本文详细介绍了如何在STM32单片机上使用C语言编写驱动程序，实现与AW9523B模块的IIC通信。通过实例代码，解析了IIC通信协议的关键步骤，包括初始化、发送和接收数据，帮助开发者更好地理解和应用AW9523B在物联网项目中的功能。
/** Registers */
/* 读为1，写为0 */
#define AW9523B_KeyMode_DeviceAddre 0xB0 ///< Device Addres for AW9523B
#define AW9523B_LedMode_DeviceAddre 0xB6 ///< Device Addres for AW9523B
#define AW9523B_REG_ID 0x10 ///< id register
#define AW9523B_ID 0x23 ///< id value
#define AW9523B_P0_IN_STATE 0x00 ///< P0 port input state
#define AW9523B_P1_IN_STATE 0x01 ///< P1 port input state
#define AW9523B_P0_OUT_STATE 0x02 ///< P0 port output state
#define AW9523B_P1_OUT_STATE 0x03 ///< P1 port output state
#define AW9523B_P0_CONF_STATE 0x04 ///< P0 port config state
#define AW9523B_P1_CONF_STATE 0x05 ///< P1 port config state
#define AW9523B_P0_INTE_STATE 0x06 ///< P0 port interrupt state
#define AW9523B_P1_INTE_STATE 0x07 ///< P1 port interrupt state
#define AW9523B_REG_GLOB_CTR 0x11 ///< Global control register
#define AW9523B_P0_LED_MODE 
最低0.47元/天 解锁文章
1634
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
