LETO Phase Only Spatial Light Modulator (Reflective)
?-
LETO Phase Only Spatial Light Modulator
http://holoeye.com/wp-content/uploads/leto_spatial_light_modulator.jpgla -
LETO SLM Display
http://holoeye.com/wp-content/uploads/leto_spatial_light_modulator_display.jpgDisplay Closeup of LETO Phase Modulator
la -
LETO SLM
http://holoeye.com/wp-content/uploads/leto_slpatial_light_modulator_holographic_projection.jpgLETO SLM in Holograhic Projection Setup
la -
LETO SLM Display Closeup
http://holoeye.com/wp-content/uploads/leto_spatial_light_modulator_addressed_lens.jpgLETO - Addressed Lens Structures
la
![德国Holoeye推出新型空间光调制器LETO <wbr>Phase <wbr>Only <wbr>Spatial <wbr>Light <wbr>Modulator& 德国Holoeye推出新型空间光调制器LETO <wbr>Phase <wbr>Only <wbr>Spatial <wbr>Light <wbr>Modulator&](https://i-blog.csdnimg.cn/blog_migrate/a4c26d1e5885305701be709a3d33442f.gif)
LETO Phase Only Spatial Light Modulator
![德国Holoeye推出新型空间光调制器LETO <wbr>Phase <wbr>Only <wbr>Spatial <wbr>Light <wbr>Modulator& leto-phase-only-spatial-light-modulator](https://i-blog.csdnimg.cn/blog_migrate/a4c26d1e5885305701be709a3d33442f.gif)
![德国Holoeye推出新型空间光调制器LETO <wbr>Phase <wbr>Only <wbr>Spatial <wbr>Light <wbr>Modulator& leto-slm-display](https://i-blog.csdnimg.cn/blog_migrate/a4c26d1e5885305701be709a3d33442f.gif)
![德国Holoeye推出新型空间光调制器LETO <wbr>Phase <wbr>Only <wbr>Spatial <wbr>Light <wbr>Modulator& leto-slm](https://i-blog.csdnimg.cn/blog_migrate/a4c26d1e5885305701be709a3d33442f.gif)
![德国Holoeye推出新型空间光调制器LETO <wbr>Phase <wbr>Only <wbr>Spatial <wbr>Light <wbr>Modulator& leto-slm-display-closeup](https://i-blog.csdnimg.cn/blog_migrate/a4c26d1e5885305701be709a3d33442f.gif)
LETO Spatial Light Modulator – Microdisplay Features | |
Display Type: | Refelctive LCOS (Phase Only) |
Resolution: | 1920 x 1080 |
Pixel Pitch: | 6.4 μm |
Fill Factor: | 93 % |
Active Area / Diagonal | 12.5 x 7.1 mm (0.55″ Diagonal) |
Addressing | 8 Bit (256 Grey Levels) |
Signal Formats | HDMI – HDTV Resolution |
Frame Rate | 60 Hz |
The LETO phase modulator is based on a reflective LCOS microdisplay with full HD (1920 x 1080 pixel ) resolution. With a pixel pitch of only 6.4 μm and a small interpixel gap of 0.2 μm the LETO SLM provides a high fill factor of 93% and thereby a high light efficiency.
The LETO Spatial Light Modulator is usable for the 400-1100 nm range and the modulator provides a phase shift of 2 π up to 850 nm. The device is delivered with a linear 256-level phase response for the specified user wavelength. The adaptation of the device settings for different operating wavelengths to a linear 2 π phase response can be done by straight forward gamma correction using the supplied calibration software.
The LETO Spatial Light Modulator offers a reflectivity of ~ 75%. Due to the optimized design of the LCOS microdisplay the LETO SLM shows low cross talk between the pixels resulting in high effective spatial resolution. The device offers diffraction efficiencies of more than 80% (16 level blazed grating) which leads to a total light efficiency of ~ 60%.
Download PDF: Brochure Spatial Light Modulators
Special Features: | |
- Reflective LCOS Microdisplay | - Phase Only Modulation |
- Small Interpixel Gaps | - 6.4 μm Small Pixel Pitch |
The LETO phase only modulator devices can simply be addressed like an external monitor using the standard HDMI interface of the graphics card. No additional software or special hardware is needed to operate the SLM.
LETO Spatial Light Modulator Kit – Contents:
LETO Spatial Light Modulator – Scope of Supply |
LETO SLM Driver Box |
Phase Only Display incl. Flex Cable (1920 x 1080 Pixel) |
HDMI-cable & DVI/HDMI-cable |
USB Cable |
Power Supply |
Operating Instruction / Manual |
Data Medium (CD or USB Flash Drive) with Manual, Calibration Software and Application Software |
LETO Phase Modulator – Software Features:
The LETO phase only modulator devices can simply be addressed like an external monitor using the standard HDMI interface of the graphics card. No additional software or dedicated hardware is needed to operate the SLM.
For advanced callibration the LETO device uses a convenient standaed USB interface and a Java based GUI callibration software. The software can be used to change geometrical settings, brightness, contrast and the electrooptical response by applying a new gamma curves.
Besides that, a HOLOEYE SLM Application Software is provided with the device. Key features of which are:
- Computation of computer generated holograms (CGH) from user defined images
- generation of SLM signals representing basic optical functions such as lenses, gratings, axicon and vortex functions
- superposition of CGH’s with basic optical functions to combine functionalities
LETO Software Features | |
SLM Callibration Software | Brightness / Contrast / Geometry / Gamma Control |
SLM Application Software | Basic DOE computations; Generation of optical functions (Circular Aperture, Fresnel Zone Lens, Axicon, Single and Double Slit …); Gratings (incl. Blazed and Sinusoidal) |