = 0x00;     //地址保持时间
    //设置总线转换周期,仅用于复用模式的NOR操作
    readWriteTiming.FSMC_BusTurnAroundDuration = 0x00;
    //设置时钟分频,仅用于同步类型的存储器
    readWriteTiming.FSMC_CLKDivision           = 0x00;
    //数据保持时间,仅用于同步型的NOR    
    readWriteTiming.FSMC_DataLatency           = 0x00;    

    
    FSMC_NORSRAMInitStructure.FSMC_Bank                  = FSMC_Bank1_NORSRAMx;
    FSMC_NORSRAMInitStructure.FSMC_DataAddressMux        = FSMC_DataAddressMux_Disable;
    FSMC_NORSRAMInitStructure.FSMC_MemoryType            = FSMC_MemoryType_NOR;
    FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth       = FSMC_MemoryDataWidth_16b;
    FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode       = FSMC_BurstAccessMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity    = FSMC_WaitSignalPolarity_Low;
    FSMC_NORSRAMInitStructure.FSMC_WrapMode              = FSMC_WrapMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive      = FSMC_WaitSignalActive_BeforeWaitState;
    FSMC_NORSRAMInitStructure.FSMC_WriteOperation        = FSMC_WriteOperation_Enable;
    FSMC_NORSRAMInitStructure.FSMC_WaitSignal            = FSMC_WaitSignal_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ExtendedMode          = FSMC_ExtendedMode_Disable;
    FSMC_NORSRAMInitStructure.FSMC_WriteBurst            = FSMC_WriteBurst_Disable;
    FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &readWriteTiming;
    FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct     = &readWriteTiming;  
    
    FSMC_NORSRAMInit ( & FSMC_NORSRAMInitStructure ); 
    
    
    /* 使能 FSMC_Bank1_NORSRAM4 */
    FSMC_NORSRAMCmd ( FSMC_Bank1_NORSRAMx, ENABLE );  
        
        
}


/**
 * @brief  初始化ILI9341寄存器
 * @param  无
 * @retval 无
 */
static void ILI9341_REG_Config ( void )
{
  lcdid = ILI9341_ReadID();
  
  if(lcdid == LCDID_ILI9341)
  {
    /*  Power control B (CFh)  */
    DEBUG_DELAY  ();
    ILI9341_Write_Cmd ( 0xCF  );
    ILI9341_Write_Data ( 0x00  );
    ILI9341_Write_Data ( 0x81  );
    ILI9341_Write_Data ( 0x30  );
    
    /*  Power on sequence control (EDh) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xED );
    ILI9341_Write_Data ( 0x64 );
    ILI9341_Write_Data ( 0x03 );
    ILI9341_Write_Data ( 0x12 );
    ILI9341_Write_Data ( 0x81 );
    
    /*  Driver timing control A (E8h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xE8 );
    ILI9341_Write_Data ( 0x85 );
    ILI9341_Write_Data ( 0x10 );
    ILI9341_Write_Data ( 0x78 );
    
    /*  Power control A (CBh) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xCB );
    ILI9341_Write_Data ( 0x39 );
    ILI9341_Write_Data ( 0x2C );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x34 );
    //ILI9341_Write_Data ( 0x02 );
    ILI9341_Write_Data ( 0x06 ); //原来是0x02改为0x06可防止液晶显示白屏时有条纹的情况
    
    /* Pump ratio control (F7h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xF7 );
    ILI9341_Write_Data ( 0x20 );
    
    /* Driver timing control B */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xEA );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x00 );
    
    /* Frame Rate Control (In Normal Mode/Full Colors) (B1h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xB1 );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x1B );
    
    /*  Display Function Control (B6h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xB6 );
    ILI9341_Write_Data ( 0x0A );
    ILI9341_Write_Data ( 0xA2 );
    
    /* Power Control 1 (C0h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xC0 );
    ILI9341_Write_Data ( 0x35 );
    
    /* Power Control 2 (C1h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xC1 );
    ILI9341_Write_Data ( 0x11 );
    
    /* VCOM Control 1 (C5h) */
    ILI9341_Write_Cmd ( 0xC5 );
    ILI9341_Write_Data ( 0x45 );
    ILI9341_Write_Data ( 0x45 );
    
    /*  VCOM Control 2 (C7h)  */
    ILI9341_Write_Cmd ( 0xC7 );
    ILI9341_Write_Data ( 0xA2 );
    
    /* Enable 3G (F2h) */
    ILI9341_Write_Cmd ( 0xF2 );
    ILI9341_Write_Data ( 0x00 );
    
    /* Gamma Set (26h) */
    ILI9341_Write_Cmd ( 0x26 );
    ILI9341_Write_Data ( 0x01 );
    DEBUG_DELAY ();
    
    /* Positive Gamma Correction */
    ILI9341_Write_Cmd ( 0xE0 ); //Set Gamma
    ILI9341_Write_Data ( 0x0F );
    ILI9341_Write_Data ( 0x26 );
    ILI9341_Write_Data ( 0x24 );
    ILI9341_Write_Data ( 0x0B );
    ILI9341_Write_Data ( 0x0E );
    ILI9341_Write_Data ( 0x09 );
    ILI9341_Write_Data ( 0x54 );
    ILI9341_Write_Data ( 0xA8 );
    ILI9341_Write_Data ( 0x46 );
    ILI9341_Write_Data ( 0x0C );
    ILI9341_Write_Data ( 0x17 );
    ILI9341_Write_Data ( 0x09 );
    ILI9341_Write_Data ( 0x0F );
    ILI9341_Write_Data ( 0x07 );
    ILI9341_Write_Data ( 0x00 );
    
    /* Negative Gamma Correction (E1h) */
    ILI9341_Write_Cmd ( 0XE1 ); //Set Gamma
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x19 );
    ILI9341_Write_Data ( 0x1B );
    ILI9341_Write_Data ( 0x04 );
    ILI9341_Write_Data ( 0x10 );
    ILI9341_Write_Data ( 0x07 );
    ILI9341_Write_Data ( 0x2A );
    ILI9341_Write_Data ( 0x47 );
    ILI9341_Write_Data ( 0x39 );
    ILI9341_Write_Data ( 0x03 );
    ILI9341_Write_Data ( 0x06 );
    ILI9341_Write_Data ( 0x06 );
    ILI9341_Write_Data ( 0x30 );
    ILI9341_Write_Data ( 0x38 );
    ILI9341_Write_Data ( 0x0F );
    
    /* memory access control set */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0x36 );     
    ILI9341_Write_Data ( 0xC8 );    /*竖屏  左上角到 (起点)到右下角 (终点)扫描方式*/
    DEBUG_DELAY ();
    
    /* column address control set */
    ILI9341_Write_Cmd ( CMD_SetCoordinateX ); 
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0xEF );
    
    /* page address control set */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( CMD_SetCoordinateY ); 
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x01 );
    ILI9341_Write_Data ( 0x3F );
    
    /*  Pixel Format Set (3Ah)  */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0x3a ); 
    ILI9341_Write_Data ( 0x55 );
    
    /* Sleep Out (11h)  */
    ILI9341_Write_Cmd ( 0x11 );    
    ILI9341_Delay ( 0xAFFf<<2 );
    DEBUG_DELAY ();
    
    /* Display ON (29h) */
    ILI9341_Write_Cmd ( 0x29 ); 
    }
  
  else if(lcdid == LCDID_ST7789V)
  {
    /*  Power control B (CFh)  */
    DEBUG_DELAY  ();
    ILI9341_Write_Cmd ( 0xCF  );
    ILI9341_Write_Data ( 0x00  );
    ILI9341_Write_Data ( 0xC1  );
    ILI9341_Write_Data ( 0x30  );
    
    /*  Power on sequence control (EDh) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xED );
    ILI9341_Write_Data ( 0x64 );
    ILI9341_Write_Data ( 0x03 );
    ILI9341_Write_Data ( 0x12 );
    ILI9341_Write_Data ( 0x81 );
    
    /*  Driver timing control A (E8h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xE8 );
    ILI9341_Write_Data ( 0x85 );
    ILI9341_Write_Data ( 0x10 );
    ILI9341_Write_Data ( 0x78 );
    
    /*  Power control A (CBh) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xCB );
    ILI9341_Write_Data ( 0x39 );
    ILI9341_Write_Data ( 0x2C );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x34 );
    ILI9341_Write_Data ( 0x02 );
    
    /* Pump ratio control (F7h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xF7 );
    ILI9341_Write_Data ( 0x20 );
    
    /* Driver timing control B */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xEA );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x00 );
    
    
    /* Power Control 1 (C0h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xC0 );   //Power control
    ILI9341_Write_Data ( 0x21 );  //VRH[5:0]
    
    /* Power Control 2 (C1h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xC1 );   //Power control
    ILI9341_Write_Data ( 0x11 );  //SAP[2:0];BT[3:0]
    
    /* VCOM Control 1 (C5h) */
    ILI9341_Write_Cmd ( 0xC5 );
    ILI9341_Write_Data ( 0x2D );
    ILI9341_Write_Data ( 0x33 );
    
    /*  VCOM Control 2 (C7h)  */
//    ILI9341_Write_Cmd ( 0xC7 );
//    ILI9341_Write_Data ( 0XC0 );
    
    /* memory access control set */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0x36 );   //Memory Access Control
    ILI9341_Write_Data ( 0x00 );  /*竖屏  左上角到 (起点)到右下角 (终点)扫描方式*/
    DEBUG_DELAY ();
    
    ILI9341_Write_Cmd(0x3A);   
    ILI9341_Write_Data(0x55); 
    
      /* Frame Rate Control (In Normal Mode/Full Colors) (B1h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xB1 );
    ILI9341_Write_Data ( 0x00 );
    ILI9341_Write_Data ( 0x17 );
    
    /*  Display Function Control (B6h) */
    DEBUG_DELAY ();
    ILI9341_Write_Cmd ( 0xB6 );
    ILI9341_Write_Data ( 0x0A );
    ILI9341_Write_Data ( 0xA2 );
    
    ILI9341_Write_Cmd(0xF6);                
    ILI9341_Write_Data(0x01); 
    ILI9341_Write_Data(0x30); 
    
    /* Enable 3G (F2h) */
    ILI9341_Write_Cmd ( 0xF2 );
    ILI9341_Write_Data ( 0x00 );
    
    /* Gamma Set (26h) */
    ILI9341_Write_Cmd ( 0x26 );
    ILI9341_Write_Data ( 0x01 );
    DEBUG_DELAY ();
    
    /* Positive Gamma Correction */
    ILI9341_Write_Cmd(0xe0); //Positive gamma
    ILI9341_Write_Data(0xd0);         
    ILI9341_Write_Data(0x00); 
    ILI9341_Write_Data(0x02); 
    ILI9341_Write_Data(0x07); 
    ILI9341_Write_Data(0x0b); 
    ILI9341_Write_Data(0x1a); 
    ILI9341_Write_Data(0x31); 
    ILI9341_Write_Data(0x54); 
    ILI9341_Write_Data(0x40); 
    ILI9341_Write_Data(0x29); 
    ILI9341_Write_Data(0x12); 
    ILI9341_Write_Data(0x12); 
    ILI9341_Write_Data(0x12); 
    ILI9341_Write_Data(0x17);

    /* Negative Gamma Correction (E1h) */
    ILI9341_Write_Cmd(0xe1); //Negative gamma
    ILI9341_Write_Data(0xd0); 
    ILI9341_Write_Data(0x00); 
    ILI9341_Write_Data(0x02); 
    ILI9341_Write_Data(0x07); 
    ILI9341_Write_Data(0x05); 
    ILI9341_Write_Data(0x25); 
    ILI9341_Write_Data(0x2d); 
    ILI9341_Write_Data(0x44); 
    ILI9341_Write_Data(0x45); 
    ILI9341_Write_Data(0x1c); 
    ILI9341_Write_Data(0x18); 
    ILI9341_Write_Data(0x16); 
    ILI9341_Write_Data(0x1c); 
    ILI9341_Write_Data(0x1d); 
  
    
//    /* column address control set */
//    ILI9341_Write_Cmd ( CMD_SetCoordinateX ); 
//    ILI9341_Write_Data ( 0x00 );
//    ILI9341_Write_Data ( 0x00 );
//    ILI9341_Write_Data ( 0x00 );
//    ILI9341_Write_Data ( 0xEF );
//    
//    /* page address control set */
//    DEBUG_DELAY ();
//    ILI9341_Write_Cmd ( CMD_SetCoordinateY ); 
//    ILI9341_Write_Data ( 0x00 );
//    ILI9341_Write_Data ( 0x00 );
//    ILI9341_Write_Data ( 0x01 );
//    ILI9341_Write_Data ( 0x3F );
    
    
    /* Sleep Out (11h)  */
    ILI9341_Write_Cmd ( 0x11 );      //Exit Sleep
    ILI9341_Delay ( 0xAFFf<<2 );
    DEBUG_DELAY ();
    
    /* Display ON (29h) */
    ILI9341_Write_Cmd ( 0x29 );   //Display on
    
    ILI9341_Write_Cmd(0x2c);
  }
    
}


/**
 * @brief  ILI9341初始化函数,如果要用到lcd,一定要调用这个函数
 * @param  无
 * @retval 无
 */
void ILI9341_Init ( void )
{
    ILI9341_GPIO_Config ();
    ILI9341_FSMC_Config ();
    
    ILI9341_BackLed_Control ( ENABLE );      //点亮LCD背光灯
    ILI9341_Rst ();
    ILI9341_REG_Config ();
    
    //设置默认扫描方向,其中 6 模式为大部分液晶例程的默认显示方向  
    ILI9341_GramScan(LCD_SCAN_MODE);
}


/**
 * @brief  ILI9341背光LED控制
 * @param  enumState :决定是否使能背光LED
  *   该参数为以下值之一:
  *     @arg ENABLE :使能背光LED
  *     @arg DISABLE :禁用背光LED
 * @retval 无
 */
void ILI9341_BackLed_Control ( FunctionalState enumState )
{
    if ( enumState )
        GPIO_ResetBits ( ILI9341_BK_PORT, ILI9341_BK_PIN );    
    else
        GPIO_SetBits ( ILI9341_BK_PORT, ILI9341_BK_PIN );
        
}


/**
 * @brief  读取LCD驱动芯片ID函数,可用于测试底层的读写函数
 * @param  无
 * @retval 正常时返回值为LCD驱动芯片ID: LCDID_ILI9341/LCDID_ST7789V
 *         否则返回: LCDID_UNKNOWN
 */
uint16_t ILI9341_ReadID(void)
{
    uint16_t id = 0;
    
    ILI9341_Write_Cmd(0x04);
    ILI9341_Read_Data();
    ILI9341_Read_Data();
    id = ILI9341_Read_Data();
    id <<= 8;
    id |= ILI9341_Read_Data();
    
  if(id == LCDID_ST7789V)
  {
    return id;
  }
  else
  {
    ILI9341_Write_Cmd(0xD3);
    ILI9341_Read_Data();
    ILI9341_Read_Data();
    id = ILI9341_Read_Data();
    id <<= 8;
    id |= ILI9341_Read_Data();
    if(id == LCDID_ILI9341)
    {
      return id;
    }
  }
  
    return LCDID_UNKNOWN;
}


/**
 * @brief  ILI9341 软件复位
 * @param  无
 * @retval 无
 */
void ILI9341_Rst ( void )
{            
    GPIO_ResetBits ( ILI9341_RST_PORT, ILI9341_RST_PIN );     //低电平复位

    ILI9341_Delay ( 0xAFF );                        

    GPIO_SetBits ( ILI9341_RST_PORT, ILI9341_RST_PIN );              

    ILI9341_Delay ( 0xAFF );     
    
}




/**
 * @brief  设置ILI9341的GRAM的扫描方向 
 * @param  ucOption :选择GRAM的扫描方向 
 *     @arg 0-7 :参数可选值为0-7这八个方向
 *
 *    !!!其中0、3、5、6 模式适合从左至右显示文字,
 *                不推荐使用其它模式显示文字    其它模式显示文字会有镜像效果            
 *        
 *    其中0、2、4、6 模式的X方向像素为240,Y方向像素为320
 *    其中1、3、5、7 模式下X方向像素为320,Y方向像素为240
 *
 *    其中 6 模式为大部分液晶例程的默认显示方向
 *    其中 3 模式为摄像头例程使用的方向
 *    其中 0 模式为BMP图片显示例程使用的方向
 *
 * @retval 无
 * @note  坐标图例:A表示向上,V表示向下,<表示向左,>表示向右
                    X表示X轴,Y表示Y轴

                                             LCDID_ILI9341
------------------------------------------------------------
模式0:                .        模式1:        .    模式2:            .    模式3:                    
                    A        .                    A        .        A                    .        A                                    
                    |        .                    |        .        |                    .        |                            
                    Y        .                    X        .        Y                    .        X                    
                    0        .                    1        .        2                    .        3                    
    <--- X0 o        .    <----Y1    o        .        o 2X--->  .        o 3Y--->    
------------------------------------------------------------    
模式4:                .    模式5:            .    模式6:            .    模式7:                    
    <--- X4 o        .    <--- Y5 o        .        o 6X--->  .        o 7Y--->    
                    4        .                    5        .        6                    .        7    
                    Y        .                    X        .        Y                    .        X                        
                    |        .                    |        .        |                    .        |                            
                    V        .                    V        .        V                    .        V        
---------------------------------------------------------                
                                             LCD屏示例
                                |-----------------|
                                |            野火Logo        |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |-----------------|
                                屏幕正面(宽240,高320)
                                
                                
                                
                                
                                      LCDID_ST7789V                            
------------------------------------------------------------
模式0:                .        模式1:        .    模式2:            .    模式3:                    
    o 0X--->      .        o 1Y--->  .    <--- X2 o        .    <--- Y3 o                
    0                        .        1                    .                    2        .                    3            
    Y                        .        X                    .                    Y        .                    X        
    |                        .        |                    .                    |        .                    |            
    V                                V                    .                    V        .                    V        
------------------------------------------------------------    
模式4:                .    模式5:            .    模式6:        .    模式7:                    
    A                        .        A                    .                    A    .                    A    
    |                        .        |                    .                    |    .                    |
    Y                        .        X                    .                    Y    .                    X                
    4                        .        5                    .                    6    .                    7                
    o 4X--->      .        o 5Y--->  .    <--- X6 o    .    <--- Y7 o    
---------------------------------------------------------                
                                             LCD屏示例
                                |-----------------|
                                |            野火Logo        |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |                                    |
                                |-----------------|
                                屏幕正面(宽240,高320)
 *******************************************************/
void ILI9341_GramScan ( uint8_t ucOption )
{    
    //参数检查,只可输入0-7
    if(ucOption >7 )
        return;
    
    //根据模式更新LCD_SCAN_MODE的值,主要用于触摸屏选择计算参数
    LCD_SCAN_MODE = ucOption;
    
    //根据模式更新XY方向的像素宽度
    if(ucOption%2 == 0)    
    {
        //0 2 4 6模式下X方向像素宽度为240,Y方向为320
        LCD_X_LENGTH = ILI9341_LESS_PIXEL;
        LCD_Y_LENGTH =    ILI9341_MORE_PIXEL;
    }
    else                
    {
        //1 3 5 7模式下X方向像素宽度为320,Y方向为240
        LCD_X_LENGTH = ILI9341_MORE_PIXEL;
        LCD_Y_LENGTH =    ILI9341_LESS_PIXEL; 
    }

    //0x36命令参数的高3位可用于设置GRAM扫描方向    
    ILI9341_Write_Cmd ( 0x36 );
  if(lcdid == LCDID_ILI9341)
  {
    ILI9341_Write_Data ( 0x08 |(ucOption<<5));//根据ucOption的值设置LCD参数,共0-7种模式
  }
  else if(lcdid == LCDID_ST7789V)
  {
    ILI9341_Write_Data ( 0x00 |(ucOption<<5));//根据ucOption的值设置LCD参数,共0-7种模式
  }
    ILI9341_Write_Cmd ( CMD_SetCoordinateX ); 
    ILI9341_Write_Data ( 0x00 );        /* x 起始坐标高8位 */
    ILI9341_Write_Data ( 0x00 );        /* x 起始坐标低8位 */
    ILI9341_Write_Data ( ((LCD_X_LENGTH-1)>>8)&0xFF ); /* x 结束坐标高8位 */    
    ILI9341_Write_Data ( (LCD_X_LENGTH-1)&0xFF );                /* x 结束坐标低8位 */

    ILI9341_Write_Cmd ( CMD_SetCoordinateY ); 
    ILI9341_Write_Data ( 0x00 );        /* y 起始坐标高8位 */
    ILI9341_Write_Data ( 0x00 );        /* y 起始坐标低8位 */
    ILI9341_Write_Data ( ((LCD_Y_LENGTH-1)>>8)&0xFF );    /* y 结束坐标高8位 */     
    ILI9341_Write_Data ( (LCD_Y_LENGTH-1)&0xFF );                /* y 结束坐标低8位 */

    /* write gram start */
    ILI9341_Write_Cmd ( CMD_SetPixel );    
}



/**
 * @brief  在ILI9341显示器上开辟一个窗口
 * @param  usX :在特定扫描方向下窗口的起点X坐标
 * @param  usY :在特定扫描方向下窗口的起点Y坐标
 * @param  usWidth :窗口的宽度
 * @param  usHeight :窗口的高度
 * @retval 无
 */
void ILI9341_OpenWindow ( uint16_t usX, uint16_t usY, uint16_t usWidth, uint16_t usHeight )
{    
    ILI9341_Write_Cmd ( CMD_SetCoordinateX );                  /* 设置X坐标 */
    ILI9341_Write_Data ( usX >> 8  );     /* 先高8位,然后低8位 */
    ILI9341_Write_Data ( usX & 0xff  );     /* 设置起始点和结束点*/
    ILI9341_Write_Data ( ( usX + usWidth - 1 ) >> 8  );
    ILI9341_Write_Data ( ( usX + usWidth - 1 ) & 0xff  );

    ILI9341_Write_Cmd ( CMD_SetCoordinateY );                  /* 设置Y坐标*/
    ILI9341_Write_Data ( usY >> 8  );
    ILI9341_Write_Data ( usY & 0xff  );
    ILI9341_Write_Data ( ( usY + usHeight - 1 ) >> 8 );
    ILI9341_Write_Data ( ( usY + usHeight - 1) & 0xff );
    
}


/**
 * @brief  设定ILI9341的光标坐标
 * @param  usX :在特定扫描方向下光标的X坐标
 * @param  usY :在特定扫描方向下光标的Y坐标
 * @retval 无
 */
static void ILI9341_SetCursor ( uint16_t usX, uint16_t usY )    
{
    ILI9341_OpenWindow ( usX, usY, 1, 1 );
}


/**
 * @brief  在ILI9341显示器上以某一颜色填充像素点
 * @param  ulAmout_Point :要填充颜色的像素点的总数目
 * @param  usColor :颜色
 * @retval 无
 */
static __inline void ILI9341_FillColor ( uint32_t ulAmout_Point, uint16_t usColor )
{
    uint32_t i = 0;
    
    
    /* memory write */
    ILI9341_Write_Cmd ( CMD_SetPixel );    
        
    for ( i = 0; i < ulAmout_Point; i ++ )
        ILI9341_Write_Data ( usColor );
        
    
}


/**
 * @brief  对ILI9341显示器的某一窗口以某种颜色进行清屏
 * @param  usX :在特定扫描方向下窗口的起点X坐标
 * @param  usY :在特定扫描方向下窗口的起点Y坐标
 * @param  usWidth :窗口的宽度
 * @param  usHeight :窗口的高度
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_Clear ( uint16_t usX, uint16_t usY, uint16_t usWidth, uint16_t usHeight )
{
    ILI9341_OpenWindow ( usX, usY, usWidth, usHeight );

    ILI9341_FillColor ( usWidth * usHeight, CurrentBackColor );        
    
}


/**
 * @brief  对ILI9341显示器的某一点以某种颜色进行填充
 * @param  usX :在特定扫描方向下该点的X坐标
 * @param  usY :在特定扫描方向下该点的Y坐标
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_SetPointPixel ( uint16_t usX, uint16_t usY )    
{    
    if ( ( usX < LCD_X_LENGTH ) && ( usY < LCD_Y_LENGTH ) )
  {
        ILI9341_SetCursor ( usX, usY );
        
        ILI9341_FillColor ( 1, CurrentTextColor );
    }
    
}


/**
 * @brief  读取 GRAM 的一个像素数据
 * @param  无
 * @retval 像素数据
 */
static uint16_t ILI9341_Read_PixelData ( void )    
{    
    uint16_t usRG=0, usB=0 ;

    
    ILI9341_Write_Cmd ( 0x2E );   /* 读数据 */
    //去掉前一次读取结果
    ILI9341_Read_Data ();           /*FIRST READ OUT DUMMY DATA*/
    
    //获取红色通道与绿色通道的值
    usRG = ILI9341_Read_Data ();      /*READ OUT RED AND GREEN DATA  */
    usB = ILI9341_Read_Data ();          /*READ OUT BLUE DATA*/

  return ( (usRG&0xF800)| ((usRG<<3)&0x7E0) | (usB>>11) );
}



/**
 * @brief  获取 ILI9341 显示器上某一个坐标点的像素数据
 * @param  usX :在特定扫描方向下该点的X坐标
 * @param  usY :在特定扫描方向下该点的Y坐标
 * @retval 像素数据
 */
uint16_t ILI9341_GetPointPixel ( uint16_t usX, uint16_t usY )
{ 
    uint16_t usPixelData;

    
    ILI9341_SetCursor ( usX, usY );
    
    usPixelData = ILI9341_Read_PixelData ();
    
    return usPixelData;
    
}


/**
 * @brief  在 ILI9341 显示器上使用 Bresenham 算法画线段 
 * @param  usX1 :在特定扫描方向下线段的一个端点X坐标
 * @param  usY1 :在特定扫描方向下线段的一个端点Y坐标
 * @param  usX2 :在特定扫描方向下线段的另一个端点X坐标
 * @param  usY2 :在特定扫描方向下线段的另一个端点Y坐标
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DrawLine ( uint16_t usX1, uint16_t usY1, uint16_t usX2, uint16_t usY2 )
{
    uint16_t us; 
    uint16_t usX_Current, usY_Current;
    
    int32_t lError_X = 0, lError_Y = 0, lDelta_X, lDelta_Y, lDistance; 
    int32_t lIncrease_X, lIncrease_Y;     
    
    
    lDelta_X = usX2 - usX1; //计算坐标增量 
    lDelta_Y = usY2 - usY1; 
    
    usX_Current = usX1; 
    usY_Current = usY1; 
    
    
    if ( lDelta_X > 0 ) 
        lIncrease_X = 1; //设置单步方向 
    
    else if ( lDelta_X == 0 ) 
        lIncrease_X = 0;//垂直线 
    
    else 
  { 
    lIncrease_X = -1;
    lDelta_X = - lDelta_X;
  } 

    
    if ( lDelta_Y > 0 )
        lIncrease_Y = 1; 
    
    else if ( lDelta_Y == 0 )
        lIncrease_Y = 0;//水平线 
    
    else 
  {
    lIncrease_Y = -1;
    lDelta_Y = - lDelta_Y;
  } 

    
    if (  lDelta_X > lDelta_Y )
        lDistance = lDelta_X; //选取基本增量坐标轴 
    
    else 
        lDistance = lDelta_Y; 

    
    for ( us = 0; us <= lDistance + 1; us ++ )//画线输出 
    {  
        ILI9341_SetPointPixel ( usX_Current, usY_Current );//画点 
        
        lError_X += lDelta_X ; 
        lError_Y += lDelta_Y ; 
        
        if ( lError_X > lDistance ) 
        { 
            lError_X -= lDistance; 
            usX_Current += lIncrease_X; 
        }  
        
        if ( lError_Y > lDistance ) 
        { 
            lError_Y -= lDistance; 
            usY_Current += lIncrease_Y; 
        } 
        
    }  
    
    
}   


/**
 * @brief  在 ILI9341 显示器上画一个矩形
 * @param  usX_Start :在特定扫描方向下矩形的起始点X坐标
 * @param  usY_Start :在特定扫描方向下矩形的起始点Y坐标
 * @param  usWidth:矩形的宽度(单位:像素)
 * @param  usHeight:矩形的高度(单位:像素)
 * @param  ucFilled :选择是否填充该矩形
  *   该参数为以下值之一:
  *     @arg 0 :空心矩形
  *     @arg 1 :实心矩形 
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DrawRectangle ( uint16_t usX_Start, uint16_t usY_Start, uint16_t usWidth, uint16_t usHeight, uint8_t ucFilled )
{
    if ( ucFilled )
    {
        ILI9341_OpenWindow ( usX_Start, usY_Start, usWidth, usHeight );
        ILI9341_FillColor ( usWidth * usHeight ,CurrentTextColor);    
    }
    else
    {
        ILI9341_DrawLine ( usX_Start, usY_Start, usX_Start + usWidth - 1, usY_Start );
        ILI9341_DrawLine ( usX_Start, usY_Start + usHeight - 1, usX_Start + usWidth - 1, usY_Start + usHeight - 1 );
        ILI9341_DrawLine ( usX_Start, usY_Start, usX_Start, usY_Start + usHeight - 1 );
        ILI9341_DrawLine ( usX_Start + usWidth - 1, usY_Start, usX_Start + usWidth - 1, usY_Start + usHeight - 1 );        
    }

}


/**
 * @brief  在 ILI9341 显示器上使用 Bresenham 算法画圆
 * @param  usX_Center :在特定扫描方向下圆心的X坐标
 * @param  usY_Center :在特定扫描方向下圆心的Y坐标
 * @param  usRadius:圆的半径(单位:像素)
 * @param  ucFilled :选择是否填充该圆
  *   该参数为以下值之一:
  *     @arg 0 :空心圆
  *     @arg 1 :实心圆
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DrawCircle ( uint16_t usX_Center, uint16_t usY_Center, uint16_t usRadius, uint8_t ucFilled )
{
    int16_t sCurrentX, sCurrentY;
    int16_t sError;
    
    
    sCurrentX = 0; sCurrentY = usRadius;      
    
    sError = 3 - ( usRadius << 1 );     //判断下个点位置的标志
    
    
    while ( sCurrentX <= sCurrentY )
    {
        int16_t sCountY;
        
        
        if ( ucFilled )             
            for ( sCountY = sCurrentX; sCountY <= sCurrentY; sCountY ++ ) 
            {                      
                ILI9341_SetPointPixel ( usX_Center + sCurrentX, usY_Center + sCountY );           //1,研究对象 
                ILI9341_SetPointPixel ( usX_Center - sCurrentX, usY_Center + sCountY );           //2       
                ILI9341_SetPointPixel ( usX_Center - sCountY,   usY_Center + sCurrentX );           //3
                ILI9341_SetPointPixel ( usX_Center - sCountY,   usY_Center - sCurrentX );           //4
                ILI9341_SetPointPixel ( usX_Center - sCurrentX, usY_Center - sCountY );           //5    
        ILI9341_SetPointPixel ( usX_Center + sCurrentX, usY_Center - sCountY );           //6
                ILI9341_SetPointPixel ( usX_Center + sCountY,   usY_Center - sCurrentX );           //7     
        ILI9341_SetPointPixel ( usX_Center + sCountY,   usY_Center + sCurrentX );           //0                
            }
        
        else
        {          
            ILI9341_SetPointPixel ( usX_Center + sCurrentX, usY_Center + sCurrentY );             //1,研究对象
            ILI9341_SetPointPixel ( usX_Center - sCurrentX, usY_Center + sCurrentY );             //2      
            ILI9341_SetPointPixel ( usX_Center - sCurrentY, usY_Center + sCurrentX );             //3
            ILI9341_SetPointPixel ( usX_Center - sCurrentY, usY_Center - sCurrentX );             //4
            ILI9341_SetPointPixel ( usX_Center - sCurrentX, usY_Center - sCurrentY );             //5       
            ILI9341_SetPointPixel ( usX_Center + sCurrentX, usY_Center - sCurrentY );             //6
            ILI9341_SetPointPixel ( usX_Center + sCurrentY, usY_Center - sCurrentX );             //7 
            ILI9341_SetPointPixel ( usX_Center + sCurrentY, usY_Center + sCurrentX );             //0
    }            
        
        
        sCurrentX ++;

        
        if ( sError < 0 ) 
            sError += 4 * sCurrentX + 6;      
        
        else
        {
            sError += 10 + 4 * ( sCurrentX - sCurrentY );   
            sCurrentY --;
        }     
        
        
    }
    
    
}

/**
 * @brief  在 ILI9341 显示器上显示一个英文字符
 * @param  usX :在特定扫描方向下字符的起始X坐标
 * @param  usY :在特定扫描方向下该点的起始Y坐标
 * @param  cChar :要显示的英文字符
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispChar_EN ( uint16_t usX, uint16_t usY, const char cChar )
{
    uint8_t  byteCount, bitCount,fontLength;    
    uint16_t ucRelativePositon;
    uint8_t *Pfont;
    
    //对ascii码表偏移(字模表不包含ASCII表的前32个非图形符号)
    ucRelativePositon = cChar - ' ';
    
    //每个字模的字节数
    fontLength = (LCD_Currentfonts->Width*LCD_Currentfonts->Height)/8;
        
    //字模首地址
    /*ascii码表偏移值乘以每个字模的字节数,求出字模的偏移位置*/
    Pfont = (uint8_t *)&LCD_Currentfonts->table[ucRelativePositon * fontLength];
    
    //设置显示窗口
    ILI9341_OpenWindow ( usX, usY, LCD_Currentfonts->Width, LCD_Currentfonts->Height);
    
    ILI9341_Write_Cmd ( CMD_SetPixel );            

    //按字节读取字模数据
    //由于前面直接设置了显示窗口,显示数据会自动换行
    for ( byteCount = 0; byteCount < fontLength; byteCount++ )
    {
            //一位一位处理要显示的颜色
            for ( bitCount = 0; bitCount < 8; bitCount++ )
            {
                    if ( Pfont[byteCount] & (0x80>>bitCount) )
                        ILI9341_Write_Data ( CurrentTextColor );            
                    else
                        ILI9341_Write_Data ( CurrentBackColor );
            }    
    }    
}


/**
 * @brief  在 ILI9341 显示器上显示英文字符串
 * @param  line :在特定扫描方向下字符串的起始Y坐标
  *   本参数可使用宏LINE(0)、LINE(1)等方式指定文字坐标,
  *   宏LINE(x)会根据当前选择的字体来计算Y坐标值。
    *        显示中文且使用LINE宏时,需要把英文字体设置成Font8x16
 * @param  pStr :要显示的英文字符串的首地址
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispStringLine_EN (  uint16_t line,  char * pStr )
{
    uint16_t usX = 0;
    
    while ( * pStr != '\0' )
    {
        if ( ( usX - ILI9341_DispWindow_X_Star + LCD_Currentfonts->Width ) > LCD_X_LENGTH )
        {
            usX = ILI9341_DispWindow_X_Star;
            line += LCD_Currentfonts->Height;
        }
        
        if ( ( line - ILI9341_DispWindow_Y_Star + LCD_Currentfonts->Height ) > LCD_Y_LENGTH )
        {
            usX = ILI9341_DispWindow_X_Star;
            line = ILI9341_DispWindow_Y_Star;
        }
        
        ILI9341_DispChar_EN ( usX, line, * pStr);
        
        pStr ++;
        
        usX += LCD_Currentfonts->Width;
        
    }
    
}


/**
 * @brief  在 ILI9341 显示器上显示英文字符串
 * @param  usX :在特定扫描方向下字符的起始X坐标
 * @param  usY :在特定扫描方向下字符的起始Y坐标
 * @param  pStr :要显示的英文字符串的首地址
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispString_EN (     uint16_t usX ,uint16_t usY,  char * pStr )
{
    while ( * pStr != '\0' )
    {
        if ( ( usX - ILI9341_DispWindow_X_Star + LCD_Currentfonts->Width ) > LCD_X_LENGTH )
        {
            usX = ILI9341_DispWindow_X_Star;
            usY += LCD_Currentfonts->Height;
        }
        
        if ( ( usY - ILI9341_DispWindow_Y_Star + LCD_Currentfonts->Height ) > LCD_Y_LENGTH )
        {
            usX = ILI9341_DispWindow_X_Star;
            usY = ILI9341_DispWindow_Y_Star;
        }
        
        ILI9341_DispChar_EN ( usX, usY, * pStr);
        
        pStr ++;
        
        usX += LCD_Currentfonts->Width;
        
    }
    
}


/**
 * @brief  在 ILI9341 显示器上显示英文字符串(沿Y轴方向)
 * @param  usX :在特定扫描方向下字符的起始X坐标
 * @param  usY :在特定扫描方向下字符的起始Y坐标
 * @param  pStr :要显示的英文字符串的首地址
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispString_EN_YDir (     uint16_t usX,uint16_t usY ,  char * pStr )
{    
    while ( * pStr != '\0' )
    {
        if ( ( usY - ILI9341_DispWindow_Y_Star + LCD_Currentfonts->Height ) >LCD_Y_LENGTH  )
        {
            usY = ILI9341_DispWindow_Y_Star;
            usX += LCD_Currentfonts->Width;
        }
        
        if ( ( usX - ILI9341_DispWindow_X_Star + LCD_Currentfonts->Width ) >  LCD_X_LENGTH)
        {
            usX = ILI9341_DispWindow_X_Star;
            usY = ILI9341_DispWindow_Y_Star;
        }
        
        ILI9341_DispChar_EN ( usX, usY, * pStr);
        
        pStr ++;
        
        usY += LCD_Currentfonts->Height;        
    }    
}

/**
 * @brief  在 ILI9341 显示器上显示一个中文字符
 * @param  usX :在特定扫描方向下字符的起始X坐标
 * @param  usY :在特定扫描方向下字符的起始Y坐标
 * @param  usChar :要显示的中文字符(国标码)
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */ 
void ILI9341_DispChar_CH ( uint16_t usX, uint16_t usY, uint16_t usChar )
{
    uint8_t rowCount, bitCount;
    uint8_t ucBuffer [ WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8 ];    
  uint16_t usTemp;     

    //设置显示窗口
    ILI9341_OpenWindow ( usX, usY, WIDTH_CH_CHAR, HEIGHT_CH_CHAR );
    
    ILI9341_Write_Cmd ( CMD_SetPixel );
    
    //取字模数据  
  GetGBKCode ( ucBuffer, usChar );    
    
    for ( rowCount = 0; rowCount < HEIGHT_CH_CHAR; rowCount++ )
    {
    /* 取出两个字节的数据,在lcd上即是一个汉字的一行 */
        usTemp = ucBuffer [ rowCount * 2 ];
        usTemp = ( usTemp << 8 );
        usTemp |= ucBuffer [ rowCount * 2 + 1 ];
        
        for ( bitCount = 0; bitCount < WIDTH_CH_CHAR; bitCount ++ )
        {            
            if ( usTemp & ( 0x8000 >> bitCount ) )  //高位在前 
              ILI9341_Write_Data ( CurrentTextColor );                
            else
                ILI9341_Write_Data ( CurrentBackColor );            
        }        
    }
    
}


/**
 * @brief  在 ILI9341 显示器上显示中文字符串
 * @param  line :在特定扫描方向下字符串的起始Y坐标
  *   本参数可使用宏LINE(0)、LINE(1)等方式指定文字坐标,
  *   宏LINE(x)会根据当前选择的字体来计算Y坐标值。
    *        显示中文且使用LINE宏时,需要把英文字体设置成Font8x16
 * @param  pStr :要显示的英文字符串的首地址
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispString_CH (     uint16_t usX , uint16_t usY, char * pStr )
{    
    uint16_t usCh;

    
    while( * pStr != '\0' )
    {        
        if ( ( usX - ILI9341_DispWindow_X_Star + WIDTH_CH_CHAR ) > LCD_X_LENGTH )
        {
            usX = ILI9341_DispWindow_X_Star;
            usY += HEIGHT_CH_CHAR;
        }
        
        if ( ( usY - ILI9341_DispWindow_Y_Star + HEIGHT_CH_CHAR ) > LCD_Y_LENGTH )
        {
            usX = ILI9341_DispWindow_X_Star;
            usY = ILI9341_DispWindow_Y_Star;
        }    
        
        usCh = * ( uint16_t * ) pStr;    
      usCh = ( usCh << 8 ) + ( usCh >> 8 );

        ILI9341_DispChar_CH ( usX, usY, usCh );
        
        usX += WIDTH_CH_CHAR;
        
        pStr += 2;           //一个汉字两个字节 

    }       
    
}


/**
 * @brief  在 ILI9341 显示器上显示中英文字符串
 * @param  line :在特定扫描方向下字符串的起始Y坐标
  *   本参数可使用宏LINE(0)、LINE(1)等方式指定文字坐标,
  *   宏LINE(x)会根据当前选择的字体来计算Y坐标值。
    *        显示中文且使用LINE宏时,需要把英文字体设置成Font8x16
 * @param  pStr :要显示的字符串的首地址
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispStringLine_EN_CH (  uint16_t line, char * pStr )
{
    uint16_t usCh;
    uint16_t usX = 0;
    
    while( * pStr != '\0' )
    {
        if ( * pStr <= 126 )                   //英文字符
        {
            if ( ( usX - ILI9341_DispWindow_X_Star + LCD_Currentfonts->Width ) > LCD_X_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                line += LCD_Currentfonts->Height;
            }
            
            if ( ( line - ILI9341_DispWindow_Y_Star + LCD_Currentfonts->Height ) > LCD_Y_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                line = ILI9341_DispWindow_Y_Star;
            }            
        
          ILI9341_DispChar_EN ( usX, line, * pStr );
            
            usX +=  LCD_Currentfonts->Width;
        
          pStr ++;

        }
        
        else                                //汉字字符
        {
            if ( ( usX - ILI9341_DispWindow_X_Star + WIDTH_CH_CHAR ) > LCD_X_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                line += HEIGHT_CH_CHAR;
            }
            
            if ( ( line - ILI9341_DispWindow_Y_Star + HEIGHT_CH_CHAR ) > LCD_Y_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                line = ILI9341_DispWindow_Y_Star;
            }    
            
            usCh = * ( uint16_t * ) pStr;    
            
            usCh = ( usCh << 8 ) + ( usCh >> 8 );        

            ILI9341_DispChar_CH ( usX, line, usCh );
            
            usX += WIDTH_CH_CHAR;
            
            pStr += 2;           //一个汉字两个字节 
        
    }
        
  }    
} 

/**
 * @brief  在 ILI9341 显示器上显示中英文字符串
 * @param  usX :在特定扫描方向下字符的起始X坐标
 * @param  usY :在特定扫描方向下字符的起始Y坐标
 * @param  pStr :要显示的字符串的首地址
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispString_EN_CH (     uint16_t usX , uint16_t usY, char * pStr )
{
    uint16_t usCh;
    
    while( * pStr != '\0' )
    {
        if ( * pStr <= 126 )                   //英文字符
        {
            if ( ( usX - ILI9341_DispWindow_X_Star + LCD_Currentfonts->Width ) > LCD_X_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                usY += LCD_Currentfonts->Height;
            }
            
            if ( ( usY - ILI9341_DispWindow_Y_Star + LCD_Currentfonts->Height ) > LCD_Y_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                usY = ILI9341_DispWindow_Y_Star;
            }            
        
          ILI9341_DispChar_EN ( usX, usY, * pStr );
            
            usX +=  LCD_Currentfonts->Width;
        
          pStr ++;

        }
        
        else                                //汉字字符
        {
            if ( ( usX - ILI9341_DispWindow_X_Star + WIDTH_CH_CHAR ) > LCD_X_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                usY += HEIGHT_CH_CHAR;
            }
            
            if ( ( usY - ILI9341_DispWindow_Y_Star + HEIGHT_CH_CHAR ) > LCD_Y_LENGTH )
            {
                usX = ILI9341_DispWindow_X_Star;
                usY = ILI9341_DispWindow_Y_Star;
            }    
            
            usCh = * ( uint16_t * ) pStr;    
            
            usCh = ( usCh << 8 ) + ( usCh >> 8 );        

            ILI9341_DispChar_CH ( usX, usY, usCh );
            
            usX += WIDTH_CH_CHAR;
            
            pStr += 2;           //一个汉字两个字节 
        
    }
        
  }    
} 

/**
 * @brief  在 ILI9341 显示器上显示中英文字符串(沿Y轴方向)
 * @param  usX :在特定扫描方向下字符的起始X坐标
 * @param  usY :在特定扫描方向下字符的起始Y坐标
 * @param  pStr :要显示的中英文字符串的首地址
 * @note 可使用LCD_SetBackColor、LCD_SetTextColor、LCD_SetColors函数设置颜色
 * @retval 无
 */
void ILI9341_DispString_EN_CH_YDir (  uint16_t usX,uint16_t usY , char * pStr )
{
    uint16_t usCh;
    
    while( * pStr != '\0' )
    {            
            //统一使用汉字的宽高来计算换行
            if ( ( usY - ILI9341_DispWindow_Y_Star + HEIGHT_CH_CHAR ) >LCD_Y_LENGTH  )
            {
                usY = ILI9341_DispWindow_Y_Star;
                usX += WIDTH_CH_CHAR;
            }            
            if ( ( usX - ILI9341_DispWindow_X_Star + WIDTH_CH_CHAR ) >  LCD_X_LENGTH)
            {
                usX = ILI9341_DispWindow_X_Star;
                usY = ILI9341_DispWindow_Y_Star;
            }
            
        //显示    
        if ( * pStr <= 126 )                   //英文字符
        {            
            ILI9341_DispChar_EN ( usX, usY, * pStr);
            
            pStr ++;
            
            usY += HEIGHT_CH_CHAR;        
        }
        else                                //汉字字符
        {            
            usCh = * ( uint16_t * ) pStr;    
            
            usCh = ( usCh << 8 ) + ( usCh >> 8 );        

            ILI9341_DispChar_CH ( usX,usY , usCh );
            
            usY += HEIGHT_CH_CHAR;
            
            pStr += 2;           //一个汉字两个字节 
        
    }
        
  }    
} 

/***********************缩放字体****************************/
#define ZOOMMAXBUFF 16384
uint8_t zoomBuff[ZOOMMAXBUFF] = {0};    //用于缩放的缓存,最大支持到128*128
uint8_t zoomTempBuff[1024] = {0};

/**
 * @brief  缩放字模,缩放后的字模由1个像素点由8个数据位来表示
                                        0x01表示笔迹,0x00表示空白区
 * @param  in_width :原始字符宽度
 * @param  in_heig :原始字符高度
 * @param  out_width :缩放后的字符宽度
 * @param  out_heig:缩放后的字符高度
 * @param  in_ptr :字库输入指针    注意:1pixel 1bit
 * @param  out_ptr :缩放后的字符输出指针 注意: 1pixel 8bit
 *        out_ptr实际上没有正常输出,改成了直接输出到全局指针zoomBuff中
 * @param  en_cn :0为英文,1为中文
 * @retval 无
 */
void ILI9341_zoomChar(uint16_t in_width,    //原始字符宽度
                                    uint16_t in_heig,        //原始字符高度
                                    uint16_t out_width,    //缩放后的字符宽度
                                    uint16_t out_heig,    //缩放后的字符高度
                                    uint8_t *in_ptr,    //字库输入指针    注意:1pixel 1bit
                                    uint8_t *out_ptr, //缩放后的字符输出指针 注意: 1pixel 8bit
                                    uint8_t en_cn)        //0为英文,1为中文    
{
    uint8_t *pts,*ots;
    //根据源字模及目标字模大小,设定运算比例因子,左移16是为了把浮点运算转成定点运算
    unsigned int xrIntFloat_16=(in_width<<16)/out_width+1; 
  unsigned int yrIntFloat_16=(in_heig<<16)/out_heig+1;
    
    unsigned int srcy_16=0;
    unsigned int y,x;
    uint8_t *pSrcLine;
    
    uint16_t byteCount,bitCount;
    
    //检查参数是否合法
    if(in_width >= 32) return;                                                //字库不允许超过32像素
    if(in_width * in_heig == 0) return;    
    if(in_width * in_heig >= 1024 ) return;                     //限制输入最大 32*32
    
    if(out_width * out_heig == 0) return;    
    if(out_width * out_heig >= ZOOMMAXBUFF ) return; //限制最大缩放 128*128
    pts = (uint8_t*)&zoomTempBuff;
    
    //为方便运算,字库的数据由1 pixel/1bit 映射到1pixel/8bit
    //0x01表示笔迹,0x00表示空白区
    if(en_cn == 0x00)//英文
    {
        //英文和中文字库上下边界不对,可在此处调整。需要注意tempBuff防止溢出
            for(byteCount=0;byteCount<in_heig*in_width/8;byteCount++)    
            {
                for(bitCount=0;bitCount<8;bitCount++)
                    {                        
                        //把源字模数据由位映射到字节
                        //in_ptr里bitX为1,则pts里整个字节值为1
                        //in_ptr里bitX为0,则pts里整个字节值为0
                        *pts++ = (in_ptr[byteCount] & (0x80>>bitCount))?1:0; 
                    }
            }                
    }
    else //中文
    {            
            for(byteCount=0;byteCount<in_heig*in_width/8;byteCount++)    
            {
                for(bitCount=0;bitCount<8;bitCount++)
                    {                        
                        //把源字模数据由位映射到字节
                        //in_ptr里bitX为1,则pts里整个字节值为1
                        //in_ptr里bitX为0,则pts里整个字节值为0
                        *pts++ = (in_ptr[byteCount] & (0x80>>bitCount))?1:0; 
                    }
            }        
    }

    //zoom过程
    pts = (uint8_t*)&zoomTempBuff;    //映射后的源数据指针
    ots = (uint8_t*)&zoomBuff;    //输出数据的指针
    for (y=0;y<out_heig;y++)    /*行遍历*/
    {
                unsigned int srcx_16=0;
        pSrcLine=pts+in_width*(srcy_16>>16);                
        for (x=0;x<out_width;x++) /*行内像素遍历*/
        {
            ots[x]=pSrcLine[srcx_16>>16]; //把源字模数据复制到目标指针中
            srcx_16+=xrIntFloat_16;            //按比例偏移源像素点
        }
        srcy_16+=yrIntFloat_16;                  //按比例偏移源像素点
        ots+=out_width;                        
    }
    /*!!!缩放后的字模数据直接存储到全局指针zoomBuff里了*/
    out_ptr = (uint8_t*)&zoomBuff;    //out_ptr没有正确传出,后面调用直接改成了全局变量指针!
    
    /*实际中如果使用out_ptr不需要下面这一句!!!
        只是因为out_ptr没有使用,会导致warning。强迫症*/
    out_ptr++; 
}            


/**
 * @brief  利用缩放后的字模显示字符
 * @param  Xpos :字符显示位置x
 * @param  Ypos :字符显示位置y
 * @param  Font_width :字符宽度
 * @param  Font_Heig:字符高度
 * @param  c :要显示的字模数据
 * @param  DrawModel :是否反色显示 
 * @retval 无
 */
void ILI9341_DrawChar_Ex(uint16_t usX, //字符显示位置x
                                                uint16_t usY, //字符显示位置y
                                                uint16_t Font_width, //字符宽度
                                                uint16_t Font_Height,  //字符高度 
                                                uint8_t *c,                        //字模数据
                                                uint16_t DrawModel)        //是否反色显示
{
  uint32_t index = 0, counter = 0;

    //设置显示窗口
    ILI9341_OpenWindow ( usX, usY, Font_width, Font_Height);
    
    ILI9341_Write_Cmd ( CMD_SetPixel );        
    
    //按字节读取字模数据
    //由于前面直接设置了显示窗口,显示数据会自动换行
    for ( index = 0; index < Font_Height; index++ )
    {
            //一位一位处理要显示的颜色
            for ( counter = 0; counter < Font_width; counter++ )
            {
                    //缩放后的字模数据,以一个字节表示一个像素位
                    //整个字节值为1表示该像素为笔迹
                    //整个字节值为0表示该像素为背景
                    if ( *c++ == DrawModel )
                        ILI9341_Write_Data ( CurrentBackColor );            
                    else
                        ILI9341_Write_Data ( CurrentTextColor );
            }    
    }    
}


/**
 * @brief  利用缩放后的字模显示字符串
 * @param  Xpos :字符显示位置x
 * @param  Ypos :字符显示位置y
 * @param  Font_width :字符宽度,英文字符在此基础上/2。注意为偶数
 * @param  Font_Heig:字符高度,注意为偶数
 * @param  c :要显示的字符串
 * @param  DrawModel :是否反色显示 
 * @retval 无
 */
void ILI9341_DisplayStringEx(uint16_t x,         //字符显示位置x
                                                         uint16_t y,                 //字符显示位置y
                                                         uint16_t Font_width,    //要显示的字体宽度,英文字符在此基础上/2。注意为偶数
                                                         uint16_t Font_Height,    //要显示的字体高度,注意为偶数
                                                         uint8_t *ptr,                    //显示的字符内容
                                                         uint16_t DrawModel)  //是否反色显示



{
    uint16_t Charwidth = Font_width; //默认为Font_width,英文宽度为中文宽度的一半
    uint8_t *psr;
    uint8_t Ascii;    //英文
    uint16_t usCh;  //中文
    uint8_t ucBuffer [ WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8 ];    
    
    while ( *ptr != '\0')
    {
            /****处理换行*****/
            if ( ( x - ILI9341_DispWindow_X_Star + Charwidth ) > LCD_X_LENGTH )
            {
                x = ILI9341_DispWindow_X_Star;
                y += Font_Height;
            }
            
            if ( ( y - ILI9341_DispWindow_Y_Star + Font_Height ) > LCD_Y_LENGTH )
            {
                x = ILI9341_DispWindow_X_Star;
                y = ILI9341_DispWindow_Y_Star;
            }    
            
        if(*ptr > 0x80) //如果是中文
        {            
            Charwidth = Font_width;
            usCh = * ( uint16_t * ) ptr;                
            usCh = ( usCh << 8 ) + ( usCh >> 8 );
            GetGBKCode ( ucBuffer, usCh );    //取字模数据
            //缩放字模数据,源字模为16*16
            ILI9341_zoomChar(WIDTH_CH_CHAR,HEIGHT_CH_CHAR,Charwidth,Font_Height,(uint8_t *)&ucBuffer,psr,1); 
            //显示单个字符
            ILI9341_DrawChar_Ex(x,y,Charwidth,Font_Height,(uint8_t*)&zoomBuff,DrawModel);
            x+=Charwidth;
            ptr+=2;
        }
        else
        {
                Charwidth = Font_width / 2;
                Ascii = *ptr - 32;
                //使用16*24字体缩放字模数据
                ILI9341_zoomChar(16,24,Charwidth,Font_Height,(uint8_t *)&Font16x24.table[Ascii * Font16x24.Height*Font16x24.Width/8],psr,0);
              //显示单个字符
                ILI9341_DrawChar_Ex(x,y,Charwidth,Font_Height,(uint8_t*)&zoomBuff,DrawModel);
                x+=Charwidth;
                ptr++;
        }
    }
}


/**
 * @brief  利用缩放后的字模显示字符串(沿Y轴方向)
 * @param  Xpos :字符显示位置x
 * @param  Ypos :字符显示位置y
 * @param  Font_width :字符宽度,英文字符在此基础上/2。注意为偶数
 * @param  Font_Heig:字符高度,注意为偶数
 * @param  c :要显示的字符串
 * @param  DrawModel :是否反色显示 
 * @retval 无
 */
void ILI9341_DisplayStringEx_YDir(uint16_t x,         //字符显示位置x
                                                                         uint16_t y,                 //字符显示位置y
                                                                         uint16_t Font_width,    //要显示的字体宽度,英文字符在此基础上/2。注意为偶数
                                                                         uint16_t Font_Height,    //要显示的字体高度,注意为偶数
                                                                         uint8_t *ptr,                    //显示的字符内容
                                                                         uint16_t DrawModel)  //是否反色显示
{
    uint16_t Charwidth = Font_width; //默认为Font_width,英文宽度为中文宽度的一半
    uint8_t *psr;
    uint8_t Ascii;    //英文
    uint16_t usCh;  //中文
    uint8_t ucBuffer [ WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8 ];    
    
    while ( *ptr != '\0')
    {            
            //统一使用汉字的宽高来计算换行
            if ( ( y - ILI9341_DispWindow_X_Star + Font_width ) > LCD_X_LENGTH )
            {
                y = ILI9341_DispWindow_X_Star;
                x += Font_width;
            }
            
            if ( ( x - ILI9341_DispWindow_Y_Star + Font_Height ) > LCD_Y_LENGTH )
            {
                y = ILI9341_DispWindow_X_Star;
                x = ILI9341_DispWindow_Y_Star;
            }    
            
        if(*ptr > 0x80) //如果是中文
        {            
            Charwidth = Font_width;
            usCh = * ( uint16_t * ) ptr;                
            usCh = ( usCh << 8 ) + ( usCh >> 8 );
            GetGBKCode ( ucBuffer, usCh );    //取字模数据
            //缩放字模数据,源字模为16*16
            ILI9341_zoomChar(WIDTH_CH_CHAR,HEIGHT_CH_CHAR,Charwidth,Font_Height,(uint8_t *)&ucBuffer,psr,1); 
            //显示单个字符
            ILI9341_DrawChar_Ex(x,y,Charwidth,Font_Height,(uint8_t*)&zoomBuff,DrawModel);
            y+=Font_Height;
            ptr+=2;
        }
        else
        {
                Charwidth = Font_width / 2;
                Ascii = *ptr - 32;
                //使用16*24字体缩放字模数据
                ILI9341_zoomChar(16,24,Charwidth,Font_Height,(uint8_t *)&Font16x24.table[Ascii * Font16x24.Height*Font16x24.Width/8],psr,0);
              //显示单个字符
                ILI9341_DrawChar_Ex(x,y,Charwidth,Font_Height,(uint8_t*)&zoomBuff,DrawModel);
                y+=Font_Height;
                ptr++;
        }
    }
}


/**
  * @brief  设置英文字体类型
  * @param  fonts: 指定要选择的字体
    *        参数为以下值之一
  *     @arg:Font24x32;
  *     @arg:Font16x24;
  *     @arg:Font8x16;
  * @retval None
  */
void LCD_SetFont(sFONT *fonts)
{
  LCD_Currentfonts = fonts;
}

/**
  * @brief  获取当前字体类型
  * @param  None.
  * @retval 返回当前字体类型
  */
sFONT *LCD_GetFont(void)
{
  return LCD_Currentfonts;
}


/**
  * @brief  设置LCD的前景(字体)及背景颜色,RGB565
  * @param  TextColor: 指定前景(字体)颜色
  * @param  BackColor: 指定背景颜色
  * @retval None
  */
void LCD_SetColors(uint16_t TextColor, uint16_t BackColor) 
{
  CurrentTextColor = TextColor; 
  CurrentBackColor = BackColor;
}

/**
  * @brief  获取LCD的前景(字体)及背景颜色,RGB565
  * @param  TextColor: 用来存储前景(字体)颜色的指针变量
  * @param  BackColor: 用来存储背景颜色的指针变量
  * @retval None
  */
void LCD_GetColors(uint16_t *TextColor, uint16_t *BackColor)
{
  *TextColor = CurrentTextColor;
  *BackColor = CurrentBackColor;
}

/**
  * @brief  设置LCD的前景(字体)颜色,RGB565
  * @param  Color: 指定前景(字体)颜色 
  * @retval None
  */
void LCD_SetTextColor(uint16_t Color)
{
  CurrentTextColor = Color;
}

/**
  * @brief  设置LCD的背景颜色,RGB565
  * @param  Color: 指定背景颜色 
  * @retval None
  */
void LCD_SetBackColor(uint16_t Color)
{
  CurrentBackColor = Color;
}

/**
  * @brief  清除某行文字
  * @param  Line: 指定要删除的行
  *   本参数可使用宏LINE(0)、LINE(1)等方式指定要删除的行,
  *   宏LINE(x)会根据当前选择的字体来计算Y坐标值,并删除当前字体高度的第x行。
  * @retval None
  */
void LCD_ClearLine(uint16_t Line)
{
  ILI9341_Clear(0,Line,LCD_X_LENGTH,((sFONT *)LCD_GetFont())->Height);    /* 清屏,显示全黑 */

}
/*********************end of file*************************/



fonts.h

#ifndef __FONT_H
#define __FONT_H       

#include "stm32f10x.h"
#include "./font/fonts.h"



/** @defgroup FONTS_Exported_Types
  * @{
  */ 
typedef struct _tFont
{    
  const uint8_t *table;
  uint16_t Width;
  uint16_t Height;
  
} sFONT;

extern sFONT Font24x32;
extern sFONT Font16x24;
extern sFONT Font8x16;

/*******************中文********** 在显示屏上显示的字符大小 ***************************/
#define      WIDTH_CH_CHAR                        16        //中文字符宽度 
#define      HEIGHT_CH_CHAR                          16          //中文字符高度 

/* 如果另外制作使用比如32*32字模 需在 ILI9341_DispChar_CH 函数内需改取字节数据过程为对应字节个数:

    //取出4个字节的数据,在lcd上即是一个汉字的一行
        usTemp = ucBuffer [ rowCount * 4 ];
        usTemp = ( usTemp << 8 );
        usTemp |= ucBuffer [ rowCount * 4 + 1 ];
        usTemp = ( usTemp << 8 );
        usTemp |= ucBuffer [ rowCount * 4 + 2 ];
        usTemp = ( usTemp << 8 );
        usTemp |= ucBuffer [ rowCount * 4 + 3 ];

*/

#define LINE(x) ((x) * (((sFONT *)LCD_GetFont())->Height))

//LINEY统一使用汉字字模的高度
#define LINEY(x) ((x) * (WIDTH_CH_CHAR))




//0表示使用SD卡字模,非零表示FLASH字模,由于SD卡字模有文件系统,速度慢很多。

#define GBKCODE_FLASH                         1

#if GBKCODE_FLASH
    /*使用FLASH字模*/
    /*中文字库存储在FLASH的起始地址*/
    /*FLASH*/
    #define GBKCODE_START_ADDRESS   387*4096


    /*获取字库的函数*/
    //定义获取中文字符字模数组的函数名,ucBuffer为存放字模数组名,usChar为中文字符(国标码)
    #define      GetGBKCode( ucBuffer, usChar )  GetGBKCode_from_EXFlash( ucBuffer, usChar )  
    int GetGBKCode_from_EXFlash( uint8_t * pBuffer, uint16_t c);

#else
    /*使用SD字模*/


    /*SD卡字模路径*/
    #define GBKCODE_FILE_NAME            "0:/Font/GB2312_H1616.FON"


    /*获取字库的函数*/
    //定义获取中文字符字模数组的函数名,ucBuffer为存放字模数组名,usChar为中文字符(国标码)

    #define GetGBKCode( ucBuffer, usChar )  GetGBKCode_from_sd( ucBuffer, usChar )
    int GetGBKCode_from_sd ( uint8_t * pBuffer, uint16_t c);

#endif



#endif /*end of __FONT_H    */

fonts.c


/**
  ******************************************************************************
  * @file    bsp_ili9341_lcd.c
  * @version V1.0
  * @date    2013-xx-xx
  * @brief   液晶屏字模相关
    *                    -支持中英文,需要使用SPI FLASH字模
    *                    -若要使用SD卡文件系统的字模需要添加SD文件系统驱动,并配置宏:GBKCODE_FLASH
    *                      可参考“液晶显示英文(字库在SD卡)工程”
  ******************************************************************************
  * @attention
  *
  * 实验平台:野火 F103-指南者 STM32 开发板 
  * 论坛    :http://www.firebbs.cn
  * 淘宝    :https://fire-stm32.taobao.com
  *
  ******************************************************************************
  */ 
#include "./font/fonts.h"

#if GBKCODE_FLASH

#include "./flash/bsp_spi_flash.h"

#else

#include "./ff.h"

#endif

/***********************英文字模******************************/
/*
 * 常用ASCII表,偏移量32,大小:16(高度)* 8 (宽度)
 */
const uint8_t ASCII8x16_Table [ ] = {       //@conslons字体,阴码点阵格式,逐行顺向取摸
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x08,0x00,0x08,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x34,0x24,0x24,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x16,0x24,0x7f,0x24,0x24,0x24,0x7e,0x24,0x24,0x00,0x00,0x00,
0x00,0x00,0x00,0x08,0x3e,0x68,0x48,0x68,0x1c,0x16,0x12,0x12,0x7c,0x10,0x10,0x00,
0x00,0x00,0x00,0x61,0xd2,0x96,0x74,0x08,0x10,0x16,0x29,0x49,0xc6,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x64,0x64,0x38,0x72,0x4a,0xce,0x46,0x7f,0x00,0x00,0x00,
0x00,0x00,0x00,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x04,0x08,0x18,0x10,0x30,0x30,0x30,0x30,0x10,0x10,0x18,0x0c,0x04,
0x00,0x00,0x00,0x20,0x10,0x08,0x08,0x0c,0x04,0x04,0x04,0x0c,0x08,0x18,0x10,0x20,
0x00,0x00,0x00,0x08,0x0a,0x34,0x1c,0x6a,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x7f,0x18,0x18,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x08,0x30,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x02,0x06,0x04,0x0c,0x08,0x08,0x10,0x10,0x20,0x20,0x40,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x66,0x42,0x47,0x5b,0x73,0x42,0x66,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x18,0x78,0x48,0x08,0x08,0x08,0x08,0x08,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x46,0x06,0x06,0x04,0x08,0x10,0x20,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7c,0x06,0x06,0x04,0x3c,0x02,0x02,0x06,0x7c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x0c,0x1c,0x14,0x24,0x64,0x44,0xff,0x04,0x04,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7e,0x60,0x60,0x60,0x7e,0x02,0x02,0x06,0x7c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x1e,0x30,0x60,0x48,0x76,0x42,0x42,0x62,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7e,0x02,0x06,0x04,0x0c,0x08,0x18,0x10,0x30,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x62,0x42,0x36,0x1c,0x66,0x42,0x42,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x66,0x42,0x42,0x66,0x1a,0x02,0x04,0x78,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x08,0x30,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x18,0x30,0x60,0x10,0x0c,0x06,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7e,0x00,0x7e,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x18,0x04,0x06,0x0c,0x10,0x20,0x00,0x00,0x00,
0x00,0x00,0x00,0x30,0x1c,0x06,0x06,0x06,0x18,0x10,0x00,0x10,0x10,0x00,0x00,0x00,
0x00,0x00,0x00,0x1c,0x22,0x41,0x41,0xdd,0xb5,0xa5,0xa5,0xaf,0x94,0xc0,0x40,0x3c,
0x00,0x00,0x00,0x00,0x18,0x1c,0x34,0x24,0x26,0x62,0x7e,0x43,0xc1,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7c,0x46,0x42,0x46,0x7c,0x42,0x42,0x42,0x7c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x1e,0x20,0x40,0x40,0x40,0x40,0x40,0x60,0x3e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7c,0x46,0x42,0x43,0x43,0x43,0x42,0x46,0x78,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7e,0x60,0x60,0x60,0x7e,0x60,0x60,0x60,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7e,0x60,0x60,0x60,0x7e,0x60,0x60,0x60,0x60,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x1e,0x60,0x40,0x40,0xce,0x42,0x42,0x62,0x3e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x42,0x42,0x42,0x42,0x7e,0x42,0x42,0x42,0x42,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7e,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7c,0x04,0x04,0x04,0x04,0x04,0x04,0x44,0x78,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x42,0x44,0x48,0x50,0x70,0x58,0x4c,0x44,0x42,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x3e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x62,0x66,0x67,0x5f,0x5b,0x5b,0xc1,0xc1,0xc1,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x62,0x62,0x72,0x52,0x5a,0x4a,0x4e,0x46,0x46,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x62,0x43,0xc3,0xc3,0xc3,0x43,0x62,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7c,0x46,0x42,0x42,0x46,0x78,0x40,0x40,0x40,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x62,0x43,0xc3,0xc3,0xc3,0x43,0x62,0x3c,0x18,0x0f,0x00,
0x00,0x00,0x00,0x00,0x7c,0x66,0x62,0x66,0x7c,0x6c,0x64,0x66,0x62,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3e,0x60,0x40,0x60,0x1c,0x06,0x02,0x02,0x7c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7f,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x62,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xc1,0x43,0x42,0x62,0x26,0x24,0x34,0x1c,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xc1,0xc1,0x41,0x49,0x5b,0x5b,0x76,0x66,0x66,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x43,0x66,0x34,0x18,0x18,0x1c,0x24,0x66,0xc3,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xc1,0x42,0x66,0x34,0x1c,0x18,0x18,0x18,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7e,0x02,0x04,0x0c,0x18,0x10,0x20,0x60,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x1c,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1c,
0x00,0x00,0x00,0x40,0x20,0x20,0x10,0x10,0x08,0x08,0x0c,0x04,0x06,0x02,0x00,0x00,
0x00,0x00,0x00,0x3c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x3c,
0x00,0x00,0x00,0x00,0x18,0x1c,0x24,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,
0x00,0x00,0x00,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x06,0x02,0x3e,0x42,0x46,0x7a,0x00,0x00,0x00,
0x00,0x00,0x00,0x40,0x40,0x40,0x5c,0x62,0x42,0x42,0x42,0x42,0x7c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x1e,0x20,0x60,0x40,0x60,0x20,0x3e,0x00,0x00,0x00,
0x00,0x00,0x00,0x02,0x02,0x02,0x3e,0x62,0x42,0x42,0x42,0x66,0x3a,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x62,0x42,0x7e,0x40,0x60,0x3e,0x00,0x00,0x00,
0x00,0x00,0x00,0x0f,0x18,0x10,0x10,0x7e,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0x66,0x42,0x66,0x58,0x40,0x3e,0x43,0x42,0x3c,
0x00,0x00,0x00,0x40,0x40,0x40,0x5c,0x62,0x42,0x42,0x42,0x42,0x42,0x00,0x00,0x00,
0x00,0x00,0x00,0x18,0x18,0x00,0x78,0x08,0x08,0x08,0x08,0x08,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x04,0x0c,0x00,0x7c,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x0c,0x78,
0x00,0x00,0x00,0x60,0x60,0x60,0x62,0x6c,0x78,0x70,0x68,0x64,0x62,0x00,0x00,0x00,
0x00,0x00,0x00,0x78,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x76,0x4b,0x4b,0x4b,0x4b,0x4b,0x4b,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x5c,0x62,0x42,0x42,0x42,0x42,0x42,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x62,0x42,0x43,0x42,0x62,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x5c,0x62,0x42,0x42,0x42,0x42,0x7c,0x40,0x40,0x40,
0x00,0x00,0x00,0x00,0x00,0x00,0x3e,0x62,0x42,0x42,0x42,0x66,0x3a,0x02,0x02,0x02,
0x00,0x00,0x00,0x00,0x00,0x00,0x6e,0x72,0x63,0x60,0x60,0x60,0x60,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3e,0x20,0x20,0x3c,0x06,0x02,0x7c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x10,0x10,0xfe,0x10,0x10,0x10,0x10,0x10,0x1e,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x42,0x42,0x42,0x42,0x42,0x66,0x3a,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x43,0x42,0x66,0x24,0x34,0x18,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xc1,0xc1,0x5b,0x5a,0x5e,0x66,0x66,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x62,0x26,0x1c,0x18,0x1c,0x26,0x62,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x43,0x42,0x66,0x24,0x34,0x1c,0x18,0x18,0x30,0xe0,
0x00,0x00,0x00,0x00,0x00,0x00,0x7e,0x06,0x0c,0x18,0x10,0x20,0x7e,0x00,0x00,0x00,
0x00,0x00,0x00,0x0e,0x18,0x10,0x10,0x10,0x30,0x70,0x10,0x10,0x10,0x10,0x18,0x0e,
0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
0x00,0x00,0x00,0x30,0x18,0x08,0x08,0x08,0x0c,0x0e,0x08,0x08,0x08,0x08,0x18,0x30,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x71,0x4b,0x06,0x00,0x00,0x00,0x00,0x00,
};  

/*
 * 常用ASCII表,偏移量32,大小:24(高度)* 16 (宽度)
 */
const uint8_t ASCII16x24_Table [ ] = {       //@conslons字体,阴码点阵格式,逐行顺向取摸
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x01,0x80,0x01,0x80,
0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x00,0x00,
0x00,0x00,0x03,0xc0,0x03,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0e,0x70,0x0e,0x70,0x0e,0x70,
0x0c,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x18,0x06,0x38,
0x06,0x30,0x7f,0xfe,0x0c,0x30,0x0c,0x30,0x0c,0x30,0x0c,0x30,0x7f,0xfe,0x0c,0x60,
0x1c,0x60,0x18,0x60,0x18,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xc0,0x00,0xc0,0x0f,0xf8,0x3c,0xc8,
0x31,0xc0,0x31,0x80,0x3d,0x80,0x1f,0x80,0x03,0xf0,0x01,0xf8,0x03,0x1c,0x03,0x0c,
0x03,0x1c,0x3f,0xf8,0x3f,0xe0,0x07,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1c,0x00,0x7e,0x0e,0x63,0x0c,0x63,0x18,
0x63,0x30,0x7e,0x60,0x00,0xc0,0x01,0x80,0x03,0x00,0x07,0x7c,0x0e,0xe6,0x1c,0xc6,
0x18,0xc6,0x30,0xc6,0x60,0x7c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xe0,0x1c,0xf0,0x38,0x70,
0x38,0x70,0x1c,0x60,0x1f,0xc0,0x0f,0x00,0x3f,0x8c,0x71,0xcc,0x60,0xec,0x60,0x7c,
0x70,0x38,0x3c,0xfc,0x1f,0xce,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xc0,0x01,0x80,0x01,0x80,
0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0xe0,0x01,0xc0,0x01,0x80,
0x03,0x00,0x07,0x00,0x06,0x00,0x06,0x00,0x0e,0x00,0x0e,0x00,0x0e,0x00,0x0e,0x00,
0x06,0x00,0x07,0x00,0x03,0x00,0x03,0x80,0x01,0xc0,0x00,0xe0,0x00,0x30,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0c,0x00,0x06,0x00,0x03,0x80,0x01,0x80,
0x01,0xc0,0x00,0xe0,0x00,0x60,0x00,0x60,0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x60,
0x00,0x60,0x00,0xe0,0x00,0xc0,0x01,0x80,0x03,0x80,0x06,0x00,0x0c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x11,0x88,0x1d,0xb8,
0x03,0xc0,0x07,0xe0,0x3d,0xbc,0x01,0x88,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x7f,0xfe,0x01,0x80,0x01,0x80,
0x01,0x80,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x03,0xc0,0x03,0xc0,0x01,0xc0,0x01,0xc0,0x03,0x80,0x1f,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xf0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x03,0xc0,0x03,0xc0,0x03,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x38,0x00,0x30,
0x00,0x60,0x00,0xe0,0x00,0xc0,0x01,0xc0,0x01,0x80,0x03,0x00,0x03,0x00,0x06,0x00,
0x0e,0x00,0x0c,0x00,0x1c,0x00,0x18,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x0f,0xf0,0x1c,0x38,
0x38,0x1c,0x30,0x1c,0x70,0x7e,0x70,0xee,0x73,0x8e,0x7e,0x0e,0x7c,0x0c,0x30,0x0c,
0x38,0x1c,0x1e,0x78,0x0f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xc0,0x1f,0xc0,
0x39,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,
0x01,0xc0,0x3f,0xfc,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x1f,0xf0,0x18,0x38,
0x00,0x38,0x00,0x18,0x00,0x38,0x00,0x38,0x00,0x70,0x01,0xe0,0x03,0x80,0x07,0x00,
0x1c,0x00,0x3f,0xfc,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x1f,0xf0,0x00,0x38,
0x00,0x38,0x00,0x38,0x00,0x30,0x07,0xe0,0x07,0xf0,0x00,0x38,0x00,0x1c,0x00,0x1c,
0x00,0x18,0x20,0xf8,0x3f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x01,0xb0,
0x03,0x30,0x07,0x30,0x0e,0x30,0x1c,0x30,0x38,0x30,0x70,0x30,0x7f,0xfe,0x7f,0xfe,
0x00,0x30,0x00,0x30,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xf8,0x18,0x00,
0x18,0x00,0x18,0x00,0x18,0x00,0x1f,0xe0,0x00,0xf8,0x00,0x1c,0x00,0x1c,0x00,0x1c,
0x00,0x38,0x00,0xf0,0x1f,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xf8,0x0f,0x00,
0x1c,0x00,0x18,0x00,0x30,0x00,0x37,0xf8,0x3c,0x3c,0x30,0x0c,0x30,0x0c,0x38,0x0c,
0x38,0x1c,0x1e,0x38,0x0f,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xfc,0x00,0x1c,
0x00,0x18,0x00,0x38,0x00,0x70,0x00,0x60,0x00,0xe0,0x01,0xc0,0x01,0x80,0x03,0x80,
0x07,0x00,0x06,0x00,0x0e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xc0,0x1f,0xf8,0x38,0x1c,
0x38,0x1c,0x38,0x1c,0x1c,0x38,0x0f,0xf0,0x07,0xf0,0x1c,0x78,0x38,0x1c,0x30,0x0c,
0x38,0x1c,0x3c,0x38,0x0f,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x1f,0xf0,0x38,0x38,
0x30,0x1c,0x70,0x1c,0x70,0x0c,0x38,0x0c,0x1f,0xfc,0x0f,0xcc,0x00,0x1c,0x00,0x18,
0x00,0x70,0x1f,0xe0,0x1f,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x03,0xc0,0x03,0xc0,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x03,0xc0,0x03,0xc0,0x03,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x03,0xc0,0x03,0xc0,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x03,0xc0,0x03,0xc0,0x01,0xc0,0x01,0xc0,0x03,0x80,0x0f,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x38,0x00,0xf0,0x01,0xc0,0x07,0x00,0x1e,0x00,0x38,0x00,0x0e,0x00,0x07,0x80,
0x01,0xc0,0x00,0x70,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xfc,0x00,0x00,0x00,0x00,0x3f,0xfc,0x3f,0xfc,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x1c,0x00,0x0f,0x00,0x03,0x80,0x01,0xe0,0x00,0x78,0x00,0x1c,0x00,0x70,0x01,0xe0,
0x03,0x80,0x0e,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xc0,0x00,0xf0,0x00,0x38,
0x00,0x38,0x00,0x38,0x00,0x38,0x03,0xf0,0x03,0x80,0x03,0x00,0x03,0x00,0x00,0x00,
0x00,0x00,0x07,0x80,0x07,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xe0,0x07,0xf8,0x0c,0x0c,0x18,0x06,
0x30,0x06,0x70,0x03,0x63,0xf3,0x66,0x33,0xc6,0x73,0xcc,0x63,0xcc,0x62,0xcc,0x66,
0xcc,0xe6,0xc7,0xfc,0xe0,0x00,0x60,0x00,0x70,0x00,0x38,0x10,0x1f,0xf0,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xc0,0x07,0xe0,
0x06,0xe0,0x0e,0x70,0x0e,0x70,0x0c,0x30,0x1c,0x38,0x18,0x18,0x3f,0xfc,0x3f,0xfc,
0x70,0x0e,0x60,0x0e,0xe0,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xf0,0x38,0x38,
0x38,0x1c,0x38,0x1c,0x38,0x38,0x3f,0xf0,0x3f,0xf8,0x38,0x1c,0x38,0x0c,0x38,0x0c,
0x38,0x1c,0x3f,0xf8,0x3f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xe0,0x07,0xfc,0x1e,0x04,
0x38,0x00,0x38,0x00,0x30,0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x30,0x00,0x38,0x00,
0x3c,0x00,0x1f,0x9c,0x07,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xf0,0x30,0x78,
0x30,0x1c,0x30,0x0c,0x30,0x0e,0x30,0x0e,0x30,0x0e,0x30,0x0e,0x30,0x0e,0x30,0x1c,
0x30,0x38,0x3f,0xf0,0x3f,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xf8,0x18,0x00,
0x18,0x00,0x18,0x00,0x18,0x00,0x1f,0xf8,0x1f,0xf8,0x18,0x00,0x18,0x00,0x18,0x00,
0x18,0x00,0x1f,0xf8,0x1f,0xf8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xf8,0x18,0x00,
0x18,0x00,0x18,0x00,0x18,0x00,0x1f,0xf8,0x1f,0xf8,0x18,0x00,0x18,0x00,0x18,0x00,
0x18,0x00,0x18,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x07,0xfc,0x1e,0x04,
0x38,0x00,0x30,0x00,0x70,0x00,0x70,0x00,0x70,0xfc,0x70,0x0c,0x70,0x0c,0x30,0x0c,
0x38,0x0c,0x1f,0x1c,0x07,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0c,0x30,0x0c,
0x30,0x0c,0x30,0x0c,0x30,0x0c,0x3f,0xfc,0x3f,0xfc,0x30,0x0c,0x30,0x0c,0x30,0x0c,
0x30,0x0c,0x30,0x0c,0x30,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xfc,0x01,0x80,
0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,
0x01,0x80,0x3f,0xfc,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xf0,0x00,0x30,
0x00,0x30,0x00,0x30,0x00,0x30,0x00,0x30,0x00,0x30,0x00,0x30,0x00,0x30,0x00,0x30,
0x00,0x70,0x1d,0xe0,0x1f,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x1c,0x38,0x70,
0x38,0xe0,0x39,0xc0,0x3b,0x80,0x3f,0x00,0x3f,0x00,0x3b,0x80,0x39,0xc0,0x38,0xe0,
0x38,0x70,0x38,0x38,0x38,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1c,0x00,0x1c,0x00,
0x1c,0x00,0x1c,0x00,0x1c,0x00,0x1c,0x00,0x1c,0x00,0x1c,0x00,0x1c,0x00,0x1c,0x00,
0x1c,0x00,0x1f,0xfc,0x1f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x1c,0x7c,0x3c,
0x6c,0x3e,0x6e,0x6e,0x66,0x6e,0x66,0xce,0x63,0xc6,0x63,0x86,0x61,0x86,0x60,0x06,
0x60,0x06,0x60,0x06,0x60,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x0c,0x3c,0x0c,
0x3e,0x0c,0x36,0x0c,0x33,0x0c,0x33,0x8c,0x31,0x8c,0x31,0xcc,0x30,0xec,0x30,0x6c,
0x30,0x7c,0x30,0x3c,0x30,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xc0,0x0f,0xf8,0x1c,0x3c,
0x38,0x1c,0x70,0x0e,0x70,0x0e,0x60,0x06,0x60,0x06,0x70,0x0e,0x70,0x0e,0x70,0x0c,
0x38,0x1c,0x1e,0x78,0x0f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xf0,0x38,0x3c,
0x38,0x1c,0x38,0x0c,0x38,0x0c,0x38,0x1c,0x38,0x78,0x3f,0xe0,0x38,0x00,0x38,0x00,
0x38,0x00,0x38,0x00,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xc0,0x0f,0xf8,0x1c,0x3c,
0x38,0x1c,0x70,0x0e,0x70,0x0e,0x60,0x06,0x60,0x06,0x70,0x0e,0x70,0x0e,0x70,0x0c,
0x38,0x1c,0x1e,0x78,0x0f,0xe0,0x01,0x80,0x01,0xc0,0x00,0xff,0x00,0x3c,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xf0,0x38,0x38,
0x38,0x18,0x38,0x18,0x38,0x38,0x38,0xf0,0x3f,0xc0,0x38,0xe0,0x38,0x70,0x38,0x38,
0x38,0x38,0x38,0x1c,0x38,0x0e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xe0,0x0f,0xf8,0x38,0x00,
0x38,0x00,0x38,0x00,0x3c,0x00,0x1f,0x80,0x03,0xf0,0x00,0x78,0x00,0x1c,0x00,0x1c,
0x00,0x1c,0x38,0x78,0x3f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7f,0xfe,0x01,0x80,
0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,
0x01,0x80,0x01,0x80,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0c,0x30,0x0c,
0x30,0x0c,0x30,0x0c,0x30,0x0c,0x30,0x0c,0x30,0x0c,0x30,0x0c,0x30,0x0c,0x30,0x0c,
0x38,0x1c,0x1c,0x38,0x0f,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xe0,0x06,0x70,0x0e,
0x70,0x0e,0x38,0x1c,0x38,0x1c,0x1c,0x18,0x1c,0x38,0x0c,0x30,0x0e,0x70,0x06,0x60,
0x07,0xe0,0x03,0xc0,0x03,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x06,0x60,0x06,
0x60,0x06,0x60,0x06,0x61,0x86,0x63,0x86,0x73,0xc6,0x73,0xce,0x76,0x6c,0x36,0x6c,
0x3c,0x3c,0x3c,0x3c,0x38,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x1c,0x38,0x18,
0x1c,0x38,0x0e,0x70,0x07,0xe0,0x03,0xc0,0x03,0xc0,0x07,0xe0,0x0e,0x70,0x1c,0x38,
0x18,0x38,0x38,0x1c,0x70,0x0e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x0e,0x70,0x0c,
0x38,0x1c,0x1c,0x38,0x0e,0x70,0x06,0x60,0x07,0xe0,0x03,0xc0,0x01,0x80,0x01,0x80,
0x01,0x80,0x01,0x80,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xfc,0x00,0x1c,
0x00,0x38,0x00,0x70,0x00,0xe0,0x01,0xc0,0x03,0x80,0x07,0x00,0x0e,0x00,0x0c,0x00,
0x18,0x00,0x3f,0xfc,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xf0,0x07,0xf0,0x06,0x00,0x06,0x00,
0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,
0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x07,0xf0,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x1c,0x00,0x0c,0x00,
0x06,0x00,0x07,0x00,0x03,0x00,0x03,0x80,0x01,0x80,0x01,0xc0,0x00,0xc0,0x00,0x60,
0x00,0x70,0x00,0x30,0x00,0x38,0x00,0x18,0x00,0x0c,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xe0,0x0f,0xe0,0x00,0x60,0x00,0x60,
0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,
0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,0x00,0x60,0x0f,0xe0,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xc0,0x06,0xc0,
0x06,0x60,0x0c,0x30,0x18,0x18,0x30,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1e,0x00,0x03,0x80,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x1f,0xf0,0x10,0x38,0x00,0x1c,0x00,0x1c,0x0f,0xfc,0x1c,0x1c,0x38,0x1c,
0x38,0x1c,0x3c,0xfc,0x1f,0xdc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x38,0x00,0x38,0x00,
0x38,0x00,0x3b,0xf8,0x3e,0x1c,0x3c,0x1c,0x38,0x0c,0x38,0x0c,0x38,0x0c,0x38,0x0c,
0x38,0x1c,0x3c,0x78,0x1f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x07,0xf8,0x0e,0x00,0x1c,0x00,0x38,0x00,0x38,0x00,0x38,0x00,0x38,0x00,
0x1c,0x00,0x0f,0x18,0x07,0xf8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1c,0x00,0x1c,0x00,0x1c,
0x00,0x1c,0x0f,0xfc,0x1c,0x1c,0x38,0x1c,0x30,0x1c,0x30,0x1c,0x30,0x1c,0x30,0x1c,
0x38,0x3c,0x1c,0xfc,0x0f,0x9c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0xf0,0x1c,0x38,0x38,0x1c,0x30,0x0c,0x3f,0xfc,0x30,0x00,0x30,0x00,
0x38,0x00,0x1e,0x0c,0x07,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x01,0xfe,0x03,0x80,0x03,0x00,
0x03,0x00,0x03,0x00,0x7f,0xfc,0x7f,0xfc,0x03,0x00,0x03,0x00,0x03,0x00,0x03,0x00,
0x03,0x00,0x03,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0xfe,0x1c,0x38,0x38,0x18,0x38,0x18,0x18,0x38,0x1f,0xf0,0x3b,0x80,
0x30,0x00,0x3f,0xf0,0x1f,0xfc,0x30,0x0e,0x70,0x0e,0x38,0x1c,0x1f,0xf8,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x38,0x00,0x38,0x00,
0x38,0x00,0x3b,0xf8,0x3e,0x38,0x3c,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,
0x38,0x1c,0x38,0x1c,0x38,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x80,0x03,0xc0,0x03,0xc0,0x00,0x00,
0x00,0x00,0x1f,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,
0x01,0xc0,0x01,0xc0,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x70,0x00,0x70,0x00,0x00,
0x00,0x00,0x3f,0xf0,0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x70,
0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x70,0x20,0xe0,0x3f,0xc0,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x18,0x00,0x18,0x00,
0x18,0x00,0x18,0x3c,0x18,0x70,0x18,0xe0,0x1b,0x80,0x1f,0x00,0x1b,0x80,0x19,0xe0,
0x18,0x70,0x18,0x38,0x18,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xc0,0x01,0xc0,0x01,0xc0,
0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,
0x01,0xc0,0x01,0xc0,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x6f,0x3c,0x79,0xee,0x71,0xce,0x71,0x8e,0x71,0x8e,0x71,0x8e,0x71,0x8e,
0x71,0x8e,0x71,0x8e,0x71,0x8e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x3b,0xf8,0x3e,0x38,0x3c,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,
0x38,0x1c,0x38,0x1c,0x38,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0xf0,0x1c,0x3c,0x38,0x1c,0x70,0x0e,0x70,0x0e,0x70,0x0e,0x70,0x0c,
0x38,0x1c,0x1e,0x78,0x0f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x3b,0xf8,0x3e,0x1c,0x3c,0x1c,0x38,0x0c,0x38,0x0c,0x38,0x0c,0x38,0x0c,
0x38,0x1c,0x3c,0x78,0x3f,0xe0,0x38,0x00,0x38,0x00,0x38,0x00,0x38,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0xfc,0x1c,0x1c,0x38,0x1c,0x30,0x1c,0x30,0x1c,0x30,0x1c,0x30,0x1c,
0x38,0x3c,0x1c,0xfc,0x0f,0x9c,0x00,0x1c,0x00,0x1c,0x00,0x1c,0x00,0x1c,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x19,0xf8,0x1f,0x1c,0x1c,0x0c,0x18,0x0e,0x18,0x00,0x18,0x00,0x18,0x00,
0x18,0x00,0x18,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0xf8,0x1c,0x00,0x18,0x00,0x1e,0x00,0x0f,0xc0,0x01,0xf8,0x00,0x18,
0x00,0x18,0x18,0x38,0x1f,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x06,0x00,
0x06,0x00,0x7f,0xfc,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,0x06,0x00,
0x07,0x00,0x07,0x84,0x01,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x38,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,0x38,0x1c,
0x38,0x3c,0x1c,0xfc,0x0f,0xdc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x70,0x0c,0x38,0x1c,0x38,0x18,0x1c,0x38,0x0c,0x30,0x0e,0x70,0x06,0x60,
0x07,0xe0,0x03,0xc0,0x03,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x60,0x06,0x60,0x06,0x61,0x86,0x73,0x8e,0x73,0xcc,0x33,0xcc,0x36,0x6c,
0x36,0x6c,0x3c,0x3c,0x3c,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x38,0x1c,0x1c,0x38,0x0e,0x70,0x07,0xe0,0x03,0xc0,0x03,0xc0,0x07,0xe0,
0x0e,0x70,0x1c,0x38,0x38,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x70,0x0c,0x38,0x1c,0x38,0x18,0x1c,0x38,0x0c,0x30,0x0e,0x70,0x06,0x60,
0x07,0xe0,0x03,0xc0,0x03,0xc0,0x03,0x80,0x07,0x00,0x0e,0x00,0x7c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x1f,0xf8,0x00,0x38,0x00,0x70,0x00,0xe0,0x01,0xc0,0x03,0x80,0x07,0x00,
0x0c,0x00,0x1f,0xfc,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x01,0xf8,0x03,0x80,0x03,0x80,
0x03,0x80,0x03,0x80,0x03,0x80,0x03,0x00,0x3f,0x00,0x3e,0x00,0x03,0x00,0x03,0x80,
0x03,0x80,0x03,0x80,0x03,0x80,0x03,0x80,0x03,0x80,0x01,0xc0,0x00,0xf8,0x00,0x00,
0x00,0x00,0x00,0x00,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,
0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,
0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x01,0x80,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1e,0x00,0x1f,0x80,0x01,0x80,0x01,0xc0,
0x01,0xc0,0x01,0xc0,0x01,0xc0,0x00,0xc0,0x00,0xfc,0x00,0x7c,0x00,0xc0,0x01,0xc0,
0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x01,0xc0,0x03,0x80,0x1f,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x1c,0x00,0x3f,0x06,0x71,0xce,0x60,0xfc,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};

/*
 * 常用ASCII表,偏移量32,大小:32(高度)* 24 (宽度)
 */
const uint8_t ASCII24x32_Table [ ] = {       //@conslons字体,阴码点阵格式,逐行顺向取摸
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,
0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,
0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3c,0x00,0x00,0x7e,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x03,0xc3,0xe0,0x03,0xc3,0xe0,0x03,0xc3,0xc0,0x03,0xc3,0xc0,0x03,0xc3,
0xc0,0x03,0xc3,0xc0,0x03,0xc1,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xe0,0xe0,0x01,0xc0,0xe0,0x01,0xc0,
0xe0,0x01,0xc0,0xe0,0x3f,0xff,0xfe,0x3f,0xff,0xfe,0x03,0xc1,0xc0,0x03,0x81,0xc0,
0x03,0x81,0xc0,0x03,0x81,0xc0,0x7f,0xff,0xfc,0x7f,0xff,0xfc,0x07,0x83,0x80,0x07,
0x03,0x80,0x07,0x03,0x80,0x07,0x03,0x80,0x07,0x07,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x07,0x00,0x00,0x0f,0x00,0x00,0x0e,0x00,0x01,0xff,0xf0,0x07,0xff,0xf0,0x1f,0x0e,
0x00,0x1e,0x1e,0x00,0x1e,0x1c,0x00,0x1e,0x1c,0x00,0x0f,0xdc,0x00,0x07,0xfc,0x00,
0x00,0xff,0x80,0x00,0x3f,0xf0,0x00,0x38,0xf8,0x00,0x38,0x78,0x00,0x78,0x3c,0x00,
0x70,0x78,0x30,0x71,0xf8,0x3f,0xff,0xe0,0x1f,0xff,0x00,0x00,0xe0,0x00,0x00,0xe0,
0x00,0x00,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0x80,0x0f,0x3f,0xe0,0x1e,0x78,0x70,0x3c,0x70,0x70,0x70,0x70,0x70,
0xe0,0x70,0x71,0xc0,0x3f,0xe3,0x80,0x1f,0xc7,0x00,0x00,0x0e,0x00,0x00,0x1c,0x00,
0x00,0x78,0x00,0x00,0xf0,0xf0,0x01,0xe7,0xfc,0x03,0xcf,0x0e,0x07,0x8e,0x0e,0x0f,
0x0e,0x0e,0x1e,0x0e,0x0e,0x3c,0x07,0xbc,0x70,0x03,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x01,0xff,0x00,0x07,0xff,0x80,0x0f,0x03,0xc0,0x0f,0x03,
0xc0,0x0f,0x03,0xc0,0x0f,0x07,0x80,0x07,0x9f,0x00,0x03,0xfe,0x00,0x03,0xf0,0x00,
0x0f,0xf8,0x3c,0x3e,0x7c,0x3c,0x3c,0x1f,0x3c,0x78,0x0f,0xf8,0x78,0x07,0xf8,0x7c,
0x01,0xf0,0x3e,0x03,0xf8,0x1f,0xff,0xfc,0x07,0xfe,0x1f,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3e,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,
0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x80,0x00,0x01,0xc0,0x00,0x07,0x80,0x00,0x0f,0x00,0x00,0x1e,0x00,0x00,0x3c,
0x00,0x00,0x78,0x00,0x00,0xf0,0x00,0x00,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,
0x01,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x01,0xc0,0x00,0x01,0xe0,0x00,0x01,
0xe0,0x00,0x00,0xf0,0x00,0x00,0xf0,0x00,0x00,0x78,0x00,0x00,0x3c,0x00,0x00,0x1e,
0x00,0x00,0x0f,0x00,0x00,0x07,0xc0,0x00,0x01,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x03,0xc0,0x00,0x01,0xe0,0x00,0x00,0xf0,0x00,0x00,0x7c,0x00,0x00,0x3e,
0x00,0x00,0x1e,0x00,0x00,0x0f,0x00,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x03,0x80,
0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0x80,0x00,
0x07,0x80,0x00,0x07,0x80,0x00,0x0f,0x00,0x00,0x1e,0x00,0x00,0x3c,0x00,0x00,0x78,
0x00,0x00,0xf0,0x00,0x01,0xe0,0x00,0x03,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1c,0x00,0x00,0x1c,0x00,0x00,0x18,0x00,0x0f,0x18,0xf0,0x07,0xdb,
0xe0,0x00,0x7f,0x00,0x00,0xff,0x00,0x07,0xdb,0xe0,0x0e,0x18,0x70,0x00,0x18,0x00,
0x00,0x1c,0x00,0x00,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,
0x00,0x3c,0x00,0x3f,0xff,0xfc,0x3f,0xff,0xfc,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,
0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x7c,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x3e,0x00,0x00,0x1e,0x00,0x00,0x3c,
0x00,0x00,0xf8,0x00,0x07,0xe0,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x03,0xff,0xe0,0x03,0xff,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x7c,0x00,0x00,0xfe,0x00,0x00,0xfe,0x00,0x00,0x7e,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x78,0x00,0x00,0xf0,0x00,0x00,0xe0,0x00,0x01,0xe0,0x00,0x03,
0xc0,0x00,0x03,0x80,0x00,0x07,0x80,0x00,0x0f,0x00,0x00,0x0e,0x00,0x00,0x1e,0x00,
0x00,0x3c,0x00,0x00,0x38,0x00,0x00,0x70,0x00,0x00,0xf0,0x00,0x00,0xe0,0x00,0x01,
0xc0,0x00,0x03,0xc0,0x00,0x07,0x80,0x00,0x07,0x00,0x00,0x0f,0x00,0x00,0x1e,0x00,
0x00,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xff,0xc0,0x07,0xff,0xe0,0x0f,0x00,
0xf0,0x1e,0x00,0x78,0x1e,0x00,0x3c,0x3c,0x00,0xfc,0x3c,0x07,0xfc,0x3c,0x1f,0xbc,
0x3c,0x7c,0x1c,0x3d,0xf0,0x3c,0x3f,0xc0,0x3c,0x3f,0x00,0x3c,0x1e,0x00,0x38,0x1e,
0x00,0x78,0x0f,0x80,0xf0,0x07,0xff,0xe0,0x01,0xff,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7e,0x00,0x03,0xfe,0x00,0x1f,0xde,
0x00,0x0e,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,
0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,
0x1e,0x00,0x00,0x1e,0x00,0x0f,0xff,0xf8,0x0f,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xff,0x80,0x0f,0xff,0xe0,0x0e,0x01,
0xf0,0x00,0x00,0xf0,0x00,0x00,0xf0,0x00,0x00,0xf0,0x00,0x00,0xf0,0x00,0x01,0xe0,
0x00,0x03,0xc0,0x00,0x0f,0x80,0x00,0x3e,0x00,0x00,0x7c,0x00,0x01,0xf0,0x00,0x03,
0xc0,0x00,0x0f,0x80,0x00,0x1f,0xff,0xfc,0x1f,0xff,0xfc,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,0x80,0x0f,0xff,0xe0,0x00,0x01,
0xe0,0x00,0x00,0xf0,0x00,0x00,0xf0,0x00,0x01,0xe0,0x00,0x03,0xc0,0x01,0xff,0x00,
0x01,0xff,0xc0,0x00,0x03,0xf0,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,
0x00,0x78,0x00,0x01,0xf0,0x0f,0xff,0xc0,0x0f,0xff,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xc0,0x00,0x1f,0xc0,0x00,0x3f,
0xc0,0x00,0x7b,0xc0,0x00,0xf3,0xc0,0x01,0xe3,0xc0,0x03,0xc3,0xc0,0x07,0x83,0xc0,
0x0f,0x03,0xc0,0x1c,0x03,0xc0,0x38,0x03,0xc0,0x7f,0xff,0xfe,0x7f,0xff,0xfe,0x00,
0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,0xe0,0x0f,0xff,0xe0,0x0f,0x00,
0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0xff,0x80,
0x0f,0xff,0xe0,0x00,0x00,0xf0,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,
0x00,0xf0,0x00,0x03,0xe0,0x0f,0xff,0xc0,0x0f,0xfe,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xf0,0x01,0xff,0xf0,0x03,0xe0,
0x00,0x07,0x80,0x00,0x0f,0x00,0x00,0x1e,0x00,0x00,0x1e,0x1f,0x00,0x1f,0xff,0xe0,
0x1f,0xc1,0xf8,0x1e,0x00,0x78,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x0f,
0x00,0x78,0x0f,0x80,0xf8,0x07,0xff,0xe0,0x01,0xff,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,0xfc,0x1f,0xff,0xfc,0x00,0x00,
0x78,0x00,0x00,0xf0,0x00,0x00,0xe0,0x00,0x01,0xe0,0x00,0x03,0xc0,0x00,0x07,0x80,
0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x1e,0x00,0x00,0x3c,0x00,0x00,0x78,0x00,0x00,
0xf0,0x00,0x01,0xf0,0x00,0x01,0xe0,0x00,0x03,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xff,0xe0,0x0f,0xe3,0xf0,0x0f,0x00,
0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x0f,0x00,0xf0,0x07,0xe3,0xe0,0x01,0xff,0x80,
0x01,0xff,0x80,0x07,0xe7,0xe0,0x0f,0x00,0xf8,0x1e,0x00,0x78,0x1e,0x00,0x3c,0x1e,
0x00,0x7c,0x1f,0x00,0xf8,0x0f,0xff,0xf0,0x03,0xff,0xc0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xff,0x80,0x0f,0xc7,0xe0,0x1e,0x00,
0xf0,0x1e,0x00,0x78,0x3c,0x00,0x78,0x3c,0x00,0x78,0x3c,0x00,0x38,0x1e,0x00,0x78,
0x0f,0xef,0xf8,0x07,0xff,0xb8,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0xf0,0x00,
0x01,0xe0,0x00,0x0f,0xc0,0x0f,0xff,0x00,0x0f,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x18,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x3c,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x3e,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x18,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x3e,0x00,0x00,0x7e,0x00,0x00,0x7f,0x00,0x00,0x1f,0x00,0x00,0x1e,0x00,0x00,0x1e,
0x00,0x00,0xfc,0x00,0x07,0xf0,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x40,0x00,0x01,0xe0,0x00,0x07,0xc0,0x00,0x1f,0x00,0x00,0x7e,0x00,0x01,0xf8,0x00,
0x03,0xe0,0x00,0x0f,0x80,0x00,0x0f,0x80,0x00,0x03,0xe0,0x00,0x00,0xf8,0x00,0x00,
0x3e,0x00,0x00,0x0f,0x80,0x00,0x03,0xe0,0x00,0x00,0xe0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,0xf8,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,0xf8,0x1f,0xff,0xf8,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x07,0x80,0x00,0x03,0xe0,0x00,0x00,0xf8,0x00,0x00,0x3e,0x00,0x00,0x0f,0x80,
0x00,0x03,0xe0,0x00,0x00,0xf8,0x00,0x01,0xf0,0x00,0x07,0xc0,0x00,0x1f,0x00,0x00,
0x7c,0x00,0x01,0xf0,0x00,0x07,0xc0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x01,0xc0,0x00,0x01,0xfe,0x00,0x00,0x7f,0x80,0x00,0x07,0xc0,0x00,0x01,
0xe0,0x00,0x00,0xf0,0x00,0x00,0xf0,0x00,0x01,0xf0,0x00,0x03,0xe0,0x00,0x7f,0xc0,
0x00,0x7e,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0xf8,0x00,0x00,0xf8,0x00,0x00,0xf8,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1f,0x80,0x00,0xff,0xf0,0x03,0xc0,0x78,0x07,0x80,0x1c,0x0e,0x00,
0x0e,0x1c,0x00,0x0e,0x3c,0x00,0x0f,0x38,0x3f,0xc7,0x78,0xff,0xc7,0x70,0xe3,0xc7,
0x71,0xc3,0xc7,0xf3,0xc3,0x87,0xe3,0xc3,0x87,0xe3,0x87,0x8e,0xe3,0x87,0x8e,0xe3,
0xcf,0x8e,0xe3,0xff,0xfc,0x71,0xf9,0xf0,0x70,0x00,0x00,0x70,0x00,0x00,0x38,0x00,
0x00,0x3c,0x00,0x00,0x0f,0x01,0xc0,0x07,0xff,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7e,0x00,0x00,0x7f,0x00,0x00,0xff,
0x00,0x00,0xe7,0x80,0x01,0xe7,0x80,0x03,0xc3,0xc0,0x03,0xc3,0xc0,0x07,0x81,0xe0,
0x07,0x81,0xe0,0x0f,0x00,0xf0,0x0f,0x00,0xf8,0x1f,0xff,0xf8,0x1f,0xff,0xfc,0x3c,
0x00,0x3c,0x3c,0x00,0x1e,0x78,0x00,0x1e,0xf0,0x00,0x0f,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,0xc0,0x1f,0xff,0xf0,0x1e,0x00,
0xf0,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0xf0,0x1e,0x01,0xf0,0x1f,0xff,0xc0,
0x1f,0xff,0xe0,0x1e,0x01,0xf8,0x1e,0x00,0x78,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,
0x00,0x78,0x1e,0x00,0xf8,0x1f,0xff,0xe0,0x1f,0xff,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xf8,0x03,0xff,0xf8,0x07,0xc0,
0x00,0x0f,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,
0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3e,0x00,0x00,0x1e,0x00,0x00,0x0f,
0x00,0x00,0x0f,0xc0,0x08,0x03,0xff,0xf8,0x00,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xff,0x00,0x3f,0xff,0xe0,0x3c,0x01,
0xf0,0x3c,0x00,0x78,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x1e,
0x3c,0x00,0x1e,0x3c,0x00,0x1e,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x78,0x3c,
0x00,0xf8,0x3c,0x07,0xe0,0x3f,0xff,0xc0,0x3f,0xfc,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,0xf0,0x0f,0xff,0xf0,0x0f,0x00,
0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0xff,0xf0,
0x0f,0xff,0xf0,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,
0x00,0x00,0x0f,0x00,0x00,0x0f,0xff,0xf0,0x0f,0xff,0xf0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,0xf0,0x0f,0xff,0xf0,0x0f,0x00,
0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0xff,0xf0,
0x0f,0xff,0xf0,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,
0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xfc,0x03,0xff,0xfc,0x0f,0xc0,
0x04,0x1f,0x00,0x00,0x1e,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x78,0x0f,0xfc,
0x78,0x0f,0xfc,0x78,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3e,0x00,0x3c,0x1f,
0x00,0x3c,0x0f,0xc0,0x3c,0x03,0xff,0xfc,0x00,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,
0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3f,0xff,0xfc,
0x3f,0xff,0xfc,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,
0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,0xf8,0x0f,0xff,0xf8,0x00,0x3c,
0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,
0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,
0x3c,0x00,0x00,0x3c,0x00,0x0f,0xff,0xf8,0x0f,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,0xe0,0x0f,0xff,0xe0,0x00,0x01,
0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,
0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,
0x03,0xc0,0x0c,0x07,0xc0,0x0f,0xff,0x80,0x07,0xfe,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1e,0x00,0x78,0x1e,0x01,0xf0,0x1e,0x03,
0xc0,0x1e,0x07,0x80,0x1e,0x1f,0x00,0x1e,0x3c,0x00,0x1e,0x78,0x00,0x1e,0xf0,0x00,
0x1f,0xf0,0x00,0x1e,0xf8,0x00,0x1e,0x3c,0x00,0x1e,0x1e,0x00,0x1e,0x0f,0x80,0x1e,
0x07,0xc0,0x1e,0x01,0xe0,0x1e,0x00,0xf8,0x1e,0x00,0x7c,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,
0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,
0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,
0x80,0x00,0x07,0x80,0x00,0x07,0xff,0xf8,0x07,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3e,0x00,0x7c,0x3f,0x00,0xfc,0x3f,0x81,
0xdc,0x3b,0x81,0xdc,0x3b,0xc3,0x9c,0x39,0xc3,0x9c,0x38,0xe7,0x1c,0x38,0xef,0x1c,
0x38,0x7e,0x1c,0x38,0x7c,0x1e,0x38,0x3c,0x1e,0x78,0x00,0x1e,0x78,0x00,0x1e,0x78,
0x00,0x1e,0x78,0x00,0x1e,0x78,0x00,0x1e,0x78,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0x00,0x3c,0x1f,0x80,0x3c,0x1f,0xc0,
0x3c,0x1d,0xc0,0x3c,0x1d,0xe0,0x3c,0x1c,0xf0,0x3c,0x1c,0x78,0x3c,0x1c,0x78,0x3c,
0x1c,0x3c,0x3c,0x1c,0x1e,0x3c,0x1c,0x0f,0x3c,0x1c,0x0f,0x3c,0x1c,0x07,0xbc,0x1c,
0x03,0xfc,0x1c,0x01,0xfc,0x1c,0x00,0xfc,0x1c,0x00,0xfc,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xff,0xc0,0x07,0xff,0xf0,0x0f,0x00,
0xf8,0x1e,0x00,0x7c,0x3c,0x00,0x3c,0x3c,0x00,0x1e,0x78,0x00,0x1e,0x78,0x00,0x1e,
0x78,0x00,0x1e,0x78,0x00,0x1e,0x78,0x00,0x1e,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x1e,
0x00,0x78,0x1f,0x00,0xf0,0x07,0xff,0xe0,0x01,0xff,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,0x80,0x1f,0xff,0xf0,0x1e,0x00,
0xf8,0x1e,0x00,0x7c,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x78,
0x1e,0x03,0xf0,0x1f,0xff,0xc0,0x1f,0xfe,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,
0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xff,0xc0,0x07,0xff,0xf0,0x0f,0x00,
0xf8,0x1e,0x00,0x7c,0x3c,0x00,0x3c,0x3c,0x00,0x1e,0x78,0x00,0x1e,0x78,0x00,0x1e,
0x78,0x00,0x1e,0x78,0x00,0x1e,0x78,0x00,0x1e,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x1e,
0x00,0x78,0x1f,0x80,0xf0,0x07,0xff,0xe0,0x01,0xff,0x80,0x00,0x3c,0x00,0x00,0x3c,
0x00,0x00,0x1f,0x06,0x00,0x0f,0xff,0x00,0x01,0xf8,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,0x80,0x0f,0xff,0xe0,0x0e,0x01,
0xf0,0x0e,0x00,0xf0,0x0e,0x00,0xf0,0x0e,0x00,0xf0,0x0e,0x01,0xf0,0x0f,0xff,0xc0,
0x0f,0xff,0x00,0x0e,0x1f,0x00,0x0e,0x07,0x80,0x0e,0x03,0xc0,0x0e,0x01,0xe0,0x0e,
0x00,0xf0,0x0e,0x00,0xf8,0x0e,0x00,0x78,0x0e,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xff,0xf0,0x0f,0xff,0xf0,0x1f,0x00,
0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1f,0x00,0x00,0x0f,0xc0,0x00,0x07,0xfc,0x00,
0x00,0xff,0x80,0x00,0x0f,0xf0,0x00,0x01,0xf8,0x00,0x00,0x78,0x00,0x00,0x78,0x00,
0x00,0x78,0x20,0x00,0xf8,0x3f,0xff,0xe0,0x3f,0xff,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3f,0xff,0xfc,0x3f,0xff,0xfc,0x00,0x3c,
0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,
0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,
0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,
0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,
0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x1e,
0x00,0x78,0x1f,0x00,0xf8,0x0f,0xff,0xe0,0x03,0xff,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf8,0x00,0x0f,0x78,0x00,0x1e,0x3c,0x00,
0x1e,0x3c,0x00,0x3c,0x1e,0x00,0x38,0x1e,0x00,0x78,0x0f,0x00,0x70,0x0f,0x00,0xf0,
0x07,0x81,0xe0,0x07,0x81,0xe0,0x03,0xc3,0xc0,0x03,0xe3,0xc0,0x01,0xe7,0x80,0x00,
0xf7,0x80,0x00,0xff,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x00,0x0e,0x78,0x00,0x0e,0x78,0x00,
0x0e,0x78,0x00,0x1e,0x38,0x00,0x1e,0x38,0x00,0x1e,0x38,0x3c,0x1c,0x38,0x3c,0x1c,
0x38,0x7e,0x1c,0x38,0x7f,0x1c,0x3c,0xe7,0x1c,0x3c,0xe7,0x9c,0x3d,0xc3,0x9c,0x1d,
0xc3,0xdc,0x1f,0x81,0xdc,0x1f,0x80,0xf8,0x1f,0x00,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x00,0x3c,0x1e,0x00,0x78,0x0f,0x00,
0xf0,0x07,0x81,0xe0,0x03,0xc3,0xc0,0x01,0xe7,0x80,0x00,0xff,0x00,0x00,0x7e,0x00,
0x00,0x7e,0x00,0x00,0xff,0x00,0x01,0xff,0x80,0x03,0xe7,0xc0,0x07,0xc3,0xe0,0x0f,
0x81,0xf0,0x1f,0x00,0xf8,0x3e,0x00,0x7c,0x7c,0x00,0x3e,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x00,0x1f,0x3c,0x00,0x3e,0x1e,0x00,
0x7c,0x1f,0x00,0x78,0x0f,0x80,0xf0,0x07,0xc1,0xe0,0x03,0xe3,0xc0,0x01,0xe7,0x80,
0x00,0xff,0x00,0x00,0x7e,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,
0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,0xfc,0x1f,0xff,0xfc,0x00,0x00,
0xf8,0x00,0x01,0xe0,0x00,0x03,0xc0,0x00,0x07,0x80,0x00,0x0f,0x00,0x00,0x1e,0x00,
0x00,0x3c,0x00,0x00,0x78,0x00,0x00,0xf0,0x00,0x03,0xe0,0x00,0x07,0xc0,0x00,0x0f,
0x80,0x00,0x1f,0x00,0x00,0x3f,0xff,0xfc,0x3f,0xff,0xfc,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x01,0xff,0xc0,0x01,0xff,0xc0,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,
0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,
0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,
0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,
0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xff,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0e,0x00,0x00,0x0f,0x00,0x00,0x07,0x00,0x00,0x03,0x80,0x00,0x03,0xc0,
0x00,0x01,0xe0,0x00,0x00,0xe0,0x00,0x00,0xf0,0x00,0x00,0x78,0x00,0x00,0x38,0x00,
0x00,0x3c,0x00,0x00,0x1e,0x00,0x00,0x0e,0x00,0x00,0x0f,0x00,0x00,0x07,0x80,0x00,
0x03,0x80,0x00,0x01,0xc0,0x00,0x01,0xe0,0x00,0x00,0xe0,0x00,0x00,0x70,0x00,0x00,
0x78,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x03,0xff,0x80,0x03,0xff,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,
0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,
0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,
0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x00,0x07,
0x80,0x00,0x07,0x80,0x00,0x07,0x80,0x03,0xff,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x00,0x00,0x7e,0x00,0x00,0xe7,
0x00,0x01,0xc3,0x80,0x03,0x81,0xc0,0x07,0x00,0xe0,0x0e,0x00,0xf0,0x1e,0x00,0x78,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0x80,0x00,0x03,0xe0,0x00,0x00,0xf8,0x00,0x00,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x07,0xff,0xc0,0x07,0xe7,0xf0,0x00,0x00,0xf0,0x00,0x00,0x78,
0x00,0x00,0x78,0x00,0xff,0xf8,0x07,0xff,0xf8,0x0f,0x00,0x78,0x1e,0x00,0x78,0x1e,
0x00,0x78,0x1e,0x03,0xf8,0x0f,0xff,0xf8,0x07,0xfc,0x78,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,
0x00,0x1e,0x00,0x00,0x1e,0x7f,0xe0,0x1e,0xff,0xf0,0x1f,0xc0,0x78,0x1f,0x00,0x78,
0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x38,0x1e,
0x00,0x78,0x1e,0x00,0xf0,0x1f,0xff,0xe0,0x07,0xff,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xff,0xf0,0x03,0xff,0xf0,0x07,0xc0,0x00,0x0f,0x80,0x00,
0x0f,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x0f,0x00,0x00,0x0f,
0x80,0x00,0x07,0xc0,0x00,0x03,0xff,0xf0,0x00,0xff,0xf0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,
0x78,0x00,0x00,0x78,0x01,0xff,0xf8,0x07,0xff,0xf8,0x0f,0x00,0x78,0x1e,0x00,0x78,
0x1e,0x00,0x78,0x3c,0x00,0x78,0x3c,0x00,0x78,0x3c,0x00,0x78,0x1c,0x00,0x78,0x1e,
0x01,0xf8,0x1f,0x03,0xf8,0x0f,0xff,0x78,0x03,0xfc,0x78,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x01,0xff,0xc0,0x07,0xe3,0xf0,0x0f,0x00,0xf8,0x1e,0x00,0x78,
0x1e,0x00,0x3c,0x1f,0xff,0xfc,0x1f,0xff,0xfc,0x1c,0x00,0x00,0x1e,0x00,0x00,0x1e,
0x00,0x00,0x0f,0x80,0x00,0x07,0xff,0xf8,0x01,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x03,0xfc,0x00,0x1f,0xfe,0x00,0x3e,0x00,0x00,0x78,0x00,0x00,0x78,
0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x3f,0xff,0xfc,0x3f,0xff,0xfc,
0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,
0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x70,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x03,0xff,0xfc,0x07,0xc3,0xfc,0x0f,0x00,0xf0,0x1e,0x00,0xf0,
0x1e,0x00,0xf0,0x0f,0x00,0xf0,0x0f,0x83,0xe0,0x0f,0xff,0xc0,0x1e,0x7c,0x00,0x1c,
0x00,0x00,0x1f,0x00,0x00,0x0f,0xff,0xf0,0x0f,0xff,0xfc,0x1e,0x00,0x3c,0x3c,0x00,
0x3c,0x3c,0x00,0x3c,0x1f,0x81,0xf8,0x0f,0xff,0xe0,0x00,0x38,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,
0x00,0x1e,0x00,0x00,0x1e,0x7f,0xe0,0x1e,0xff,0xf0,0x1f,0xc0,0xf0,0x1f,0x00,0x78,
0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,
0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3c,0x00,0x00,0x7e,0x00,0x00,0x7e,0x00,0x00,0x3c,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x0f,0xfe,0x00,0x0f,0xfe,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,
0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,
0x1e,0x00,0x00,0x1e,0x00,0x0f,0xff,0xf8,0x0f,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x03,0x80,0x00,0x07,0xe0,0x00,0x07,0xe0,0x00,0x03,0x80,0x00,0x00,
0x00,0x00,0x00,0x00,0x0f,0xff,0xc0,0x0f,0xff,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,
0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,
0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,0xc0,0x00,0x03,
0xc0,0x00,0x07,0x80,0x1e,0x3f,0x00,0x1f,0xfe,0x00,0x01,0xc0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,
0x00,0x0f,0x00,0x00,0x0f,0x00,0xf8,0x0f,0x01,0xe0,0x0f,0x07,0xc0,0x0f,0x1f,0x00,
0x0f,0x3c,0x00,0x0f,0xf8,0x00,0x0f,0xf8,0x00,0x0f,0x3e,0x00,0x0f,0x1f,0x00,0x0f,
0x07,0xc0,0x0f,0x03,0xe0,0x0f,0x00,0xf8,0x0f,0x00,0x7c,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x0f,0xfe,0x00,0x0f,0xfe,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,
0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,
0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,
0x1e,0x00,0x00,0x1e,0x00,0x0f,0xff,0xf8,0x0f,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x39,0xf9,0xf8,0x3b,0xbb,0xbc,0x3e,0x3e,0x1c,0x3c,0x3e,0x1c,
0x38,0x3c,0x1c,0x38,0x3c,0x1c,0x38,0x3c,0x1c,0x38,0x3c,0x1c,0x38,0x3c,0x1c,0x38,
0x3c,0x1c,0x38,0x3c,0x1c,0x38,0x3c,0x1c,0x38,0x3c,0x1c,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x1e,0x7f,0xe0,0x1e,0xff,0xf0,0x1f,0xc0,0xf0,0x1f,0x00,0x78,
0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,
0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x01,0xff,0xc0,0x07,0xe7,0xf0,0x0f,0x00,0xf8,0x1e,0x00,0x3c,
0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x3c,0x00,0x3c,0x1e,
0x00,0x78,0x1f,0x00,0xf0,0x07,0xff,0xe0,0x01,0xff,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x1e,0x7f,0xe0,0x1e,0xff,0xf0,0x1f,0xc0,0x78,0x1f,0x00,0x78,
0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x38,0x1e,
0x00,0x78,0x1e,0x00,0xf0,0x1f,0xff,0xe0,0x1f,0xff,0x00,0x1e,0x00,0x00,0x1e,0x00,
0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x01,0xff,0xf8,0x07,0xf7,0xf8,0x0f,0x00,0x78,0x1e,0x00,0x78,
0x1e,0x00,0x78,0x3c,0x00,0x78,0x3c,0x00,0x78,0x3c,0x00,0x78,0x1c,0x00,0x78,0x1e,
0x01,0xf8,0x1f,0x03,0xf8,0x0f,0xff,0x78,0x03,0xfc,0x78,0x00,0x00,0x78,0x00,0x00,
0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x0f,0x1f,0xf0,0x0f,0x7f,0xf8,0x0f,0xe0,0x3c,0x0f,0x80,0x3c,
0x0f,0x00,0x3c,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,
0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x0f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x01,0xff,0xe0,0x07,0xe1,0xe0,0x0f,0x00,0x00,0x0f,0x00,0x00,
0x07,0x80,0x00,0x03,0xfc,0x00,0x00,0xff,0xc0,0x00,0x0f,0xf0,0x00,0x00,0xf0,0x00,
0x00,0x78,0x00,0x00,0xf0,0x0f,0xff,0xe0,0x0f,0xff,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,
0x00,0x01,0xe0,0x00,0x7f,0xff,0xf8,0x7f,0xff,0xf8,0x01,0xe0,0x00,0x01,0xe0,0x00,
0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,0xe0,0x00,0x01,
0xe0,0x00,0x00,0xf0,0x00,0x00,0x7f,0xf8,0x00,0x3f,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,
0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x1e,0x00,0x78,0x0e,
0x00,0xf8,0x0f,0x03,0xf8,0x07,0xff,0x78,0x03,0xfc,0x78,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x00,0x3c,0x1e,0x00,0x7c,0x1e,0x00,0x78,0x0f,0x00,0xf0,
0x0f,0x80,0xf0,0x07,0x81,0xe0,0x03,0xc3,0xc0,0x03,0xc3,0xc0,0x01,0xe7,0x80,0x00,
0xe7,0x00,0x00,0xff,0x00,0x00,0x7e,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x78,0x00,0x0e,0x78,0x00,0x1e,0x78,0x00,0x1e,0x38,0x3c,0x1e,
0x38,0x3c,0x1c,0x3c,0x7e,0x1c,0x3c,0x7e,0x3c,0x1c,0xe7,0x3c,0x1c,0xe7,0xb8,0x1d,
0xc3,0xb8,0x1f,0xc3,0xf8,0x0f,0x81,0xf8,0x0f,0x81,0xf0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x1f,0x00,0x7c,0x0f,0x80,0xf0,0x07,0xc1,0xe0,0x03,0xe3,0xc0,
0x00,0xf7,0x80,0x00,0x7f,0x00,0x00,0x3e,0x00,0x00,0xff,0x00,0x01,0xe7,0x80,0x03,
0xc3,0xc0,0x07,0x81,0xf0,0x1f,0x00,0xf8,0x3e,0x00,0x7c,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3c,0x00,0x3c,0x1e,0x00,0x3c,0x1e,0x00,0x78,0x0f,0x00,0xf0,
0x07,0x80,0xf0,0x07,0x81,0xe0,0x03,0xc1,0xc0,0x03,0xc3,0xc0,0x01,0xe7,0x80,0x00,
0xf7,0x80,0x00,0xff,0x00,0x00,0x7e,0x00,0x00,0x3e,0x00,0x00,0x3c,0x00,0x00,0x78,
0x00,0x01,0xf0,0x00,0x7f,0xe0,0x00,0x7f,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x0f,0xff,0xf0,0x0f,0xff,0xf0,0x00,0x01,0xe0,0x00,0x07,0xc0,
0x00,0x0f,0x80,0x00,0x1e,0x00,0x00,0x3c,0x00,0x00,0xf8,0x00,0x01,0xe0,0x00,0x03,
0xc0,0x00,0x07,0x80,0x00,0x0f,0xff,0xf8,0x0f,0xff,0xf8,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x07,0xe0,0x00,0x1f,0xe0,0x00,0x3c,0x00,0x00,0x38,0x00,0x00,0x38,
0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,
0x1f,0xf0,0x00,0x1f,0x80,0x00,0x01,0xf0,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,
0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x78,0x00,0x00,0x38,
0x00,0x00,0x3c,0x00,0x00,0x1f,0x80,0x00,0x0f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,
0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,
0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,
0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,
0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,
0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x3c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x07,0xe0,0x00,0x07,0xf8,0x00,0x00,0x3c,0x00,0x00,0x1e,0x00,0x00,0x1e,
0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x0e,0x00,
0x00,0x0f,0xf8,0x00,0x01,0xf8,0x00,0x0f,0x80,0x00,0x0e,0x00,0x00,0x1e,0x00,0x00,
0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,0x00,0x00,0x1e,
0x00,0x00,0x3c,0x00,0x00,0xfc,0x00,0x07,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xc0,0x00,
0x1f,0xf0,0x1e,0x3c,0x7c,0x1e,0x38,0x1f,0xfc,0x78,0x07,0xf8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};


sFONT Font8x16 = {
  ASCII8x16_Table, 
  8, /* Width */
  16, /* Height */
};

sFONT Font16x24 = {
  ASCII16x24_Table, 
  16, /* Width */
  24, /* Height */
};

sFONT Font24x32 = {
  ASCII24x32_Table, 
  24, /* Width */
  32, /* Height */
};


//选择使用FLASH字模还是SD卡的字模
#if GBKCODE_FLASH

//选择 1:GB2312字模
//选择 0:HZLIB字模(旧版,不建议使用)
#if 1

/*使用FLASH字模*/
//字模GB2312_H1616配套的函数

//中文字库存储在FLASH的起始地址 :
//GBKCODE_START_ADDRESS 在fonts.h文件定义
/**
  * @brief  获取FLASH中文显示字库数据
    * @param  pBuffer:存储字库矩阵的缓冲区
    * @param  c : 要获取的文字
  * @retval None.
  */
int GetGBKCode_from_EXFlash( uint8_t * pBuffer, uint16_t c)
{ 
    unsigned char High8bit,Low8bit;
    unsigned int pos;
    
        static uint8_t everRead=0;
        
        /*第一次使用,初始化FLASH*/
        if(everRead == 0)
        {
            SPI_FLASH_Init();
            everRead = 1;
        }
    
      High8bit= c >> 8;     /* 取高8位数据 */
    Low8bit= c & 0x00FF;  /* 取低8位数据 */        
          
        /*GB2312 公式*/
    pos = ((High8bit-0xa1)*94+Low8bit-0xa1)*WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8; 
        SPI_FLASH_BufferRead(pBuffer,GBKCODE_START_ADDRESS+pos,WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8); //读取字库数据  
//      printf ( "%02x %02x %02x %02x\n", pBuffer[0],pBuffer[1],pBuffer[2],pBuffer[3]);
    
        return 0;  
     
}

#else    //旧版字模HZLIB 配套的函数

//!!HZLIB不支持标点,本函数仅为兼容而保留,不建议使用

/*HZLIB中文字库存储在FLASH的起始地址*/
#define HZLIB_START_ADDRESS   1*4096

//旧版HZLIB字库使用的函数,HZLIB不支持标点
//本函数使用的寻址公式跟GB2312的也稍有区别
int GetGBKCode_from_EXFlash( uint8_t * pBuffer, uint16_t c)
{ 
    unsigned char High8bit,Low8bit;
    unsigned int pos;
        
        static uint8_t everRead=0;
        
        /*第一次使用,初始化FLASH*/
        if(everRead == 0)
        {
            SPI_FLASH_Init();
            everRead = 1;
        }

    
    High8bit= c >> 8;     /* 取高8位数据 */
    Low8bit= c & 0x00FF;  /* 取低8位数据 */    
    
      //本字模使用的寻址公式跟GB2312的稍有区别
    pos = ((High8bit-0xa0-16)*94+Low8bit-0xa1)*WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8;
        //地址指向HZLIB字模的地址HZLIB_START_ADDRESS
        SPI_FLASH_BufferRead(pBuffer,HZLIB_START_ADDRESS+pos,WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8);
//      printf ( "%02x %02x %02x %02x\n", pBuffer[0],pBuffer[1],pBuffer[2],pBuffer[3]);
    
        return 0;  
     
}

#endif




#else //SD卡字模

/*使用SD字模*/

static FIL fnew;                                                    /* file objects */
static FATFS fs;                                                    /* Work area (file system object) for logical drives */
static FRESULT res_sd; 
static UINT br;                                /* File R/W count */

//字库文件存储位置,fonts.h中的宏:
//#define GBKCODE_FILE_NAME            "0:/Font/GB2312_H2424.FON"

/**
  * @brief  获取SD卡中文显示字库数据
    * @param  pBuffer:存储字库矩阵的缓冲区
    * @param  c : 要获取的文字
  * @retval None.
  */
int GetGBKCode_from_sd ( uint8_t * pBuffer, uint16_t c)
{ 
    unsigned char High8bit,Low8bit;
    unsigned int pos;
        
        static uint8_t everRead = 0;
    
    High8bit= c >> 8;     /* 取高8位数据 */
    Low8bit= c & 0x00FF;  /* 取低8位数据 */
        
    pos = ((High8bit-0xa1)*94+Low8bit-0xa1)*WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8;
    
        /*第一次使用,挂载文件系统,初始化sd*/
        if(everRead == 0)
        {
            res_sd = f_mount(&fs,"0:",1);
            everRead = 1;

        }
        
    res_sd = f_open(&fnew , GBKCODE_FILE_NAME, FA_OPEN_EXISTING | FA_READ);
    
    if ( res_sd == FR_OK ) 
    {
        f_lseek (&fnew, pos);        //指针偏移
            
                //16*16大小的汉字 其字模 占用16*16/8个字节
        res_sd = f_read( &fnew, pBuffer, WIDTH_CH_CHAR*HEIGHT_CH_CHAR/8, &br );         
        
        f_close(&fnew);
        
        return 0;  
    }    
    else
        return -1;    
}

#endif
/*----------------------------end of file--------------------------*/


main.c

#include "stm32f10x.h"
#include "./usart/bsp_usart.h"    
#include "./lcd/bsp_ili9341_lcd.h"
#include "./flash/bsp_spi_flash.h"
#include <stdio.h>
#include <string.h>

static void LCD_Test(void);    
static void Delay ( __IO uint32_t nCount );

void Printf_Charater(void)   ;


int main(void)
{    
    //LCD 初始化
    ILI9341_Init ();         

    /* USART config */
    USART_Config();  
    
    printf("\r\n ********** 液晶显示变量示例(整数_浮点数等)*********** \r\n"); 
    printf("\r\n 若汉字显示不正常,请阅读工程中的readme.txt文件说明,根据要求给FLASH重刷字模数据\r\n"); 
    
 //其中0、3、5、6 模式适合从左至右显示文字,
 //不推荐使用其它模式显示文字    其它模式显示文字会有镜像效果            
 //其中 6 模式为大部分液晶例程的默认显示方向  
  ILI9341_GramScan ( 6 );
    
    Printf_Charater();
    
    while ( 1 )
    {
        LCD_Test();
    }
        
}



/*用于测试各种液晶的函数*/
void LCD_Test(void)
{
    /*演示显示变量*/
    static uint8_t testIntCNT = 0;    
    static float testFloatCNT = 0;    
    char dispBuff[100];
    char *pStr = 0;
    
    testIntCNT++;    
    testFloatCNT += 0.1;
    
    LCD_SetFont(&Font8x16);    
    LCD_SetColors(RED,BLACK);
    
  ILI9341_Clear(0,0,LCD_X_LENGTH,LCD_Y_LENGTH);    /* 清屏,显示全黑 */

    /********显示变量示例*******/
    /*使用c标准库把变量转化成字符串*/
    sprintf(dispBuff,"显示整型变量: %d ",testIntCNT);
  LCD_ClearLine(LINE(5));    /* 清除单行文字 */
    
    /*然后显示该字符串即可,其它变量也是这样处理*/
    ILI9341_DispStringLine_EN_CH(LINE(5),dispBuff);
    
    
    /*使用c标准库把变量转化成字符串*/
    sprintf(dispBuff,"显示浮点型变量: %f ",testFloatCNT);
  LCD_ClearLine(LINE(6));    /* 清除单行文字 */
    
    /*然后显示该字符串即可,其它变量也是这样处理*/
    ILI9341_DispStringLine_EN_CH(LINE(6),dispBuff);


    /*使用c标准库把变量转化成字符串*/
    sprintf(dispBuff,"浮点型(保留2位小数): %.2f ",testFloatCNT);
  LCD_ClearLine(LINE(7));    /* 清除单行文字 */
    
    /*然后显示该字符串即可,其它变量也是这样处理*/
    ILI9341_DispStringLine_EN_CH(LINE(7),dispBuff);
    
    
    /********居中显示示例*******/
    LCD_SetTextColor(GREEN);

    pStr = "插入2个英文空格示例";
    //使用 %*c 在字符串前插入指定个数的英文空格
    sprintf(dispBuff,"%*c%s",2,' ',pStr);
    
  LCD_ClearLine(LINE(9));                                                // 清除单行文字 
    ILI9341_DispStringLine_EN_CH(LINE(9),dispBuff);//显示格式化后的字符串

    ILI9341_DispStringLine_EN_CH(LINE(11),"纯英文24x32居中示例:");
    LCD_SetFont(&Font24x32);    
    pStr = "ABCDEF";
    //居中时,要插入的空格个数 = (液晶宽度/单个字体宽度 - 字符串长度)/2
    sprintf(dispBuff,"%*c%s",((LCD_X_LENGTH/(((sFONT *)LCD_GetFont())->Width))-strlen(pStr))/2,' ',pStr);
 
    LCD_ClearLine(LINE(6));                                                    // 清除单行文字 
    ILI9341_DispStringLine_EN_CH(LINE(6),dispBuff);//显示格式化后的字符串
    
    LCD_SetFont(&Font8x16);    
    pStr = "中文居中示例";
    //居中时,要插入的空格个数 = (液晶宽度/字体宽度 - 字符串长度)/2
    //strlen计算长度时,一个中文等于2个字节,即2个英文字符,而且插入的是英文空格
    //所以用(WIDTH_CH_CHAR/2)来计算字体宽度
    sprintf(dispBuff,"%*c%s",(LCD_X_LENGTH/(WIDTH_CH_CHAR/2)-strlen(pStr))/2,' ',pStr);
  
    LCD_ClearLine(LINE(15));                                                    // 清除单行文字 
    ILI9341_DispStringLine_EN_CH(LINE(15),dispBuff);    //显示格式化后的字符串
    
    
    pStr = "含英文居中示例ABCDEFG";
    //居中时,要插入的空格个数 = (液晶宽度/字体宽度 - 字符串长度)/2
    //strlen计算长度时,一个中文等于2个字节,即2个英文字符,而且插入的是英文空格
    //所以用(WIDTH_CH_CHAR/2)来计算字体宽度
    sprintf(dispBuff,"%*c%s",(LCD_X_LENGTH/(WIDTH_CH_CHAR/2)-strlen(pStr))/2,' ',pStr);
 
    LCD_ClearLine(LINE(16));                                                // 清除单行文字 
    ILI9341_DispStringLine_EN_CH(LINE(16),dispBuff);//显示格式化后的字符串
    
    Delay(0xffffff);
}


/**
  * @brief  简单延时函数
  * @param  nCount :延时计数值
  * @retval 无
  */    
static void Delay ( __IO uint32_t nCount )
{
  for ( ; nCount != 0; nCount -- );
    
}



/*"当"字符的字模16x16 */       
unsigned char charater_matrix[] =    
{ /*"当",0*/
0x01,0x00,0x21,0x08,0x11,0x08,0x09,0x10,0x09,0x20,0x01,0x00,0x7F,0xF8,0x00,    0x08,
0x00,0x08,0x00,0x08,0x3F,0xF8,0x00,0x08,0x00,0x08,0x00,0x08,0x7F,0xF8,0x00,0x08,

};   
  
/**
  * @brief  使用串口在上位机打印字模
    *                    演示字模显示原理
  * @retval 无
  */
void Printf_Charater(void)   
{   
    int i,j;   
    unsigned char kk; 
  
    /*i用作行计数*/
  for ( i=0;i<16;i++)   
    {   
        /*j用作一字节内数据的移位计数*/
        /*一行像素的第一个字节*/
    for(j=0; j<8; j++)   
    {      
            /*一个数据位一个数据位地处理*/
      kk = charater_matrix[2*i] << j ;  //左移J位          
            if( kk & 0x80)     
            {   
                printf("*"); //如果最高位为1,输出*号,表示笔迹
            }   
            else  
            {   
                printf(" "); //如果最高位为0,输出空格,表示空白  
            }   
    }   
        /*一行像素的第二个字节*/
    for(j=0; j<8; j++)   
        {              
      kk = charater_matrix[2*i+1] << j ;  //左移J位   
       
            if( kk & 0x80)         
            {   
                printf("*"); //如果最高位为1,输出*号,表示笔迹   
            }   
            else  
            {   
                printf(" "); //如果最高位为0,输出空格,表示空白 
            }   
        }         
    printf("\n");    //输出完一行像素,换行 
    }   
    printf("\n\n");         //一个字输出完毕
}   

实验现象

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
关于 OLED 显示浮点数,一般可以通过将浮点数转换为字符数组,然后将字符数组显示在 OLED 屏幕上来实现。具体实现方法可以参考下面的代码: ```C #include <stdio.h> #include <stdlib.h> #include <string.h> // OLED 显示 void OLED_ShowString(uint8_t x, uint8_t y, uint8_t *chr, uint8_t Char_Size) { uint8_t c = 0,i = 0,j = 0; switch(Char_Size) { case 16: { while (chr[j]!='\0') { c = chr[j]-32; if(x>112){x=0;y+=16;} OLED_Set_Pos(x,y); for(i=0;i<8;i++) OLED_WR_Byte(F8X16[c*16+i],OLED_DATA); OLED_Set_Pos(x,y+8); for(i=0;i<8;i++) OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA); x+=8; j++; } } break; case 12: { while (chr[j]!='\0') { c = chr[j]-32; if(x>116){x=0;y+=12;} OLED_Set_Pos(x,y); for(i=0;i<6;i++) OLED_WR_Byte(F6x8[c][i],OLED_DATA); x+=6; j++; } } break; } } // 浮点数转换为字符数组 void FloatToStr(float f, char *str) { int i = 0; int integer = (int)f; // 取整数部分 float decimal = f - integer; // 取小数部分 if (integer < 0) // 处理负数 { integer = -integer; decimal = -decimal; str[i++] = '-'; } // 转换整数部分 if (integer == 0) { str[i++] = '0'; } else { while (integer > 0) { str[i++] = integer % 10 + '0'; integer /= 10; } } // 转换小数部分 str[i++] = '.'; decimal = decimal * 1000000; integer = (int)decimal; if (integer == 0) { str[i++] = '0'; } else { while (integer > 0) { str[i++] = integer % 10 + '0'; integer /= 10; } } str[i] = '\0'; // 反转字符数组 for (int j = 0; j < i / 2; j++) { char temp = str[j]; str[j] = str[i - j - 1]; str[i - j - 1] = temp; } } // 测试函数 void test() { float f = 3.1415926; char str[20]; FloatToStr(f, str); OLED_ShowString(0, 0, (uint8_t *)str, 16); } int main() { test(); return 0; } ``` 在上面的代码中,`FloatToStr()` 函数将浮点数转换为字符数组,`OLED_ShowString()` 函数将字符数组显示在 OLED 屏幕上。具体的显示方法可以根据自己的 OLED 屏幕型号和驱动芯片进行调整。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

竹烟淮雨

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值